Network - print object overview

hello!
i tried to print the object overview in a network (CN22, menu network->print), but the menu-entry is not selectable.
how could i print this overview - is there some customizing missing? the status of my network is already released ...
thanks!
matthias

Hi,
I just went through the same problem. Don't know if it is still open.
In customizing under "Project System"->"Structures"->"Operative Structures"->"Network"->"Printing in Networks" you will find entry "Recommendations for printing and print control". There it is stated that the number of time tickets or number of confirmation slips entered for the activity is greater than zero.
Check in transaction OPS0 if you have set the number of prints greater than zero in menu point "List control for transactions (double clic on the entry).

Similar Messages

Wireless and network printing transcript for Meet the Experts

On March 16th, HP hosted its first online chat event on wireless and network printing. Below is a transcript of that session.
I am in the process of planning the next chat event. I would love to hear what topics would interest you, what day of the week and time is best for you, and if you think an hour is too long.
So, if you get a minute, please let me know.
Here's the transcript:
SiobhanF-HP: Welcome! Cameron, Craig, David, and Jim are ready to tackle your questions.
SiobhanF-HP: Just to remind you if you want to ask a question, you must be a member of the HP Support Forums. If you want to join, go here https://passport2.hp.com/hppcf/createuser.do
nc256: Do I need a wireless router to hook up my wireless printer?
CameronL-HP: No, but most people will want to do it this way. You can use a feature called an ad hoc connection to avoid using a router, but it is only covered under an older standard that is slower and less secure. Also, without something to route traffic between the local network and the internet, you cannot get an internet connection. Using a wireless router makes setting up a wireless network easier, and it will generally make the network work better too.
jest1: I've seen some hardware in stores for a "print server" hardware device that attaches to a network. Is this something that I need in order to run a printer over a network?
CraigB--HP: Not if you have a printer that has a network connection built in. Many models of HP computers are ready to be connected directly to your wired or wireless network.
katiepage: How can I print when I am using a VPN?
DavidH-HP: VPN connections generally hide the rest of your home network to increase the security of the VPN connection. A printer on the network isn’t a security threat but the VPN doesn’t know that. It just hides everything just to be sure. That means that when a VPN is active you need some way to connect to the printer other than your home network. Bluetooth, USB, and even printing to a thumb drive and plugging that into the printer are all ways of getting your print job to the printer that don’t go through your home network.
SiobhanF-HP: If you have specific product questions, the more information you give us the better we will be able to help you. Getting your exact model number; any error messages; a description of your wireless network including what kind of security you have, what wireless-devices are connected to your network, and your IP address will go a long way to helping us answer your question.
MelissaP: Why would I want a wireless printer?
CraigB--HP: The main advantage of a wireless printer is the ability to place the printer somewhere in your home or office even if this is not near your router or computer.
Deltan: What is the maximum distance I can have between my router and my printer?
CameronL-HP: It does depend on your environment. Without interference about 25 feet. Walls and floors and other objects can reduce this. The types of walls are important. For example, mirrors and outdoor walls will greatly reduce the indoor range.
jest1: Is there a preferred wireless router type or brand for wireless printing compatibility? We are using a Linksys 802.11g router in my home.
JimB-HP: In general, any wireless-router from a name brand manufacturer that has been Wi-Fi certified is compatible with our printers (look for the Wi-Fi logo). We use Linksys in our lab with great success.
nc256: Are there any digital cameras that can send directly to an HP wireless printer for photo printing?
DavidH-HP: Many printers support a feature called Pictbridge. If the camera and printer both supports this feature, the camera can be plugged directly into the printer to print photos. Or are you asking about printing over a network connection?
KevinW: I keep hearing that you shouldn’t use default settings for a network. Why?
CraigB--HP: There are three reasons not use default settings: First, wireless-routers do not have any wireless security enabled by default. Second, you will be using a common network name in which case you may connect accidentally to your neighbor’s network. Third, your wireless-router is accessible by inadvertent guests who may change the configuration of your wireless-router without your knowledge or use your internet connection without your permission.
Bodie08: I have an HP Lan attached printer and Windows XP on my home network. Is there a known setting (Firewall/port/other) or patch to address the issue of hpqtra08.exe hanging on Windows XP Shutdown? A number of us in the forum have identified this issue. Thanks!
DavidH-HP: This problem has been seen in the past but there were attempts to address it. Have you checked to see if there is a later release of software available on the web? (hp.com)
ZhuLee3: How old is wireless printing technology? I noticed all the experts have around 20 years of experience with it, was there wireless 20 years ago?
JimB-HP: Wireless printing first appeared with the introduction of the 802.11 standard in late 1990's. HP has been making wireless printers since 2003.
lpeterson123: What makes wireless so flaky at times?
CameronL-HP: There are lots of reasons. Wireless signals are affected by distance, walls, metal objects, and other wireless devices like cordless phones. However, most of the problems seem to be from how the network or how security software is configured, and these can also cause things to fail only occasionally or in certain situations. Having a good wireless connection between a PC and printer involves several hardware devices and lots of software made by different companies that all have to work together; if something is not quite right in any of these things then the whole solution looks flaky.
Bowman16: I use a Mac, are there any features that would not work if I was to set it up for wireless use
DavidH-HP: All the features will work on a Mac if you install the full HP software solution.
jest1: Thanks for the answer on the router question. The next question, then, is to ask what would be a recommended consumer-grade wireless-enabled printer (or series) just so I can start my research.
JimB-HP: Any of our Photosmart or Officejet wireless printers will work with Wi-Fi certified wireless-routers. Our price points really have more to do with how much printing you do. In general, our more expensive printers cost less per page than our less expensive models.
Bodie08: Why would I choose "spooling" on my PC over "direct connect”?
CraigB--HP: In general, spooling allows you to use your program sooner than printing directly.
ZhuLee3: Jim: What is it like to be an "HP Printing Expert"? What kind of stuff do you get to work on, on a day to day basis?
JimB-HP: I really like my job -- I've always been a radio enthusiast so working on 802.11 technology is really a dream job for me. I'm also fortunate to work with a great team here in Vancouver, WA. More importantly, I like designing equipment that people use in their everyday lives.
TEACHER1: Recently I changed routers, now I am unable to print wirelessly, even though the SES and wireless network light are steady on my Deskjet 6980 printer. What is the solution? Thanks.
DavidH-HP: The wireless light indicates that the radio is on but does not indicate that the printer is connected to the network. First check that the printer is connected to the network by printing a network configuration page from the printer.
AgentRed: I get my internet with a Verizon wireless broadband card. Someone told me that wouldn't work with a wireless printer. Is that true?
CameronL-HP: Our wireless printers use the 802.11 b, g or n standard which is not compatible with the wireless cellular standard. It would be like trying to connect to a wireless network using Bluetooth. They are different wireless technologies.
DavidH-HP: Regarding the Verizon card, it is true that you cannot connect the printer over the Verizon connection, but as long as your laptop has Wife you can print to the printer over WiFi at the same time that the Verizon connection is active. This should not be a problem.
jest1: Is there a "minimum" internet connection that is recommended for wireless printing? We live a bit far from the DSL CO so our connection is sometimes flaky. I would guess that incoming speed shouldn't affect my local wireless LAN but I want to ask it anyway
CameronL-HP: There are 2 parts to your home network. 1 is your wireless router which manages your local network equipment, then your network connection to the world wide web which your DSL provider gives you. The connection speed of your local network is not affected by your internet connection speed.
Bowman16: Are any HP printers 802.11n? I do not want to add an 802.11b,g to my network and cause it to slow down.
JimB-HP: Currently, our printers comply with the 802.11g standard. We are investigation the emerging 802.11n standard.
ZhuLee3: Will there be a transcript of all the questions and answers from this chat available for viewing after the session? I think I missed some questions at the start.
SiobhanF-HP: The chat event begins when you joined. Sorry that you can't see what was said before you joined. I hope to have transcript posted tomorrow or on Wednesday at the latest.
nc256: Where is the future of printers headed? Does HP have any interesting plans with printing technology? And what’s your opinion on whether or not color laser printing will ever approachthe photo realism of ink jet color?
JimB-HP: The future of HP printing will be characterized by wireless connectivity to not only computers but to mobile internet devices. In fact, as mobile devices become smaller (think phone or netbooks), the need to print from your mobile device might become more relevant.
jest1: Am I able to print from my iphone to a wireless printer?
CraigB--HP: You can print photos from your iPhone to HP wireless printers and it works great in my experience. Go to http://www.hp.com/go/iprintphoto to get the details.
TEACHER1: Thank you. I printed a page. It shows that wireless is disconnected.
DavidH-HP: Then you just need to input the wireless settings from your new router into the printer. If your printer does not let you input the settings from the front panel, you can use the CD that came with the printer or downloaded from hp.com to configure the printer again ( look for the option to "add a device" ).
ZhuLee3: Question about security... if I get a wireless printer, what’s to prevent other people within range of my printer, from adding it and printing documents? How is this configured on the actual printer?
JimB-HP: The simplest way to secure your printer is to enable WPA-PSK security for your wireless network and to use a security pass-phrase that is at least 12 characters long. This configuration is very safe from intruders for the foreseeable future.
CameronL-HP: It' is also a good idea to use a unique network name, also called an SSID.
carolj: I have a photosmart C7180 and I have it hooked up to my laptop (windows vista) when the setup completed the printer was put in networking instead of printers and I cannot access it or move it out of there. What do you suggest?
CraigB--HP: You might need to uninstall and reinstall. Before doing this, make sure your get the latest driver from the HP support at: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153754&lc=en&cc=us&dlc=en&lang=en&cc=us This is also where you can get a copy of the instruction book.
wizll: Hi, I haven't done much research in wireless printing, but I'm interested as I currently have my printer set up the old fashioned way where it's connected to a networked PC, but if the PC is off I can no longer print, which is obviously inconvenient. Do hp wireless printers have a web gui you can connect to once it's on the home network, or is it simply all done from the printer's interface. I've seen some old wired network printers that only use the printer's ui and that seems like a clunky use.
DavidH-HP: Yes, the HP printers which have networking built-in have what we call an "embedded" web server which allow you to configure settings, check status, and have many other features; on some models you can even scan using the embedded web server.
nc256: Jim: Will color laser printing ever reach ink jet quality for photos?
JimB-HP: While never is a long time, inkjet printers will, for the near future, output higher quality photos.
katiepage: If I'm at home, connected to my office network via VPN, can I access my office networked printers?
CraigB--HP: Yes, when you are connected to the office VPN, you can print to your office printers. However, you will not be able to print to your home networked printers while you are connected to the VPN.
jest1: If a friend comes over to my house with their laptop and needs to print something, are they able to do this just by authenticating with my wireless LAN (assuming I have a wireless printer set up)?
CraigB--HP: In addition to authenticating to your network, you friend will also need to install the printer driver for your printer.
jpszambelan: Is there a wireless USB device of some kind I can connect to my printer if there is no network connection already built in?
JimB-HP: HP sells an accessory that adds Wi-Fi capability to your USB printer (see http://www.shopping.hp.com/product/printer/inkjet/wireless/4/accessories/Q6236A%2523A2L) Also, many higher-end wireless-routers allows USB printers to be connected to them to allow sharing of the printer from the network. Note that this solution often limits you to just printing and not scanning from the network.
rockwoodchev: It seems that my computer can find my printer, but my printer can't find the computer, so that "Scan to computer" won't work. What do I need to do in order to fix that?
DavidH-HP: This can be blocked by security software running on the PC (such as a personal firewall). Make sure that your firewall is configured to allow communication on your local network. You can also unblock specific ports, but the easiest way is often just to allow communication on the local home network. The specific setting varies from firewall to firewall.
SiobhanF-HP: We are nearing the end of our chat session. We only have time for 3 more questions. If we did not get to your question, please post it on the Networking and Wireless board in the Printers and All-in-Ones forum. http://h30434.www3.hp.com/psg/board?board.id=Networking
SSPatrick: Is it possible to print wirelessly to the same HP printer using both a PC and a Mac?
JimB-HP: Yes -- I do this in my home. I have both Macs and PCs on my network without any trouble.
Bowman16: Any plans to do this again?
SiobhanF-HP: Yes we are.
ZhuLee3: Do all of the experts hang out on the HP community? Will we see you posting there after this?
DavidH-HP: Oh yes, whenever time permits. In addition to trying to help people, I learn things too.
JimB-HP: I'm known as Wi-Fi-Guy on the support forums. I hang out there often helping where I can. It helps me be a better designer.
CraigB--HP: I monitor the forums looking for problems to take back to the development lab for investigation. To date, I have only posted one reply.
CameronL-HP: I haven't been involved in the past but expect to be more involved in the future.
SiobhanF-HP: We only have time for one more question. If we did not get to your question, please post it on the Networking and Wireless board in the Printers and All-in-Ones forum. http://h30434.www3.hp.com/psg/board?board.id=Networking
ZhuLee3: Thanks for setting this up!
SiobhanF-HP: The transcript will be posted on http://h30434.www3.hp.com/psg/board?board.id=Networking
TEACHER1: Thank you all for conducting this session !!!!
jest1: Is there an OS limitation to print wirelessly?
JimB-HP: All the OS versions supported by the printer as supported wirelessly. In general, we are compatible with Macs, Windows and Linux.
SiobhanF-HP: We are ending the chat event. Thank you for coming. We hope you found it worthwhile. I will be posting a transcript of the event in the Networking and Wireless board in the Printers and All-in-Ones forum. We will be hosting future Meet the Experts chat sessions on a variety of topics, so please tell us what you thought of the event and how it could be improved. http://h30434.www3.hp.com/psg/board/message?board.id=Feedback&thread.id=525
Live Forum Closed
Message Edited by timhsu on 03-18-2009 05:39 PM
Message Edited by timhsu on 03-18-2009 05:43 PM
I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

I expected this to be released quite earlier. But now that it's in process, I'll wait patiently.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Trouble Printing Multiple Pages in Quick Succession - LaserJet P4015x - Networked Printer

Hi,
We are currently experiencing problems printing multiple pages in quick succession. We use a bespoke Microsoft Access Database to run our Sales Order Processing. As part of this software we print 3 part invoices, credit notes etc on different coloured paper. We do this by printing to different printer trays. Originally we tried automating the printer tray configuration through VBA code using one report and changing the print tray as part of the print process but were having problems with Microsoft Access freezing. As result we have resorted to printing 3 different reports straight after each other (using VBA code) but with each report specified to print from a different tray.
We are current using tray 2 (500 sheet feeder - standard A4 paper), tray 3 (500 sheet feeder - standard A4 paper) & tray 4 (500 sheet feeder - standard A4 paper).
The current setup does print a copy from each tray and does give us what we want apart from the whole print process being very slow.
The first page comes out from tray 2 at the normal speed you would expect from a network printer but then we start to have issues.
Sometimes the second page from tray 3 will come out quickly but the third page (from tray 4) will be very slow or both pages 2 & 3 will be slow to print. There seems to be no pattern as to why these are slow. To make matters even worse sometimes it will print correctly and all three pages come out in very quick succession (although rarely).
We are using modern PC's (running Windows XP SP 3 with 2GB RAM & 160GB HDD) and the print command is definately being sent to the printer in quick succession - as far as I can tell. I have tried to setting the printers to print through the server and setting them up to print directly to the printer using the built in print server in P4015x.
The printers are networked to a Windows SBS 2008 server with quad core processors and 16GB RAM. The server is only used as a file and print server and is not under heavy load.
I will also point out that I have tried printing to another HP printer (4250dtn) and it has exactly the same problems.
I have removed advanced printing features from the printer driver setup on the client PC's but it does not seem to make any difference. I have also tried printing directly to the printer rather than spooling.
I have updated the drivers to the latest one on the HP website and still no change.
I would appreciate any ideas any one might have to sort the problem out.

Did you ever solve this?
I'm doing the exact same thing: three print outs in succession to a specific tray on a network shared printer and occasionally getting a MS Access printing error 2212 counldn't print you object. Printer setup is saved with the reports one for each printer tray.
I'm printing from bespoke MS Access 2002 application using runtime to HP LJ 4100 on Citrix terminal server session.
Any info you have would be appreciated.

COOIS - Saving Object Overview WIP Status layouts

COOIS - Would like to be able to save the layout of an Object Overview - WIP Status report. There is currently NO icons for "choose layout" , "export" or "views" available while in Object Overview.   I need to be able to create a report showing the header and operations list and this is the only way to get both on the screen at the same time.
After I create the report layout with the fields needed, cannot save this format in any way.   The only thing I can do is print the report to a PDF file for others to view. Would like to be able to save the format I have created and bring it up on screen anytime without have to create it from scratch each time. This would prove a great resource if I only had the ability to save the layout. Especially when have a few 100 production orders.
Thanks for all help in advance.
Stan

What happened to my other thread with 4 replies?
Receiving help from Prasobh.
Using COOIS:
LIST    Object Overview
Profile   WIP STATUS         may be company created.
output is a 3 shades of blue and gray Production Order tree.
shows orders header, component, operation and confirmation lists at one time.
Thanks

Powershell Add Network Printer Error

Hope someone can assist me in this.
I am trying to add a network printer using PowerShell but I keep getting the error:
Exception calling "AddWindowsPrinterConnection" with "1" argument(s): "The
printer name is invalid. (Exception from HRESULT: 0x80070709)"
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : ComMethodTargetInvocation
Here is my code:
$PrinterPath =\\server.domain.com\printershareName
$netPrint =new-Object-ComObjectWScript.Network
$netPrint.AddWindowsPrinterConnection ($PrinterPath)
Thanks,
Isaac Oben MCITP:EA, MCSE,MCC <a href="https://www.mcpvirtualbusinesscard.com/VBCServer/4a046848-4b33-4a28-b254-e5b01e29693e/interactivecard"> View my MCP Certifications</a>

Yes, the name is valid. If I run just a direct PowerShell on my workstation it adds the printer with no issue but when I run the script on a remote computer that's when I get the error.
Isaac Oben MCITP:EA, MCSE,MCC <a href="https://www.mcpvirtualbusinesscard.com/VBCServer/4a046848-4b33-4a28-b254-e5b01e29693e/interactivecard"> View my MCP Certifications</a>

Network Printer Configuration

Hi everyone,
We have printer model Xerox WorkCentre 7228 and i have to configure it as network printer.
I have the name of the printer and its IP address.
I have 2 questions?
1. We have SAP installed over HP-UX, so do i have to install unix driver for that network printer?
2. The printer model Xerox WorkCentre 7228 is not listed in the Device types in SPAD,
I checked the manufactiurer's website and they are providing device types for SAP R/3.
How do i proceed, i mean download the device types, and then how to make that info available in SAP?
Please help.
Thanks
Nanda

Hi Nanda,
The printer can be configured using one of the following types.
1) Using SAP protocal
In this type of configuration, you need to install the network printer on a windows server where you have the SAPSprint installed. For these type of the printer select the Access method 'S'. Give the host printer name as the same name that you have given in the windows server.
2) Using third party Print setup
In this you have to choose the Access method as 'E'. But in your case, it involves complete set up of the external Output management system like HPOMS, Columbus OM etc...Give the host printer name as the same name that you have given in the External Output Management system.
3) Printers set up on the server.
In this type you need to choose the Accessmethod as 'L'. You need to contact the HP-UX team to configure the printer on the server on which your SAP runs. Give the host printer name as the same name that you have given in the HP-UX server.
4) Printing using LOCL.
In this type of the printer you need to choose device type SWIN and the Accessmethod as F. In this case you need to choose the host printer as __DEFAULT( 2 times Underscore ). This will print on the default printer of windows system of the user who ever is printing on that.
For the Device Type, even we have setup a printer using POST2 device type and is working fine.
Please go through the below notes.
Note 8928 - List of supported printers/device types.
You can find some other notes specific to Xerox Model.
For device type installation we should have that object present in our system.
SPAD-> Utilities -> Import device type ->
In screen select device type radio button, and mode as import
Give location of that object and execute.
You will have to select that object again by browsing it then give it as local object.
Thanks,
Nick S

AIO Remote wont recognize my network printer deskjet 3050

AIO remote app (IOS) did not recognize my network printer (Deskjet 3050), other apps (printer pro lite) did recognize the printer flawlessly, both the printer and the iphone are in the same network, I can print from my PC and my mac but not from AIO remote app (not even recognize the printer).
Can you help me?

Hello MrCrysis,
With the Printer Pro Lite app working to printer, this is excellent to hear. Although this is not an HP app. So to explain as to why the AiO Remote app is not recognizing your printer, and not being able to scan. Your printer does not have AirPrint capabilities according to the 'HP Deskjet 3050 (J610) and 3050A (J611) All-in-One Printer Series Product Specifications'. AirPrint is a requirement for the HP AiO Remote app to work, and because the printer does not have AirPrint the app can not see the printer.
Regards .
I worked on behalf of HP

HP LaserJet - network printer problem FIXED

Hi,
I'm aware this may not work for all, but I've sorted my own problems, which I suspect are common to many who still have a really solid HP (or other) network printer that was no longer available since Snow Leopard did away with Apple Talk.
The answer is to do a cold reset on your printer, give it a new IP address, find this IP by printing a configuration page and enter this IP when you go to set up a new printer. In my case, it automatically found the correct drivers. The drivers were never the issue with vanishing printers; it was all about the network IP address. A quick search online and you will find how to do the cold reset and config page. For my 2100TN, it was a case of holding down the cancel button when powering up the printer until the lights flashed for a new IP, and to print, press both buttons.
Hope this helps.

Problem solved.
I upgraded the printer's firmware which resolved the issue.
Thanks anyway! :-)

How do I use the filter to automatically print email and .pdf, .xls, .doc attachments to my default network printer and to other network printers

I receive sales orders by email. I want to filter some to print on my default network printer and others to print on another network printer. The email body must print as well as txt, .pdf, .xls, .doc attachments.

You can filter messages to file them to a certain folder, but I don't think you can have Thunderbird to automatically print them.

Cannot find HP AiO networked printer

Spent over 1.5 hrs with HP support to no avail...thought someone here may have some additional information.
Have an HP PS3210 AiO printer connect via USB to my MBP. My wife can print fine as long as I'm home and my computer is on. When I am away she must connect her PB to print. No big deal but an inconvenience.
The 3210 has built in networking so I tried to connect it to the wireless router for network printing with a wired (Cat 5) connection. HP software could not find the printer. Uninstalled and re-installed software with most current version, still could not find the printer. Here's what's weird. Both machines can find the printer by entering the IP address in a browser window. It prints, scans, shows ink levels, tech data, everything. On the PB I can manually install the printer by going to printer setup utility, add, default browser, more printers, then selecting HP IP printer from the drop down menu but I cannot do it on the MBP. HP IP printing is not offered as an option. Even after adding the printer manually, printing a test page so I know it works, when I run the HP device setup program it still does not find the printer.
I have tried disabling the firewall on both machines, no change. HP says I have a problem with Bonjour, that it must be working properly in order for the software to see the printer on the network. If that's so, how come everything else seems to see the printer?
I have alot more faith in the knowledge available on this board than anythig HP can do for me. Any ideas or suggestions????
Thanks!
MBP 2.33 C2Duo Mac OS X (10.4.8)

You're very welcome, and that's great news. Now because you were able to add the printer and successfully print from the EWS, it let's us know that everything is set up properly we just need to contact the router manufacturer and have them open up some ports that may be blocked.
When you contact them please tell them to make sure that the bonjour multicasting is enabled on the router. Now you will need to make sure that the following ports are unblocked:
UDP: 427, 161, 137, 138,
TCP: 9100, 9220, 9500, 137, 139, 427
Bonjour Ports: 80, 443, 5222, 5223
Once these settings are changed and ports unblocked you should now be able to successfully print to your D110a.
Let me know how everything works out!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Deskjet 3050a cannot find network printer

I need to find out what my IP address is for my printer. I may have changed it accidently when I was trying to set up my printer to a new router. I have reset the default settings. I have tried to go to HP file where it says I can change my IP address and I get the error "cannot find network printer". I have done all of the obvious deinstall, reinstall, added MAC address to router. Nothing will recognize my printer. Please help. Thank you

Hello again,
OK, thanks for the updated information. Try these steps...
Changing wireless settings
If you decide to change the wireless network settings for your wireless home network, you will need to configure your wireless printer with the new settings.
To configure the new wireless settings on a printer that features a Wireless Setup Wizard:
From the printer’s control panel, open the Wireless Settings menu. Many products provide access to the Wireless Settings by pressing the Wireless Button or touching the Wireless icon on the printer’s control panel. Consult the printer’s help documentation if you do not know how to access the Wireless Settings menu.
From the Wireless Settings menu select Wireless Setup Wizard. The Wireless Setup Wizard will guide you through the process of configuring your printer with the new wireless settings. Input your Wireless Network Name and Wireless Password when prompted.
You can print a Wireless Network Test report from the Wireless settings menu to confirm the printer was successfully connected to your network.
To configure your wireless settings on a printer that does not feature a Wireless Setup Wizard:
First, make sure your computer is connected to your network. You will also need a USB cable, which is temporarily used during the configuration. Be sure NOT to connect the USB cable between the computer and printer until instructed to do so by the software.
If your HP printer software is already installed on your computer Windows XP, Windows Vista or Windows 7:
Use Start -> Programs -> HP -> <your printer model> -> Printer Setup & Software. Windows 8:
Launch the Printer Software from the Start screen (icon for the printer model name) or from the tile named for your printer.
Select (click or touch) Utilities on the top of the Printer Software screen
Select Printer Setup & Software
Also,
Link below for some useful information on getting your printer back on the network........Good Luck!
http://www.hp.com/global/us/en/wireless/reconfiguring-system-help3.html
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

How to connect my mac book pro to network printer Canon IR 2010f?

I'm desperate to know how to connect my Mac book Pro to network printer Canon IR 2010f. This printer has an independent system, therefore, no need a PC to be on, in order to print. But this printer is a network printer. Help me please.

The Canon UFR2 v2.20 driver for Mac OS X does not list the iR2010F as a supported model. The same is so for the Canon PS driver so I therefore believe this model is PCL5e only.
What you should do is open Safari and type the IP address of the iR2010F. This will connect to the internal web page of the copier and from the provided pages you should be able to see what printer languages are supported.
If it only lists PCL then you will be able to print to this copier using the Generic PCL driver included with 10.6.
So if you open Print & Fax, click + to add and then select IP > LPD for the protocol you can then enter the IP address of the iR2010F and leave the queue name blank. For the name you can change that to iR1020F and for the Print Using, select Generic PCL Laser Printer.
One note with regards to this driver. It is defaulted to 300dpi so you will need to open the print dialog when you do print and change the resolution to 600dpi to get better print quality.

How to print a report on local/network printer(Sample Code)

Hi forms Gurus,
I'm looking for sample code witch allow to print report on local/network printer from Forms builder.
Plz help! it's very important.
TYAG.

Armand,
for Forms and Reports 9i, the only chance is to configure the printer as a network printer that is accessible to the Reports Server. In this case pass the printer's network name as desname and destype=printer as the Reports destination (e.g. desname=\network\printername destype=printer).
Alterantively, there exist an unsupported utility orarrp that you can get from the otn.oracle.com/products/forms web page.
Frank

Urgent..blank report on network printer

Dear All,
i've a report which print direct to a network printer i specify the full network path in DESNAME where destype = printer but the paper in the printer move but nothing is printed.
when i let destype=screen and specify the network printer from normal dialog it prints fine..
more question how can i know that the report server has access to that printer
i'm using REPORTS 6i
please help

If it was that urgent I would have supplied some more information. One very, very, very important fact to know is whether it's Client/Server or Webbased reports, don't you think?
Have you been on the Reports Home page yet?
http://otn.oracle.com/products/reports
There're tons of good white papers there, including one regarding printing on the net.
Also this search on Metalink gives me lots of usuful documents: reports 'network printer'
Regards,
Martin

Unable print scheduled report on network printer using BOEXI 3.0

Hi,
I'm unable to print a scheduled report on network printer using BOE XI 3.0. I get the following error
Error Message: Error in File ~ce6a054be1a25b52.rpt: Request cancelled by the user. ]
Has anyone encountered this kind of problem and know what the solution is?
Thanks,

Hey Falk,
Thanks for the response.
I can print on a network printer after I changed 'Crystal Reports Job Server' to run under a user account that has privileges to access the printer.
To answer your questions regarding the problem:
>Can you schedule the report successfully ?
>>Yes I was able to schedule the report successfully
>Can you print the report successfully?
>>NO the scheduled task would fail with the error message as posted above.
Thanks,

Network - print object overview

Similar Messages

Maybe you are looking for