Network Message

I keep getting a message similar to the one below in my e-mail inbox. How can I get it to go away?
This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.

-please check this thread:
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDeviceSoftware&message.id=1...
Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved.

Similar Messages

Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it drops a message again and again, preventing me to do anything about the setting.

Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it dropps the message again and again, preventing me to do anything about the setting.

A Fix for "Your network preferences have been changed by another application" Error
In the Library/Preferences/SystemConfiguration/ folder delete the following:
com.apple.airport.preferences.plist
NetworkInterfaces.plist
preferences.plist
com.apple.nat.plist
You will have to re-configure all your network settings since deleting.
(10.4.10)
Use Software Update to update your OS to last version of Tiger. Install all the other updates that goes along w/it.

Network message format error on Site Studio Designer

Hi all,
I am facing a very wierd issue in Site Studio. I have enabled accounts on the content server. When i use the content server User interface, i can check in any content using the standard check in form with or without specifying the account for it. In the case of Site Studio Designer, when i try to create a new asset/ content( basically check in anything) , it checks in the content successfully when the account metadata field is left blank. If the account field is specified, it gives me an error sayin :
Failed to check in file from location "".
(Network message format error).
When i checked the content server logs, it says:
The request was not processed by the Service handler because of a protocol error.
The request headers parsed from the request are:
{HTTP_USER_AGENT=Site Studio Designer, REQUEST_METHOD=POST, IdcAuthChallengeType=http, SERVER_NAME=punitp97194d.ad.infosys.com, SERVER_SOFTWARE=Apache/2.2.2 (Win32), HTTP_CGIPATHROOT=/idc/idcplg, HTTP_HOST=punitp97194d.ad.infosys.com, GATEWAY_INTERFACE=CGI/1.1, REMOTE_ADDR=10.76.135.190, SERVER_PROTOCOL=HTTP/1.1, SERVER_PROTOCOL_TYPE=NONE, IDC_REQUEST_AGENT=webserver, REMOTE_HOST=10.76.135.190, HTTP_CONNECTION=Keep-Alive, SERVER_PORT=80, HTTP_COOKIE=viscnt=3; IntradocLoginState=1; IdcTimeZone=Asia/Calcutta; IdcLocale=English-US; IntradocAuth=Internet, CONTENT_TYPE=text/hda, CONTENT_LENGTH=617, IDC_REQUEST_CTIME=1250602911, HTTP_INTERNETUSER=eBiz_Designer, SCRIPT_NAME=/idc/idcplg, PATH_TRANSLATED=D:/oracle/ucm/server/weblayout/idcplg}
Network message format error. Unable to parse browser environment or content item. Unable to parse properties. Name-value pairs are missing an '='. Unable to parse properties. Name-value pairs are missing an '='. [ Details ]
An error has occurred. The stack trace below shows more information.
!$The request was not processed by the Service handler because of a protocol error.<br>The request headers parsed from the request are:<br>{HTTP_USER_AGENT=Site Studio Designer\, REQUEST_METHOD=POST\, IdcAuthChallengeType=http\, SERVER_NAME=punitp97194d.ad.infosys.com\, SERVER_SOFTWARE=Apache/2.2.2 (Win32)\, HTTP_CGIPATHROOT=/idc/idcplg\, HTTP_HOST=punitp97194d.ad.infosys.com\, GATEWAY_INTERFACE=CGI/1.1\, REMOTE_ADDR=10.76.135.190\, SERVER_PROTOCOL=HTTP/1.1\, SERVER_PROTOCOL_TYPE=NONE\, IDC_REQUEST_AGENT=webserver\, REMOTE_HOST=10.76.135.190\, HTTP_CONNECTION=Keep-Alive\, SERVER_PORT=80\, HTTP_COOKIE=viscnt=3; IntradocLoginState=1; IdcTimeZone=Asia/Calcutta; IdcLocale=English-US; IntradocAuth=Internet\, CONTENT_TYPE=text/hda\, CONTENT_LENGTH=617\, IDC_REQUEST_CTIME=1250602911\, HTTP_INTERNETUSER=eBiz_Designer\, SCRIPT_NAME=/idc/idcplg\, PATH_TRANSLATED=D:/oracle/ucm/server/weblayout/idcplg}<br>--------------<br>Network message format error.!csUnableToParseBrowserEnvironment!syUnableToParsePairs!syUnableToParsePairs
intradoc.data.DataException: !csUnableToParseBrowserEnvironment!syUnableToParsePairs
     at intradoc.server.IdcServerThread.run(IdcServerThread.java:187)
Caused by: java.io.IOException: !syUnableToParsePairs
     at intradoc.serialize.DataBinderSerializer.readProperties(DataBinderSerializer.java:625)
     at intradoc.serialize.DataBinderSerializer.parseProperties(DataBinderSerializer.java:601)
     at intradoc.serialize.DataBinderSerializer.parseReaderData(DataBinderSerializer.java:493)
     at intradoc.serialize.DataBinderSerializer.parsePost(DataBinderSerializer.java:1806)
     at intradoc.serialize.DataBinderSerializer.parseRequestBody(DataBinderSerializer.java:1065)
     at intradoc.data.DataSerializeUtils.parseRequestBody(DataSerializeUtils.java:112)
     at intradoc.server.ServiceManager.init(ServiceManager.java:128)
     at intradoc.server.IdcServerThread.run(IdcServerThread.java:167)
Please advice.
Thanks in advance,
Nithya

The config .cfg entries are:
<?cfg jcharset="UTF8"?>
#Content Server System Properties
IDC_Name=EBIZ
IdcProductName=idccs
SystemLocale=English-US
InstanceMenuLabel=EBIZ
InstanceDescription=STAGING SERVER
SocketHostAddressSecurityFilter=*.*.*.*
#Database Variables
IsJdbc=true
JdbcDriver=oracle.jdbc.OracleDriver
JdbcConnectionString=jdbc:oracle:thin:@localhost:1521:EBIZ
JdbcUser=EBIZ_admin
JdbcPassword=ZS5CtJYdpcn2mEVqKVQAZ7LKQqacsT+XLnX3PZ/EKqo=
JdbcPasswordEncoding=Intradoc
DatabasePreserveCase=true
#Internet Variables
HttpServerAddress=punitp52975d.ad.infosys.com
MailServer=192.168.170.26
SysAdminAddress=[email protected]
HttpRelativeWebRoot=/idc/
CgiFileName=idcplg
UseSSL=
WebProxyAdminServer=true
#General Option Variables
IsOverrideFormat=false
DownloadApplet=false
MultiUpload=false
IsAutoNumber=true
EnableDocumentHighlight=false
EnterpriseSearchAsDefault=false
IsJspServerEnabled=false
JspEnabledGroups=
#Additional Variables
UseAccounts=True
IdcAdminServerPort=4440
SearchIndexerEngineName=DATABASE.FULLTEXT
IntradocServerPort=4444
DatabaseType=oracle
WebServer=apache
and httpd.conf entries are:
LoadModule IdcApacheAuth C:/Oracle/ucm/server/shared/os/win32/lib/IdcApache22Auth.dll
IdcUserDB EBIZ "C:/Oracle/ucm/server/data/users/userdb.txt"
<Location /idc>
Order allow,deny
Allow from all
DirectoryIndex portal.htm
IdcSecurity EBIZ
</Location>
<Location "/">
IdcSecurity EBIZ
</Location>
EBIZ is our content server instance name.
Thanks and Regards,
Nithya

Network message format error. GET request must have a QUERY_STRING value

I have installed new Content Server 10gR on my laptop.
Web Server is : Apache 2.2.4
DB is : Oracle 10g (Standard Edition)
Platform : Windows
CS is up & running. I am able to login and browse through content store. But when I try to perform any type of Submit operation anywhere in CS Portal ( for example "Updating My Profile and clicking on Submit" ) I get following error:
"Network message format error. GET request must have a QUERY_STRING value (the CGI parameters on the URL) "
1. Does any one know why I am getting this ?
2. Is some configuration missing for Apache which connects Apache with CS ?
Below is the httpd.conf changes:
LoadModule IdcApacheAuth D:/oracle/ucm/idc/shared/os/win32/lib/IdcApache22Auth.dll
IdcUserDB idc "D:/oracle/ucm/idc/data/users/userdb.txt"
Alias /idc "D:/oracle/ucm/idc/weblayout"
<Location /idc>
Order allow,deny
Allow from all
DirectoryIndex portal.htm
IdcSecurity idc
</Location>
3. One things that I see that before hitting the Submit button the URL is:
http://delrpatha76669.sapient.com:8989/idc/idcplg/?IdcService=GET_DOC_PAGE&Action=GetTemplatePage&Page=HOME_PAGE&Auth=Internet
And after hitting Submit button on "My Profile" the URL becomes:
http://delrpatha76669.sapient.com:8989/idc/idcplg/
I guess part of URL gets truncated/missed etc and so we are getting this error ?
Any way to fix this ?
Edited by: user12188052 on Sep 21, 2010 10:10 AM

This issue is resolved.
Cause
- After installation when I started CS , I saw "D:\oracle\ucm\idc\weblayout\idcplg" folder missing error in logs. Reason why I created this "idcplg" folder inside "weblayout" folder was because I thought it was not created during installation. I created this folder & copied "idc_cgi_isapi.dll" this file into it.. This was the issue
Fix
- I deleted the folder "D:\oracle\ucm\idc\weblayout\idcplg" and everything started working fine now.

In office network messaging app suggestion

Situation: I would like to use my iPhone to send messages to other computers on my office network. It would be nice to be able to send docs as well. For example, I would like to have a template for an invoice that I could fill out on my iPhone and send to the cashier. Office computers are running Windows.
Any suggestions as far as cross platform programs and/or apps that could do this? Does AOL/AIM do network messaging, ie without having to access the internet?
Thanks for any ideas.
Message was edited by: Robart Defuego

In a networked world, why on earth would you want to use a "thick" app on the iPhone and another "thick" app on 1 (or more) Windows machine(s)?
Surely a web app is the way to go here, with an iPhone-friendly version of the interface? It doesn't have to be an "internet" app - in fact, in a small office, you could just run a copy of Apache on a desktop Windows machine and have everyone access that over the internal office network.
There are plenty of web-based IM-type products (open source or otherwise) that you could install to do what you want.

Node failed to join the cluster because it ould not send and receive failure detection network messages

One of my customers has a Windows Server 2008 R2 cluster for an Exchange 2010 Mailbox Database Availability Group. Lately, they've been having problems with one of their nodes (the one node that is on a different subnet in a different datacenter) where
their Exchange databases aren't replicating. While looking into this issue it seems that the problem is the Network Manager isn't started because the cluster service is failing. Since the issue seems to be with the cluster service, and not Exchange,
I'm asking here.
When the cluster service starts, it appears to start working, but within a few minutes the following is logged in the system event log.
FailoverClustering
1572
Critical
Cluster Virtual Adapter
Node 'nodename' failed to join the cluster because it could not send and receive failure detection network messages with other cluster nodes. ...
It seems that the problem is with the 169.254 address on the cluster virtual adapter. An entry in the cluster.log file says: Aborting connection because NetFT route to node nodename on virtual IP 169.254.1.44:~3343~ has failed to come up.
In my experience, you never have to mess with the cluster virtual adapter. I'm not sure what happened here, but I doubt it has been modified. I need the cluster to communicate with its other nodes on our routed 10. network. I've never experienced
this before and found little in my searches on the subject. Any idea how I can fix this?
Thanks,
Joe
Joseph M. Durnal MCM: Exchange 2010 MCITP: Enterprise Messaging Administrator, Exchange 2010 MCITP: Enterprise Messaging Administrator, MCITP: Enterprise Administrator

Hi,
I suspected an issue with communication on UDP port 3343. Please confirm the set rules for port 3343 on all the nodes in firewall and enabled all connections for all the profiles
in firewall on all the nodes are opened, or confirm the connectivity of all the node.
Use ipconfig /flushdns to update all the node DNS register, then confirm the DNS in your DNS server entry is correct.
The similar issue article:
Exchange 2010 DAG - NetworkManager has not yet been initialized
https://blogs.technet.com/b/dblanch/archive/2012/03/05/exchange-2010-dag-networkmanager-has-not-yet-been-initialized.aspx?Redirected=true
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Disable no network message

i live in an area with very little coverage. I keep getting np available network messages sometimes up to 50 overnight. i then have to go thru and dismiss each notification before I can use the iphone.
Is there a way to turn off this very aggravating feature?

There's no way to turn off the message, but you can turn off whatever apps are trying to access the net, and are causing these alerts. For Mail accounts, disable automatic fetching or push. Disable push notifications. Disable syncing of contacts and calendars with net based apps (i.e MobileMe, Google, MS Exchange).

Could not activate cellular data network message

I am on Vodafone UK and mostly have my phone on 2G mode. I get good EDGE coverage 5 bars but I am intermittently getting "Could not activate cellular data network" message. The settings are correct, as it sometimes works, 3G data is fine over the same APN. A Blackberry connected via EDGE seems to work fine.
Vodafone insist its not an issue with the Network, as I work for a contractor with them I also had the radio side of things checked and all seems ok. Now it could be a core network issue, SGSN or similar, or its bug in the iPhone firmware. I never had this issue prior to iOS4.
Anyone else, specifically having any problems with EDGE/GPRS? I would be interested to know.

I had this problem at 1st with t-mobile 3g
connect it to itunes and it will say carrier update click accept on itunes that sorted it for me

"Could not activate cellular data network" message after ISO 4.1 update

I updated my iPhone yesterday just like millions of other people, but since the update was completed, I haven't been able to use the data network. Wi-Fi works without any problems, but when I've been out of the house yesterday and today, I haven't been able to establish any connection to the data network and have received the "Could not activate cellular data network" message each time. Is anyone else having this issue too? So much for a flawless update.

Hi,
This happens to me everytime I do a f/w update but for me its for a simple reason and is easy to fix.
I am using a non iPhone Contract SIM in my iPhone and as such is does not like the default iPhone contract APNs for cellular data, hence the message. These reset when you do a f/w upgrade.
I have to go into Settings/General/Network/Cellular Data Network and set the APNs (for data and MMS) to ones given to me by my provider, in this case O2 UK for a non iPhone SIM/Contract - all is then well.
Perhaps you are in a similar situation ?? It shuold be easy to resolve by checking the APNs for your SIM against the ones in the iPhone itself. I found mine by Googling for iPhone O2 APNs. In fact in the end O2 published the setup on their website.
Hope this helps.
Radar.

I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

Try to perform SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Then try a safe boot:
http://support.apple.com/kb/HT1564
Ciao.

Ipad 2 "Could not activate cellular data network" message

Ipad 2 "Could not activate cellular data network" message after I updated to iOS5 despite the 3G network being displayed on the menu bar. How do I resolve this, folks?

There have been some threads with similar problems. One I recall was a user not being able to sign up for cellular service from Verizon after an update to ios 5. The problem seemed to be on verizon's end. If Verizon is your carrier call Verison to find out when they will have a fox for this problem.

How can i post a network message through jdk

many client pc (win98) connected with LAN, i am writing a JDK application, i want to send network message to other PC, what sort of classes i should use for this.
Please guide and give some idea

Actually i made a chatting software with having more
than 10 user. But they can only chat when they use
this chat software made in jdk. The user wants to
know about whether he has received any new message
when he is not running the application but he is
using his desktop.Windows (we are talking about Windows, aren't we?) does not normally have something running on the background that can show the user an arbitrary message coming from another computer. There's the NET SEND stuff, but most people have it disabled.
So, to make this possible, there is no other way than to install a program on the user's computers that runs in the background, waits for messages, and shows messages to the user when they arrive. You simply cannot do this without installing and running a program like that on the user's computers.
An alternative idea is to make your chat program send an e-mail to the user. That way, if a user has an e-mail program running, he/she will get notified of a new message through e-mail. The API in Java for sending e-mail is JavaMail.

TS4268 i keep getting message that cant be set up - check network connection. went to Apple store. they could not set it up and referred me to this article which also doesn't solve problem. Keeps getting network message, even in apple store. Help!!!!

I keep getting message to check network connection when i try to use face time or imessage. Went to apple store. They could not fix it and referred me to apple support which sent me an article to do the things the store had already tried. Store thinks it is a problem with the ID although the correctID and p/word are being used. Just get message that cant sign in and check connection and try again. Happens in every location. Can anyone help me with this since Apple can't?

Since you've tried the Apple Store, etc., even though you say your Apple ID and password are good, I suspect that's the likely issue.
I recommend double checking that with Apple. This link might help:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

Syslogd -u not writing network messages to log file

i'm trying to get remote logging of airport bs debug level log message to work.
the airport bs it's doing it's part according to tcpdump:
# tcpdump -i en1 port syslog
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on en1, link-type EN10MB (Ethernet), capture size 96 bytes
11:56:39.332886 IP 10.0.1.1.syslog > 10.0.1.198.syslog: SYSLOG local0.notice, length: 71
12:01:10.037655 IP 10.0.1.1.syslog > 10.0.1.198.syslog: SYSLOG local0.notice, length: 71
12:07:57.786033 IP 10.0.1.1.syslog > 10.0.1.198.syslog: SYSLOG local0.debug, length: 100
etc...
config looks appropriate in /etc/syslog.conf:
local0.* /var/log/appfirewall.log
and the log file exists.
the syslog launchctl file says:
<string>/usr/sbin/syslogd</string>
<string>-u</string>
<string>-c 7</string>
and ps confirms that the options are working:
/usr/sbin/syslogd -u -c 7
but the log messages i see arriving from the bs aren't being written to the log file and don't see a network socket for the udp receiver in the netstat -a output.
i suspect that syslogd configuration may have been moved out of /etc and the airport help topics haven't been updated to reflect the new methods.
any ideas or pointers?

i found the answer. there's a section at the end of /System/Library/LaunchDaemons/com.apple.syslogd.plist that needs uncommenting to enable the udp listener.

"Unable to join network" message but finds network

Hi,
During the first few days after I got the iPhone I was able to connect to the internet through WiFi. This has stopped, be it public places, the office or the home WLAN.
Other iPhones, after entering the network password, have good access through their WiFi.
While the iPhone sees the network and gives its correct name, the information for IP address, Subnet etc. are all blank.
I completely reinstalled the firmware, I even upgraded from 2.1 to 2.1 .... to no avail.
I took off the network password, rebooted the whole thing (Router + iPhone), but there is no change.
Is there anything else I can do? (And no, I did not drop the phone either.)
Cheers
Piedro
Message was edited by: Piedro55

Hi Piedro,
What type of wireless security is being used on the Wi-Fi network?
If you are using WEP, make sure you have a 5 or 13 character password as described here: http://support.apple.com/kb/HT1344
Try Resetting Network Settings on the iPhone, go to Settings> General> Reset> Reset Network Settings.
Also, this article: http://support.apple.com/kb/TS1398 provides general tips that will resolve most Wi-Fi issues.
-Jason

Wireless networks messages

Whenever I switch on my PowerBook G4 (still on 10.3.9) two messages appear about wireless networks - the first being 'None of your trusted wireless networks can be found. Would you like to join the open wireless network named "name"?'. I click No to that and then another one comes up a few seconds later - 'None of your trusted wireless networks can be found. Would you like to join the open network named "differentname"?'. As soon as I clear these I can connect to my home wireless, however it's get annoying and I don't know how to stop these appears, there appears to be nothing in preferences?

The area where your Trusted Network names are recorded is:
System Preferences > Network >Airport
You may want to set up a different "Location" for use at home.
If those old networks are really useless, you can delete the Trsusted Network name list by using this article:
AirPort: How to reset the trusted networks list

Network Message

Similar Messages

Maybe you are looking for