Network Magic 5.5......pure0, no internetspeed test available in your area

Hello all,
I purchased a LINKSYS router wrt160NL, it works fine under wind.wireless.zero.config. On the installation cd is the NETWORK MAGIC program. I installed it on all my computers. No problems. Then I upgraded to the latest version 5.5.9195.0-ReS. Since than the INTERNET SPEED TEST does not work anymore on one of the computers (my laptop). Also the pictogramm for the router is wrong (older type).
When I try to start the speedtest I get the responce "this is not possible from your location, NM will let you know when it will be".
Can someone help me?
My cofiguration:
Cable modem->wrt160nl-> 4 computers (all wireless54g adapters). (on all computers NM 5.59195.0-ReS)
With kind regards,
Rob

rob.spoor wrote:
Hello all,
I purchased a LINKSYS router wrt160NL, it works fine under wind.wireless.zero.config. On the installation cd is the NETWORK MAGIC program. I installed it on all my computers. No problems. Then I upgraded to the latest version 5.5.9195.0-ReS. Since than the INTERNET SPEED TEST does not work anymore on one of the computers (my laptop). Also the pictogramm for the router is wrong (older type).
When I try to start the speedtest I get the responce "this is not possible from your location, NM will let you know when it will be".
Can someone help me?
My cofiguration:
Cable modem->wrt160nl-> 4 computers (all wireless54g adapters). (on all computers NM 5.59195.0-ReS)
With kind regards,
Rob
Hi Rob,
Uninstall Network Magic. Reboot.
Reinstall Network Magic and test.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Similar Messages

Problem with Network Magic/Connecting to my PS3

Hello!
I've really been enjoying my Cisco Wireless-G WRT-54G2 for the last two months, using it as a wireless hookup to my PS3. However, yesterday morning sometime something on my PC hiccupped or something . . . it's an older '04 Sony Vaio- whenever I try to install Windows XP MS Service Pack 2 (it has 1)- it goes into terminal slowdown . . . but it hasn't had any problems until this morning, when I lost the internet connection on both the land line connected to my PC and the wireless one connected to my PS3. I don't know really what happened, though the only new error that seems to have come up is that my Norton AntiVirus is thtrowing out an "Auto-Protect" error that can't seem to get resolved . . .
So, in order to troubleshoot, since my wireless modem wasn't covered by Cox Communications, I was forced to unhook it from the system and hook the ethernet line directly from the cable modem into my PC (instead of the wireless router). Eventually the problem was solved. Unfortunately, things did not return back to normal when I hooked up the wireless router again. The lights are flashing that the connection on BOTH my wireless connection and my hardline connection to my PC are going strong, but only my PC connection is working. My PS3 is programmed for the system but always gets a DNS when it tries to do anything.
When I use network magic, it inform me that "You are connected to a New Network" called "Local Area Connection - Router" and I cannot access the Map and Status Center features because of this.
What a wonderful way to be spending my turkey day!!
Any suggestions? Is the Norton AntiVirus screwing me up? I'd appreciate any assistance anyone could provide.
Eric Bowling
(Mod note: Removed non-public information. Thank you.)
Message Edited by Vince_02 on 11-25-2009 05:09 AM

It is fairly easy and you should be up before Turkey day
If you know your PS3 has the correct security key for Network Magic (WEP or preferrably WPA WPA2 ) then follow this.
Open Network Magic>Click on (Network) Tasks>Click on Add a Device>(I have network lock on always to prevent intruders) it should disable your network lock>Follow the prompts, make sure your PS3 is on and click on internet or something to make it grab an IP addy, and show it's MAC addy, as well>
When Network Magic's "add a Device Wizard" starts looking for your PS3's MAC address, and you see a MAC address appear below the "searching" line>
you should be fine(and be able to click Finish) then, as it will be included as a device with access to your Router>It should re-engage your Network Lock.
Kind regards,
Dagra
PS. I just started using Network Magic about 2 weeks ago, and got the 5.5 pro, for my home network. It took me about 30 minutes to get it all connected including my PS3, but then I'm an IT Tech.
Message Edited by Dagra on 11-25-2009 06:17 PM

Network Magic or Home Network Defender is Blocking Uploads

I removed my primary hard drive and installed a new, faster larger one. When I installed Network Magic I have been getting some significant problems:
1. Speed test shows 0 Kbps upload speed and the gauge shows nothing uploaded on the Network Magic Speed Test
2. I can NOT upload my videos to my external video publishing site - the Vimeo uploader is erroring out and crashing. When I try the browser tool, I am getting an error that says I can not upload the file.
I did not have this problem before I reinstalled Network Magic. My other computers do not have this problem.
I am using:
Network Magic Pro Version 5.5.9195.0-pure0
The OS on this computer is Vista Ultimate Service Pack 2
The internet connection is CABLE via Atlantic Broadband
The Router is a Linksys WRT610Nv2 Fireware 2.00.00 B05
The computer's virus software is NETSAFE Security Suite from Altantic Broadband - Firewall is NOT active. ( this is different than my other computer that is on the network, and it different than my prior installation configuration on my old hard drive - it used McAfee.

I removed my primary hard drive and installed a new, faster larger one. When I installed Network Magic I have been getting some significant problems:
1. Speed test shows 0 Kbps upload speed and the gauge shows nothing uploaded on the Network Magic Speed Test
2. I can NOT upload my videos to my external video publishing site - the Vimeo uploader is erroring out and crashing. When I try the browser tool, I am getting an error that says I can not upload the file.
I did not have this problem before I reinstalled Network Magic. My other computers do not have this problem.
I am using:
Network Magic Pro Version 5.5.9195.0-pure0
The OS on this computer is Vista Ultimate Service Pack 2
The internet connection is CABLE via Atlantic Broadband
The Router is a Linksys WRT610Nv2 Fireware 2.00.00 B05
The computer's virus software is NETSAFE Security Suite from Altantic Broadband - Firewall is NOT active. ( this is different than my other computer that is on the network, and it different than my prior installation configuration on my old hard drive - it used McAfee.

EasyLink Advisor and Network Magic together - Why?

I am running a Toshiba laptop with Windows XP(MCE) SP3, wireless on a home network with a WRT300N V1.1 router - conecting this laptop, Lexmark X4550 wireless printer, a PS3(80), 3 PSP's, a desktop HP running Windows SP2 with a USB g adapter. I have updated LELA to (Version 3.11 build 9139.94 Platform version: 11.2.9195.1); and Network Magic to (Version: 5.5.9195.0-Pure0 Platform version: 11.2.9195.1 Updated 8/19/2009). I am running a Clearwire wireless broadband modem to the internet and the back of the router. So far, everything seems to be running fine.
My question is why am I running two different systems from Linksys to manage my router? Do I need both of them, even though they seem to be a little different? Which one is the future standard for Linksys? Do I lose anything by deleting one of them, or do I gain anything by keeping both of them? They do not seem to interfere with each other - it is just confusing.
LELA seems to be the better one now that both have been upgraded to the newer sotware.
Please advise. Thanks...
Toshiba Satellite P105-S0684 laptop with Windows XP(MCE) SP3, Intel Pro/100 VE wired and Intel Pro/Wireless 3945ABG wireless. Network with a WRT300N V1.1 router (Firmware version V1.51.2) - conecting this laptop, Lexmark X4550 wireless printer, a PS3(80), 3 PSP's, a desktop HP running Windows XP(Pro) SP2 with a USB g adapter. I have updated LELA to (Version 3.11 build 9139.94 Platform version: 11.2.9195.1); and Network Magic to (Version: 5.5.9195.0-Pure0 Platform version: 11.2.9195.1 Updated 8/19/2009). I am running a Clearwire wireless broadband modem to the internet and the back of the router.

toomanydonuts wrote:
My understanding is that there should be no port scan attempts coming through the router. Normally all the router's ports are closed, so no port scan should be coming through the router.
That's my understanding as well, but, unfortunately, I am still getting ports being scanned from remote IPs. :-(
Possible sources for this would be:
1) another computer on your network is sending out the port scan
2) a wireless printer on your network is opening ports ( I have an HP wireless printer that does this).
3) someone is connecting wirelessly to your network, and scanning ports
1) I only have one computer.
2) Believe it or not I don't have a printer. :-)
3) The router is connected to my computer via ethernet cable, so (I assume) I have (hopefully) turned off the wireless part of the router.
To verify that the router's ports are closed, go to Gibson Research at grc.com , and click on the "Shields UP!" test. Scan your ports and see if any of them are open. The Shields UP! program WILL do a port scan, so you can also see if your computer's firewall complains during this test.
I have done the above and the ports that "Shields Up" scans are stealthed.
If you do find ports open, the most likely cause is a program, running on one of your computers, that is opening ports.
All the programs that I use I have used for a number of years. With the D-Link router that I used I did not have this "problem". Having said that I am not interested in going back to the D-Link router. Hopefully this problem that I am having with my Linksys router can be rectified. :-)
Report back with the results of the scan.
Message Edited by toomanydonuts on 01-23-2008 02:02 AM
Thank you very much for your help toomanydonuts!!!
Servalan

NETWORK MAGIC UNABLE TO SEE OTHER COMPUTERS WITH NM IN THE SAME NETWORK MAP

I have two computers, one desktop (iMac OS X/Win 7 x64 bootcamp) wired connected and one PC laptop wireless connected in the same network through Linksys WAG320N, both running Network Magic ver. 5.5.9195.0-Pure0 (11.2.9195.1 12/13/2011) with the exactly same firewall settings allowing Pure Networks Platform Service to runs in Private and Public networks. The problem is that the both machines don’t see each other with Network Magic installed and therefore valuable features as screen shots or network speed test are not available. I already uninstalled NM in both equipments and reinstalled it, but the issue persists.
Anyone facing this same issue or have a clue on how to fix it?
Thanks,
Vertigo

As Barney-15E has suggested, this looks very much like 2 routers, and some systems talking to router A and some systems talking to router B.
Bonjour protocols will NOT cross a router boundary, so systems on router A will only see other systems on router A, and systems on router B will only see systems on router B.
The recommented network setup is to make the router connected to the broadband connection be the ONLY router in the home and configure all other routers so they are in "Bridge" mode. That is to say, the other routers are configured so they just extend the primary router's subnet.
How a home router is put into bridge mode is different depending on the make and model of router.
In your case, I think the Belkin should be the primary router, and you should put the Time Capsule into "Bridge" mode. Applications -> Utilities -> Airport Utility -> Time Capsule -> Internet -> Connection Sharing: Off (Bridge Mode).
Once you put the Time Capsule in bridge mode, all your systems should be on the same Belkin subnet, and now Bonjour will see all the Macs in your home.

Network Magic Pro 5.5 incorrectly identifies my HTC Android phone as a Win7 PC

Your Network Magic Version installed: 5,5,9195,0-Pure0
The type of connection to the Internet, like DSL
The Brand of Modem and its Model Number the router is connected to. SpeedTouch546T2 (set up as a bridge)
The Brand, Model, Hardware Revision of your Router and include the Firmware Version: Linksys WRT610Nv2 Firmware 2.00.00 B05
The Method of connection your problem computer has to the Router: Wireless.
The Connection in use on the problem computer: HTC Desire onBoard WiFi device
Operating system and version and Service Pack Level, if any. Android 2.1
Software Firewall in use: Windows 7
Also if any Anti-Virus Program or Spyware Program is actively protecting your computer. MS Security Essentials
Include your location in the post or fill out your Profile for this forum and include the location. Norway
I have a variety of devices on my home network, such as 1 MAC, 5 Win 7 PCs, 4 Android mobile phones, 1 TV PVR, 1 BluRay Player, 1 TV, 2 Network Printers, 1 iPod Touch. All of them is appearing as the should except one of the mobile phones. It is being recognized as a Win 7 PC and I can not change the type to anything but a PC/Mac. I have tried changing the IP address and also completely resetting the network but to no avail. Network Magic also gives my Android phone (HTC Desire) the name of one of the connected Win 7 PC's. The IP address and MAC address recognized by Network Magic is the ones associated with the phone, not the PC. The PC is a laptop with both wired and wireless connection, but it doesn't help if I disable on or the other or both. I have also completely reinstalled Network Magic on the PC but the problem persists.
In addition to being annoying, the problem also prevents me from administrating a NetGear access point as it only accepts to be managed by the computer Network Magic is associating with my Androd phone. To work around that issue I hope I can do a factory reset on the access point and reconfigure it, but I'm not looking forward to it. I have bought Network magic Pro as my network management sw and would like to use it for that purpose.
Please anyone - HELP!

Dang! It's been a year since this was posted and nobody is able to HELP...
Anyway, I have the same problem here too... My Verizon Motorola Droid A855 is identifies as computer and Microsoft Windows 7 (workstation). I can't get the other options to categorize it as a cellphone. The thing is my Panasonic DMP-BD60 Blu-Ray DVD Player appears on the network map and I was able to put it under "Media Adapter," another pc appears as it should, a Hawking Wireless-G Range Extender as "Wireless Access Point," and a BoostMobile Motorola i1 Android cellphone appears as a "cellphone." So, how come my Motorola DROID A855 is detailed as under my pc name and operating system Windows & Professional? This is weird.
Anybody has an answer?
Fiat lux

Network Magic Confusion

Hi – My problem is that NWM is confused and thinks that I do not have a link to my router. Also, following changes to my network the map has not been updated. How do I get Network Magic to update it’s map?
Last night I tried to upgrade the FW on my BEFSR41 and ended up with a brick – not sure why, but I have been unable to revive it. I had this Dlink DI-624 which I was using simply as an access point, and I then moved over to be the Gateway. I was going to replace the BEFSR41 with another one, but instead got a WRT160 which I put in place of the DLink to act as the Access point. All network functionality seems fine, but Network Magic is confused. Besides not recognizing that the DLINK router has been moved, it also does not see the new Linksys WRT160. This is the same on all three computers running NWM.
Any suggestions would be appreciated. Below is the requested info re: my network.
TIA – Tom
1. Your Network Magic Version installed: example: 5.1.9055.0-Pure0
2. The type of connection to the Internet, - Cable
3. The Brand of Modem and its Model Number - ARRIS TM502G VOIP Modem
4. The Brand, Model, Hardware Revision of your Router and include the Firmware Version: D-Link DI-624 Rev C, FW 2.76
5. The Method of connection your problem computer has to the Router: Wired
6. The Connection in use on the problem computer: Ethernet Port is a PCI Adapter Card, Linksys WMP54G v4.1
7. Operating system and version and Service Pack Level - Windows XP Professional SP3
8. Software Firewall in use: McAfee Personal Firewall 10.3 Build 10.3.111
9. Also if any Anti-Virus Program or Spyware Program is actively protecting your computer. McAfee VirusScan 13.3.127
10. Include your location in the post or fill out your Profile for this forum and include the location. Northern Kentucky/Metro Cincinnati
11. Post the link to your Router Model – http://support.dlink.com/products/view.asp?productid=DI%2D624%5FrevC
12 – Normal Network Devices - 2 Desktop PCs running WinXP SP 3, 1 Vista SP1 Laptop, 1 NetGear NAS, Linksys Print Server, 1 WD MyBook World, Wii, iPod, PPC & various other transient wireless clients
Solved!
Go to Solution.

THX for the reply, Augie. Uninstalling Network Magic, then ckeaning out the remnants and finally reinstalling Network Magic on all three computers did in fact allow the program to recognize the topology changes. This, however, seems like a cumbersome solution to the discovery & mapping of topology changes.
Reagrds - Tom

How to delete screenshots in Network Magic 5.5?

I am running Network Magic version 5.5.9195.0 on my home network. One of its features is the ability to take desktop screenshots of connected computers. NM will store up to 100 screenshots before overwriting the oldest ones. Rather than accumulating screenshots which are not relevant anymore, I like to delete the ones I have no need for anymore. That way I also save HDD space.
The screenshots are stored in the following location:
C:\Documents and Settings\All Users\Application Data\Pure Networks\Platform\ScreenCaptures
However, deleting screenshots does NOT remove them from the Past Screenshots list in Network Magic. Hence my question: how do I not only delete screenshots from my computer, but also from the Past Screenshots list in Network Magic? I opened a ticket for this question with Pure Networks, but they closed it without a conclusive answer...

Flevokiwi wrote:
I am running Network Magic version 5.5.9195.0 on my home network. One of its features is the ability to take desktop screenshots of connected computers. NM will store up to 100 screenshots before overwriting the oldest ones. Rather than accumulating screenshots which are not relevant anymore, I like to delete the ones I have no need for anymore. That way I also save HDD space.
The screenshots are stored in the following location:
C:\Documents and Settings\All Users\Application Data\Pure Networks\Platform\ScreenCaptures
However, deleting screenshots does NOT remove them from the Past Screenshots list in Network Magic. Hence my question: how do I not only delete screenshots from my computer, but also from the Past Screenshots list in Network Magic? I opened a ticket for this question with Pure Networks, but they closed it without a conclusive answer...
Hi Flevokiwi,
Best solution for right now, is to uninstall Network Magic. Reboot. Use Explore to delete the remaining folders of Network Magic. Run Disk Cleanup. Reboot and reinstall Network Magic. Use your other copy of Network Magic to reactivate the reinstalled copy of Network Magic.
This was asked before and no one from Network Magic Beta Forums had any other answer.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

"Network Magic Notification: NMApp.exe - No Disk" error message

Since downloading a trial of Network Magic I get an error message when linking to websites from email.
How do I fix this.

Hi there, can you please post some addtional info so that the Cisco Network Magic Support Community here on the Linksys Forums can assist you? The info that is needed is as follows:
1. Your Network Magic Version installed: example: 5.1.8345.0
2. The type of connection to the Internet, like DSL, Cable, or Verizon FIOS Internet Connection.
3. The Brand of Modem and its Model Number the router is connected to.
4. The Brand, Model, Hardware Revision of your Router and include the Firmware Version: Linksys WRT54G v8.2 Firmware Version 8.2.05
5. The Method of connection your problem computer has to the Router: Wired or Wireless.
6. The Connection in use on the problem computer: Ethernet Port is a PCI Adapter Card, Linksys WMP54G v4.1
7. Operating system and version and Service Pack Level, if any. Ex. Windows XP Professional x64 Edition Service Pack 1
8. Software Firewall in use: McAfee Personal Firewall 9.0.136 Build
9. Also if any Anti-Virus Program or Spyware Program is actively protecting your computer. (Some Programs like Spybot does cause problems, not being able to go to specific sites.)
10. Include your location in the post or fill out your Profile for this forum and include the location. (Reason: Not all Routers from a given manufacturer are available everywhere.)
11. Post the link to your Router Model, if an off-brand Router or not found in the USA on the Manufacturer's USA's Website. (Why? Posters helping each other, aren't working for Linksys or Cisco, so make it easier on the posters helping on.)
12. And any other information you think is important if answering your own post, and the nature of the problem, itself.
13. By posting all this information, you can hopefully get help from someone that has the same equipment that you have and theirs is working. Not everyone has the same equipment.
(Thanks to thecreator for providing me this list of info needed for NM support)
Please note that I am note that I'm not an employee of Cisco, and I am volunteering my time on here to assist other NM users, thanks!
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

Printer sharing problem in Network Magic

I have a desktop computer running Windows XP connected to a HP Photosmart 1115 printer. I have a laptop running Windows 7. I installed Network Magic on both machines. The network map is showing the printer with a yellow directional arrow going both ways. When I right-click on the printer and choose "Complete printer setup" a pop-up screen appears "Connecting to hp photosmart 1115 series on (name of desktop)." Then another screen pops-up "No driver found". Then another screen pops-up "File needed: Printer driver INF for Hp photosmart 1115 series". Not sure where to look on desktop? I tried some inf printers drivers but I get "Windows cannot connect to printer". I also get error 0x00000214 which tells me to set-up the printer by creating a port with \\desktopname\\printername. This changed the look of the printer icon in the control panel but the printer did not work on either of the machines. The only way I can print from the laptop is to save my files into a shared folder and then go to the desktop and open the shared folder and print. Is there any other solution to this problem besides buying a new printer that is compatible with Windows 7? There are no drivers from HP available to work in Windows 7. I also am using Norton Security Suite with Comcast.

jamhome wrote:
I have a desktop computer running Windows XP connected to a HP Photosmart 1115 printer. I have a laptop running Windows 7. I installed Network Magic on both machines. The network map is showing the printer with a yellow directional arrow going both ways. When I right-click on the printer and choose "Complete printer setup" a pop-up screen appears "Connecting to hp photosmart 1115 series on (name of desktop)." Then another screen pops-up "No driver found". Then another screen pops-up "File needed: Printer driver INF for Hp photosmart 1115 series". Not sure where to look on desktop? I tried some inf printers drivers but I get "Windows cannot connect to printer". I also get error 0x00000214 which tells me to set-up the printer by creating a port with \\desktopname\\printername. This changed the look of the printer icon in the control panel but the printer did not work on either of the machines. The only way I can print from the laptop is to save my files into a shared folder and then go to the desktop and open the shared folder and print. Is there any other solution to this problem besides buying a new printer that is compatible with Windows 7? There are no drivers from HP available to work in Windows 7. I also am using Norton Security Suite with Comcast.
Hi jamhome,
You will not be able to use the Printer from your Windows 7 Laptop without compatible Windows 7 Drivers. I purchased a Lexmark X6570 which is Wireless and works in Windows 7 Utlimate 64-Bit Version Computer.
You need to purchase a Printer or All-in-One that plugs into the Router or is Wireless to each computer.
You also need to open up Windows 7's Network and Sharing Center which may or may not help.
If you need additional help include the information that the posts at the top of the Forum asks for.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Computer does not have the latest version of Network Magic????

Your Network Magic Version installed:           5.1.9055.0-Pure0
The type of connection to the Internet, like DSL, Cable, or Verizon FIOS Internet Connection.:     DSL
The Brand of Modem and its Model Number the router is connected to.:      Motorola Surfboard SB5100
The Brand, Model, Hardware Revision of your Router and include the Firmware Version: D-Link DIR 655 Rev. A4    Firmware 1.21
The Method of connection your problem computer has to the Router: Wired or Wireless: Wireless
Operating system and version and Service Pack Level, if any. Ex. Windows XP Professional x64 Edition Service Pack 1: Vista (Ultimate) SP2
Software Firewall in use: McAfee Personal Firewall 9.0.136 Build: McAfee Personal Firewall 10.3
Also if any Anti-Virus Program or Spyware Program is actively protecting your computer. (Some Programs like Spybot does cause problems, not being able to go to specific sites.)
          MCAfee SecurityCenter 9.3
My problem is this. I downloaded Network Magic from the link on the web page, after I made my purchase, on every computer. Things were working fine with the computer above, then one day I was changing the internet usage times and I received an error message:
THE COMPUTER NEEDS NETWORK MAGIC, NETWORK MAGIC VERSION 5.0 OR LATER MUST BE RUNNING ON THE SELECTED COMPUTER IN ORDER FOR YOU TO CONNECT TO IT.
Now prior to that day I was about to connect to it from my computer. I am also still receiving Network Magic reports on the above computer sent to my email everyday. If the software is not install like the error message says then how is it that I continue to receive the computer usage reports?

Chiangel wrote:
Your Network Magic Version installed:           5.1.9055.0-Pure0
The type of connection to the Internet, like DSL, Cable, or Verizon FIOS Internet Connection.:     DSL
The Brand of Modem and its Model Number the router is connected to.:      Motorola Surfboard SB5100
The Brand, Model, Hardware Revision of your Router and include the Firmware Version: D-Link DIR 655 Rev. A4    Firmware 1.21
The Method of connection your problem computer has to the Router: Wired or Wireless: Wireless
Operating system and version and Service Pack Level, if any. Ex. Windows XP Professional x64 Edition Service Pack 1: Vista (Ultimate) SP2
Software Firewall in use: McAfee Personal Firewall 9.0.136 Build: McAfee Personal Firewall 10.3
Also if any Anti-Virus Program or Spyware Program is actively protecting your computer. (Some Programs like Spybot does cause problems, not being able to go to specific sites.)
          MCAfee SecurityCenter 9.3
My problem is this. I downloaded Network Magic from the link on the web page, after I made my purchase, on every computer. Things were working fine with the computer above, then one day I was changing the internet usage times and I received an error message:
THE COMPUTER NEEDS NETWORK MAGIC, NETWORK MAGIC VERSION 5.0 OR LATER MUST BE RUNNING ON THE SELECTED COMPUTER IN ORDER FOR YOU TO CONNECT TO IT.
Now prior to that day I was about to connect to it from my computer. I am also still receiving Network Magic reports on the above computer sent to my email everyday. If the software is not install like the error message says then how is it that I continue to receive the computer usage reports?
Hi Chiangel,
If Network Magic is not now installed on the question computer, you need to unsbscribe from the E-mails themselves to stop them.
As for not seeing the computer from the other computer, you need to adjust Vista's Network and Sharing Center, to allow the computers to see each other.
What build of McAfee Firewall are you running?
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Network Magic v 5.5 I cannot access the online help from the links within NM

When I try to access the online help from any link button in NM V5.5 including the main help > Help center > Network magic help, the browser will open and resolve address , Status bar will state done but I have a blank page.
The URL in the address bar is
http://go.purenetworks.com/redir/webhelp/nm/_cover.htm?pn=nm&a=5.5.9195.0&as=0&ad=2&bt=shp&b=Pure&dc=Pure0.LinksysRouterSetup&dt=OLN&k=1611759616&ct=cisco&ag=d9429c0fe2fd40b9&g=d04c74e28eb95300%2Cb2610a4f03b2f988&lcid=1033&ulcid=2057&am=99&it=upgrade
I am running windows 7 Ultimate, have tried
Firefox 3.6 and
IE 8.0 -- I have put the Url into the trusted zone and the web page will again show up as done and status bar shows trusted zone
I have tried all this with my Firewall & AV (Kaspersky Internet Security 2010) both on and disabled
NB The "ask linskys link works" as does the "community forums"
The Main help > Help center >Getting Started also works.
( I am running the WRT610N Router set up by Network Magic)
Many Thanks

I've seen this too use http://support.networkmagic.com
Mikro the Owner of the Linksys BEFCMU10_V4-UG Modem & The BEFSR41v4 Router.

3rd party antivirus and antispyware not detected by Network Magic

I have Norton Internet Security and PC Tool Spyware doctor installed on my laptop. The operating system is Vista 7 home premium. 2 Network magic alerts indicate that my antivirus and antispyware programs are turned off. These alerts refer to the programs that come with the operating system. It does not detect my 3rd party software programs which are up and running with no problems reported. Is there a way fix these alerts.
Solved!
Go to Solution.

Henry4324 wrote:
I have Norton Internet Security and PC Tool Spyware doctor installed on my laptop. The operating system is Vista 7 home premium. 2 Network magic alerts indicate that my antivirus and antispyware programs are turned off. These alerts refer to the programs that come with the operating system. It does not detect my 3rd party software programs which are up and running with no problems reported. Is there a way fix these alerts.
Hi Henry4324,
I never heard of Vista 7 Home Premium.
Please publish a link to this operating system. Thanks. You may have a bootleg copy. In which Network Magic isn't going to work correctly.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

What is the latest version of Network Magic Pro?

I've been all over this site and still can't get the simple answer. The updater in Magic can't be trusted. You would think the latest version number would be easy to find.

Current version of NM is 5.1, you can download it from www.purenetworks.com/download/
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

Add new features to network magic

Add WOT or Site advisor software into Network magic setting to better track ip address risk's on the reports

cohaver wrote:
Add WOT or Site advisor software into Network magic setting to better track ip address risk's on the reports
Hi cohaver,
This software already exists in McAfee Total Protection 2010 Software. In fact, McAfee added Home Network to its protection. The problem is McAfee is consuming the CPU at points.
The point being, NMapp also consumes the CPU at points. One doesn't need blouted Software, but software that does its job fast, without consuming the memory or CPU cycles slowing down the computer.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Network Magic 5.5......pure0, no internetspeed test available in your area

Similar Messages

Maybe you are looking for