Network Map Does Not Update

I have a WRT160Nv2 that has been upgraded to the latest firmware.  My network map no longer shows any of the laptops with wireless connections, only the one with a wired connection.  The "missing" laptops all connect to the Internet and show up in "My Network Places".  Does anyone have a suggestion for what could be going wrong?

As all the computer(wired and wireless) are able to go online..It means that there is no problem with the router.You might need to configure or reinstall the software which you are using to view the Network Map.

Similar Messages

  • Maps does not update map pages

    As I move on a road, maps does not refresh the map.  The dot showing my position goes off screen.  If I shrink the map, the position marker shows itself, but I lose detail.  My Co-Pilot navigation ap behaves the same way.  Does anyone have any ideas that will fix my problem.  I am using iPhone 4 with OS 6.1. 

    Fixed, for me.
    Just changed the language order in preferences language & region.
    Seems like maps has bad behaivor with some languages.

  • Anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find my provider. I swapped SIMs with another iPhone 4 on ios 4 to confirm device problem.

    Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.

    Does the device get any signal? 
    Sounds like the device may have had a hardware failure.  If it is out of warranty, the only option is the Out of Warranty replacement.
    AppleCare is only an option if it is still under the original warranty.

  • The update map does not support "UPDATE"

    Hi,
    I've created a Logical Data Service, but get a warning
    The update map does not support "UPDATE" : One or more update operations do not have update capabilities
    While creating the Physical Services(Oracle 11g), the update methos was not creating; so I create those manually.
    The update does not work, even from the Physcial service( It says Operation Successful) but the data does not change
    Any help is appreciated
    Rgds,
    Is

    Please post your physical data service both before and after you added the update.

  • Blackberry maps does not show map just a location

    Blackberry maps does not show map just a location on att with 10.0.10.822 os and software 10.0.10.116
    http://forums.crackberry.com/blackberry-z10-f254/blackberry-maps-not-working-818297/
    Solved!
    Go to Solution.

    Nope, I don't know the seekrit release dates
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • On a Mac v10.6.6 Firefox v3.6.13 Right click on Google Map does not bring up the drop down box, with the first item being directions from here, the right click does work on Google map when using Safari

    On a Mac v10.6.6 Firefox v3.6.13 Right click on Google Map does not bring up the drop down box, with the first item being "directions from here", the right click does work on Google map when using Safari

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 9.0 r999
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
    http://java.com/en/download/faq/firefox_newplugin.xml
    See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

  • N810 MAP does not open any more

    I tried to download US map and got an error. After that Map does not open. Actually it opens and closes right a way with no error message. So I flashed new upgrade to device and the same behavior again???? After sw update the divice should be as it is from factory??
    Any good ideas how to recover?
    Thanks

    I had the same problem (map download did not complete, map app. won't start then).
    Using File Manager I deleted "map" folder on Internal memory card. Map app. then works, but of course *all* the downloaded maps are lost.

  • Type 2 SCD -- does not update the old value.

    I have following columns in the source table:
    SSN, credit_score
    In the target, I have following columns,
    SK_ID, SSN, credit_score, flag
    I am flagging the old credit_score as 'N' when updating the row and at the same time it is supposed to enter a new credit score with flag 'Y' in another row.
    Second, If a row is completely new, It should be inserted with the flag 'Y'.
    SK_ID is the surrogate key and SSN is the natural key, My trigger column is credit_score.
    The problem is that when I run this type 2 mapping, it does not update anything but inserts the new rows only.
    I have posted the screen shots at the following link.
    http://www.box.net/shared/ea9v48r0xa
    Thanks for your help in advance.

    First of all, thanks for the reply...
    You can also look at the screen shots I posted in previous post.
    Here is how I am updating the rows (update logic).
    If source_SSN=target_SSN and source_credit_score!=target_credit_score
    then flag = 'N' (this is the update from 'Y' to 'N' after which i will insert a new row containing new value of credit_score with flag 'Y')
    As an example, if my old rows in the target table were:
    sk_id SSN credit_score flag
    101 2212 654 Y
    102 3023 707 Y
    Now let's say my source table has these values.
    SSN credit_score
    2212 648
    2220 690
    Then my target table should be like this:
    sk_id SSN credit_score flag
    101 2212 654 N
    103 2212 648 Y
    102 3023 707 Y
    104 2220 690 Y
    Do you see what I mean...

  • User gets "This network connection does not exist" when she tries to log on to Terminal Server (2008 R2)

    User gets "This network connection does not exist" when she tryes to log on to Terminal Server (2008 R2)
    I got more than 100 users. Shes the only one getting is. We tried four computers (All Windows 7 Pro)
    Nothing useful in event viewer to mention.

    Hi,
    Thank you for posting in Windows Server Forum.
    Does that user able to login previously?
    From your comment, it seems that there is some permission issue with that user. As you have checked that user with different system also. Please check that user is added under “Remote Desktop User” local group and also allowed “Allow log on through
    Remote Desktop service” permission under group policy. Also please check that when user tries to login it uses “Domainname\Username” format.
    In addition for a try, also check by disabling firewall on one particular system.
    To add users and groups to the Remote Desktop Users group by using Local Users and Groups snap-in:
    1.  Click Start > Administrative Tools, Open Computer Management.
    2.  In the console tree, click the Local Users and Groups node.
    3.  In the details pane, double-click the Groups folder.
    4.  Double-click Remote Desktop Users, and then click
    Add.
    5.  In the Select Users dialog box, click Locations to specify the search location.
    6.  Click Object Types to specify the types of objects you want to search for.
    7.  Type the name you want to add in the Enter the object names to select (examples) box. 
    8.  Click Check Names.
    When the name is located, click OK.
    More information:
    Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
    http://support.microsoft.com/kb/2477176/en-us
    Hope it helps!
    Thanks,
    Dharmesh

  • My firefox beta 12 using Linux platform does not update to firefox RC1 via the "check for update" function. I know windows' beta version had this fixed, when would Linux get similar support ?

    Current platform : Linux
    Current firefox version : Firefox 4 beta 12
    Issue : does not update to RC 1 using the check for update feature.
    Background : previously downloaded beta 8 and then it automatically updated to beta 12 using update features but for RC1, it does not.
    I know users under Windows platform had same problem but was resolved and they can now update via check for update feature.
    Please implement for Linux users too.
    Thanks !!

    If you can't update then you can download and install the full Firefox 4 RC version.
    * http://www.mozilla.com/firefox/all-beta.html

  • Can't add music my iPhone from iTunes.  When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.  [Manually manage music and videos] is checked. And, this is the only Mac I have ever used to

    Can't add music my iPhone from iTunes.
    When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.
    [Manually manage music and videos] is checked. And, this is the only Mac I have ever used to add music to my phone.
    Also, just updated the phone's software today, and iTunes' software is already up to date.

    Hi Gregg,
    Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your Music app is behaving normally.
    Cheers,
    GB

  • HT2513 The date on my dock does not update automatically ? - Ps anybody.

    I use MACCBOOK PRO with OS X ver 10.6.8.
    I  Cal Version 4.0.4 (1395.7)
    Sometimes the current date does not update on my ical icon in the dock. After clicking on it the date becomes OK.
    I would appreciate if someone has a solution.

    I solved the problem by uninstalling Glims.

  • Device is connected to to a wifi network but does not have access to Blackberry services over wifi connection

    please help me, my blackberry curve has been working perfectly fine (everything network and wifi connection are working great) since i got it but all of the sudden when i connect to our wifi at home i noticed that the wifi logo on the upper screen is grayed out. i checked the manual and it says: device is connected to to a wifi network but does not have access to Blackberry services over wifi connection. i dont  know what to do, i tried the hard reset (removed batt for 1 min while phone is on and put it back in) i also tried to remove the wifi profile and added it back up but still nothing seems to work, my service provider has BB services available on my phone, i can received BBM, pushed email, use FB on my phone using my network but i cant use my wifi to browse.. what should i do? help me please!

    With a PC, the Windows Firewall and/or the anti-virus software will sometimes block an attempted Internet connection.
    Check both applications to see if you can find a "blocked" item and then take steps to "allow" the connection.
    If still no luck, temporarily disable the wireless security for a short period to see if the PC can connect that way. If it can.....then you know it is security related issue.
    See if the PC can connect using a setting like WPA-PSK-TKIP. The equivalent Apple setting would be WPA/WPA2 Personal.

  • Mobile.me Calendar does not update/sync on iPhone

    Since I did my upgrade to the new version of Mobile.me Calendar (as requested by Apple!), my iPhone no longer shows entries that I have typed into the Mobile.me Calender website. I no longer use iCal because Apple said it would not work with the new version of Calendar on Mobile.me, so I did the upgrade to stay in sync with calendars on my mobile.me site and iPhone, but the iPhone does not update. I deleted my calendar entries on my iPhone hoping that the Mobile.me would re-sync the data, but that didn't happen either. Here is my info:
    iPhone version 3.1.3(7E18)   Model MA712LL (first original iPhone)
    What else can I tell you to help me please?

    Please always post your System details when you have a question. The upgrade to the new MobileMe calendar produces different results, and different problems, with different versions of OSX.
    Snow Leopard: during the upgrade process your iCal calendars should be moved to MobileMe (this can take some time and you have to wait for it to happen). Once done, your iCal reads the calendars from MobileMe so any changes made in either place will be visible immediately. If this has not happened then this Apple Tech Note provides instructions:
    http://support.apple.com/kb/TS3397
    Leopard: when the upgrade is completed iCal on Leopard will not be able to see the MobileMe calendars until an additional process is carried out, detailed in this Apple Tech Note:
    http://support.apple.com/kb/HT4330
    Tiger: iCal on Tiger cannot read the MobileMe calendars, period. The only workaround is to upgrade to Leopard, or Snow Leopard if possible (Intel Mac required).

  • Manual sync to ITunes does not update music

    I have a generation 3 (I think--it looks like the model number is A1318) IPOD Touch running version 4.1 operating system.  I have ITunes version 12.0.1.26. 
    It does not automatically sync.  When I select manual sync, it appears to go through the process and indicates that it has completed the sync, but nothing has changed.  It does not update the IPOD with new songs from my library.
    Any help would be appreciated.  For example are thees operating systems compatible?  If they are what am I doing wrong.
    Thanks
    Ron

    Try backing up to iTunes and restore from backup
    iOS: Back up and restore your iOS device with iCloud or iTunes
    Note that ll the synced media like apps and music have to be on the computer since they are not included in the backup

Maybe you are looking for

  • Multiple Select List does not Refresh with Dynamic Action

    All, Scenario: Using APEX 4.2.2, I have a Select List page item (P4_SPONSOR) set to allow multiple values which has a dynamic LOV to populate the list.  What I would like to do is highlight the display values based on another page item's value (P4_DR

  • Reminder in Nokia E5

    Hi All, I sthere anything like Remider which is avaible in other nokia models simillar to "TODo" werein at the set time it will alert us of the task that we set. Do we have any simillar in Nokia E5

  • External hardrive makes mouse act weird!

    G4 Laptop running OSX 10.4.11 My mouse works fine, but as soon as i plug in my external harddrive (Firewire) the mouse won't work, or only the right button will work, or it will only draw "selection boxes" on the desktop. Anyone?

  • [SOLVED] automount external ntfs disk

    Hello, After Arch fires up I can see my external hard drive in Thunar, however it is not mounted. I have to click on the icon to actually mount it. How can I make this "click" automatic? Thank you. Last edited by totolotto (2012-12-15 10:14:52)

  • Move columns in table at runtime

    Hi, Can anyone tell me how to do the application which is having the following functionalities.. 1)moving the columns in the table at run time... 2)drag and drop option at runtime..(i.e if one table having items and 2nd table is empty if we drag and