Network old iMac

I have an old iMac (the iLamp - the first LCD iMac) that doesn't have airport built in. I want to be able to the old iMac connect to my wireless network. I have a netgear router that broadcasts a wireless signal around my house.
What do I need to do have it connect to my wireless network? Could I get another netgear wireless router or a wireless huband have the two connect wirelessly?
I appreciate your help.

Just found this here: http://docs.info.apple.com/article.html?artnum=108038#2
"Question: Since AirPort Express only has one Ethernet port, does it act as a LAN port, WAN port, or both?
Answer: Depending on how you have it set up, the Ethernet port can function as a LAN port (defined as either simple bridging or sharing your Internet connection via network address translation) or a WAN port (connecting to your broadband Internet service provider or upstream router). However, it never acts as both simultaneously in the way that the original AirPort Base Station (Graphite) can. When the AirPort Express is using network address translation, the Ethernet port acts as a WAN port. When it is set up as a WDS remote station, it can act as a LAN port. Assuming that your Internet service provider only gives you one IP address (the most common scenario for homes), this means that AirPort Express can only accommodate wired clients when acting as a WDS remote base station or bridge. Therefore, if you need to support wired clients and only want to get one base station (or router, as it's the routing capacity of AirPort Express that is relevant here), you should get the AirPort Extreme Base Station instead."

Similar Messages

Airport express connection to existing DLink wireless network & old iMac

I have an old iMac (G4 800 mhz). I don't want to buy an old Airport card -- would rather connect to my existing wireless (DLink) network with an Airport Express. Is this possible? Can I go from my cable modem to my DLink wireless router to an Airport Express AND from the Airport Express to my old iMac with an 10/100 Base T Ethernet connection? Essentially will the Airport Express act like an external Airport card? Thanks for any help you can provide... gmosfd
iMac G4 800 mhz Mac OS X (10.4.3)

I bought the old version Airport on line -- the new one will not work with this model of iMac, bummer!

Printing to USB printer connected to old iMac over Network

I have old Rev B iMac running OS 9 upstairs in the office, this has a USB printer connected to it.
Downstairs I have a Mac Mini running OS 10.3.9
Both these machines are networked together via a router. This all seems to work fine, I can see the drives of both computers from either computer.
My problem though is printing. I want to be able to print from the Mac Mini to the printer attached to the old iMac. I've done all the USB printer sharing business on the OS 9 iMac, but it still doesn't appear in the printer options on the Mac Mini.
Is this possible to do? .....looking through the help topics on my Mac Mini, there was several mentions of printing from OS9 to a printer connected to an OSX machine. But I haven't found any mention of being able to go the other way.

There is a way to do this, but it isn't easy. The grim details are:
1. set up the iMac running OS 9 as a print server using the free utility Print66
2. set up printing from the Mac running 10.3.9 in the Printer Setup Utility, choosing IP Printing using the LPR protocol, to the IP address of the iMac. Additional hurdle - you will need to use the third-party printer driver GimpPrint if you are using anything but a Postscript language laser printer on the iMac.
This will work, but unfortunately it is not an exercise for the beginner.
Incidentally, doing it the other way around is considerably easier (printer connected to and shared by the Mac mini running OS X). See Printing to a Mac OS X shared printer from Mac OS 9 via LPD/LPR

Setting up a WiFi network from iMac... works on "old" iMac, not "new"

Hello,
I hope I'm not crazy, or even worse, stupid.
I an running two iMacs in my home office. Old one= 21" 2 Ghz PowerPC G5, purchased summer 2005 and still running like a champ. New one=27" 2.7 Ghz Intel i5. Purchased the new one July 2011. I have a cable modem plugged into the ethernet port on the old iMac. I've been accessing internet on new iMac with wifi and the internet sharing network I set up on old one. I also use wifi on my ipad and laptop. I have never had even a single dropped wifi connection on any of these devices.
I pretty much expected the same kind of result and performance when I reset the cable modem and plugged it into the new imac and took similiar steps to set up internet sharing/wifi network on new iMac. This has not been the case.
What's happening is:
The cable modem plugged to new iMac is working fine; verified with ISP. I set up wifi network on new iMac and turn on internet sharing. I locate my network name on ipad, laptop, even the old iMac, and I see the name in the list, so I figure so far so good. The signal icon appears in menu bar as usual. I open a web site to verify it's working. And it's working...for about 20 seconds. Then I get alert messages that there is no internet connection.
After creating a bunch of new networks and changing channels, changing type of security, even passwords, I realized I wasn't going to figure this out by myself. I'm not a technical person; Apple spoiled me and I stopped learning how to do anything except plug stuff in 20 years ago.
I started researching online including these discussion boards and answers have ranged from "It's the iMac! It's a hardware problem they never fixed! The aluminum case gets too hot!" to, "there's no airport card and you have to buy an external router." I gave up and called Apple, thinking surely they'd be able to give me a straight answer. Ha ha. Nope.
Of course the bottom line is I could buy applecare (haven't yet...haven't used the computer hardly and I'm still under warranty), I could buy telephone tech support, or I can take the machine to the geniuses.
I keep thinking this can't be that complicated. When I buy a new iMac--this is my 4th one--I expect things will get easier, not this complicated mess.
Oh, last I want to include I just reversed everything back to the way it was. My old iMac is connected to the cable modem and the old iMac is back to being my wifi network, sharing internet with the new imac, my ipad and laptop. Easy as pie.
I'm making an appointment with the geniuseses but hoping it's just something I'm too dumb to realize I'm doing wrong.
Thank you in advance for your patience; any help is much appreciated!

SuznK66 wrote:
It never occurred to me that the wireless network/internet sharing thing wouldn't work just as well if not better on a brand new machine with the improved technologies I pretty much expect. Metal could be interfering with the signal? The machine is aluminum!! I'm no engineer but that seems kind of...flawed. I just don't understand.
I think the WiFi antenna is near an edge of the computer to avoid being encased in metal. It should work like t did in your old computer, but as I said, the use of a Mac to share an internet signal is much less common than use of a router so even if the newer computers have a non-optimal design, it might not get widely noticed in forums like these.
Sounds like AppleCare is what you want, so I'd get it and then have them check that your Mac is transmitting thru the wireless card/antenna as strongly as it should be. The antenna clearly works as you can RECEIVE a signal, but the transmitter uses different circuitry than the receiver. By the way, I think AppleCare is a good thing to get for iMacs and for laptops as they are very compact and tend to be more prone to thermal problems than other desktop computers.
I have no idea about routers aside from, of course, the apple air port one that the phone tech support guy mentioned. Are there others that are less money and just as good? I don't feel like rewarding apple for selling me a product that doesn't do what the earlier geration machines did without a problem. Seems like they shouldn't make another $200 because of their flaw. My old iMac's wifi signal was strong enough for a 3500 square foot house, 2 laptops and an iphone.
Would getting an external router definitely solve my problem? Which one would you recommend if I go that route?
I also did not understand why the Apple routers (Airport) were so much more expensive than other brands. So I purchased a linksys n router some years ago and it has worked quite well. They are very easy to configure through an ordinary web browser (some Mac folks prefer the Airport utilities that are used to configure the Airport routers, but I find the web browser interface very easy to use for the non-Apple routers), and they are in very widespread use (linksys isn't the only brand that is good for this, there are others, but I've had good experience with both Belkin and Linksys). You can get very high performing n routers from Belkin and Linksys for under $100. I'd get a router that has dual band (2.4 GHz and 5 GHz), and I think most include standard features like MAC filtering (a security measure), WPA2 security, and I thiink offering Gigabit ethernet ports would be good also in case you connect something to it like a hard drive server or a printer or want a fast local network sometime in the future.
I think the router will solve your problem and do a better job of wirelessly distributing your internet signal, but if the problem is due to a faulty wireless card (that receives fine but doesn't transmit properly) in the new iMac, I'd want to get that fixed under warranty (or AppleCare) now rather than later.
One more thing: if your wireless card in the new iMac is working properly but the physical layout is such that the internet sharing isn't working well, you OUGHT to be able to eventually get it to work by moving the other devices you are sharing with around to different locations, as eventually one should end up in a spot that works. If nothing can receive the shared internet from the new iMac, even when 3 feet away, then something might well be wrong with the new iMac's transmitter.

Advice? Networking Airport Express, old iMac and ethernet converter/switch

Got an old iMac (266 mHz, OS 10.3.9, 384M RAM) I'm trying to get wireless and network with wife's laptop and (in a few weeks) a new MacBook. Internet is from a wireless provider (Clearwire.net) and its modem hooks into iMac's ethernet port. Works great.
Also have an Airport Express and I see two options here: Get an ethernet converter for the iMac or an ethernet switch that would connect to the Airport Express and the iMac (Clearwire modem, iMac and Airport Express are in same room, so wire connections not a problem).
The latter is cheaper (switch vs. converter), but would tie me down to that room. How much of a hassle would it be to network the iMac through the converter since it doesn't have an Airport card? Can I set up Airport Express through the Airport Assistant software in OS 10.3.9 on the iMac even though it doesn't (and can't) have a card?

All I can tell you is how I have my home network setup and hopefully that will give you some ideas. I have DSL at home which came with a DSL modem / Wireless router made by Westell. I have an eMac running 10.3.9 which I have an Airport Extreme card installed. I have my old "Grape" tray-loading iMac running OS9.2.2 for which I purchased an Ethernet-to-WiFi bridge device. And finally I have an ancient Windows ME running laptop on which I have a USB-to-WiFi device (I got it in a trade). All three of these I was able to setup and configure to access the internet via the DSL wireless router.
So to answer one of your questions, yes the Ethernet-to-WiFi bridges work fine, are OS independent, do not require drivers, and won't tie up your valuable USB port instead using the Ethernet port you likely are not using anyway.
However, the one thing I have not bothered to do is to share the computers with each other. In other words, all of them can connect to the internet but none of them are set up to see the others or share files. For what little sharing or file moving I need to do, I just use an USB Flash drive, which all three computers can see/use fine and transfer stuff that way if I need to.
Hope that at least helps a little with your quest,
Patrick

Old imac keep for network ?

I just bought a new imac. I have my 5 year old imac and was wondering what to do with it. I can not figure out how to see it on the wireless network. Was wondering if I could keep it and use it to move files over to its hard disk to keep a backup copy of my stuff ?

HI Donald,
For a wireless network, open System Preferences (Apple Menu) then select: Sharing.
Do this on both Macs. Make sure File Sharing is selected.
Of course, the 5 yr old iMac has to have wireless capability. If you aren't sure, open the System Profiler (Applications/Utilities). Under Contents on the left click Airport. If you don't see Airport then the older iMac can't be accessed over a LAN.
If Airport isn't an option, perhaps Bluetooth will work for you on both iMacs. Open System Preferences/Bluetooth. Make sure both iMacs are "discoverable" ...
It may hinge on which Mac OS X the older iMac is running. For Leopard v10.5 and v10.4, go here for Bluetooth help. http://support.apple.com/kb/ts2318
And read the post here by "Kappy" re: PowerPC / Intel Macs... http://discussions.apple.com/thread.jspa;jsessionid=2D44C98FD54A51D62F460528EED9 61CD.node0?messageID=11336068&#11336068
Carolyn

Can I convert an old IMAC computer with OS 9 operating system from being "dial up" to high speed?

Can anyone tell me how I can convert my old IMAC from "dial up" to go on the internet as high speed? I have an ISP provider for a more modern computer that I own, but I really would like to use my old IMAC on the internet as well? How can I make it compatible with high speed internet? If I try to go on line, the internal modem "dials up". How can I change that and cause it to communicate with my external high speed modem?

Any iMac can connect by ethernet to the router.
You'll need to disable the modem and set up the network config.
Too long since I used OS9 to guide you on that bit; ask in the correct forum;
https://discussions.apple.com/community/mac_os/classic_mac_os or;
https://discussions.apple.com/community/desktop_computers/imac_powerpc

What is the best way to transfer my iphoto library from old imac to new imac. both have iphoto 9.2.1

What is the best way to transfer my iphoto library from current imac to my new imac. Both imacs have iphoto 9.2.1
os on old imac is 10.6.8. os on new imac is 10.7.2. I want the albums and events to stay intact. I have 4500 photos and 79 videos. 14.9 gb. looking for some advice here. Thanks so much.

Connect the two Macs together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN

I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac? Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

I think you may find helpful information here:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

Printer for Old iMac with OS8.6

I'm trying to help a friend with an iMac DVD running OS 8.6. They need to get a new printer. Are there any printers that will run with OS 8.6 or can the old iMac be updated with an earlier version of OSX? Help! Thanks!

My guess would be Mac OS 8.6 can print to any post script printer. OS 8.6 includes the standard postscript print driver. About five years ago, I was able to network from the 8.6 to a networked PostScript printer.
You will want PostScript Leve 3.
Found a printer HP LaserJet 1300 Black & White specs:
http://reviews.cnet.com/laser-printers/hp-laserjet-1300/4507-3159_7-21096963.htm l
These are probably similiar printers HP LaserJet 1xxx
Robert

How do I transfer files from my current imac to the new one. My old imac is running 10.5.8

Hello
I got a new iMac 10.8.2 and also have a iMac 10.5.8 how can I conenct those 2 ?
All I want is to use some of my files on my new one.I don't want to transfer ALL my files,just some,like pictures. But only the once I need. Not all of them.
I have a FireWire cable,don't work, I have ethernet cable,don't work.
So I must do something wrong If someone could maybe explaint it to me step by step that would be great,since I am not a big Mac (computer) freak.
So basically I would like to use my old iMac as a external drive where I could get my files from and transfer them to my Mountain Lion, iMac.
Also If someone knows,why Mountain Lion always loses internet conections,would be also a very big help! Thank you!
But please, in simple step by step explaining. My english is not the best,my German is much better
Thank you so much already for the help, I really appreciated!

Oh, on the losing Internet, try this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
PS. Your English is quite good & completely understandable.

New life for old iMac

My Dad still uses his circa 1998 iMac Rev. D tray loader, since I've kept it alive and up to date by replacing its dead CD-ROM drive from one I bought on eBay, installing more memory (256 MB I think), and OS updates through Panther. He's a cheapskate like me and doesn't want to shell out $1000 for a new iMac. However, lately he's complained this dinosaur was starting to run slow, no surprise since even with a minimal installation of X a few music files and emailed videos left him with less than 400 MB free space on the HD, causing multiple instances of "your startup disk is almost full" messages. Remember this computer shipped with a gargantuan 32 MB memory and a whopping 6 GB hard disk. It ran the latest incarnation of Apple's OS which was OS 8.5. No Firewire on this baby either, so expansion options are limited.
I reasoned I could remove its diminutive 6 GB HD and install the 30 GB HD I pulled from my iMac DV SE some time ago, giving the old iMac some room to breathe. But how to preserve the contents of the hard disk without having to reinstall his programs, files, etc?
Here's how I did it:
Remember there's no Firewire on the Rev. D so there's no way to connect a bootable external hard disk to it. I do have an iPod which has both Firewire and USB cables though. So I connected my 6 GB iPod Mini to the Rev D iMac's USB port, checked "manually manage music" and "enable disk use". Deleted all music files.
Ran Carbon Copy Cloner and cloned the iMac's disk to the iPod (this took a couple of hours over USB). Set the Rev. D aside.
Opened the DV SE and removed its 120 GB HD. Information from this web site was most useful. Installed its original 30 GB. Booted it from my Panther disk and partitioned the HD to contain one 7.9 GB partition and the balance in another. Installed Panther on both partitions. Booted the DV SE to ensure the Panther installation went OK. No problems.
Just for kicks, I set the startup disk to the iPod over Firewire and booted the DV SE from it. Lo and behold it works! there was the old iMac Rev D's old self displayed on my DV SE. Who would think you could use an iPod as a boot disk? Everything worked like it did on Dad's old machine. Weird!
Selected the startup disk to the larger partition of the 30 GB internal HD and booted it. Ran Carbon Copy Cloner to clone the iPod to the smaller partition. This went a little faster since it's now over Firewire. Selected the startup disk back to the smaller partition of the 30 GB HD.
Removed the 30 GB HD and reinstalled the 120 GB in the DV SE. Made sure the the DV SE still works then set it aside.
Opened the iMac Rev. D and removed its pathetically diminutive 6 GB HD. Installed the 30 GB. Closed it up and it attempted to boot. It wouldn't work and got hung on a blue screen. Hmm.
I booted from a Panther disk. I went to reset the user password, but quickly determined there were no users installed on the boot partition. None. Obviously this would present a problem. Apparently it wasn't a good idea to install Panther on the larger partition using an identical user name and password - I think this confused Panther which deleted the account from the boot partition. If I had to do it over again, I would have set up a temporary account so I could boot from the larger partition and use CCC to restore the smaller partition. Anyway, no immediate solution came to mind, so I did an archive and install, preserving user settings and all that.
Oddly enough the only "user" was the system administrator. Fortunately, the system administrator had all the same user settings and files that my Dad had so I simply renamed the home folder, set the login name and password accordingly, and that was that.
For some reason Safari didn't work. Safari would launch, but no window displayed and clicking on the menus did nothing. I could only select "quit" from the Dock. I checked my permissions, trashed the prefs file, everything I could think of, but nothing helped. In desperation I downloaded and installed Safari from Apple's web site (using Firefox which was already installed and fortunately still worked). Amazingly, the same thing happened again. No menus would work. Finally, about to give up, I extracted an older version of Safari from the Panther install disks using Pacifist. That worked! I have no idea what caused this bizarre problem.
Now, back to the reason I started this to begin with. The boot partition is limited to 8 GB which is better than the 6 GB it used to be, but there is only a little more than 2 GB free now. There is another 20 GB on the remaining partition, but how to use it? As I understand it, you can use Netinfo Manager to map the user's "home" directory to another volume. I haven't tried that yet, but when the boot partition nears capacity, I'll give that a shot. I'm not looking forward to the permissions nightmare that may result.
So, success for now. The machine runs like new, sure it's a little slow but he's not running Photoshop or anything. That fan makes a racket – how spoiled we've become.
There was probably an easier way to do all this, but hey, it worked.
By the way my DV SE runs OS X 10.4.9 flawlessly with a new 120 GB HD and 384 MB memory. I have no plans to retire it any time soon.
PB Ti 1 GHz  PB 17 1.33 GHz  iMac DV SE  iMac D  iPod mini  Mac OS X (10.4.9)  Legacy (Appletalk) networked printers  22 years Apple!

Thank you Robert; that's helpful.
The way to map a user's entire Home folder to another volume is simple: In Netinfo Manager, select the desired user, then change his "home" property to the path where you want the new home folder to be. Theoretically this could be any volume anywhere. You can then completely delete the original home folder.
I tried this with a test account and it seems to work ok, I just had one problem with a haxie (cleardock). It won't load its system preference. Don't know if it's related to moving the home folder or not. In any event, I'd do lots of testing before making this change permanent.

I bought a MacBook Air and wish to connect with old iMac 2003-5. The screen on the iMac is black. Can anyone tell me the cable I need to do this please. I have music and photos on the iMac I cannot access. Many thanks. Jax

I bought a MacBook Air and wish to communicate with old iMac G5 2003-5 (sorry can't remember the year). The screen on the iMac is blank and will not come on but the hard drive still works. Can anyone tell me the cable I need to with the iMac & how to do it. I have music and photos on the iMac I cannot access.
Also, do I need to special CD/DVD external drive/burner to import music CD's into iTunes? I have tried and it keeps coming up with formatting problems.
Many thanks. Jax

dwb
I have looked for what you said and come up with these 2 cables. Are these the correct ones I need?
http://store.apple.com/us/product/HA833ZM/A/belkin-firewire-800400-9-pin6-pin-ca ble-2-m66-ft?fnode=51&fs=s%3DpriceLH
http://www.tekserve.com/store/networking-cables-adapters/cables-adapters/apple-t hunderbolt-to-firewire-adapter.html
Many tx again.
JAx

Using the Hard Drive from my old iMac

I have just purchased a new 2.8 Intel core 2 duo iMac and was wondering if I could somehow use the hard drive from my old iMac.
What I have done is buy a case for the hard drive from my old iMac thus making it an external. The question that I have is that since it [the old hard drive] is running OS 10.4 will my new Intel iMac even recognize it.
I would like to somehow switch ALL my vast iTunes library from the old hard drive to my new Intel iMac without have to resort to making as many as 15 data disk. If such a thing is possible how do I go about doing so?
Another thing that I would like to do once my iTunes library is on my new Intel iMac is use the old hard drive [since it is 500GBs] as the platform for all my games and my publishing interest. Doing so would allow me to free up space that I could more readily use for other interest on the 350GB hard drive that my new iMac came with.
HOW do I go about wiping the old hard drive clean so that I can use it thus?
Thank you all for any and all help and insight that you might give me.

You might also consider connecting the two computers into a network, and then transferring the files you need, or even keep both computers online and use network sharing to access files from both computers.
In reference to your question, if you extract the hard drive from your old Mac and put it in an external case, your new Mac will read it no prob. (10.4 is compatible with 10.5). The hard drive can be formatted (wiped clean) using Disk Utility application (click Application, Utilities).
In terms of importing files from old to the new Mac, you might consider using using the automated OS X feature to transfer user files from another Mac.

I want to use my old iMac G3 as second monitor to my MacBook Pro, how?

I want to use my old iMac G3 as second monitor to my MacBook Pro, how?
Thanks!

You can't really do it in any normal way; that is, using the MacBook's video output port.
You can use this program
http://www.screenrecycler.com/home.html
to make your iMac screen act as a second display, over a network connection. ScreenRecycler runs on your MacBook and creates a virtual second display. It uses the open-source VNC (screen sharing) protocol to serve that second display over the local network. You then run a VNC client program (usually free) on the iMac G3 and display the MacBooks virtual second screen in a window, which you can display full screen. Your iMac then appears to be the MacBook's second screen. You use System Preferences Displays pane to set it up, as you would a real second display.
How well this works depends on your iMac's speed, what Mac OS version it runs, and the speed of the network connection. If you connect the two directly with an Ethernet cable (Cat-5 or better), the network speed should be decently fast (at 100Base-T). If your iMac G3 has Tiger (10.4), you can use this program as the VNC client
http://www.jinx.de/JollysFastVNC.html
(there are free VNC clients for 10.3 and earlier)
However, this solution will never be as fast (in terms of screen refresh rate) as a real display using a real video connection. But you can try it at no cost, to see if it meets your needs.

Network old iMac

Similar Messages

Maybe you are looking for