"Network Magic Notification: NMApp.exe - No Disk" error message

Since downloading a trial of Network Magic I get an error message when linking to websites from email.
How do I fix this.

Hi there, can you please post some addtional info so that the Cisco Network Magic Support Community here on the Linksys Forums can assist you? The info that is needed is as follows:
1. Your Network Magic Version installed: example: 5.1.8345.0
2. The type of connection to the Internet, like DSL, Cable, or Verizon FIOS Internet Connection.
3. The Brand of Modem and its Model Number the router is connected to.
4. The Brand, Model, Hardware Revision of your Router and include the Firmware Version: Linksys WRT54G v8.2 Firmware Version 8.2.05
5. The Method of connection your problem computer has to the Router: Wired or Wireless.
6. The Connection in use on the problem computer: Ethernet Port is a PCI Adapter Card, Linksys WMP54G v4.1
7. Operating system and version and Service Pack Level, if any. Ex. Windows XP Professional x64 Edition Service Pack 1
8. Software Firewall in use: McAfee Personal Firewall 9.0.136 Build
9. Also if any Anti-Virus Program or Spyware Program is actively protecting your computer. (Some Programs like Spybot does cause problems, not being able to go to specific sites.)
10. Include your location in the post or fill out your Profile for this forum and include the location. (Reason: Not all Routers from a given manufacturer are available everywhere.)
11. Post the link to your Router Model, if an off-brand Router or not found in the USA on the Manufacturer's USA's Website. (Why? Posters helping each other, aren't working for Linksys or Cisco, so make it easier on the posters helping on.)
12. And any other information you think is important if answering your own post, and the nature of the problem, itself.
13. By posting all this information, you can hopefully get help from someone that has the same equipment that you have and theirs is working. Not everyone has the same equipment.
(Thanks to thecreator for providing me this list of info needed for NM support)
Please note that I am note that I'm not an employee of Cisco, and I am volunteering my time on here to assist other NM users, thanks!
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

Similar Messages

How to stop receiving "AdobePremiereElements.exe - No Disk" error message at start-up

I upgraded from Premiere Elements 9 to 13 at Adobe. Install went without error, but each time I call up the program a window pops up entitled "AdobePremiereElements.exe - No Disk" with the following text within the window: "There is no disk in the device. Please insert a disk into drive \Drive\Harddisk1\DR1." I can eventually get this window to remove after repeated attempts, and the program seems to be running fine. Would appreciate knowing how to stop such nonsense and remove the annoyance. Thanks.

jimp
Thanks for the good news that the OldFilm.AEX file is gone and no more No Disc error message.
To update 13 to 13.1, you need to use an opened project's Help Menu/Updates.
Have you done that, and the message was that you were up to date already?
To check what version you have
Premiere Elements Editor. Help Menu/About Adobe Premiere Elements. The screen that then displays should show 13.1 if updated from 13 to 13.1.
That Help Menu/Updates location should let you take are of the Elements Organizer updating from 13 to 13.1.
Nonetheless, you can check on Elements Organizer Help Menu/Adobe Elements Organizer to assure that the screen that displays shows 13.1 instead of 13.
Any questions, please let me know.
Best wishes
ATR

ElementsOrganizerSyncAgent.exe - No Disk ERROR message

I keep getting this error and I'm not sure why...Photoshop Elements 8

Where do you see it ?
Screensot of message would help us to understand it better .
Some generic information aout Backup/Sync in PSE can be checked at http://bit.ly/qP2vBs

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go?

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE

http://support.apple.com/kb/TS3281

No Disk error Messages in PSE8

On and off I keep getting the following error message when I switch between Edit and Orgainzier in PSE8
and sometime other times. Photoshop ElementsOrgainzer.exe-No Disk There is no disk in the
drive. Please insert a disk into drive \Device\Harddisk4\DR4.
I have to hit Cancel 3-4 times to get rid of it.
What is this and how do I stop it? Tks. ALan

I have recently experienced this message repeatedly in PSE6 running on Vista. I believe after either saving a file from PSE6 to a floppy in drive A or opening a file in PSE6 from an SD memory card in drive J. Resolved by recreating both situations then ensuring that i used photoshop to open files from and save files to the resident C drive before removing the floppy disk from drive A and using the 'safely remove hardware' function in Vista to confirm that it was safe to remove the SD card.
Following this procedure I have experienced no more 'no disk error messages'

Disk error message in Organizer

When I open Organizer in Acrobat Pro 9, I get a No Disk error message:
"There is no disk in the drive. Please insert a disk into drive \Devise\Harddisk\DR1" with buttons to Cancel, Try Again, Continue.
If I cancel [and I have to cancel twice for each error message, the message changes to ...Harddisk2\DR2 through to Harddisk4\DR4.
I always get there in the end, but how can I stop the error messages appearing in the first place? It's incredibly irritating!
There are no preferences for Organizer, and nothing I can see in the Acrobat preferences that would help.

I'm surprised PS even runs on that computer although of course 5.0 LE is pretty old.
A 165 MB file may just be too much for it.
How can you "set your c drive to 4096MB"? Do you mean Paging file?
We need someone with a long memory to chime in, but you do need to clarify what you are doing.

"Photoshop Elements10.0.exe - Bad Image" Error message

My Photoshop Elements 10 will no longer start.
I have been running Windows on my PC since initial installation and have not changed my set-up in any way, but now receive a "Photoshop Elements10.0.exe - Bad Image" Error message when trying to start my program. The error further reads c:Program Files 9x86)\Adobe\Elements 10 Organizer\amtlib.dll is either not designed to run on Windows or it contains an error etc. I have deactivated, removed and then reinstalled Photoshop Elements using my original discs and serial number, but continue to get the same message.
Any suggestions?

Hello,
Try doing a clean uninstall of the BlackBerry Desktop Software. Then reinstall it in an admin account on the PC. http://bit.ly/aMZYJL
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

"Missing Disks" Error Message - Unable to open FCP

Every time I tried to open FCP, a "missing disks" error message shows up and prevents me from opening the application. It says, "To preserve the integrity of the date used by Final Cut Pro, it is necessary to ensure the existence of the following path(s):" and it says "Macintosh HD is offline." There are two options for the error message, "Check Again" or "Reset Scratch Disks." When I click "Check Again," nothing happens. When I click, "Reset Scratch Disks", it takes me to a "Scratch Disks" window, which shows, "9.8GB on Macintosh HD is offline." I click "OK", but it only takes me back the same "missing disks" error message. What should I do to solve this error and open FCP?
Thanks in advance.

Hi -
If you are mid-project, then first I would find your project file and make a duplicate by Control-clicking on it, and selecting Duplicate. You can rename that new file so it is easy to remember. Once that is done, you have a protection back up of your project file so that whatever happens, you can recover back to this point in your project by opening the duplicated file.
Selecting (or Re-Selecting) a Scratch Disk does not affect what has been done in a project's past, it will only affect what FCP will do once it is launched and where it will place media and renders as you go forward.
A bigger concern/interest to me is why the disk Macintosh HD is offline, since Macintosh HD is usually the name of the internal system disk on your computer.
Have you renamed your internal hard disk (either intentionally or unintentionally)?
Do you have external disks connected to your computer?
Have you installed any new software - like Snow Leopard, or Fusion?
If you have had the disk Macintosh HD selected as your scratch disk all throughout your project up to this point, it is likely that the disk Macintosh HD has your captured footage and renders. So . . . if it is off-line as a scratch disk, once you reset your scratch disk to an available drive and open your project, it is likely that the project will show that all your media, which it previously associated with the missing disk is offline as well.
If that is the case, you will need to reconnect your media and re-render your renders. This can be done by selecting your offline clips and Control clicking on one of them and selecting Reconnect Media . . .
*If you are not feeling confident about proceeding, I would recommend a trip to an Apple store to get someone to walk you through the process.*
Hope this helps.

AcroMissingCompWClass Acrobat.exe Bad Image error message

Hi, I have a Windows 7 PC and InDesign, IIustrator CS4. When I try to print I get AcroMissingCompWClass Acrobat.exe Bad Image error message. Has anyone come across this?

My Acrobat 9 Pro freezes constantly. Seeing a pdf inside mutiple browser is not possible. Most of the time Acrobat 9 Pro and Acrobat Reader X starts within 5 min! As soon as I do anything, the top bar that shows "File", "Edit" etc. dissapears and averything freezes! Security software with possible firewalls I've uninstalled. Un- and re-installing Acrobat doesn't change anything. I'm using MS Windows XP, running Adobe CS4. Making any pdf's is no problem. I just can't see them. I can open a pdf inside Illustrator but that goes page by page. Any help?

Illustrator.exe - No Disk Error

Hello,
I've been getting this error with a handful of documents that I migrated from an old computer. When opening one of the offending files the following error pops up.
Illustrator.exe - No Disk
There is no disk in the drive. Please insert a disk into drive \Device\Harddisk9\DR9.
[Cancel] [Try Again] [Continue]
Clicking on any of the buttons results in the error popping up again. After several clicks (10ish) the error will stop, until you click on the document, then the error will begin another cycle.
The only thing that I can figure is that one of the referenced files in the document is not where it used to be and illustrator doesn't know what to do, or at least is not dealing with it very gracefully.
Does anyone have experience with this or any ideas on how to resolve the issue?
Thanks for your help,
Paul

I suppose the only way to fix this is to create a virtual drive/partition that has the correct mapping. You can do that on the command line using the subst command on Windows by simply assigning the drive letter to an existing directory. On a mac one would simply use aliases. If you wanted to go deeper, you'd have to read up un junctions on Win and symbolic links on Mac...
Mylenium

CLMLSvc.exe - No Disk error

I have a new HP Pavilion p6210f (1 week old) and have an error that I cannot cancel or get rid of!
"CLMLSvc.exe - No Disk, There is no disk in the drive. Please insert a disk into driv\Device\Harddisk5\DR6"
How can I get rid of this now and how to prevent from re-occurring.
thanks!!

Try installing this.
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=4063&lc=en&dlc=en&cc=us&lang=en&product=4006017
» HP MediaSmart Music/Photo/Video Application Update
10-2009 3.0.2.3228 - 157.81M
If that doesn't work, since it's only a week old, I'd back up the data and do a system recovery.

I keep getting adobecollabsync.exe - No Disk error

It pops up whenever I open a pdf although it doesn't stop my work its an annoyance to me. I uninstalled adobe and installed it again but still get this error. What can I do to fix this problem? so it says at the top "AdobeCollabSync.exe - No Disk" and the error says there is no disk in the drive. Please insert a a disk into drive E:. (I don't have an E drive though)

You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Itunes.exe-No Disk error messsage

The following message shows up whenever I open itunes:
"itunes.exe - No disk
There is no disk in the drive. Please insert a disk into drive\Device\harddisk1\DR2"
Can anyone tell me what this means, and more importantly how do I make it stop?
As long as I click on the "continue" button anywhere from 3 to 16 times, itunes will eventually open. Surely, this is not normal and it has only just begun to happen (after almost 2 years of using itunes.
Any assistance will be greatly appreciated.
Thank you,
Tom

Hi I have the same problem I tried many times but nothing happen. Do you know wath do I have to do

'No Disk' error message on Photoshop startup

Recently I have been receieving the following error message when Photoshop CS6 x64 srtarts up on my Windows 7 machine. Ps resides on my SSD.
I don't always get the message but when I press X, Cancel, Try Again, or Continue the message repeats until finally Ps starts. I'm not sure what drive \Device\Harddisk3\Dr3 is supposed to mean. Does anyone have a clue what Ps is complaining about?

I realize this is a mighty old thread, but I've recently had the same issue with Illustrator CSS 2014, and this is the only thread I could google that dealt with it.
I scratched my head for a while on this, but I think I figured out the issue. At least I think I figured it out on my end. The error comes from the "recently opened" menu as far as I can tell. I had an old external hard-drive that I was browsing some old work on. I unplugged it when done and continued to go along with my newer work the next day. When I attempted to save my newer work in Illustrator, I got the "no disk" message several times, but powered through it with "try again" till it saved.
I'm thinking the error is just the system bumping the file that I had recently opened and now cannot locate slowly down and eventually off the "recently opened" menu. Not sure why Windows is smart enough to bypass this error sometimes and not others with most portable drives, but perhaps its an issue with how old this drive was, or perhaps because I did not properly eject the drive. Networked drives being connected and not connected may cause a similar issue. Not sure.

Windows - No Disk error message when connecting Ipod to computer

I recently connected my Ipod to the Computer as I have done for the last year and I am now getting an error message reading: "Windows - No Disk". It then asks me to insert a disk. I cannot cancel out, continue or retry which are the three choices. I eventually have to Ctrl + Alt + Del to close out Itunes. Can anyone help? Thank You.
Dell XPS Windows 2000

I have been ejecting it. This problem only began recently. I read through about 30 pages of this forum and found someone postoing about the same problem. They said it may be McAfee Viruscan in the background.I'll check that out.

"Network Magic Notification: NMApp.exe - No Disk" error message

Similar Messages

Maybe you are looking for