Network name
How do I change the name of my network? The cable guy set it up as my last name. I'd like something a little more ambiguous.
Do you mean wireless network name?
Are you using an AirPort base station (ABS) or AirPort Extreme base station (AEBS)? If so, use the "AirPort Admin Utility" in the /Applications/Utilities directory.
If you are using a non-Apple base station, you will need to refer to the user guide for that base station and get the directions for using a web browser to access the base station's configuration page.
Similar Messages
-
How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
SigveHi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve -
I'm stuck here trying to figure this error out.
2003 domain, 2012 hyper v core 3 nodes. (I have two of these hyper V groups, hvclust2012 is the problem group, hvclust2008 is okay)
In Failover Cluster Manager I see these errors, "Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason: The handle is invalid."
I restarted the host node that was listed in having the error then another node starts showing the errors.
I tried to follow this site: http://blog.subvertallmedia.com/2012/12/06/repairing-a-failover-cluster-in-windows-server-2012-live-migration-fails-dns-cluster-name-errors/
Then this error shows up when doing the repair: there was an error repairing the active directory object for 'Cluster Name'
I looked at our domain controller and noticed I don't have access to local users and groups. I can access our other hvclust2008 (both clusters are same version 2012).
<image here>
I came upon this thread: http://social.technet.microsoft.com/Forums/en-US/85fc2ad5-b0c0-41f0-900e-df1db8625445/windows-2012-cluster-resource-name-fails-dns-registration-evt-1196?forum=winserverClustering
Now, I'm stuck on adding a managed service account (mas). I'm not sure if I'm way off track to fix this. Any advice? Thanks in advance!
<image here>Thanks Elton,
I restarted 3 hosts after applying the hotfix. Then I did the steps below and got stuck on step 5. That is when I get the error (image above). There
was an error repairing the active directory object for 'Cluster Name'. For more data, see 'Information Details'.
To reset the password on the affected name resource, perform the following steps:
From Failover Cluster Manager, locate the name resource.
Right-click on the resource, and click Properties.
On the Policies tab, select If resource fails, do not restart, and then click OK.
Right-click on the resource, click More Actions, and then click Simulate Failure.
When the name resource shows "Failed," right-click on the resource, click More Actions, and then click Repair.
After the name resource is online, right-click on the resource, and then click Properties.
On the Policies tab, select If resource fails, attempt restart on current node, and then click OK.
Thanks -
I had a Time Capsule running in an AV Cabinet and it made too much noise as it backed up and ruined soft/quiet music passages (and created far too much warmth as well). So, I visited the local Apple store and the guy I met worked through a few solutions with me. I decided on an Airport Extreme for the audio cabinet, and would move the Time Capsule to another room where it would not create noise interference.
So, I have the Airport up and running perfectly well. I changed my wireless network name and password.
I cannot get the Airport Express and Time Capsule to show up on my network. They both just blink that brown/orange color on the front. When I go to the Airport Utility, it does not pick up the Time Capsule or Airport Express. I have tried unplugging and plugging back in and scanning for devices, but dont know what else to do. Are they still looking for my old network? Is there a way to reset them??
Thanks for any help.I've tried the option key on both--the AEBS offers 14 options, including Automatic, while the TC offers 8 options, and no Automatic. The AEBS lists (among others) 802.11 a/n-b/g compatible, 802.11 a-b/g compatible, or 802.11 n (5 GHz)-b/g compatible. The TC offers 802.11.n (b/g compatible), 802.11n only (2.4 GHz), and 802.11n only (5 GHz), among others...
I had already followed the instructions in the link you supplied, except that the wireless options don't quite match...
I am currently trying 802.11n (5GHz)-b/g compatible on the AEBS and 802.11 (5GHz) on the TC, which gives me a rate of 270 on my n devices and 54 on my g devices, according to the Airport Utility.
This might be the best I can do, without buying a new TC. Thanks for any advice you can give...
C. -
Anyone can help with the below issue please? Much appreciated.
We have about 2k+ messages in sys.transmission_queue
Telnet to the ports 4022 is working fine.
Network connectivity has been ruled out.
The firewalls are OFF.
We also explicitly provided the permissions to the service account on Server A and Server B to the Service broker end points.
GRANT
CONNECT ON
ENDPOINT <broker> <domain\serviceaccount>
Currently for troubleshooting purposes, the DR node is also out of the Availability Group, which means that we right now have only one replica the server is now a traditional cluster.
Important thing to note is when a SQL Server service is restarted, all the messages in the sys.transmission queue is cleared immediately. After about 30-40 minutes, the errors are continued to be seen with the below
The
connection was
closed by the
remote end,
or an
error occurred while
receiving data:
'64(The specified network name is no longer available.)'We were able to narrow down the issue to an irrelevant IP coming into play during the data transfer. We tried ssbdiagnose runtime and found this error:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>SSBDIAGNOSE -E RUNTIME -ID 54F03D35-1A94-48D2-8144-5A9D24B24520 Connect to -S <SourceServer> -d <SourceDB> Connect To -S <DestinationServer> -d <DestinationDB>
Microsoft SQL Server 11.0.2100.60
Service Broker Diagnostic Utility
An internal exception occurred: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
P 29830 Could not find the connection to the SQL Server that
corresponds to the routing address tcp://XX.XXX.XXX.199:4022. Ensure the tool is connected to this server to allow investigation of runtime events
The IP that corresponds to routing address is no where configured within the SSB. We are yet unsure why this IP is being referred despite not being configured anywhere. We identified that this IP belongs to one of nodes other SQL Server cluster, which has
no direct relation to the source server. We failed over that irrelevant SQL Server cluster and made another node active and to our surprise, the data from sys.transmission_queue started flowing. Even today we are able to reproduce the issue, if we bring
back this node [XX.XXX.XXX.199] as active. Since, its a high business activity period, we are not investigating further until we get an approved downtime to find the root cause of it.
When we get a approved downtime, we will bring the node [XX.XXX.XXX.199] as active and we will be running Network Monitor, Process Monitor and the SSB Diagnose all in parallel to capture the process/program that is accessing the irrelevant IP.
Once, we are able to nail down the root cause, I will share more information. -
my iphone will no longer connect to my home wifi. it recognises it, but the searching cirlce is constant next to network name. there are three laptops and another iphone on the same wifi that have no connectivity issues. i have reset the network settings but that did not help. the issue started last week when the second iphone was introduced to the house, could this be the cause?
No.
Any problem connecting your iPhone to any other wi-fi network besides your own? -
My friends MacBook connected easily to my wireless, but why not the ipod touch? When prompted for "Password" I enter the security key info and nothing, nadda....zip. The MacBook asks for the "Security Key" info not "Password", like the touch. What's the difference?
Click on the blue arrow to the right of the network name, if IP address starts with "169." ,restart your router. It should connect properly after your router reboots in a minute or two.
-
64 The specified network name is no longer available
Hi Experts,
We have been using TMG 2010 from last 5 years as a reverse web proxy for OWA , outlook anywhere , active sync etc. Of late users from one particular site have been complaining of regular disconnections on outlook and OWA.
We don't have complaint from any other site except to this , whereas users in this site can browse other secure web sites without any challenge.
I have diagnosed the packets coming from their public IP and i could see that lot of connections happen successfully whereas few it shows either denied connection or failed connection attempt.
if i concentrate on failed connection attempt , i get the below information. Can some one provide any hint on the possible resolution for this issue.
Any help would be much appreciated
Failed Connection Attempt
3/19/2015 1:29:14 PM
<id id="L_LogPane_LogType">Log type:
</id><id id="L_LogPane_WebProxyForward">Web Proxy (Reverse)</id>
<id id="L_LogPane_Status">Status: </id>64 The specified network name is no longer available.
<id id="L_LogPane_Rule">Rule:
</id>Outlook anywhere success rule
<id id="L_LogPane_Source">Source:
</id>External (91.230.41.193:53933)
<id id="L_LogPane_Destination">Destination:
</id>Local Host
<id id="L_LogPane_FilterInfo">Filter information:
</id>Req ID: 19374dc2; Compression: client=No, server=No, compress rate=0% decompress rate=0% ; FBA cookie: exists=no, valid=no, updated=yes, logged off=no, client type=unknown, user activity=yes
<id id="L_LogPane_Protocol">Protocol:
</id>https
<id id="L_LogPane_User">User:
</id>anonymous
Md.Abubakar Noorani IT Systems Engineer Serco Ltd.Hi,
>>64 The specified network name is no longer available
This error is very general. You need to collect a network trace and analyze it. The most common one is when the backend server is performing a dirty TCP connection reset.
You could have a look at the blog below.
Error 64 “ The specified network name is no longer available” while accessing a
HTTPS site through ISA 2006
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
BMR-SS backup fails with error "the specified network name is no longer available"
We are running DPM 2012 SP1 on a Windows Server 2008 R2 system, backing up a Windows Server 2012 system that is a DC. The agent version is 4.1.3417.0. Both the DPM server and the DC are physical systems - brand new HP Proliant 360's.
When creating the replicas for the 2012 server the first time, the backups work fine, and then for a day or so after that. After a couple of days, the BMR-SS backups fail with the error "the specified network name is no longer available".
I can watch the backup happening in the Windows Server Backup console on the protected server - the BMR backup goes up to 99% and then fails. BMR backups on all the other servers are working - we have a mix of Win2008R2 and Win2012.
Here is what I have tried:
I can connect to the UNC path on the backup server without a problem during and after the backup is happening.
Tried reinstalling the DPM agent.
Tried backing up directly from the protected server to another server's network share, which worked.
I can copy multiple gigabyte files directly from the protected server to the DPM file share without a problem (the same one that DPM uses for the replica)
Tried turning off the SCEP real-time protection during the backup.
Any help would be appreciated - thanks.
KWllo Boudewijn
I followed Boudewijn's suggestion.
The Windows 2012R2 servers had no recovery partition in disk C. I created one (400MB) following http://support.microsoft.com/kb/2930294/en-us and
DPM system restore worked. But just once.
So this is not the solution to the problem......
Is no one else having issues with DPM bare metal protection of Windows 2012R2 servers? -
"the specified network name is no longer available"
I have a weird situation. I am using both iMac and Dell laptop. I use AEBS a1s a bridge - AT & T installed a wireless router and one hard line, and I plug my AEBS on the hard line. Dell is connected to AT&T router (and then to AEBS through hard ethernet line) with 801g. I connect my iMac to AEBS with 801n. I also attach a USB printer and 500G external HDD to AEBS. I formatted HDD with FAT32.
In terms of iMac, everything is working fine; I can print, I can read (or play) the files in Airdisk, and I can write (or copy) the files on Airdisk. No problem.
Dell laptop is a problem. Good things: I can print to the USB printer plugged in AEBS. I can read/play files stored in Airdisk. BAD THINGS: Every time I try to copy a file(s) to the HDD plugged in Airdisk, this error message appears: "the specified network name is no longer available"
If I cannot see the Airdisk at all, or cannot print any documents to AEBS-connected printer, then I may believe the network problem. Well, I can print a paper, I can read/play files in the HDD, but I cannot copy a file to the HDD! The size is less than 400MB, so the size should not be a matter.
I called Apple Tech Support, and they have kept me waiting for 32 minutes (and counting - now is 5:50pm PST - 10 minutes to go!). I have searched Apple discussion, Google, whatever, in vain.
Please share any tips with me. My iMac is run by Leopard, and I have Win XP SP3 for my Dell; Airport Utility is 5.3.2.I solved the problem in this way: i had the hard disk and the printer connected to a usb hub. I tried to directly connect the hard disk to my airport and everything was ok! Now I can copy files without any problem...
Hope to help someone else! -
"The Specified Network name is no longer enough"
Hi,
We have our (Windows Server 2008 R2) file server in remote location. I have a Linux server in my location...and I am using Windows 7 Pro 64-Bit.
we have Firewall to Firewall(Both are Sonicwall) VPN enabled between remote site and our location.
I have a Samba Share in my Linux server. I mapped this share as "P"drive in my Windows 7 PC.
While I am copying files from "File server" to local "P" drive....{ I am using xcopy command to copy the files: xcopy "\\fileserver\criss\" "P:\criss\" /Y}..it copies for few seconds and then it says " The specified
network name is no longer enough". some times it copies for long time and then says the same error.
I was able to do this till last week...Some how suddenly its not working...I automated this using Task Scheduler...it worked for 2 months without any issues.
Everything works fine in my Windows XP PC. (Clearly it seems to be an issue with windows 7)
Please help me with this.Kdhara wrote:
M able to copy the files from server to local C, and able to copy to
samba server.....However somehow, when I try to access the fileserver
using RUN command (Eg:\\fileserver <file://\\fileserver>) sometimes
it works fine and sometimes it wont connect and says "The Specified
Network name is no longer available"....I observerd the both ways
around 1-2 Hours ....
So you do not have the issue, that a filecopy operation aborts in the
middle of the operation as you said in your root-post, but that you
sometimes cannot access your W2008R2 server via UNC-path?
In this situation I'd first check, that you do not have any
offline-files defined for that server (- because you need to be
patient, if using this feature, as it takes awhile for this feature to
detect changes in connectivity).
Further as you are using Netbios name resolution and accessing a server
in another subnet do you have a valid WINS-server, which has an entry
for your W2008R2 server, configured on your Win7 PC - or do you have a
correct entry in the LMHOSTS file for your W2008R2 server?
But generally speaking it is quite normal for Netbios name resolution
to fail for quite some time if the Master Browser service in your
subnet changes due to a change of network topology like shutting down a
computer or starting up a computer, etc. . If you don't need the
browsing capabilities, which netbios delivers, it is much more reliable
and quicker to use DNS as name resolution for Windows networks, too.
Wolfgang -
Copying to TC drive results in "network name is no longer available" error
Hi --
We have a Western Digital MyBook hooked up to Time Capsule and are using it as shared storage. I can view the drive and copy down files with no problem. However, I am now having trouble copying large files (e.g. videos) to that connected drive. Small files are not a problem, but anything over a few hundred MB produces a "network name is no longer available" error on XP.
Note that copying files FROM the TC-connected drive to a local drive is no problem, even for large ones -- a 600MB file takes about 2 minutes over wireless. But if I try to copy that same file BACK to the TC drive, I get the error.
One strange thing I noticed is that when copying FROM the TC-connected drive, right away I get the usual dialog box showing copying progress. But when copying TO the TC-connected drive, the dialog only shows up after about 30 seconds. And the actual progress bar never moves -- it just spins for about 30 more seconds and then shows e.g. "Cannot copy Wonderboys: The specified network name is no longer available"
Any suggestions on how to debug this further?
RamonHi --
We have a Western Digital MyBook hooked up to Time Capsule and are using it as shared storage. I can view the drive and copy down files with no problem. However, I am now having trouble copying large files (e.g. videos) to that connected drive. Small files are not a problem, but anything over a few hundred MB produces a "network name is no longer available" error on XP.
Note that copying files FROM the TC-connected drive to a local drive is no problem, even for large ones -- a 600MB file takes about 2 minutes over wireless. But if I try to copy that same file BACK to the TC drive, I get the error.
One strange thing I noticed is that when copying FROM the TC-connected drive, right away I get the usual dialog box showing copying progress. But when copying TO the TC-connected drive, the dialog only shows up after about 30 seconds. And the actual progress bar never moves -- it just spins for about 30 more seconds and then shows e.g. "Cannot copy Wonderboys: The specified network name is no longer available"
Any suggestions on how to debug this further?
Ramon -
WinXP to Mac - The Specified Network Name is No Longer Available
Hello,
I cannot figure out, for the life of me, why our WinXP machine won't connect to our Mac.
Mac: Powerbook G4 running OS X 10.4.7, WIndows File Sharing is active and an account is selected which will use Windows sharing.
PC: Windows XP Home Edition, SP2. A file share is active.
We're both using wireless connections via a D-Link DI-624 router. Both the Mac and PC are on the same workgroup and have different machine names. Both are on the same subnet.
The Mac can connect to Windows XP share directories and printers without a problem. The Windows XP machine can browse to the Mac's web page when the Personal Web Sharing on the Mac is active. The XP machine can even ping the Mac's address with no packet losses.
However, when the XP machine tries to connect to the Mac (via Map Network Drive or from the command line) using \\machine\share, we get the following error: "The Specified Network Name is No Longer Available". The Mac's machine name shows up when we do a search for computers, but gives us that same error when we double click on it. Furthermore, the printer name does not show up in the printer list, although the Mac's machine name does.
Any ideas? Any more information needed?
Thanks a lot. This problem is driving me insane. :/
ScottI finally figured it out! It had to do with the smb.conf file and a missing file. Here's what happened (for people with future problems like this):
o Looked at the log.smbd file (in /var/log/samba) and saw errors about not being able to convert from CP0. Searched online and found (from http://discussions.apple.com/thread.jspa?messageID=2490054�) that I needed to change 'dos charset = 0' to 'CP850'...
o In Terminal, did a 'sudo pico /etc/smb.conf' and changed the line "dos charset = 0" to "dos charset = CP850"
o Still didn't work, and found from the log.smbd file that the convert msg was gone, but was replaced with a "Failed to open /private/var/db/samba/secrets.tdb" msg.
o I saw that the directory (at the ..../samba level) didn't exist, so, from Terminal, I used sudo to create the /private/var/db/samba directory (sudo mkdir /private/var/db/samba), and did a 'sudo touch secrets.tdb' to create the file, then 'sudo chown root:wheel secrets.tdb' to assign the correct user/group.
Used 'sharepoints' program to create shares and voila! It works great now!
To share my printer, I'm using bonjour, which is a free printer/etc. sharing program from Apple for those with OS X 10.4 (Tiger) and WinXP/2000/2003 machines (http://www.apple.com/macosx/features/bonjour/). -
Could not join "wifi network name". A connection timeout occurred.
Mac Pro running 10.7.5.
Whenever the computes wakes from sleep or logs in, it no longer automatically connects to my wifi network. When I manually select the network for from the Wi-Fi status in the menu bar, I get the following message: Could not join "wifi network name". A connection timeout occurred.
Even though I get that message the machine joins the network with no other problems. I am led to believe that is is on the Mac Pro as my Macbook and iPad/iPhone join the network with no issues.
I have tried deleting and restoring the preferred network, and remember networks is checked. I have also restored my airport express base station.
Any suggestions?Hello,
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed. -
How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility? My company is using an Airport Extreme in our office now and I want to prevent other employees from messing with the network/settings. Is there a way to place a password on the settings to allow only the admin to access the network name and password?
Hi - you have will have to change the device passwords on all the base stations and then don't give them to anyone except the administrators and tell them not to save them on their computers that use the older versions of the Airport Utility - for the newer versions like the mobile apps, as soon as you enter the pasword it is saved and is visible in the advanced pane along with the network password - so if anyone gets a hold of your iPad or iPhone, they can edit the whole network - I have this same issue with my networks in the office and it is inconvenient but doable - I hope this helps
-
Failover Cluster Network Name Failed and Can't be Repaired
I have an issue that seem to be a different problem than any others have encountered.
I've scoured everything I can find and nothing has fixed my problem.
The problem starts with the common problem of the cluster network name failing on my 2 node server 2012 file server cluster. The computer object was still in AD and appeared to be fine so it was not the common problem of the object
getting deleted somehow. At the time, there was no other object with that name in the recycling bin, so I don't think it was mistakenly deleted and quickly recreated to cover any tracks, so to speak.
Following one guide, I tried to find the registry key that corresponded with the GUID of the object, but neither node in the cluster had it in its registry (which may be part of the problem).
Since it was in the failed state, I tried to do the repair on the object to no avail.
We run a "locked down" DC environment so all computer objects have to be pre-provisioned. They were all pre-provisioned successfully and successfully assigned during cluster creation. The cluster was running with no issues for a month
or so before this problem came up.
When I do a repair on the object while taking diagnostic logs the following 4609 error appears:
The action 'Repair' did not complete. - System.ApplicationException: An error occurred resetting the password for 'Cluster Name'. ---> System.ComponentModel.Win32Exception: Unknown error (0x80005000)
There appears to be a corresponding 4771 error with a failure code 0x18 that comes from the security log of the DC that states there was a Kerberos pre-authentication failure for the cluster network name object (Domain\Clustername$)
I believe this is what is causing the repair failure. All the information I found related to security error 4771 was either a bad credentials given for a user account or the fix was to reconnect the computer to the domain. I can't seem to find
a way to do this with the cluster network name. If there's a way please let me know.
I've tried a number of things, like resetting the object, disabling it, deleting and creating a new object with the same name, deleting that new object and recovering the original, etc...
Can anyone shed some light on what is going on and hopefully how to fix it other than rebuilding the cluster? I'm quite close to just tearing it down and building it back up but am hesitant because this cluster in currently in production...
Any help would be appreciatedHi,
I don’t find out the similar issue with yours, base on my experience, the 4096 error
often caused by the CSV disk issue, and the 0x80005000 error some time caused by the repetitive computer object in OU. Please check the above related part or run the validate test then post the error information.
Although I do have a CSV, there doesn't seem to be any problems with it and it was running just fine for a month or so before the problem started. I double checked and there is no duplicate computer objects, maybe I don't understand what you mean by
repetitive, could you explain further?
The cluster validates successfully with a few warnings:
Validating cluster resource Name: DT-FileCluster.
This resource is marked with a state of 'Failed' instead of
'Online'. This failed state indicates that the resource had a problem either
coming online or had a failure while it was online. The event logs and cluster
logs may have information that is helpful in identifying the cause of the
failure.
- This is because the cluster name is in the failed state
Validating the service principal names for Name:
DT-FileCluster.
The network name Name: DT-FileCluster does not have a valid
value for the read-only property 'ObjectGUID'. To validate the service principal
name the read-only private property 'ObjectGuid' must have a valid value. To
correct this issue make sure that the network name has been brought online at
least once. If this does not correct this issue you will need to delete the
network name and re-create it.
- This is definitely related to the problem and the GUID probably got removed when we attempted a fix by resetting the object and trying the repair from the failover cluster manager.
The user running validate, does not have permissions to create
computer objects in the 'ad.unlv.edu' domain.
- This is correct, we run a restricted domain. I have a delegated OU that I can pre-provision accounts in. The account was pro-provisioned successfully and was at one point setup and working just fine.
There are no other errors nor warnings.
Maybe you are looking for
-
New to the wireless world and I need help
I have a WRK54G router. I have one desktop wired to the router and one laptop wireless with a WPC54G network adapter. I am using a Siemens SpeedStream 4100 ADSL modem. When I try to access the internet with my laptop or desktop all I get is page cann
-
Bugs After Upgrading to Lion 10.7.2 (Dashboard,Safari,iCal,System Configuration)
I got a lot of bugs after upgrading my Macbook Pro from 10.7.1 into 10.7.2 1. Dashboard : everytime i change something or add a new widget on dashboard, ex : wrote a new stickies, arranging the place of widgets. after shutdown or restart the cha
-
i have done a number of books successfully in aperture 3. I have done a book using instagram photoes. I have previewed the book in PDF and there are no errors. I sent the book off, with a confirmation fro apple that the book was sent. Then i get an e
-
ITunes Producer: Error reading password from keychain ?
I'm using iTunes Producer 2.9 on Mac OS X 10.8.5 When I try to log in using my Apple ID (enabled for iBookStore) I get an error regarding keychain access. Can you please point me to the right direction?
-
How to keep slideshow on one screen in a dual monitor setup
The slideshow shows on my laptop screen which is fine, but iPhoto '09 commandeers my external monitor as well, making it black/blank and unusable during the slide show. How can I continue to work and use my external monitor while playing a slideshow