Network Path Error from Windows Clients
Hi everyone,
I have a problem that's been puzzling me. I used to be able to connect to my Mac servers as well as Mac clients with Windows sharing enabled from PCs at my work. I can't recall exactly when it stopped working, but it has. Whenever I try connecting to a Mac from a Windows PC, all I get is the error "The network path \\"server"\"share" could not be found". Here's the scenario:
- Tried connecting to Tiger Server (10.4.2), Tiger client (10.4.4) and Panther Server (10.3.9)
- Neither Windows 2000 SP4 or XP SP2 work (I know about the issues with XP SP2)
- Systems are on the same IP subnet
- All have the same Windows workgroup name
- I've stopped and restarted Windows services, and Windows sharing on Tiger client
- Share points on both servers are configured for SMB
- Tried IP and host name
- Works fine connecting from a Mac using "smb://server" in the Connect To dialog
- I'm able to connect via FTP from the PC
Any ideas are appreciated!
iMacG5, iMac G4, iBook G3 900mhz, 1st gen iPod, iPod Nano Mac OS X (10.4.4)
Have you tried connecting to the share by IP address? try start, run,
\\xxx.xxx.x.xx\
The problem I am having is similar. 10.4.3 server windows shares work for a while, then it stops broadcasting out of the blue. We can still make IP connects to the server, but cannot using the smb name.
Gonna call support today and see what I can find out on my issue. If I find some resolve I will try to post the solution if I get time.
Matthew
Similar Messages
-
ORA-12571 error while creating packages from Windows clients
Hello,
We are facing the ORA-12571 error while creating / replacing packages from Windows Clients connected to a 8.1.7.2.0 db on a Solaris server.
However, there are
1. no errors in connecting and creating transactions from a Sql session
2. no errors in creating / replacing unwrapped/wrapped small (few lines) packages
3. no errors in connecting from a Unix session (remote telnet sessions inclusive).
This happens only when creating wrapped/unwrapped packages, source code of which is greater than 500 kb approx.
Can somebody help me resolve this issue. Any Help would be greatly appreciated.
Regards.
Lakshmanan, KUpdate: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben -
How to access oracle R12 applications from windows client
Hi All,
I installed R12 oracle applications on Linux through VMWare and every thing was fine now. My database listener, database and applications are up and running. I installed Java and Mozillla and established a soft link on LInux but was not able to access oracle applicaitons from Uniix box. I was seeing if i can do it from windows client. Mine is windows vista and i pinged the ipaddress and its connecting but was not able to access applications from windows client and also from linux.
Can any one help me accessing applications from windows client and unix boxHi;
I installed R12 oracle applications on Linux through VMWare and every thing was fine now. My database listener, database and applications are up and running. I installed Java and Mozillla and established a soft link on LInux but was not able to access oracle applicaitons from Uniix box. I was seeing if i can do it from windows client. Mine is windows vista and i pinged the ipaddress and its connecting but was not able to access applications from windows client and also from linux.
Can any one help me accessing applications from windows client and unix box1. Be sure you can ping your linux from your client
2. Be sure your selinux and firewal disable on linux machine
3. Add your IP and hostaname to your windows C:\WINDOWS\system32\drivers\etc\hosts file
4. Add your url to your trusted site on windows
5. Use IE7 or check below note to can use certified browswer and access EBS
Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1]
Regard
Helios -
How to solve this error from window phone 80073cf9 lumia 630.
any one know how to solve this error from window phone 80073cf9 lumia 630.
Hello Muhammad,
We appreciate the post, but this forum is for Windows Store and Phone Developer related questions. Your question can best be answered through the
Windows Phone support page.
Thanks!
-Jonathan
Windows Store Developer Support
Office Store Developer Support -
Remote Desktop disconnected because of security error from Windows 8.1 Surface to Server 2008
Hello,
I am trying
to connect to a remote app on a 2008 server from a surface pro 3 with 8.1
through Netilla SSL VPN and I getting the following error message.
Remote Desktop Disconnected
Because of a security error, the client could not connect to the remote computer Verify that you are logged on to the network and then try connection again
if I am connected to the network and use the RDP file, it connects fine.
This
was previosluly working, but when I changed the terminal server to per user
license mode from trial mode this happen
This works fine from Windows 7 machines.<o:p></o:p>
Any ideas?
Thanks,
DerekHi Derek,
Thank you for posting in Windows Server Forum.
From the error itself it seems that there is some network connection issue with VPN. Kindly see that you get network when you are using VPN connection, also VPN must be running. You can also try to “ping” the remote computer and see whether there is successful
ping result.
Also try to use “Allow connections from computers running any version of Remote Desktop” option on server side and check whether you can remote desktop successfully.
Apart this issue can also be caused due to certificate as VPN can’t resolve the certificate properly and facing this issue because you are facing issue only with usage of VPN (as you have commented). Please check
this link for detail.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Tnsping doesnt work. cant connect to oracle on linux from windows client
Installed Oracle 11g on Linux VM. Tried connecting from Tora/SqlDeveloper from Windows machine, but fails. TNSPING fails. PING works fine. Any idea how to resolve below issue?
Below is the info and checks made :
[oracle@oraclelinux6 admin]$ more *.ora
listener.ora
# listener.ora Network Configuration File: /apps/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = /apps/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = orcl)
LISTENERLX =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ADR_BASE_LISTENER = /apps/app/oracle
sqlnet.ora
# sqlnet.ora Network Configuration File: /apps/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
# Generated by Oracle configuration tools.
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
ADR_BASE = /apps/app/oracle
SQLNET.EXPIRE_TIME=10
SQLNET.INBOUND_CONNECT_TIMEOUT=240
tnsnames.ora
# tnsnames.ora Network Configuration File: /apps/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
[oracle@oraclelinux6 admin]$
[oracle@oraclelinux6 admin]$ ifconfig
eth1 Link encap:Ethernet HWaddr 08:00:27:CA:B7:5D
inet addr:192.168.1.121 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:feca:b75d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:243465 errors:0 dropped:0 overruns:0 frame:0
TX packets:143708 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:347575845 (331.4 MiB) TX bytes:9778008 (9.3 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:36859 errors:0 dropped:0 overruns:0 frame:0
TX packets:36859 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2400424 (2.2 MiB) TX bytes:2400424 (2.2 MiB)
virbr0 Link encap:Ethernet HWaddr 52:54:00:8D:63:05
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[oracle@oraclelinux6 admin]$ hostname
oraclelinux6.localdomain
[oracle@oraclelinux6 admin]$ more /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
10.0.2.15 oraclelinux6.localdomain
[oracle@oraclelinux6 admin]$
[oracle@oraclelinux6 admin]$ sqlplus system@orcl
SQL*Plus: Release 11.2.0.1.0 Production on Mon Dec 2 08:19:59 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Enter user-name: system
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> set head off
SQL> select * from v$instance;
1 orcl
oraclelinux6.localdomain
11.2.0.1.0 01-DEC-13 OPEN NO 1 STOPPED
ALLOWED NO ACTIVE PRIMARY_INSTANCE NORMAL NO
SQL> select * from v$database;
1360274593 ORCL 26-NOV-13 945184 26-NOV-13
1 15-AUG-09 NOARCHIVELOG 1071075
1033565 CURRENT 26-NOV-13 1283 1094699
02-DEC-13 NOT ALLOWED 26-NOV-13 READ WRITE MAXIMUM PERFORMANCE
UNPROTECTED ENABLED 1360252065 1360252065 PRIMARY
945184 DISABLED NOT ALLOWED DISABLED NONE NO NO
NO NO 13
Linux x86 64-bit
2 2 1094771
NO NO NO orcl
0 DISABLED
0
NO NO
LSNRCTL> show inbound_connect_timeout
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
TNS-12535: TNS:operation timed out
TNS-12560: TNS:protocol adapter error
TNS-00505: Operation timed out
LSNRCTL>
[oracle@oraclelinux6 admin]$ tnsping orcl
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 02-DEC-2013 08:11:34
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/apps/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = orcl)))
OK (0 msec)
<msg time='2013-12-02T08:11:55.728-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
</txt>
</msg>
<msg time='2013-12-02T08:13:23.444-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>02-DEC-2013 08:13:23 * (CONNECT_DATA=(SERVICE_NAME=orcl)(CID=(PROGRAM=sqlplus)(HOST=oraclelinux6.localdomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=60806)) * establish * orcl * 12514
</txt>
</msg>
<msg time='2013-12-02T08:13:23.444-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
</txt>
</msg>
<msg time='2013-12-02T08:19:54.141-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>02-DEC-2013 08:19:54 * service_update * orcl * 0
</txt>
</msg>
<msg time='2013-12-02T08:20:00.146-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>02-DEC-2013 08:20:00 * service_update * orcl * 0
</txt>
</msg>
<msg time='2013-12-02T08:20:03.639-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>02-DEC-2013 08:20:03 * (CONNECT_DATA=(SERVICE_NAME=orcl)(CID=(PROGRAM=sqlplus)(HOST=oraclelinux6.localdomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=60970)) * establish * orcl * 12514
</txt>
</msg>
<msg time='2013-12-02T08:20:03.639-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
</txt>
</msg>
[oracle@oraclelinux6 admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 02-DEC-2013 08:25:38
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
TNS-12535: TNS:operation timed out
TNS-12560: TNS:protocol adapter error
TNS-00505: Operation timed out
[oracle@oraclelinux6 admin]$
[oracle@oraclelinux6 admin]$ lsnrctl status LISTENERLX
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 02-DEC-2013 08:29:23
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENERLX
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 02-DEC-2013 07:55:29
Uptime 0 days 0 hr. 33 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /apps/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /apps/app/oracle/product/11.2.0/dbhome_1/log/diag/tnslsnr/oraclelinux6/listenerlx/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "orcl.localdomain" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.localdomain" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
[oracle@oraclelinux6 admin]$
CLIENT SIDE :
C:\Windows\system32>ping 192.168.1.121
Pinging 192.168.1.121 with 32 bytes of data:
Reply from 192.168.1.121: bytes=32 time<1ms TTL=64
Reply from 192.168.1.121: bytes=32 time<1ms TTL=64
Reply from 192.168.1.121: bytes=32 time<1ms TTL=64
Reply from 192.168.1.121: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.1.121:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Windows\system32>tnsping ORACLELINUX6
TNS Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 03-DEC-2013 01:30:13
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
D:\app\Laasya\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.121)(PORT = 1521)) (C
ONNECT_DATA = (SERVICE_NAME = orcl)))
TNS-12535: TNS:operation timed out
# tnsnames.ora Network Configuration File: D:\app\Laasya\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = Laasya-PC)(PORT = 1522))
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Laasya-PC)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
ORACLELINUX6 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.121)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)f0c7e0f7-dab5-4b63-a36c-04b7e8eb552d wrote:
Installed Oracle 11g on Linux VM. Tried connecting from Tora/SqlDeveloper from Windows machine, but fails. TNSPING fails. PING works fine. Any idea how to resolve below issue?
Below is the info and checks made :
[oracle@oraclelinux6 admin]$ more *.ora
listener.ora
# listener.ora Network Configuration File: /apps/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = /apps/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = orcl)
LISTENERLX =
It is pointless, and just adds to the confusion, to name your listener anything other than the default name of LISTENER
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
Client requests to 'localhost' (or its ip address of 127.0.0.1) never leave the client machine. Hence, any listener configured for that address will never receive a request from any other machine.
ADR_BASE_LISTENER = /apps/app/oracle
sqlnet.ora
# sqlnet.ora Network Configuration File: /apps/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
# Generated by Oracle configuration tools.
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
ADR_BASE = /apps/app/oracle
SQLNET.EXPIRE_TIME=10
SQLNET.INBOUND_CONNECT_TIMEOUT=240
tnsnames.ora
# tnsnames.ora Network Configuration File: /apps/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
See comment above regarding 'localhost'.
(CONNECT_DATA =
(SERVICE_NAME = orcl)
[oracle@oraclelinux6 admin]$
[oracle@oraclelinux6 admin]$ ifconfig
eth1 Link encap:Ethernet HWaddr 08:00:27:CA:B7:5D
inet addr:192.168.1.121 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:feca:b75d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:243465 errors:0 dropped:0 overruns:0 frame:0
TX packets:143708 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:347575845 (331.4 MiB) TX bytes:9778008 (9.3 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:36859 errors:0 dropped:0 overruns:0 frame:0
TX packets:36859 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2400424 (2.2 MiB) TX bytes:2400424 (2.2 MiB)
virbr0 Link encap:Ethernet HWaddr 52:54:00:8D:63:05
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[oracle@oraclelinux6 admin]$ hostname
oraclelinux6.localdomain
[oracle@oraclelinux6 admin]$ more /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
10.0.2.15 oraclelinux6.localdomain
where did that 10.0.2.15 address come from? You don't have any network adapters configured for that address
[oracle@oraclelinux6 admin]$
[oracle@oraclelinux6 admin]$ sqlplus system@orcl
SQL*Plus: Release 11.2.0.1.0 Production on Mon Dec 2 08:19:59 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
A well-documented error.
see: http://edstevensdba.wordpress.com/2011/03/19/ora-12514/ (ora-12514 Listener does not know of requested service )
Enter user-name: system
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Since you did not use a tns service name ('@orcl') this was a bequeth connection to a local database.
SQL> set head off
SQL> select * from v$instance;
1 orcl
oraclelinux6.localdomain
11.2.0.1.0 01-DEC-13 OPEN NO 1 STOPPED
ALLOWED NO ACTIVE PRIMARY_INSTANCE NORMAL NO
SQL> select * from v$database;
1360274593 ORCL 26-NOV-13 945184 26-NOV-13
1 15-AUG-09 NOARCHIVELOG 1071075
1033565 CURRENT 26-NOV-13 1283 1094699
02-DEC-13 NOT ALLOWED 26-NOV-13 READ WRITE MAXIMUM PERFORMANCE
UNPROTECTED ENABLED 1360252065 1360252065 PRIMARY
945184 DISABLED NOT ALLOWED DISABLED NONE NO NO
NO NO 13
Linux x86 64-bit
2 2 1094771
NO NO NO orcl
0 DISABLED
0
NO NO
LSNRCTL> show inbound_connect_timeout
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
TNS-12535: TNS:operation timed out
TNS-12560: TNS:protocol adapter error
TNS-00505: Operation timed out
LSNRCTL>
[oracle@oraclelinux6 admin]$ tnsping orcl
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 02-DEC-2013 08:11:34
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/apps/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = orcl)))
OK (0 msec)
<msg time='2013-12-02T08:11:55.728-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
</txt>
</msg>
<msg time='2013-12-02T08:13:23.444-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>02-DEC-2013 08:13:23 * (CONNECT_DATA=(SERVICE_NAME=orcl)(CID=(PROGRAM=sqlplus)(HOST=oraclelinux6.localdomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=60806)) * establish * orcl * 12514
</txt>
</msg>
<msg time='2013-12-02T08:13:23.444-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
</txt>
</msg>
<msg time='2013-12-02T08:19:54.141-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>02-DEC-2013 08:19:54 * service_update * orcl * 0
</txt>
</msg>
<msg time='2013-12-02T08:20:00.146-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>02-DEC-2013 08:20:00 * service_update * orcl * 0
</txt>
</msg>
<msg time='2013-12-02T08:20:03.639-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>02-DEC-2013 08:20:03 * (CONNECT_DATA=(SERVICE_NAME=orcl)(CID=(PROGRAM=sqlplus)(HOST=oraclelinux6.localdomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=60970)) * establish * orcl * 12514
</txt>
</msg>
<msg time='2013-12-02T08:20:03.639-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
</txt>
</msg>
[oracle@oraclelinux6 admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 02-DEC-2013 08:25:38
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
TNS-12535: TNS:operation timed out
TNS-12560: TNS:protocol adapter error
TNS-00505: Operation timed out
[oracle@oraclelinux6 admin]$
[oracle@oraclelinux6 admin]$ lsnrctl status LISTENERLX
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 02-DEC-2013 08:29:23
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENERLX
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 02-DEC-2013 07:55:29
Uptime 0 days 0 hr. 33 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /apps/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /apps/app/oracle/product/11.2.0/dbhome_1/log/diag/tnslsnr/oraclelinux6/listenerlx/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
See previous comments regarding localhost and 127.0.0.1
Services Summary...
Service "orcl.localdomain" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.localdomain" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
[oracle@oraclelinux6 admin]$
CLIENT SIDE :
C:\Windows\system32>ping 192.168.1.121
Pinging 192.168.1.121 with 32 bytes of data:
Reply from 192.168.1.121: bytes=32 time<1ms TTL=64
Reply from 192.168.1.121: bytes=32 time<1ms TTL=64
Reply from 192.168.1.121: bytes=32 time<1ms TTL=64
Reply from 192.168.1.121: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.1.121:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Windows\system32>tnsping ORACLELINUX6
TNS Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 03-DEC-2013 01:30:13
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
D:\app\Laasya\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.121)(PORT = 1521)) (C
ONNECT_DATA = (SERVICE_NAME = orcl)))
TNS-12535: TNS:operation timed out
# tnsnames.ora Network Configuration File: D:\app\Laasya\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = Laasya-PC)(PORT = 1522))
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Laasya-PC)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
ORACLELINUX6 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.121)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
You've thrown out a huge amount of detailed data, but showing a variety of errors, and combinations. Overall, I get the impression you are confusing remote vs. local connections. Please read the following, then come back and let's focus on one error at a time.
see: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ (Help! I can’t connect to my database )
see: http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ ( Help! I can’t connect to my database (part duex) ) -
How to connect oracle running on RH from windows client
I installed oracle on RHEL4,..everything running well till now...
And suddenly i got a problem, i can't connect from windows to my linux server....
i configured my listener to binding linux server ip host,....and service naming to same ip...
while testing connection i got error message...target host not exist....
Anyone know some similar problem and maybe can help providing solution ? thanks in advance...This is the configuration on my Linux Server :
[oracle@cybertech admin]$ cat listener.ora
# listener.ora Network Configuration File: /home/oracle/product/10.1.0/db_1/netw
ork/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /home/oracle/product/10.1.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = cybertech)(PORT = 1521))
[oracle@cybertech admin]$ netstat -an|grep 1521|grep tcp | grep -v grep
tcp 0 0 127.0.0.1:1521 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:1521 127.0.0.1:32776 ESTABLISHED
tcp 0 0 127.0.0.1:32776 127.0.0.1:1521 ESTABLISHED
This one was my windows client's TNSNames configuration :
# tnsnames.ora Network Configuration File: C:\oracle\BIToolsHome_1\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.200)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
This one was my windows client's listener configuration :
# listener.ora Network Configuration File: C:\oracle\BIToolsHome_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SSL_CLIENT_AUTHENTICATION = FALSE
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = awi)(PORT = 1521))
I tried configuring my linux server host ip to 192.168.0.200 and ping it using tnsping, then i got an error message : "no listener".
should i reconfigure /etc/hosts.conf file to add ip 192.168.0.200..? 'cause there's only one ip "127.0.0.1" in /etc/hosts.conf
thanks for the assistance until now ivan -
No access on podcast share from Windows clients
Hello together!
I have the following scenatio at home:
* 1 Server with Windows 2008 R2 with logged in user and iTunes running (everything is shared)
* 1 Laptop with Windows 7 x64 & iTunes
* 1 Desktop with Windows 7 x86 & iTunes
* 1 Macbook with Mac OS X Leopard & iTunes
With this constellation I want to have access to my iTunes library located on the server from all other computer. With the MacBook this funktions without any problem to access everything (podcasts too).
On both Windows computer the directory pocasts is invisible. I can find the podcast files in the main directory but they are grey and the the playback does not start.
Is here anyone who had already the same problem and perhaps solved it? Thank you in advance for your replies.
P.S. Generally I can play the files by changing the kind of media to movie.
Message was edited by: Mattn81Oleg,
I had the exact same problem here - we have two XSERVE machines here running OSX 10.5.7 server, and we're accessing a samba share on these servers from Windows XP SP3 clients.
When moving a file, I noticed a message in /var/log/samba/log.smbd :
[2009/06/15 12:45:30, 0, pid=50709] /SourceCache/samba/samba-187.8/samba/source/modules/vfsdarwin_acls.c:fsp_setacl(126)
darwinacl: failed to set ACL on <filename>: Invalid argument
!#acl 1
I tried to look this up on google, but had no success.
Searching the file /etc/smb.conf for "acl" showed the following line:
vfs objects = darwinacl,darwin_streams
(Un)commenting this line (inserting a ";" in front of the first character) and restarting s,b solved the problem here - I'm now able to move files without having the permissions set to 0000, and the error in log.smbd doesn't appear any more. -
10g export error on windows client
Hi Friends
I tried to run 10g windows client exp (export database backup)
on my 10g database residing on IBM AIX 5L...but i got the following
error:
EXP-00056: ORACLE error 6550 encountered
ORA-06550: line 1, column 41:
PLS-00302: component 'SET_NO_OUTLINES' must be declared
ORA-06550: line 1, column 15:
PL/SQL: Statement ignored
EXP-00000: Export terminated unsuccessfully
Any help pls....thanks a lotWhat version of the exp client are you running and against what version of the database?
Make sure you use the exp command that matches with the database version that you are trying to export from. -
Network Path Error using Ethernet/IP TagWrite
Hello,
I am having trouble getting the TagWrite VI in the Ethernet/IP Industrial Communications driver package to work properly. I have an Allen-Bradley CompactLogix 1769-L32E PLC connected via ethernet. The controller is online and connected through RSLogix 5000.
At the moment, I am working on writing two simple VIs - one to read and display from a single boolean controller tag using the TagRead VI, and one to write to a single boolean controller tag using the TagWrite VI. Using the code shown below, I am able to read from and display the status of the tag "JogX_In" :
I do this by going online with the controller in RSLogix5000 and manually changing the status of "JogX_In," at which point the status of "JogX_In" is updated on a boolean indicator on the LabVIEW front panel. Using a very similar code to write to the same tag, however, I get the error shown below:
Unless there is a different syntax for TagWrite, I am sure that the network path and tag name are correct as they work perfectly using TagRead. Can anyone please give me some help with this problem? I am by no means a LabVIEW expert, but I have worked with LabVIEW an number of times and have a reasonable understanding of the basics. Please let me know if any more information is needed.
Thank you!Hi Joe,
I am lso getting the same problem, i have tried to use a single element in the array, its not helping. Attached are the screen shots for the VI and the rslogix
thanks
habeeb
Attachments:
eip tag write error.JPG 176 KB
PLC tags.JPG 166 KB -
Transferring network user files from Windows Server 2003 to Mac OSX 10.5.8
I'm wondering if any network admins out there have a suggested method of transferring network user files from a Windows Server 2003 to an XServe running 10.5.8?
When we did the file transfer, clicking and dragging, there were a myriad permissions issues that subsequently arose. Surely there is a way to strip permissions off files PRIOR to the transfer?? Maybe not, but I'm wondering how you folks have done it.
We have had nothing but persistent permissions issues since the transfer (i.e. folks who should have access to files, being denied access, including the local server admin!!). This also translates to synch errors for network mobile accounts.
Thanks,
John Orban
System Administrator
The Country Schoolhttp://www.laurentnomine.com/2009/09/invalid-file-handle-when-copying-files-from -os-x-leopard-10-5-to-vista7/
-
Connect to 11.2 db via SCAN fqdn from Windows client
I am unable to connect to a 11gr2 database (running on RHEL 5.3) from a Windows client via the SCAN name. I can connect through either of the VIP's but not through the SCAN Load Balancer.
$ ./srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node r02hinnod08pp
SCAN VIP scan2 is enabled
SCAN VIP scan2 is running on node r02hinnod09pp
SCAN VIP scan3 is enabled
SCAN VIP scan3 is running on node r02hinnod09pp
$ ./srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node r02hinnod08pp
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node r02hinnod09pp
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node r02hinnod09pp
listener.ora
LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))) # line added by Agent
LISTENER_SCAN3=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN3)))) # line added by Agent
LISTENER_SCAN2=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2)))) # line added by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent
tnsnames.ora
# tnsnames.ora Network Configuration File: /app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
HEALTH =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = r02hindbs01pp.r02.med.va.gov)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = health.va)
SCAN is configured as r02hindbs01pp and is a 3 IP round robin. From the Linux server nslookup resolves both from IP and fqdn (or just the prefix)
VIP's are r02hinclu04 and r02hinclu05 (1 IP each)
I can connect via either of the VIP's fqdn from the client, but cannot connect via the SCAN fqdn
ThanksHi,
I dont know if this solve your problem.
The SCAN IP and VIP IP work together.
The connection of clients to the database is not established by SCAN IP but by VIP IP.
When a SCAN Listener (SCAN VIP) receives a connection request, the SCAN Listener will check for the least loaded instance providing the requested service.
It will then re-direct the connection request to the local listener on the node where the least loaded instance is running. Subsequently, the client will be given the address of the local listener.
The local listener In this context, the LOCAL_LISTENER parameter must be considered. The LOCAL_LISTENER parameter should be set to the node-VIP. If you need fully qualified domain names, ensure that LOCAL_LISTENER is set to the fully qualified domain name (e.g. node-VIP.example.com).will finally create the connection to the database instance.
Read this Oracle Technical Paper.
http://www.oracle.com/technetwork/database/clustering/overview/scan-129069.pdf
Regards,
Levi Pereira
http://levipereira.wordpress.com -
Version: 11.2
Platform ===> Solaris
Does SCAN IP (set in DHCP rather than /etc/hosts file) work only for clients installed in Unix?
I had set up my SCAN ip in /etc/hosts file(not DHCP).
So, this SCAN name works only within nodes. Not from other Unix machines and definetly not from windows machines.Hi VitaminD,
If you do not have a DNS server avaliable at installation time OUI will not let you continue with the installation until you have provided a suitable SCAN resolution.
However, in order to overcome the installation requirement without setting up a DNS-based SCAN resolution, you can use a hosts-file based workaround.
In this case, you would use a typical hosts-file entry to resolve the SCAN to only 1 IP address and one IP address only.
It is not possible to simulate the round-robin resolution that the DNS server does using a local host file.
The host file look-up the OS performs will only return the first IP address that matches the name. Neither will you be able to do so in one entry (one line in the hosts-file).
Thus, you will create only 1 SCAN for the cluster
This workaround might also be used when performing an upgrade from former (pre-Oracle Database 11g Release 2) releases. However, it is strongly recommended to enable the SCAN configuration on “DNS Server” or “The Grid Naming Service (GNS)” above shortly after the upgrade or the initial installation.
Does SCAN IP (set in DHCP rather than /etc/hosts file) work only for clients installed in Unix?
Configure SCAN on hosts file is only a workaround should not be used in a production environment. For the SCAN function properly you must have configured the DNS or GNS
Regards,
Levi Pereira
<font size="1" color="red">Please close your thread when you get the solution to your problem.</font><br>
<font size="1" color="red">Check the replies answered "helpful" answer or "correct" answer that will help other people with same problem.</font><br>
<font size="1" color="red">Thanks for doing your part to make this community as valuable as possible for everyone!</font><br> -
Agentry - Field alignment errors in Windows client
I'm running WM6.1 on the 7.03.605 Windows client and I've been unable to find any solution to field values aligning on top while their labels are aligned to the base of the line. This is somewhat noticeable at the default window size and glaringly obvious if the window is maximized on a larger screen such as 1920x1080.
Is there any option other than rebuilding these screens so they have separate label entries floating above the field values?
The screenshot shows how bad this is. I've drawn a red box around two of the fields to show just how much higher they are than their corresponding label.
Tags edited by: Michael ApplebyHi Chris,
if I remember correctly, the alignment is "correct" for object properties that do not have the "Word Wrap" option checked. A workaround for object properties with "Word Wrap" enabled is the following:
- change the fields object property to :>Main Object>"DummyNoWrap" Property where the DummyNoWrap Property is a String Property that has no "Word Wrap" enabled.
- add an update rule that updates the field with the property you want to display on that field
I do not think this will work on transaction screens, but maybe it covers your problem.
Regards, Daniel -
After running the download i get a mesage error from windows
I get a message from windows saying i have to verify this program? i just downloaded other things and it worked? what is going wrong?
What's the precise text of the message, please, chardy? (There's a few different ones I can think of that you might be getting.)
Maybe you are looking for
-
Can't go back to original Google search page in Safari 5.0.2 update
A couple of days ago updated Safari to 5.0.2. I used to do a Google search, advance thru a few pages, on a link, and then click the "return" arrow in the Google box, top right, and would be returned to my "original" search page. In the Safari 5.0.2,
-
Display Repair Extension Program
Hi, I've got a quite new 15inch PB. (1,67GHz from February '05) My problem is that on my screen are now apearing those white spots which are discribed in the Display Repair Extension Program from Apple, but my PB with this serial-number is not suppor
-
Hi, I am wondering if it is possible to use existing Includes (e.g. constants) in global classes as well. I don't want to create the same constants again and have double maintenance. Is there any trick to point e.g. new class-constants to the existin
-
HT201210 trouble with restore from backup choose
Hi! i got an iphone 3G with older verison (4.1.3) and i wanted to upgrade to a new version ive backup my phone as a NEW DEVISE and saved every thing on my itunes. i upgraded successfully and tried to restore my devise. when i did it first of all i co
-
Does OSX Mail Services allow for common shared IMAP folders between users. I am hoping to allow a number of users to share mboxes in order to allow them access to the entire project email and eliminate constant cc'ing and forwarding of email. I have