Network Menu Not Showing when clicked on under Go

I have "lost" my Network under Go! I have my iMac and PC connected. I am using a NetGear router and ethernet connection. Both computers connect with the internet and share a printer and scanner also.
At one time, I had both computers able to "see" each other and I was able to grab files from my PC for use on my iMac. Then, something happened, I don't know what it was but suddenly I was unable to do that.
Firewall is turned off on PC security center and also in Norton on PC.
Through terminal windows, I can "ping" each computer on the other computer so there is communication now between the two computers.
PROBLEM:
Under Go when I click on Network - no window or menu appears - except occasionally the window flashes on the desktop for one to two seconds and vanishes before anything can be really seen.
Also under Go when click on "Computer" a window comes up with an icon for my harddrive and an icon for Network showing. However, when I click on the Network icon, nothing happens or shows.
Under System Preferences, when I click on Network nothing happens or shows.
How can I get Network showing the two computer and working correctly?
I hope this is understandable and I'm asking the right questions. Otherwise, please fill me in.
Thanks for your help.

no one replies, no is concerned - found the solution!

Similar Messages

PDF checkmark not showing when click in box

Hi,
I'm having trouble with PDF not showing check mark when clicking inside the box. Is there a way I can setup it manually.
Adobe Reader XI
Version 11.0.06
Windows 7 Professional 32Bit
Thanks,
Retsel07

It's most likely a problem with the way the author of the file set up the field. You should report it to them. You can't do much about it in Reader.

My music page will not show when clicked on?

Hi im having difficulty to get my ipod to load my music page when clicked on and dont know what to do to fix it? I was wondering if someone would be able to help me.

Try the following. Usually the first ones works:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

Wait cursor not showing when clicking on a JMenuItem

I use the wait cursor when I do lengthy operations. The cursor usually works, but I cannot get it to work when I click on a JMenuItem. I saw this while researching the forums:
"The TreeWillExpandListener is called by the event dispatch thread, the thread responsible for refreshing your GUI. This means that until your loading method completes, no refresh activity is performed."
Could this be what is causing my problem?
Thanks for any and all help!

No. The problem is if your menu item launches some long process, your GUI thread is not getting updated until your process is over and by then, it's too late. The fix is to use threads to launch this long process so that the GUI has time to update the mouse cursor and the user knows what's going on.

Network files not showing when saving a document in Word 2010

I have some users setup where their local profile on their laptop syncs with our server so they can take the laptop home, work on files, bring it back to work and have it sync with files and folders when they get back.
One user is able to open a document in her "My Documents" folder (which syncs with the network drive). She's able to edit the document however when she goes to save the document to the same folder, she doesn't see all of the files that are
supposed to be in there. If she just saves the file anyway and goes to her documents folder via Windows Explorer, she can see the file she saved as well as the other files.
I'm not sure why it's happening but it seems to only happen when she saves a file in Word.
The affected user is running Windows 7 64-Bit with Word 2010.
Any thoughts?

Hi,
What are the other files' types in that location?
Suppose the user is trying to save a .docx file in that folder, she should only be seeing the same type of files as the type she's saving.
You can have the user try to change the "Save as type" and check if she's able to see other files.
Regards,
Melon Chen
TechNet Community Support

Photoshop CS6 Plug-ins not appearing when clicked under extension drop-down menu

I noticed that for some reason, my default extensions that come with photoshop cs6 extended and also custom installed plug-ins won't appear when clicked on. Usually you see a check mark by the plug-in if it is working and is visible on the photoshop layout as a panel. I have tried uninstalling and reinstalling, which the Kuler extension worked, but only under the workspace that I opened it up for. So for example, I opened it up on Essential workspace, but it wouldn't appear when changed to painting workspace. When I close the panel from the workspace, it won't ever come back up again even when clicked on under the extension drop-down menu on any workspace. This is occuring not just on my desktop, but also on my laptop. Both are not Photoshop CC, but regular Photoshop CS6.
I don't really mess around with the extensions much, but once I found out about the painterswheel plugin, I really wanted to try it out, hence now noticing this extension issue with my plug-in..
All my plug-ins appear on the drop down menu for Windows > Extensions, so it shouldn't be a file placement problem. I have also tried the Adobe troubleshoot for plugins by uninstalling my plug-ins to see if third party plug-ins were the problem, but still my default plug-ins won't even work.

I'm a little confused with what you write. There is a difference between extensions and Plug-ins. Plug-ins are installed using the plug-ins installer and extensions are installed by "Adobe Extension Manager (version)" where version is the Photoshop version and the extension package must be created for that particular Photoshop version. A CS5 package will not work in CS6 etc. Installed extensions will be listed in Photoshop under menu Windows>Extensions>List of them. Plug-in may install in the Filters menu or a place like menu File>Automate>Names. Installed Extensions that you installed should also show in the "Adobe Extension Manager (version)" window. Adobe installed extensions like Kuler and Mini Bridge do not show in the "Adobe Extension Manager (version)" window.

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand.

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand. I also cannot attach any of these pics into an e-mail or into any other file. I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild. Any Help?! Any Suggestions on how to fix this?! I have spent almost 2 days now going through all of the published help.
I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.

The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database -- if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
LN

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?

command-option-esc keys and force quit Mail. Then relaunch.

Need to send my back up email a reset security questions email but the option does not show when I click on password and security

Need to send my back up email a reset security questions email but the option does not show when I click on password and security

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97456)

Help: Records not showing when cube is placed under the Multiporivider

Hi Experts,
I have a Cube called Bcube with char Plant,calm year/month, material and Key Figure, Pqty
When I generate a report on this Cube, everything looks fine and I see plants, year, etc in the report
There are 2 other cubes:
MCube also has char Plant,calyear/month, material and Key Figure: Pqty, Sqty, TQty, AQty
DCube also has same as BCube: with char Plant,calyear/month, material and Key Figure Pqty
When I place all three cubes under the multiprovider, the values from the BCube does not show up in reports
e.g. in a simple report such as
Row : Plant
Columns: Pqty, Sqty, TQty, AQty
In the Multiprovider, under the Indentification of Characteristics, I checked the boxes for all three cubes whenever the same charactertic in all cubes showed up for identification: e.g..
InfoProvider InfoObject
Bcube----
Plant
MCube-------Plant
DCube -
Plant
and same for. e.g. 0Calyear
and same for Key Figures, e.g. I checked all 3 boxes for PQty which exists in each of the cubes
1. Why is my data for BCube not showing when reporting against the multiprovider?
2. what does it mean by checking the 3 boxes for Plant? and checking the 3 boxes for 0Calyear.
Thanks

Hi,
regarding your questions:
1. When I run listcube against the multiprovider, I only went to the output list to select the fields I needed in the output; then entered the particular cube e.g. BCube in the infoprovider field. That was it (NO other selection) and I got the described results I explained earlier. If you have a specific test for me to try, please let me know.
2. Please find the settings in both characteristics and key figures for all cubes in the MULTIPROVIDER maintenance screen:
Characteristic Assighment:
0calyear -- 3 boxes checked for BCube, DCube & MCube
Plant -- 3 boxes checked for BCube, DCube & MCube
0Material-- 3 boxes checked for BCube, DCube & MCube
Key Figure selection
PQty-- 3 boxes checked for BCube, DCube & MCube
Sqty --checked for DCube, this key fig is ONLY in DCube
TQty--checked for DCube, this key fig is ONLY in DCube
AQty--checked for DCube, this key fig is ONLY in DCube
I hope this helps you to guide me.
Or, were you referring to mappings in the transformations?
Thanks

Why "stop download video" feature not show when playing video

why "stop download video" feature not show when playing video,, i hope you can give me Solution for this problem because when i using 3g internet, it downlaod the video Quickly ,,, so it consume the Balance

Do you have Flash installed? Check HD > Library > Internet Plug-Ins
If the Flash Player app is not in the Internet Plug-ins folder, download and install from here.
When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu 
Troubleshooting advice can depend on that information.

Firefox stops responding and some times dose not start when clicked on alot!

fire fox 9 stops responding for long periods and some times dose not load when clicked on. Also please note fire fox refuses to load the comments section on Yahoo.com under the news tab. The little wheel on the bottom of the page just spins and spins and never loads this area of the page.
I think i know why but wonder since i have had issues with fire fox in the past with the whole not responding and load issues.

Firefox which stops responding after some time is a BIG problem. You're not the only one. The problem seems to be with sites which require Java. The problems I seem to have spotted is this : You visit a web site which needs Java so Java asks Firefox for the amount of memory needed and this is lent to JAVA. However, when you leave that web site, Java is naughty in that it doesn't give back the memory borrowd. Firefox then has to consume a lot of memory to the point that the whole computer system grinds to a halt as you have run out of memory.
Search in the forums for high memory or RAM and you will see many threads. In fact, when you first install Firefox it will ask if you want to send anonymous data about the memory usage!!

My external hard drive does not show when I am trying to open a document in Office Org??

My external hard drive does not show when I am trying to open a document in Office Org?? When looking in the about IMAC system support it shows as being connected. Any ideas??

Does the drive show up under 'Devices' in Finder?

My edited photos will not display when clicked on, a large triangle with exclmation comes up

my edited photos will not display when clicked on, instead a large grey area comes up wiht a triangle /exclamation sign.

Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

Adding shared printers? Network printer not showing up in list

I have a network printer not showing up in the Bonjour Printer Wizard. There is not a place to add a printer to this list. Does my network printer need to be installed under the Windows side as well, or can I share it using Bonjour? I'm confused as to how the shared printer program works. Also, my Adobe "print to pdf" option shows up as a printer, but how do I change the file destination location? It doesn't give me an option to change the "saved to" location. I am using these printers through Parallels in AutoCad, and that should be the only reason I will need to share printers. But I am in AutoCad a good deal of time, so I need to know how to quickly print my drawings.

Welcome to the forums!
You don't say if you installed after downloading the Printer you deleted, but I suspect it's one not showing, and that you need to reinstall.

Network Menu Not Showing when clicked on under Go

Similar Messages

Maybe you are looking for