Network Name not going online during Install

I have 2 servers connected to a Fibre SAN both running Server 2012 in a Failover Cluster. I have been trying to install the first of a Failover SQL 2012 Cluster. Everything installs properly until it gets to the final phase of the install and the Network
Name will not go online. I have removed and reinstalled many times with no success.
If I leave the install alone it will eventually go online however when that happens and I try to install the second node it gets to the Services part of the install and does not have one of the accounts in it. It is set as read only and I cannot change it
so I cannot continue the install.
Here is the log file I get after the initial install, I see nothing in it to point to the problem. I have tried manually creating the server in AD, in DNS etc.
 Thanks!
Overall summary:
  Final result:                  Failed: see details below
  Exit code (Decimal):           -2068774911
  Start time:                    2013-01-15 11:13:04
  End time:                      2013-01-15 11:23:19
  Requested action:              InstallFailoverCluster
Setup completed with required actions for features.
Troubleshooting information for those features:
  Next step for SQLEngine:       Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
  Next step for DQ:              Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
  Next step for FullText:        Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
  Next step for Replication:     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Cluster properties:
  Machine name: ServerName
  Product              Instance             Instance ID                   
Feature                                  Language            
Edition              Version         Clustered
  SQL Server 2012                                                         
Management Tools - Basic                 1033                 Standard Edition    
11.1.3000.0     No       
  SQL Server 2012                                                         
Management Tools - Complete              1033                 Standard Edition     11.1.3000.0    
No       
  Machine name: STVM5
  Product              Instance             Instance ID                   
Feature                                  Language            
Edition              Version         Clustered
Machine Properties:
  Machine name:                  ServerName
  Machine processor count:       24
  OS version:                    Future Windows Version
  OS service pack:              
  OS region:                     United States
  OS language:                   English (United States)
  OS architecture:               x64
  Process architecture:          64 Bit
  OS clustered:                  Yes
Product features discovered:
  Product              Instance             Instance ID                   
Feature                                  Language            
Edition              Version         Clustered
  SQL Server 2012                                                         
Management Tools - Basic                 1033                 Standard Edition    
11.1.3000.0     No       
  SQL Server 2012                                                         
Management Tools - Complete              1033                 Standard Edition     11.1.3000.0    
No       
Package properties:
  Description:                   Microsoft SQL Server 2012 Service Pack 1
  ProductName:                   SQL Server 2012
  Type:                          RTM
  Version:                       11
  SPLevel:                       0
  Installation location:         L:\x64\setup\
  Installation edition:          Enterprise
Product Update Status:
  None discovered.
User Input Settings:
  ACTION:                        InstallFailoverCluster
  AGTDOMAINGROUP:                <empty>
  AGTSVCACCOUNT:                 Domain\SQLClusterAgent
  AGTSVCPASSWORD:                *****
  ASBACKUPDIR:                   Backup
  ASCOLLATION:                   Latin1_General_CI_AS
  ASCONFIGDIR:                   Config
  ASDATADIR:                     Data
  ASLOGDIR:                      Log
  ASPROVIDERMSOLAP:              1
  ASSERVERMODE:                  MULTIDIMENSIONAL
  ASSVCACCOUNT:                  <empty>
  ASSVCPASSWORD:                 <empty>
  ASSVCSTARTUPTYPE:              Automatic
  ASSYSADMINACCOUNTS:            <empty>
  ASTEMPDIR:                     Temp
  COMMFABRICENCRYPTION:          0
  COMMFABRICNETWORKLEVEL:        0
  COMMFABRICPORT:                0
  CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20130115_111217\ConfigurationFile.ini
  ENU:                           true
  ERRORREPORTING:                false
  FAILOVERCLUSTERDISKS:          Cluster Disk 1
  FAILOVERCLUSTERGROUP:          SQL Server (SQLCLUSTER)
  FAILOVERCLUSTERIPADDRESSES:    IPv4;x.x.x.x;Cluster Network 1;x.x.x.x
  FAILOVERCLUSTERNETWORKNAME:    ClusterName
  FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, DQ
  FILESTREAMLEVEL:               0
  FILESTREAMSHARENAME:           <empty>
  FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher$SQLCLUSTER
  FTSVCPASSWORD:                 <empty>
  HELP:                          false
  IACCEPTSQLSERVERLICENSETERMS:  true
  INDICATEPROGRESS:              false
  INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
  INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
  INSTALLSQLDATADIR:             O:\
  INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
  INSTANCEID:                    SQLCLUSTER
  INSTANCENAME:                  SQLCLUSTER
  ISSVCACCOUNT:                  NT AUTHORITY\Network Service
  ISSVCPASSWORD:                 <empty>
  ISSVCSTARTUPTYPE:              Automatic
  MATRIXCMBRICKCOMMPORT:         0
  MATRIXCMSERVERNAME:            <empty>
  MATRIXNAME:                    <empty>
  PID:                           *****
  QUIET:                         false
  QUIETSIMPLE:                   false
  RSINSTALLMODE:                 DefaultNativeMode
  RSSHPINSTALLMODE:              DefaultSharePointMode
  RSSVCACCOUNT:                  <empty>
  RSSVCPASSWORD:                 <empty>
  RSSVCSTARTUPTYPE:              Automatic
  SAPWD:                         *****
  SECURITYMODE:                  SQL
  SQLBACKUPDIR:                  O:\MSSQL\Backup
  SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
  SQLSVCACCOUNT:                 Domain\SQLClusterEngine
  SQLSVCPASSWORD:                *****
  SQLSYSADMINACCOUNTS:           Domain\user1, Domain\user2
  SQLTEMPDBDIR:                  O:\MSSQL\TempData
  SQLTEMPDBLOGDIR:               <empty>
  SQLUSERDBDIR:                  O:\MSSQL\Data
  SQLUSERDBLOGDIR:               <empty>
  SQMREPORTING:                  false
  UIMODE:                        Normal
  UpdateEnabled:                 true
  UpdateSource:                  MU
  X86:                           false
  Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20130115_111217\ConfigurationFile.ini
Detailed results:
  Feature:                       Database Engine Services
  Status:                        Failed: see logs for details
  Reason for failure:            An error occurred during the setup process of the feature.
  Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
  Component name:                SQL Server Database Engine Services Instance Features
  Component error code:          0x86D80058
  Error description:             The cluster resource 'SQL Server (SQLCLUSTER)' could not be brought online due to an error bringing the dependency resource 'SQL Network Name (ST-SQLCluster)'
online.  Refer to the Cluster Events in the Failover Cluster Manager for more information.
  Error help link:              
  Feature:                       Data Quality Services
  Status:                        Failed: see logs for details
  Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
  Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
  Component name:                SQL Server Database Engine Services Instance Features
  Component error code:          0x86D80058
  Error description:             The cluster resource 'SQL Server (SQLCLUSTER)' could not be brought online due to an error bringing the dependency resource 'SQL Network Name (ST-SQLCluster)'
online.  Refer to the Cluster Events in the Failover Cluster Manager for more information.
  Error help link:              
  Feature:                       Full-Text and Semantic Extractions for Search
  Status:                        Failed: see logs for details
  Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
  Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
  Component name:                SQL Server Database Engine Services Instance Features
  Component error code:          0x86D80058
  Error description:             The cluster resource 'SQL Server (SQLCLUSTER)' could not be brought online due to an error bringing the dependency resource 'SQL Network Name (ST-SQLCluster)'
online.  Refer to the Cluster Events in the Failover Cluster Manager for more information.
  Error help link:              
  Feature:                       SQL Server Replication
  Status:                        Failed: see logs for details
  Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
  Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
  Component name:                SQL Server Database Engine Services Instance Features
  Component error code:          0x86D80058
  Error description:             The cluster resource 'SQL Server (SQLCLUSTER)' could not be brought online due to an error bringing the dependency resource 'SQL Network Name (ST-SQLCluster)'
online.  Refer to the Cluster Events in the Failover Cluster Manager for more information.
  Error help link:              
  Feature:                       SQL Browser
  Status:                        Passed
  Feature:                       SQL Writer
  Status:                        Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20130115_111217\SystemConfigurationCheck_Report.htm

Here are the results:
Warnings
Cluster Configuration
 Validate Resource Status
   Validating cluster resource IP Address: 10.10.32.216.
    This resource does not have all the nodes of the cluster listed as Possible Owners. The clustered role that this resource is a member of will not be able to start on any node that is not listed as a Possible Owner.
   Validating cluster resource Name: ST-SQLCluster.
    This resource does not have all the nodes of the cluster listed as Possible Owners. The clustered role that this resource is a member of will not be able to start on any node that is not listed as a Possible Owner.
   Validating cluster resource SQL Server (SQLCLUSTER).
    This resource does not have all the nodes of the cluster listed as Possible Owners. The clustered role that this resource is a member of will not be able to start on any node that is not listed as a Possible Owner.
    This resource is configured to run in a separate monitor. By default, resources are configured to run in a shared monitor. This setting can be changed manually to keep it from affecting or being affected by other resources. It can also
be set automatically by the failover cluster. If a resource fails it will be restarted in a separate monitor to try to reduce the impact on other resources if it fails again. This value can be changed by opening the resource properties and selecting the 'Advanced
Policies' tab. There is a check-box 'run this resource in a separate Resource Monitor'.
Hyper-V Configuration
 Validate Matching Processor Manufacturers
  Node Processor Manufacturer Version
  Server1.Domain.com AuthenticAMD AMD64 Family 16 Model 9 Stepping 1
  Server2.Domain.com AuthenticAMD AMD64 Family 16 Model 4 Stepping 2
  The processor version is not consistent across all the nodes. This is important because Hyper-V may not be able to live migrate a virtual machine between processors of different versions.
Network
 Validate IP Configuration
  Verifying that there are no node adapters with the same MAC physical address.
   Found duplicate physical address D0-67-E5-F9-33-AA on node STVM4.SedonaTek.com adapter vEthernet (Inside Trunk) and node STVM4.SedonaTek.com adapter InsideTrunk - VLAN 100 - Management LAN.
System Configuration
 Validate Software Update Levels
  KB Article Title Support Security Bulletins
  2770917  Update for Windows Server 2012 (KB2770917)
  Software Updates missing on 'Server2.SedonaTek.com':
  All software updates present
  The servers do not all have the same software updates.
I don't believe any of the actual warnings, those not related to the SQL install, will cause a problem.

Similar Messages

  • Directory configuration could not be completed during instal

    Scenario:
    1) New install sles 11 + oes 11
    2) Have backup of domain and postoffice from a dead Groupwise 8 server
    3) Upgraded to Groupwise 2014 using copies of the Backup of domain and post office copied onto new server.
    4) Everything works - or seems to.
    BUT Admin Notifications show this message
    1001 (notification ID)
    GWAdmin
    Directory configuration could not be completed during install. It is required for MTA sync.
    Is this a problem?
    Thanks - Daryl

    browndj wrote on 09/29/2014 01:46 PM:
    > Now how do I delete this thread
    You don't. Others may run into the same problem and benefit from your solution when they stumble across this thread, so thanks for sharing :-)
    Uwe
    Novell Knowledge Associate
    Please don't send me support related e-mail unless I ask you to do so.

  • Network Name not showing up (scrolling) in Airport Menu during launch

    I know this is extremely trivial. I am having no problems connecting using AirPort Extreme Base Station and the AirPort Utility. However, sometimes when I connect via Airport I can see the network name scroll in the menu bar as the Signal Strength icon moves to the left. Yet, at other times, the network name is never shown in the menu bar. What causes this inconsistency??
    Thanks for any input.

    i assume your airport extreme base station (AEBS) is you main router and you want the airport express (AX) join the network provided by the AEBS.
    you could try this:
    unplug and re-plug the airport express (AX), then click on the airport icon in your menu bar. you should see something like "Apple network bj1234567" or similar (it may take a little while for it to show up). in order to set up the express, you will have to temporarily join its network ! you will get a message asking +do you really want to switch networks ?+ and you do want to do that.
    launch airport utility (AU). you should see the AX on the left. click on the icon of the AX once to highlight it and click continue. follow onscreen instructions and, when prompted, choose to +join an existing network+ and enter the required information for your network.
    any help ?

  • Help with new Airport Extreme (and network name) not recognizing Time Capsule and other Airports in the home

    I had a Time Capsule running in an AV Cabinet and it made too much noise as it backed up and ruined soft/quiet music passages (and created far too much warmth as well).  So, I visited the local Apple store and the guy I met worked through a few solutions with me.  I decided on an Airport Extreme for the audio cabinet, and would move the Time Capsule to another room where it would not create noise interference.
    So, I have the Airport up and running perfectly well.  I changed my wireless network name and password.
    I cannot get the Airport Express and Time Capsule to show up on my network.  They both just blink that brown/orange color on the front.  When I go to the Airport Utility, it does not pick up the Time Capsule or Airport Express.  I have tried unplugging and plugging back in and scanning for devices, but dont know what else to do.  Are they still looking for my old network?  Is there a way to reset them??
    Thanks for any help.

    I've tried the option key on both--the AEBS offers 14 options, including Automatic, while the TC offers 8 options, and no Automatic. The AEBS lists (among others) 802.11 a/n-b/g compatible, 802.11 a-b/g compatible, or 802.11 n (5 GHz)-b/g compatible. The TC offers 802.11.n (b/g compatible), 802.11n only (2.4 GHz), and 802.11n only (5 GHz), among others...
    I had already followed the instructions in the link you supplied, except that the wireless options don't quite match...
    I am currently trying 802.11n (5GHz)-b/g compatible on the AEBS and 802.11 (5GHz) on the TC, which gives me a rate of 270 on my n devices and 54 on my g devices, according to the Airport Utility.
    This might be the best I can do, without buying a new TC. Thanks for any advice you can give...
    C.

  • Node showing up with a weird network name, not sure how to fix

    Just discovered this while working with a friend on figuring out how to use Qmaster and create a cluster of nodes across our network. We are running the Controller from a G5 and have two other service nodes set up. One is a MacBook Pro and another is a G4, which is the machine in question. While submitting a batch and viewing in Batch Monitor, the G4 would show up as "daves-ipod". We could not figure out why it wasn't showing up as its network shared name which is "PowerMacG4". After searching around the G4, I discovered via Finder that this "daves-ipod" business was coming from the Network/Servers/daves-ipod area in the Finder (see the photo below) I cannot figure out how or where to change this name, or even where it came from, since neither of our names are Dave. I'm sorry if this question belongs in the Finder area of Apple Discussions...

    Have you checked the network name in the sharing prefs?

  • Firefox is not going online while my other browsers are

    for the past 4 days, when i click on the firefox icon it automatically installs an update that i cannot stop. then the window opens and it does not go online, while my other browsers are.

    Do you have "Work Offline" checkmarked in the File menu? If so, click it to remove the checkmark.
    If not, please do the following.
    Click '''Help''', then '''Restart With Add-ons disabled'''.
    Next, click the button called "'''Continue without making changes'''". Firefox will subsequently restart in Safe Mode which means all your add-ons will be disabled.
    Then go to '''Help '''| '''About Firefox '''and click the '''Check For Updates''' button to download version 4.0.1

  • Network name not syncing with Printer b209

    I have a Macbook Pro (maverick system) and my printer network name isn't matching my access point network name how do I configure the two so I can start printing wirelessly??

    You have to input your SSID and password into the printer following the instructions in the manual.   Now try.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How to fix everything when power goes out during install? [SOLVED]

    last night I was installing kde and during the install process the power went out. I tried uninstalling kde, but pacman said dependencies were missing (I need dependencies to remove stuff?), so I tried reinstalling the kde group and that seems to have worked.
    What is the best way to recover from something like this and how can I be sure everything is now fixed?
    Last edited by RiceKills (2010-05-31 21:58:05)

    you can skip pacmans dependency checks with the argument -d.
    as far as i know, you can't fix files that were destroyed by a power outage.
    in my experience, it's rather rare that power loss destroys files (provided you use a stable file system).
    usually it's sufficient to do a thorough file system check with the repair option enabled (don't do this while the filesystems are mounted or at least mount them read-only). usually you can invoke such a file system check with shutdown -Fr now.

  • IMac display goes out during Install

    Hi All;
    I have an iMac G5. While installing Leopard, the screen goes dark, and is unresponsive to keystrokes to bring it back. The installation is still taking place, as I can hear the DVD being accessed, I ust cannot see the install screen. What is happening here?
    Carcass

    How long has this install taken? Interrupting an install can cause it to fail, and it can also corrupt your directories. If you feel that the install has failed, eject the DVD, reset your SMU and your PRAM, repair permissions and try again.

  • Contribute CS4 not showing up during install

    I'm trying to install Contribute CS4 on a PC running Windows 7.
    I've had it up and running using the same installer previously, so I know that it works (I also tried downloading the files again but the same issue returned).
    What's happening is, that the installer runs fine but only shows me the option of installing various smaller adobe programs - not Contribute.
    I've tried uninstalling and running the cleaner tool but the issue is still there.
    What can I do? I need the software for maintaining a website.
    Thanks in advance.

    if you follow all 7 steps you can directly download a trial here:  http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
    and activate with your serial number.
    if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com

  • Network error when going online?

    When I attempt to go online with my Samsung Intensity II, everytime it will load the main page but if I try to go anywhere beyond that, like to access email. It will say "network error"
    What is causing this? It's basically wasting data for me to try to log in and it uses MB to just do that. And if I get nowhere it was all for nothing.

        Mws_1984, let's get your mobile web working again! If you're unable to access the home page, there would be no data used. Are you able to send and receive picture messages? Dial *228 option 2 and then reboot your phone.
    Let me know if you still need assistance.
    MarquiaF_VZW
    Follow us on Twitter @VZWSupport

  • ICloud not going online in Mail

    For almost a month my iCloud account is offline in latest version of Mail. Even a change of OS doesnt seem to have helped. Every time I try to take online this is what I get..
    How can I resolve this issue?

    It had been working for me on a Leopard machine, but isn't now. I'm not certain when it stopped working, but the last time I know I was able to send via iCloud was August 7th as well. I did delete the setup and re-created it, but to no avail. It says the iCloud server is offline. I am still able to recieve mail via iCloud, just can't send.

  • Adobe story is not going online, error "not responding", will not go online to sync

    I am on a mac book pro, latest version, I am trying to go online, work online, in order to sync with the cloud so my writing partner can see the latest draft. never had an issue before and now it won't go online. I have signed out, closed the app, signed back in, tried different wi-fi's etc etc. nothing is working and I am needing to force quit the app because it is just not responding. I get the spinning beach ball.

    Thank you but, since I did that when I try to sign in it says "ERROR: Sorry, your Story free subscription does not allow access to this application. Please upgrade your subscription." Then my options below are cancel or upgrade now.  I don't want to upgrade. And I still don't know if my script is still there or not. A lot of times I've had to work on it offline. Even though I saved it, has it been deleted? Please tell me it hasn't been. I log on to my account on the adobe sight and all my work is gone. Same with the app version.
    What do I do now? I've never had this problem before and it's a little frustrating, off putting and scary. (Scary as in I've lost all my work.)

  • Software update not displaying status during install

    So I ran the software update on my Mac Mini, it downloaded 7 items. One was the OS itself, which failed, but said it would retry.  The download had a status bar the whole time and did get to the end. Now I think the other updates are being installed, but can't tell. There is no window telling me what it's doing. If I try to restart, it says that the update program stopped the restart.
    Am I supposed to be seeing progress?
    As I open the Software Update program, the menu at the top has mostly greyed out items.
    What do you suggest that this new Mini user does?

    Welcome to ASC
    No problem, this is a great place to think type out loud and besides others could benefit from your experience solution. 

  • Network does not recognize macbook name

    my home network is a combination of one macbook ,2 vista home premiums and one xp.
    The internet service comes from comcast ,which is a cable modem and then goes to airport extreme and then wirelessly covers the network at home.Going online and browsing the web is no problem for any of the computers,but i have some other problems.
    1-network advertises my macbook not by its name ,rather by some wierd MAC address ,00:23:6c:8A:90:57,and for this reason i can not connect to any of its shared files because is not known to the network and no pc is able to access it .from mac side i can access pc files(they show in finder).
    2-The documentation of remote login or screen sharing says if i want to connect to my mac from a pc then i need to type "mike-macbook.local." and it will connect or type vnc://ip address or the worst case just type macintosh.local and it will connect ,but none of the above scenarios work as far as screen sharing is concern.
    I know leopard is coming with its built in vnc server and if you have a vnc viewer installed on a pc (ihave real vnc on my pc's) then you can remote desktop and interact ,but still nothing.could you tell me what i am doing wrong and how can i fix this problem.thanks in advance.
    mike

    After connecting an HP C7063A printer directly to the Express via USB and trying to add the printer via "Printers & Scanners" under System Preferences, it does not show up as an available option.
    This would normally indicate that HP has not provided network drivers that would allow the printer to function from a network USB connection.
    Check with HP Support to see if they might have a printer driver that you could download and install that might work. I doubt that HP has provided drivers for Mavericks (10.9.x), and possibly Mountain Lion (10.8.x), for the printer, but you never know until you ask.
    Would it make a difference if the printer was connected to the Time Capsule instead of the Express?
    I would be surprised if it made any difference, but it could not hurt to try.
    If the printer has an Ethernet connection, you could connect to an Ethernet port on the AirPort Express.

Maybe you are looking for