Network Monitor and WebServices

Hi all,
my project uses a WebService by means of classes generated by the introspection service in Flash Builder 4. The service is located in a external server, and functions correctly when debugging locally my project, but only if Network Monitor is disabled. In case Network Monitor is enabled, I get a fault event with faultString "HTTP request error". If I reload the swf, it appears a message about a bad formed html. The activity is the following call
http://localhost:37813/path-to-my-service?WSDL?hostport=myExternalServer:8080&https=N&id=x x
so I assume that Network Monitor uses a kind of proxy to monitor traffic. It seems to me that for a reason I don't know the soap service get confused with this address because it sees a html page instead of a xml document containg the wsdl.
Interestingly, the same project but using the classes generated by the introspection service in Flex Builder 3 works correctly with the Network Monitor enabled.
Do you have any ideas about what I am doing wrong?
Thank you very much!
-Ignacio

Hi Ram,
I am in Flex web application running on Mac Safari 3.2.3 (5525.28.3) using WebKit r44341 on OsX 10.5.7, but the problem also appears with Firefox (Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.5; es-ES; rv:1.9.0.7) Gecko/2009021906 Firefox/3.0.7), with the message "SOAP Response cannot be decoded.".
In both Firefox and Safari the response header from server has "Transfer-Encoding: chunked".
Thank you,
-Ignacio

Similar Messages

Network - network monitoring and tracking

hi all, i'm newbie on networking field in labview, before this, i had done a project about DAQ, and i found out labview is a quite interesting programming langauge than others, so i wish to explore more about labview's abilities.
All i want to ask is about can labview monitoring packages throught our pc?
another question is about do labview having the function of tracking the packages through our network adapter and find out the sender?
if the both answers are yes, where i'm going to start about this? or any places having some teaching sources for me?
Best regard,
Jaxx

LabVIEW itself does not have the functions for sniffing other apps' packets, but you can try something like calling WinPCAP.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here, here, here, here and here are a few you can start with and here are some tutorial videos. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
Try to take over the world!

Network monitoring for beginners

I guess the first question would be, what do you WANT to see from these monitors? Is there specific information you want to get from them?

Hello-
I am a novice who is responsible for a small network in a library. I need to learn more about network monitoring. I have installed the Spiceworks Network Monitor, and I have been a exploring a little bit with MRTG. My particular issue is that I do not know how to interpret the information from the monitors. I have been searching for resources to help me with this and network monitoring in general, but I haven't been able to find much. Can anyone recommend where I might be able to find some help.
Thanks,
Seth Stephens
Jefferson Township Public Library
Oak Ridge, N.J. 07438
This topic first appeared in the Spiceworks Community

Spiceworks Network Monitor Foibles

Hello team, I have
some questions and concerns about the network monitor. My up time has been
about 65% since installing the monitor to a standalone, sufficiently powered
system. After an extended period of monitoring it will cease loading and
auto-refreshing the page. Also, when I conduct server reboots, the monitor will
not refresh when the server comes back up (I verify the connectivity from the
standalone system itself as well as remote into the server/run a ping -t to
track its' status). Thirdly, I have not been able to add any SNMP devices: wifi
APs, switches, routers, temperature monitors, and my UPS all return failures
when using the correct credentials to connect. Any help would be greatly
appreciated.
This topic first appeared in the Spiceworks Community

Taken from http://community.spiceworks.com/help/Spiceworks_Network_Monitor:
Install the Network Monitor on its own Windows device. Having the Network Monitor and the Spiceworks Desktop Application on the same machine is highly discouraged.

My mac and iPhone 6 has been hacked! foresure! Antivirus sentinel pro from apple store detected apr or arp spoofing, thereafter Antivirus protection also got hacked, I turn network monitoring on they turn off like 3 times then they close Antivirus

my mac and iPhone 6 has been hacked! foresure! Antivirus sentinel pro from apple store detected apr or arp spoofing, thereafter Antivirus protection also got hacked, I turn network monitoring on they turn off everytime then they close Antivirus for good, also Google.com is being imitated and not showing a true certificate (apr spoofing)?.these guys r good! I erased and reinstall Yosemite changed all passwords even on the wifi...could be wifi sniffing? I got Kaspersky hoping to use virtual keyboard for passwords and Kaspersky is comprised too..the virtual keyboard doesn't work it freezes up not allowing me to enter password. So I Uninstall and reinstall Kaspersky, so now I have problem with reinstall that doesn't work, then way later that day it is reinstalled..not over yet..that virtual keyboard now pops up randomly wanting me to use password? seems like they can copy anything real fast for i have to enter info like 2 or 3 times, never had that problem before. I'm thinking about going old school with paper docs and checks..yes technology ***...too vulnerable. .on the news they said 97% of businesses are hacked! can someone help me to counter this attack? thx
Message was edited by: technologysux

You have not been hacked. Get rid of all that antivirus. It is just making your life harder.

Geektool and network monitoring

Hi
I've been using Geektool to display some stuff on my desktop. I have become stumped when it comes to one thing and that is network monitoring. I would like to monitor the network traffic in terms of kb and mb flowing in and out, and then summing it up.
This should be doable in either a perl script or a bash script. I will however confess that at the moment I have not gotten further than netstat -w 5 which isnt quite enough.
Would be grateful if someone could give me a helping hand in this matter.
Thanks

netstat -ib will give you the in/out byte count for each interface. It should be easy to parse the data you want with perl.

Need a perl script which monitors a network folder and sends email when new files/folders arrived...

I need a perl script (or something else better) which monitors a network folder and sends email when new files/folders arrived. I tried it in Automator but failed.
Thanks!

Yes. I tried it. But whenever I restart m Mac, the watch folder doesn't work until I reconnect to network or run the Automator... I need a simple system that automatically connects to the network and monitor the folder, even I restart the Mac.
Thanks!

What is the difference between spiceworks and the network monitor

ok thank you

is there a difference between the two or is network monitor a subset of the spiceworks desktop?
This topic first appeared in the Spiceworks Community

How to transfer from one mini to another without messing up either one. I have one monitor and two minis. I do have a firewire cable but don't want a complete transfer, just specific files.

I have done a complete fire wire transfer before but I don't want to do that. I only want to transfer certain files and leave the existing and new minis in tact otherwise. I am sure I can transfer just files. My question mostly is: I only have one monitor but will have two minis that are hooked up. Can this be done without seeing the other computer contents? I hope that makes sense. The existing mini is 10.5.8 and the new one is 10.6.

You can start one mac up in target disk mode, get file sharing set up and then disconnect the monitor. Monitor ports are very tolerant of connecting and disconnecting with the computer on.
Switch the monitor to the other computer. Start up, connect the firewire cable (after the computer has booted) and set up file sharing on that computer. You can see the other computer's contents without controlling the other computer's mouse and/or keyboard.
If the other computer's hard drive does not automatically show up, go to network settings and verify those settings as well. That should not be necessary but ethernet would give you a second option for file transfers.
Ji~m

Error message when trying login to Network Monitor "oops something went wrong"

I am trying to get network monitor to work on my network. However, when installed I enter my credentials and get the error something went wrong. I am assuming we are blocking some traffic on the firewall or possibly even through a content filter. What I don't know is what url needs to be white-listed or which ports need to be opened for the application to work.
Firewall is off on the pc. I can authenticate when on a standard "outside link" But cannot when the same pc is on the LAN at work. Any suggestions would be greatly appreciated!
This topic first appeared in the Spiceworks Community

Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Spiceworks Network Monitor not working after upgrading to version 1.2

It's the same with my upgrade. Look like we need some oil and vinegar for the pepper ;)

Hello,
I received the email informing the availability of the new release of Network Monitor. After upgrading, the web console locks at below step:
The above issue persists whatever restarting the services or rebooting the computer hosting this service.
I also noticed that the size of this release is 682KB which is obviously small compare to old version:
Anyone else experiences the same issue?
Thanks
This topic first appeared in the Spiceworks Community

XFCE network monitor applet

XFCE has this nice network monitor applet, in which you can set the colors of the incoming and outgoing bar. The only problem is that they don't seem to have any effect. Mine stay blue. I'm guessing the global color scheme is interfering somehow... Any solution for this problem?

This is awesome, thank you for contributing this.

Performance of Network Monitoring in SCOM 2012 SP1

Hi all!
I´ve problems with performance of the network monitoring feature in SCOM 2012 SP1.
According to the
guide the following should be adeqate:
•1000 network devices (approximately 12,500 monitored ports) managed by a resource pool that has three or more management servers
•500 network devices (approximately 6,250 monitored ports) managed by a resource pool that has two or more gateway servers
We have 800 network devices with a total of 24000 ports,
BUT only 1500 of them are monitored. This is basically what happens automatically after discovery, since only ports between monitored devices are monitored by default.
For this setup I first used only one management server dedicated to the Network Pool,
based on my assumption that if two servers could monitor 6250 ports, one server would be more than enough for 1500. I found this configuration working very poorly so I added another server. I now have two servers
dedicated for the Network Resource Pool. (They are NOT members of the “All management servers resource pool”)
Still, I get constant alerts regarding Health Services Private Bytes on these servers. They vary between 1-2Gbytes. Furthermore, if one of the servers goes offline, the network devices that was monitored by that server becomes grey for
several hours. Even if the server only is rebooted it takes forever to get everything online and green again.
I don´t really know what I should do now. I had a plan to replace our current network monitoring system (SNMPc) which easily handles this load on only one server. They are of course completely different beasts, but still. SCOM seems to
require a massive back-end to produce equivalent real life results.
Any suggestions or reflections from the field are highly appreciated!
Regards
Peter

Hi,
Try to overide the monitor Health Services Private Bytes by the following steps.
◾Go Authoring space – Management Pack Objects – Monitors
◾Go to change scope – select clear all – look for Health Service – tick it and press OK.
◾Expand Health Service – expand Entity Health – expand Performance – expand Health Service Performance
◾Select the Health Health Service Private Bytes Threshold.
◾Right click the mouse and choose to overide the monitor for a group
◾Select the group called Management Server Computer Group and press OK
◾Select the Agent Performance Monitor Type – Threshold and change the value 104857600 to ex. 2610612736.
◾Select to store the overide in a management pack you have created and press OK
Juke Chou
TechNet Community Support

Message Monitoring and Web services Sequences .. SOAMANAGER

When can I use Mesage Monitoring and Sequence Monitoring .
We are making a proof a concept and we are the following.
1. A program which executes a proxy and with this proxy we are consuming a web services.
2. The proxy and web services were implemented in the same Abap Machine .
3. We execute the test and everything works very well and we consume the webservice and the program displays the expected result.
Now want to know How can we use the Message Monitoring and the Sequence Monitoring . Is this posible ? Do we have to make any previous configuration?
We don´t have any XI installation and for that we wonder if we can monitorize the webservices sequences ?
Any idea about if we can realize such king of actions ..
Many Thanks

Hi
I assumes u have dual stack.
You can do the sequence monitoring with or without PI. But without PI you would achieve that thing on the local machine.
You have to do those things at Java End using SAP NWA.
Please see this link
http://help.sap.com/saphelp_nwce10/helpdata/en/46/b00c2a99930764e10000000a1553f6/content.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/46/9cb2b57ded371ae10000000a11466f/content.htm

Network monitoring on application level

Hi all, is there an app that allows to monitor and log the network traffic on an iphone 4s (6.0.1) on the application level? Cheers, Kay

There is an app called "Airport Utility" in the App Store that allows you to manage the network. you have to have an Apple router or Apple Airport to manage the network. I don't think it monitors it though. From what you're saying, you want to monitor traffic. Airport Utility can let you know how many devices are on your network and how fast the network speed is for each device.

Network Monitor and WebServices

Similar Messages

Maybe you are looking for