Network login fails on airport
Hi there, I have a bunch of macs with 10.5.2 client, connected to an Airport Extreme base and bound to OD on 10.5.2 server.
I was just wondering if anyone else has this problem: every time I turn on the mac, and try to login, it waits for like a minute, then it logs in with the mobile account cached password, and I get an error relative to the automounts at login (because we didn't authenticate with the server).
Logging out and in immediately solves the problem, and I can access all the resources.
What I reckon, is that at boot the Airport is not connecting until somebody actually logs in. Does somebody else experience this? Any solutions?
Cheers,
Max
are you using DHCP, I have noticed leopard clients extremely slow obtaining a IP address from leopard 10.52 server (OD master) via DHCP (on the server) tiger clients obtain IP within a few seconds, leopard clients probably over a minute. same thing if the leopard clients sleep then wakeup. leopard clients aren't picking up the OD search base either. I have to manually enter the OD
this is testing on a wired network
I'm yet to test it on the wireless network
I haven't tried the leopard clients with fixed IP's
once the leopard clients have an IP address auto mounts work fine
what may be happening is users are logging in
DHCP is not giving them an IP address until well after the time it takes the
auto mounts attempt to connect to the server. by the time the user logs out and back in DCHP has allocated an address and the auto mounts can find the server.
this would depend on how are you authenticating to the wireless
incidentally leopard clients connecting to tiger OD master via DHCP don't suffer the same delay
Similar Messages
-
Deployment issue - Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
I am attempting to deploy a site from my development PC to my server. I have no issues running the site on the server using VS2010 Express Web in debug. All page queries are working within the debugger. The connection strings are identical between the PC
and Server, except the host name.
connectionString
="Data
Source=SOCIALSERVER;Initial Catalog=Intake_be;Integrated Security=True"
However, when using the site normally via IIS, the pages containing data access are failing with a permissions problem. The non-data access pages render normally.
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
Looking at the SQL2005 instance via SQL Management Studio, I see security folder with Logins under the Server. NTA\NS is listed as a user login. But, I also see similar folders under each
of 3 databases. NTA\NS is not listed as a login specific to my target dB.
My site is for internal (intranet) use only. There is no internet access into my IIS. This is my first deployment into production. I think I only need Windows Authentication but I lack the experience to make a good decision. My goal is to allow domain users
to access pages that produce read only data. But, I also need controlled access to pages that can modify data. I used the native winform template for ASP.NET 4, which includes some roles based security.
How do I grant permissions for internal users on the pages that access SQL data? How does that security model work with the native roles based security? i.e.
add
name="AspNetSqlMembershipProvider"type="System.Web.Security.SqlMembershipProvider"connectionStringName="ApplicationServices"...
etc.
Thanks for your time and patience on this Deployment 101 type issue.
Kurthi,
You receive either of these error messages specifically when you use integrated security.
To resolve you can use one of below.
Method 1: Programmatically change the security context of the ASP.NET worker process to a user who has the correct SQL Server permissions.
Method 2: Change the default configuration of ASP.NET so that the ASP.NET worker process starts and runs under the context of a user who has the correct permissions in SQL Server.
Method 3: Grant the correct permissions in SQL Server so that the ASPNET account (or NetworkService account, for an application that runs on IIS 6.0) has the appropriate access to the required resources.(Go to the Computer Management >> Local User and
Groups >> Groups >> Right Click and go to properties on IIS_IUSRS >> Add appropriate user.
Thanx, Mark as answered if you are ok .. -
Installed latest version of iTunes, now I cannot play music through my Airport Express. I'm seeing the message "An error occurred while connecting to the AirPlay device "living room". The network connection failed..."Living room" is what I named the is what I named The AirPlay function of the Aport Express. Thanks!
I have the same problem - did you solve it?
-
Hi,
I have a windows 2008 R2 Enterprise servers with standalone MS-SQL 2008 R2 named instance. The server is having two networks, once production and the second for backup. The server FQDN is resolving to the production IP. The backup NIC
DNS dynamic update is disabled and an "A" record is registered with the dns. While trying to connect to the instance using the management studio:
Successfuly able to connect using the instance name, the production hostname, production IP and backup IP.
but while trying to connect to the insance using the backup hostname getting the below error:
"Login failed. The login is an untrusted domain and cannot be used with windows authentication. (Microsoft SQL server, Error: 18452) "
This is required for the backup tool to get connected using the backup FQDN of the server.
Should I need to create a host name alias, request you to kindly assist me with the best recommedation to fix this.
http://blogs.msdn.com/b/dbrowne/archive/2012/05/21/how-to-add-a-hostname-alias-for-a-sql-server-instance.aspxHi,
It might be a kerberos issue. Check that there are valid SPN's registered using the setspn utility - http://technet.microsoft.com/en-us/library/cc731241.aspx
Thanks, Andrew
My blog... -
During Apple TV setup, I have not been able to complete the Home Sharing process. Computer/iTunes Home Sharing is setup, but ATV "blocks" its Home Sharing setup. After my Apple ID and password is entered, ATV reports a failure. Also, attempts to login to iTunes from ATV, ATV reports: "iTunes login failed - cannot sign-in until Network date and time has been set". It directs me to the Network tab, but there's no option to set date and time. I have no clue how to do that.
Help!!! Thanks in advance to anyone who knows how to solve this.Welcome to the Apple Community.
There are things to look out for to make sure your Apple TV can reach the network time server, such as ensuring port 123 is open and only using the DNS address provided by your ISP, but since it was OK one moment and not the next, my guess is these settings are already correct.
As for the restart, did you try restarting by removing ALL the cables for 30 seconds. -
SSL VPN, "Login failed" and "WebVPN: error creating WebVPN session!"
Hi,
Just ran the wizard for Anyconnect SSL VPN, created a tunnel group, a vpn pool and added user to it. When trying to logon on the SSL service, it simply says "login failed". I suspect that the user might not be in correct groups or so?
some relevant config
webvpn
enable wan
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enable
group-policy vpnpolicy1 internal
group-policy vpnpolicy1 attributes
vpn-tunnel-protocol svc
tunnel-group admins type remote-access
tunnel-group admins general-attributes
address-pool sslpool2
default-group-policy vpnpolicy1
username myuser password 1234567890 encrypted privilege 15
username myuser attributes
vpn-group-policy vpnpolicy1
Debug:
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-867034168) and nh (-849922864)!
webvpn_add_auth_handle: auth_handle = 17
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
webvpn_session.c:http_webvpn_create_session[184]
WebVPN: error creating WebVPN session!
webvpn_remove_auth_handle: auth_handle = 17
webvpn_free_auth_struct: net_handle = CD5734D0
webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_free_auth_struct: net_handle = CD5734D0AnyConnect says:
"The secure gateway has rejected the agents VPN connect or reconnect request. A new connection requires re-authentication and must be started manually. Please contact your network administrator if this problem persists.
The following message was received from the secure gateway: Host or network is 0"
Other resources indicate that it's either the tunnel group, or the address pool.. The address pool is:
ip local pool sslpool2 172.16.20.0-172.16.20.254 mask 255.255.255.0
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# debug http 255
debug http enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-845538720) and nh (-828624376)!
webvpn_add_auth_handle: auth_handle = 22
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
HTTP: net_handle->standalone_client [0]
webvpn_session.c:http_webvpn_create_session[184]
webvpn_session.c:http_webvpn_find_session[159]
WebVPN session created!
webvpn_session.c:http_webvpn_find_session[159]
webvpn_remove_auth_handle: auth_handle = 22
webvpn_portal.c:ewaFormServe_webvpn_cookie[1805]
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
HTTP: Periodic admin session check (idle-timeout = 1200, session-timeout = 0)
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CC894AA8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
Close 1043041832
webvpn_free_auth_struct: net_handle = CC894AA8 -
Intermittant (not constant) SQL database ShareWebDb login failed events 3760 and 2424
My Sharepoint 3.0 services that were bundled with SBS 2008 appear to be working fine. Companyweb, etc, all work w/o issue, so I don't want to take violent action, but these errors seem to be accellerating so I would love to know if there is a known
solution.
I typically receive the following (these are in reverse time order, latest at the top, just as they appear in the event log):
Error Event ID: 3760 SQL Database 'ShareWebDb' on SQL Server instance 'np:\\.\pipe\MSSQL$Microsoft##SSEE\sql\query' not found. Additional error information from SQL Server is included below. Cannot open database "ShareWebDb" requested
by the login. The login failed. Login failed for user 'NT AUTHORITY\NETWORK SERVICE'.
one second earlier:Error Event ID: 2424 The update cannot be started because the content sources cannot be accessed. Fix the errors and try the update again. Context: Application 'Search', Catalog 'index file
on the search server Search'
Information Event ID: 18456 No description, here is the Details:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider
Name="MSSQL$MICROSOFT##SSEE" />
<EventID Qualifiers="49152">18456</EventID>
<Level>0</Level>
<Task>4</Task>
<Keywords>0x90000000000000</Keywords>
<TimeCreated
SystemTime="2010-11-12T18:35:06.000Z" />
<EventRecordID>491461</EventRecordID>
<Channel>Application</Channel>
<Computer>myserver.mydomain.local</Computer>
<Security
UserID="S-1-5-20" />
</System>
<EventData>
<Data>NT AUTHORITY\NETWORK SERVICE</Data>
<Data>[CLIENT: <named pipe>]</Data>
<Binary>184800000E000000170000005000450054003300310030005C004D004900430052004F0053004F00460054002300230053005300450045000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
Two seconds earlier
Information Event ID 17137 No description, here is the Details:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider
Name="MSSQL$MICROSOFT##SSEE" />
<EventID Qualifiers="16384">17137</EventID>
<Level>4</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2010-11-12T18:35:04.000Z" />
<EventRecordID>491460</EventRecordID>
<Channel>Application</Channel>
<Computer>mysever.mydomain.local</Computer>
<Security
UserID="S-1-5-20" />
</System>
<EventData>
<Data>ShareWebDb</Data>
<Binary>F14200000A000000170000005000450054003300310030005C004D004900430052004F0053004F00460054002300230053005300450045000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I get more 3760 errors than 2424's. However, the
2424's do seem to usually correspond to a 3760 18456 17137 occurance and the
3760 are always preceeded by 18456 17137. I was getting one or two sets a day, lately that has increased to 5 or 10.
I've done a lot of
web research on Sharepoint Errors 3760 and
2424 and I see a number of people are experiencing the the same issue. Most of what I've come across for solutions do not apply, since errors are intermittent, not chronic and my public remote URL has already been added
to BackConnectionHostNames as per:
http://blogs.technet.com/b/sbs/archive/2009/08/05/sharepoint-services-3-search-event-errors-after-an-sbs-2008-update-rollup.aspx
I installed the SQL Server Management Studio Express so I could try to track down the permissions on this database. I see the SQL server instance, MYSERVER\Microsoft##ssee, and it shows as running, but when I try to connect to it I get the following
error: "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote
connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)" I'm assuming that is because I don't have access permission for that internal database.
I don't see any errors in the event log related to failed logins or any errors at all from the SQL server, but there are the time matching informational entries right before the error events and lots of other 17137's and 2803's from MSSQL$Microsoft##sseeThank you Kevin, that does seem to match my symptoms and I have made the change suggested. Just incase that page becomes unreachable by others, here is the part of the page that applies to this:
Issue:
=========
Receive event error 3760 and 6398 on SBS 2008
Cause:
==========
Issue was caused by incorrect Auto Close option for ShareWebDb database
Solution:
==========
1. On the SBS 2008 server, click Start -> All Programs -> Microsoft SQL Server 2005, right click SQL Server Management Studio Express and choose run as administrator.
NOTE: You must run it as administrator to perform steps below.
2. In the Server Name box, type \\.\pipe\MSSQL$Microsoft##SSEE\sql\query, click connect.
3. Expand Database node and right click the ShareWebDb then choose properties.
4. Click Options in the left pane, in the right pane, please check whether the Auto Close option is set to True, if so, please change it to False. -
Hi
I am trying to connect to SQl server 2005 database ..Getting with login failed for user...
JDBC connection paramteres in lieu with the SQL version
com.microsoft.sqlserver.jdbc.SQLServerDriver
jdbc:sqlserver://<ip>:1433;DatabaseName=XXXX
1.I can see my driver 'sqljdbc.jar' in the com.sap.aii.af.jmsproviderlib in /ext folder .
2.I can access the database contents using studio express with the same credentials ..
3. Telnet is successful eliminating firewall/network issues .
4.SQl and windows authentication set in database
5.Document name and namespace given in sender JDBC
6 tried to establish connection picking up top 1* record from the view
Any more options to check for resolving this error ..
Please advise
AnushaHi Anusha
It looks like the drivers have not been installed. Ask your basis team to check and deploy the correct driver.
Also, according to this wiki, it seems that the connection string is not correct.
http://wiki.sdn.sap.com/wiki/display/VC/JDBCConnectionSetup
It should be jdbc:sqlserver://<host_name>:<port>;database=<db_name> (database instead of DatabaseName)
Regards,
Giuseppe -
Remote Speaker (AirTunes) Error - "the network connection failed"
I am getting a strange error message when I try to stream music through an AirTunes remote speaker. iTunes tells me this:
*An error occurred while connecting to the remote speaker "NN". The network connection failed.*
I can't say what has changed for this error to occur. Last time I used the system it worked fine, now it doesn't. I do know I have upgraded iTunes a couple of times since, though.
I am connecting to an 802.11g AirPort Express running firmware version 6.3.
Both our computers (MacBook & MacBook Pro) run Mac OS version 10.5.8.
In my system, the AirPort Express functions solely as a wireless speaker client, as the WLAN network itself is based around an 802.11n AirPort Extreme.
The AP shows a green light, and reports no problems in AP Utility.
When I change the device's "iTunes Speaker Password" setting in AP Utility, iTunes in both our computers immediately reflect the change, so apparently the various parts in the system do speak to one another just fine. They just can't transmit music, for some reason...
Anyone have any idea what might be going on, here?I have a similar problem. I use AE(g) with a Powerbook G4 and always get this error, which kind of bugs me, since all the settings appear to be correct. Unlike you though, I didn't make it work, not a single time — closing lid, opening and closing iTunes, resetting AE, yet no luck. Tried it all only with current versions of software.
However, the AE does sense when I unplug the speakers, since it first says "no speakers found", and then "the network connection failed". Strange is that the error has no number, nor does Console provide any clues. Sometimes it is pretty annoying when OS X just says "error". What error, where, why... Feels like good ol' windows times.
Update: Whoa, looks like we're not alone here. http://discussions.apple.com/thread.jspa?threadID=2154052&start=0&tstart=0
http://www.ilounge.com/index.php/news/comments/itunes-9-causing-airtunes-connect ion-problems/
Message was edited by: tochka -
This one has me banging my head against the wall ... Login fails once every second as long as my laptop is logged in (docked or VPN'd) ... Login attempts stop once machine is shut down ... It's a state 11 error ... We have 60+ sql servers (single nodes,
virtuals, and clusters) and it's only happening on this one box that I have found so far ... What would be attempting a login using my laptop id? When I query ring buffers it says it's a call from NLShimImpersonate but I can't track it down ... We access servers
via a windows group with sysadm permissions ...No, your laptop is trying to log in. The account domain\laptopid$ is the machine account for your computer. This is a service that runs under Local System, Local Service, Network Service or a service SID.
I have no idea what you have running on your laptop, but I would place my bets on IIS. But open the Services dialog in Manage Computer and stop once service at a time, until the errors go away.
Erland Sommarskog, SQL Server MVP, [email protected] -
Dear ALL
After successfully shifting the CRM from 2011 to 2013 i found a problem in Reporting section none of the report is working after some finding i conclude that MSCRM_FetchDataSource is not able to connect successfully
Through my report manager i tried to test the connection of MSCRM_FetchDataSource but i got the following error
System.Data.SqlClient.SqlException: Cannot open database "MSCRM_CONFIG" requested by the login. The login failed. Login failed for
user 'NT AUTHORITY\SYSTEM'.
I already add the NT Authority \ System as a db_owner under my database user of MSCRM_CONFIG
But still no success any one have any idea why it's happaning
Regards
RBI found a solution I hope my post will help other
I gave the db_owner to 'NT AUTHORITY\SYSTEM' and 'NT AUTHORITY\NETWORK' and assigned with both CRM and Config database
It resolved my issue
RB -
Error Msg: SQL login failed for HOSTNAME? Upgrade task?
Hi everybody,
Since some weeks we see an error message in all servers our SharePoint 2010 SP1 Farm, regulary every hour:
SQL database login for 'SharePoint_Config' on instance 'sqlsrv' failed.
Additional error information from SQL Server is included below.
Login failed for user 'OURDOMAIN\SERVERNAME$'.
The interesting part is that the
server tries to connect to the SharePoint Config database, not a dedicated account, which is normally used for every SharePoint service.
What circumstances can lead to an access of a server?
Unfortunately I get no details of the service or application which is trying to access. The event log just states "SharePoint Foundation (Microsoft-SharePoint Products-SharePoint
Foundation)" , Task Category "Database". The user who raises the error is "SYSTEM".
In the ULS log I can find the Stack Trace below which indicates to an upgrade task. But why is the SYSTEM user trying an update? Normally we do an upgrade by running the Upgrade Wizard with an dedicated account. And only the SharePoint Administration
windows service runs as Local System.
And I never heard or read something like: Give Local System (so the server) access to the SharePoint Config database?!
Thanks for your ideas :-)
Benjamin
System.Data.SqlClient.SqlException: Login failed for user 'DOMAIN\SERVERNAME$'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SharePoint.Utilities.SqlSession.OpenConnection()
at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock)
at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, Boolean retryForDeadLock)
at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command)
at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.GetVersion(SPDatabase database, Guid id, Version defaultVersion, SqlSession session, SPDatabaseSequence sequence)
at Microsoft.SharePoint.Upgrade.SPDatabaseWssSequence.get_BuildVersion()
at Microsoft.SharePoint.Upgrade.SPSequence.get_CanUpgrade()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.CanUpgrade(Object o)
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.get_CanUpgrade()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveCanUpgrade(Object o)
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.NeedsUpgrade(Object o, Boolean bRecurse)
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.get_NeedsUpgrade()
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.ValidateBackwardsCompatibility()
at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Initialize(SqlConnectionStringBuilder connectionString, Boolean enableCaching, Boolean checkCompatibility, Boolean bindRequestGuid)
at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Initialize(SqlConnectionStringBuilder connectionString, Boolean enableCaching, Boolean checkCompatibility)
at Microsoft.SharePoint.Administration.SPConfigurationDatabase.get_Local()
at Microsoft.SharePoint.Administration.SPFarm.FindLocal(SPFarm& farm, Boolean& isJoined)
at Microsoft.SharePoint.Administration.SPWebService.get_ContentService()
at Microsoft.SharePoint.PowerShell.SPCmdletSnapIn.get_Cmdlets()
at System.Management.Automation.Runspaces.RunspaceConfigForSingleShell.MergeCustomPSSnapIn(PSSnapInInfo mshsnapinInfo, CustomPSSnapIn customPSSnapIn)
at System.Management.Automation.Runspaces.RunspaceConfigForSingleShell.LoadCustomPSSnapIn(PSSnapInInfo mshsnapinInfo)
at System.Management.Automation.Runspaces.RunspaceConfigForSingleShell.LoadPSSnapIn(PSSnapInInfo mshsnapinInfo)
at System.Management.Automation.Runspaces.RunspaceConfigForSingleShell.LoadPSSnapIn(PSSnapInInfo mshsnapinInfo, PSSnapInException& warning)
at System.Management.Automation.Runspaces.RunspaceConfigForSingleShell.DoAddPSSnapIn(String name, PSSnapInException& warning)
at Microsoft.PowerShell.Commands.AddPSSnapinCommand.AddPSSnapIns(Collection`1 snapInList)
at Microsoft.PowerShell.Commands.AddPSSnapinCommand.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
at System.Management.Automation.CommandProcessorBase.DoExecute()
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
at System.Management.Automation.PipelineNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.StatementListNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.ifStatementNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.StatementListNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.ParseTreeNode.Execute(Array input, Pipe outputPipe, ExecutionContext context)
at System.Management.Automation.ScriptCommandProcessor.ExecuteWithCatch(ParseTreeNode ptn, Array inputToProcess)
at System.Management.Automation.ScriptCommandProcessor.RunClause(ParseTreeNode clause, Object dollarUnderbar, Object inputToProcess)
at System.Management.Automation.CommandProcessorBase.DoComplete()
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
at System.Management.Automation.PipelineNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.StatementListNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.ParseTreeNode.Execute(Array input, Pipe outputPipe, ExecutionContext context)
at System.Management.Automation.ScriptCommandProcessor.ExecuteWithCatch(ParseTreeNode ptn, Array inputToProcess)
at System.Management.Automation.ScriptCommandProcessor.RunClause(ParseTreeNode clause, Object dollarUnderbar, Object inputToProcess)
at System.Management.Automation.CommandProcessorBase.DoComplete()
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
at System.Management.Automation.Runspaces.LocalPipeline.InvokeHelper()
at System.Management.Automation.Runspaces.LocalPipeline.InvokeThreadProc()
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()http://aanuwizard.com/2010/04/30/login-failed-for-user-domainservername/
It will need to add user ‘NT AUTHORITY\NETWORK SERVICE’
to your database to get rid of this problem.
An asp.net application is running under NT AUTHORITY\NETWORK SERVICE account.
http://stackoverflow.com/questions/2806438/login-failed-for-user-domain-machinename
NETWORK SERVICE and LocalSystem will authenticate themselves always as the correpsonding account locally (builtin\network service and builtin\system) but both will authenticate as the machine account remotely.
If you see a failure like Login failed for user 'DOMAIN\MACHINENAME$' it means that a process running as NETWORK SERVICE or as LocalSystem has accessed a remote resource, has authenticated itself as the machine account and was denied authorization.
Typical example would be an ASP application running in an app pool set to use NETWORK SERVICE credential and connecting to a remote SQL Server: the app pool will authenticate as the
machine running the app pool, and is this machine account that needs to be granted access.
When access is denied to a machine account, then access must be granted to the machine account. If the server refuses to login 'DOMAIN\MACHINE$', then you must grant login rights to 'DOMAIN\MACHINE$' not to NETWORK SERVICE. Granting access to NETWORK SERVICE
would allow a local process running as NETWORK SERVICE to connect, not a remote one, since the remote one will authenticate as, you guessed, DOMAIN\MACHINE$.
If you expect the asp application to connect to the remote SQL Server as a SQL login and you get exceptions about DOMAIN\MACHINE$ it means you use Integrated Security in the connection string. If this is unexpected, it means you screwed up the connection
strings you use.
If this helped you resolve your issue, please mark it Answered -
An error occurred while connecting to the remote speaker. The network connection failed.
I can't get my itunes to connect to the remote speakers via airport express anymore - I did not change any settings - but did update iTunes to 10.2.2 and now things are not working and I get his message - "An error occurred while connecting to the remote speaker “Living Room”. The network connection failed."
Does anybody have a fix for this problem?
thanksSame problem for me. Ever since I upgraded to 10.6.3 and iTunes 9.1, about once per week I'll get the error message when trying to get iTunes/Airtunes to connect to my older Airport Express (running firmware 6.3) "An error occurred while connecting to the remote speaker <insert speaker name here>. The network connection failed." (No error codes are given.)
Airport Utility sees the offending Airport Express just fine (and there's a green light on said AE).
Curiously, a newer AE-n, elsewhere in the house (running firmware 7.4.2) does NOT exhibit this problem.
Simply restarting the offending AE does NOT clear the problem. Restarting the main router - a Time Capsule DOES clear the problem. Alternatively, toggling off the Airtunes functionality on the offending AE, restarting it, then toggling Airtunes back on, and finally restarting it DOES clear the problem (as an alternate to restarting the router). No matter how the problem is cleared, it returns within a week. It's frustrating that the problem cannot be recreated immediately.
Probably not relevant, but the computer on which I'm running iTunes (a Mac Mini) is connected to my TC via ethernet, not wirelessly.
I've tried the suggestion of disabling ipv6. No effect.
I fear the only solution will be to scrap my older Airport Express and replace it with a newer n-model. But before I resign myself to the $100 fix, any more ideas? -
I recently upgraded to a new MacBook Pro running Mountain Lion, and got my Airport Express (802.11g) out of the closet and set up an AirPlay network for my speakers.
All worked well for the first while, but recently I've been having an inconsistent problem with this: "An error occurred while connecting to the AirPlay device “my network name”. The network connection failed."
Since it came up, more often than not, I can't connect.
I can play without issue from my iPhone, and from my iPad.
I looked around these forums, and found a couple threads dealing with this from 2011, with no clear resolution to them. No one with Mountain Lion seems to complain about it, though a few people mused about whether Mountain Lion might fix the problem.
I'm running iTunes 10.7(21), and don't recall doing any upgrades to it that might have brought this about, though I can't say for sure.
My Airport Express is updated to firmware version 6.3, which I believe is the last one issued for the 'g' Airport Express.
My wireless network runs off an Airport Extreme 802.11n (Second Generation) with verion 7.6.1 firmware.
My Mac has 10.8.2 on it right now.
Hopefully some of that info might help sort this out - any replies greatly appreciated!One quick update. A workaround that was mentioned in one post did seem to work - if music is started via the Remote app it seems to connect fine.
And I'm not sure if I dare upgrade to iTunes 11 given the firestorm of bad impressions I see, including some that relate to Airplay functions... -
Hey,
I'want to make connection from my laptop(xxx.xxx.xxx.xxx = A) to a fixed computer(SQL server xxx.xxx.xxx.xxx =B). My connection string = "Provider=SQLNCLI11; Data source:name-pc/SQLEXPRESS; Integrated circuit=SSPI;Intial Catalog=Database name for visual
studio C#.
Laptop -> PC1 : Eror
It works when i use localhost or 127.0.0.1 and i can read my database without any problems if i install SQL server on my laptop. Know i install it to PC1 and uninstall on my laptop. When i change the name-pc by an ip-adress i get this error: Login failed.
The login is from untrusted domain and cannot be used with windows authentification. I did some research on multiple forums where they say about Local security policy(secpol.exe) but i don't have this file.
PC2-> PC3: work fine but i want to work with my laptop and i don't understand why it isn't working with my Laptop.
Can someone help me?
Thx a lot and sry about my english(its a disaster)
ThibautHello,
Yes, for the Windows Authentication to work you should be using the same Windows account and password.
Are you willing to create SQL logins inside SQL Server and allow your users to connect to SQL Server using SQL Authentication
instead of Windows Authentication? That could be a solution on a workgroup network.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Maybe you are looking for
-
How to use visual attribute property for the tab canvas
Hi all, i wanted to use set_tab_page_property ,and a visual attribute property for that respective tab page . but is saying to many declarations to match up . how will i able to do that. can any one helip me out ... example.... i wanted to set the pa
-
Hi all, I just update to iTunes 11, but since than I'm only able to sync my iPad and iPhone with a cable, the wifi sync option is not working. Both of my iDevices won't find my MacBook Info: iPad Wifi 3rd Gen iPhone 5 MacBook Pro 15" (mid 2011) Hope
-
Is there a way to split a Muse file so that 2 or 3 developers can work on the project?
I would like to know if using both Muse and Business Catalyst we can split the work so that 2 or 3 developers can work on the project? I know that we can use folders for each developer however by doing so it creates an index.html in each of the fold
-
hello there... i have big problem with my icloud.. Cals notes mail ect... find my ipod touch and icloud back up... they're all turning off even if i did not... theyre all gone..noticing of an empty contacts n notes...so i do this regularly..TURNING O
-
Hello. Is there any way to find jct.dll, jcpcsc.dll (those are in the jcop plug-in os/ directory) analogues for 64-bit platform? As i know, jcop tools provides only dll's and so libraries for 32-bit platforms to communicate with the card? Are there a