Network logic in work order

Hi All,
I have a requirement to implement a standard logic in my custom program for network in work order.
Network - Goto IW32 ...eneter order no. then in menu bar->Goto->Grphics->Network structure.
Is there FM or BAPI which i can use for this functionality..
I have debugged the standard program and one FM : CO_VG_GRAPHIK .Its working fine for Dsipaly mode..but if i go in change mode and try to modify it ..its giving message that order is not locked..when i checked CAUFVD_BT-FLG_ENQ is not getting set even though i enqueued the order.....
Thanks in Advacnce
Edited by: pbhosey on Feb 16, 2011 6:37 AM

Hi Guru's
I am able to implement the stabdard functionality..but iam facing one issue.
Whenever i go in dispaly mode and open the network in my cunstom porgram. After that The network show the screen of od display mode only..even if iam in change mode...

Similar Messages

SAP Printers and Mass Printing of SAP Work Orders

Good day Experts,
We have a printer related issue especially mass printing of Work Orders. We have discovered that printing a list
of work orders takes longer with intervals of 10min up to an hour, as compared to printing smaller list(1-5 etc)
We are not certain whether this problem originates from the Network or SAP. The problem is not one of uniform nature,
changes frequently, Sometimes better and sometimes worse.
Please advise me.
Thank you.
Regards,
Sibusiso

hi,
There could be many reason behind this
1. Logic put to fetch data without key fields
2. unwanted code
3. Using System status search
4. getting data from User status tables such as JCDS
just check by giving print with one order, even if it results in performance issues, then it requires Fine tuning
you have to check with developer to removed unwanted code
regards,
santosh

Change Maintenance Work Order Detail Report in Print WO page

Hello,
I would like to ask you for your help. We would like to have different report in Print WO function than Maintenance Work Order Detail Report. I mean SSM responsibility > Search for WOs > click Print WO icon. We applied patch #9871500 (I found it there: Templates associated to datadefinitions other than 'EAMWRREP' are not shown in the Work Order Detail report in EAM [ID 1209703.1]). I did personalizations steps - I defined new data definition (for example TEST) and report with data definition TEST is shown in the option on Print WO page now... But how should I it define to have correct result? What should be defined in Executable, Concurrent Program, Data Definition and Data Template? I have RDF and RTF files for this report. We are using different SQL than it is used in the original report. How could be used our SQL defined in RDF?
Thanks, Regards,
Jitka

Hi,
1) You can choose to select and Print shop paper when you need.No enhancement is required.
2) There is not an option in standard to say Print/Not print Long text . You will have to replace the standard form with a custom form and build the logic to print /Not Print long text based on your rules.
Regards
Narasimhan

Error creating work order for new notification - Related SyncBO not present

Hi,
We are working with MAM3.0 standard application.
We age getting an error while creating work order for a NEW notification.
In this scenario both notification and corresponding work order are also not created.
Here is the error for MAM30001 Sync BO in MEREP_MONI:_
Reading inbox record (mobile ID=0000001444, seq, no.=29, rcd_cntr=1, data=TOP0001000000
External format successfully converted to internal format: ldata=TOP0001000000000000000
Related SyncBO MAM30_010 with Sync key 0000000028 is not present on the device.
Return code 1 (DOWNLOADER)
   Here is the error for MAM30010 Sync BO in MEREP_MONI:_
Return code from RFC BAPI Wrapper call:Order NEW does not exist
Return code from RFC BAPI Wrapper call:The order/network type is not defined
Return code from RFC BAPI Wrapper call:Order NEW does not exist
Return code 0 (UPDATE MEREP_506-STATUS)
Can any body please tell me what is the sollutions for this error
your help in this regard is appreciable.
Regards,
Murthy

Hi Murthy,
II have no idea what patch level you are on. A while back we had similar issues with some clients. There are several patches around that area available. Perhaps you should have a look into patch 959732.
Hope that helps.
Regards,
Oliver

[Solved] Network doesn't work after hibernate?

Hello! This is my first legit Linux install so excuse me if I'm a bit slow. I installed Arch last night and everything went smoothly. However, after I tested out hibernate on my machine, the network doesn't seem to work. Just prior to the hibernate, I installed Pidgin and Skype but they worked alright, so I think that the hibernate caused a problem on eth0.
I have an Asus P8Z68-V Pro motherboard with an Intel 82579V Gigabit Ethernet Controller that's using the e1000e driver. Running "dmesg | grep e1000e" says that it is up.
I'm not entirely clear here, but from reading, I think that I have several ways of connecting to the network, including network, dhcpcd, networkmanager, and wicd. I am using wicd so I did the following (or at least I think I am only using wicd):
#rc.d stop network
#rc.d stop dhcpcd
#rc.d stop networkmanager
Similarly, I put a ! in front of network in rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=()
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="Vicious"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng dbus !network netfs crond wicd)
Restarting eth0 through wicd-cli still did not work. I also tried resuscitating the network via instructions on the configure network page before trying to focus solely on wicd.
I found a few similar problems on the forums by searching "wicd hibernate" and tried several solutions but they did not work. Several problems seem to be that the network doesn't work after a suspend because I guess the stuff in RAM did not get saved? But people were able to restart the network by running "/usr/lib/wicd/autoconnect.py" and I wasn't able to get this to work. As a final effort, I added "resume" into mkinitcpio.conf and placed the machine into sleep again to see if it may magically reset something but of course this did not happen .
mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata resume filesystems usbinput"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
Not sure if my fstab.conf is useful but if this has something to do with settings getting "lost" in swap, here it is. Linux is on an SSD and HDD (sda and sdc) and Windows 7 is on a HDD (sdb).
fstab.conf:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /tmp tmpfs nodev,nosuid,noatime,size=2000M,mode=1777 0 0
/dev/sda1 / ext4 defaults,noatime,discard 0 1
/dev/sda2 /home ext4 defaults,noatime,discard 0 2
/dev/sdc1 /boot ext4 defaults 0 1
/dev/sdc2 /var ext4 defaults 0 0
/dev/sdc3 swap swap defaults 0 0
/dev/sdc4 /media/data ext4 defaults 0 0
shm /dev/shm tmpfs nodev,nosuid,size=10G 0 0
Is wicd causing these problems or did I configure something else improperly? Would appreciate any help to get eth0 up again!
Last edited by TheBigCow7 (2011-09-13 17:57:20)

Ok, I think I've made some progress! Hibernate definitely affects my network connection. Could this be a kernel 3.0 problem?
I noticed that ifconfig showed eth0 without an inet addr, just an inet6 addr for the longest time. e1000e seemed to be loading up ok. I'm not certain here, but I think that meant the dhcp settings didn't stick, or something along those lines.
Trying to use dhcpcd like the instructions here did not work. By some chance, one attempt did work and while it did, I downloaded and installed dhclient. After that one successful attempt, renewing the DHCP lease via dhcpcd did not work again.
Luckily though, I found that running "dhclient eth0" worked. My DHCP settings seemed to have somehow gotten messed up after my initial, problematic hibernate to the point where none would stick, even after a reboot. Manually typing in "dhclient eth0" would get eth0 working, so I decided to add it to the bottom of /etc/rc.local, like in the example on the networking page.
Now, eth0 works after a boot. However, after the daemons load up during the boot process, my computer takes a long time to get to the login prompt (this is relatively speaking, since I am on a SSD and the boot process used to be blazing fast before). I'm pretty sure it's because I added "dhclient eth0" to /etc/rc.local.
I should say that even with these changes, after a hibernate, my eth0 still does not work and if it weren't for the edit to /etc/rc.local, eth0's inet settings would still not stick after a reboot (that is to say, the hibernate does do something to my network settings).
Is this the correct/most efficient way to fix my DHCP problem? Can I fix my "eth0 after hibernate" issue? Also, can I make my DHCP settings boot up without changes to /etc/rc.local so that I can get a fast boot again (still not sure how it was able to work before without my edit)?

Material Availability check during work order creation and Release

Hello All,
We are checking material availability at creation as well as release
Say we have Material XYZ=100 in stock MMBE
Now XYZ =100 is say at normal storage location =75
and scrap storage location=05 and serviceable =20
Currently when availability check is performed it checks for 95 (It excludes scrap storage location 05 )
but we want Availability check to be only for normal stock =75 and not for Serviceable and Scrap location
how to do this in configuration or via exits
Since if the material is under Scrap location it is not counting in Availability check at work order creation this logic is working fine but I do know from where this control is put that when the material is in the stock of scrap it is not counting in Availability check for work orders.Same thing I want to extend it to Serviceable stock .
Why not it is consider it for Scrap storage location , what is config or any MM enhancement
So that when Availability check run it will not consider Materials at SCRAP as well as SERVISABLE storage location also.
Please have your views on this
Regards
pratap

Hello
There are two option for your requiement
1. Changing the status of the servisable storage location stock to restricted use stock . You can include or exclude this stock status material in OPJJ. This solution is not storage location dependent. It is stock status dependent.
2. Please refer the enhancement for the storage location determination. I am not sure about this funtionality:
For production orders the following enhancement is available:
PPCO0005 enhancement for storage loc. determination/backflushing
You can use this enhancement to change the storage location and the indicator 'backflushing' in the reservation.
The enhancement PPCO0005 contains the following enhancement components:
Function exit
EXIT_SAPLCOSD_001 storage location determination/backflushing
You can find the description in modification text of the function exit.
You can find an example of the user exit in the function group XC01 in the include LXCO1F05.
warm regards
Ramakrishna

I have an iMac(Intel) Desktop computer. I cannot print anything as it is telling me that it is "offline" How do I start it working again? My Lexmark Printer is in working order as I have just photocopied a document successfully.

I have an iMac (Intel) Desktop computer. It will not send a message to my Lexmark printer because it says "offline". My Lexmark printer is in working order as I have just successfully photocopied a document on it.

That message means that the computer cannot see the printer on its network.
Is the printer directly connected to the computer with a USB cable, or is it a network printer (either wireless, or wired to the router with an Ethernet cable)?
Matt

How to get Network Printing to work with Brother!!

So i have my BROTHER DCP-7020 printer connected to my Windows machine and i've been sharing the printer on the network with my old iMac 24' which prints perfectly. Now i have the 27' imac and i have no idea why it won't do printing via network, plugging in USB works fine, i've installed the driver but it doesn't look like it did anything. It just worked on my 24' without any hassle, it gets detected in the "Printer Settings" automatically and i dont recall doing anything to get it to work before.
Can anyone give me some tips of why it won't print and what I need to do in order to get network printing to work on my new Mac?
By the way BOTH MACHINE runs SNOW LEOPARD.
Thanks in advance.

Here's the troubleshoot: http://support.apple.com/kb/HT1404
And here is the manual method: http://support.apple.com/kb/HT3049
Hope this helps!

How to refer the work order status value from a different transaction in the step handler?

Hi All,
I have a requirement to check the status of the work order from a different transaction before doing some logic in the current transaction. The following transactions are done to replicate the issue
1)changing the status to ONSITE to edit the work order (transaction 1)
2)Adding some information which will do some logic (transaction 2)
3)Completing the work order (transaction 3)
The transaction 2 will have some logic and will be executed only if the status is COMP but even though the status is COMP now (transaction 3) my condition check in the logic is showing as ONSITE status(transaction.status=ONSITE) and it fails. How can i get the latest status of the work order in the device? Please advice

Hi Jason,
The CompleteWorkOrderFinish sub action does have Apply action (screenshot 1) and the transaction definition (screenshot 2)of CompleteWorkOrderFix transaction with the only property Status which has the following settings (screenshot 3)
Also I am trying to add a status property in EditMeterFitDetaisl transaction and update this value with the current status of the work order using object collections filtering with key value. Please let me know if that approach can be followed. Thanks

Work Order check while completing PM Notification

Dear Friends,
I want a check in my PM Notification. while the notification is completed the related work order status should be "Technically completed". Can this be achieved by config?
thanks & regards,
Sudhahar R

Hi,
There is no configuration that allows this type of check.
You could use a exit such as QQMA0014 to prevent completion based on your own logic.
Possibly prevent notification completion when there is a order attached, then notification can only be completed when order is completed from IW32.
-Paul
Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS topics

Work order settlement issue

Hi
I am not an expert in Work orders and appreciate your input.
A work order has been settled to a Sales order ( I can't understand the logic behind settling to a Sales Order). The Profit centre assigned to the sales order is wrong. I.e. they need it to be the same as that in the work order.
1) Is it possible to reverse the settlement and
2) change the profit centre in the Sales order
3) Change the settlement rule of the work order
The user informed the reason to settle the work order is just merely to close the work order. Is it mandatory to settle the work order in order to close. If so could you please explain the logic behind the requirement?
Thanks & Regards
Nadini

Hey Vanessa,
Sorry i have been really busy with work off late. I just got a moment and wanted to thank you for the help.
I found a solution for it, we had FMDERIVE default the fund on the accounts used in WIP settlement as they are dedicated for those process.
The cost is picked from the order and deposited on the P&L account which is now attached to the fund and this is further transferred to the balance sheet account with the fund information.
Problem solved.
Do you see any other implications on this?
Thanks again.
Pradeep

Item category limit (B) in frame work order

Is it that item category B (limit) is mandetory in frame work order ? In that case it should appear by default. Can we use any other item category with frame work order logically?

first the question is why do we use frame work order when we already have other document ype avilable
answer is when ever we need to create a po for a validity period then frame work order is used
next thing why do we use u=item category B or limit
answer genrally frame. work order is used as blanket po means for those comodities which r procured very frequently but there monetrey value is very less
and ur not intersted in doing there godd reciept u will be directly going for invoice reciept

Regarding work order urgent pls

Hi,
     i have a requirement where i need to get the time slots dynamically which i need to use in select query to retrieve data.
the time slots are,
S1 : 8-10 AM
S2 : 10-12
S3 : 12-14
S4 : 14-16
AM : 08-12 and goes on upto 20.00 PM
when u open a workorder in iw33 transaction in the location tab u can find an ABC indicator where we are using these time slots for the work order.
Now my problem is to select the work orders based upon the current systime and timeslot.
For eg:   if user executes the report say at 10.00 AM he should get all the work orders falling in the time slots S1. in the same way if he executes the report at 12.00 he should get work orders falling in the time slot S1,S2,AM and the user may execute the report at any time.
can anyone suggest how to implement the code and is there any functional module which takes current time and gives the time slots as output.
In the standard workorder u wont find the time slots as S1, S2,S3 u will find it as A,B,C,D in ABC indicator field of location tab.
pls urgent help me and surely u can expect points.
Message was edited by:
        Ravi Kumar Gunda

can you make use of the logic as
sy-uzeit+0(2) --> hrs cnt like
08
10
12
14 16
into variables and
case timeslot.
when
endcase .
vl = lower value
vh = higher value and then substitute the same in the
say user has entered a time of 11:40 am
then set the lower value to 8
and higher to 12
vl = 8
vh = 12
do this in the case endcase.
select query
select f1 f2 ...
        fx   between   vl and vh .
regards,
vijay

My Thunderbold mobile network doesn't work!!!

I am having issues with my mobile network on my thunderbolt. Sometimes it won't even connect to my mobile network (4G LTE) to allow me access to the internet and when I am my wifi range is the only way I can get internet. Sometimes it won't even connect to my mobile network!! Can someone please help me!!! I don't know if I have an option pressed that I didn't know about or what, but it is very frustrating and I didn't pay 250 bucks for this phone to not have my 4G LTE mobile network not to work!.
Thanks
Casey

I have that problem sometimes also. I put an app from the market called LTE OnOFF - HTC Thunderbolt and it's free. The app is by Cunning Logic ans is for the thunderbolt only. It's basically a widget you can add to your Homescreen
and saves digging thru menus. You use it to turn off or on 3g & 4g or 4g only. I put My phone in 4g mode only and 90% of the time it will stay in 4g mode. I hope this helps.
A Newbie

Is there a process for moving costs from maintenance work orders to capital

Is there a process for moving costs from maintenance work orders to capital projects?
We have reversed the settlements on the work orders, and then trying to put the relevant NWA in , then receive error message :
Rule for allocation of PM order to PS network is not maintained.

hi
check the allocation structure and the settlement related customization settings.

Network logic in work order

Similar Messages

Maybe you are looking for