Network printer error: the 'ipp' process stopped unexpectedly with status 1

i have [3] macs connected to my studio airport extreme network. i have a powerbook G4, with our plotter and epson photo R1800 connected to it. my mac book pro can print to the epson just fine, but my primary workstation [G5] will not print to it. i get an error message "the 'ipp' process stopped unexpectedly with status 1". please help, i need to print.
- all printers are excessable and work via the airport network
- the printer is available in the shared printer list [duh]
- as stated above the printer connection trys to open than shuts down, over and over.
- the epson use to be connected directly to the G5 and worked fine, the G4 as the proper driver and can print files fine.

You might try checking the Console log (in Utilities/Console) and look to see if you have this error:
Dec 19 00:22:33 PowerBook crashdump[367]: PrintJobMgr crashed
Dec 19 00:22:33 PowerBook crashdump[367]: crash report written to: /Library/Logs/CrashReporter/PrintJobMgr.crash.log
You can also look in the above referenced /Library/Logs/CrashReporter/PrintJobMgr.crash.log file for any Exception for the PrintJobMgr process.
This currently seems to only affect PPC but not Intel processors. Is this the same for your case?
Message was edited by: kae

Similar Messages

Printing Problem - the process "mdns" stopped unexpectedly with status 1

I have been trying to get my Epson Stylus rX620 to print wirelessly for a while. It actually worked once and printed two separate documents. Then however it decided not to work any longer and it seems that nothing I do changes it. The same error message appears each time in the print monitor:
the process "mdns" stopped unexpectedly with status 1
It has printed wirelessly with the same equipment. It is attached to an airport express that is linked to extend my wireless network from an Airport Extreme. It has no problem printing when the USB cable is plugged in directly. I have tried everthing that I can think of. Any ideas??

Hi John,
Okay, that was some new information...
Given that the hub is causing the problem then I would concentrate on testing it. Try connecting the Mac and the printer directly to the hub. Ensure the IP addresses of each device (Mac and Printer) are set to the same subnet (if printing via TCP/IP) or if AppleTalk is being used, make sure it is enabled on both devices.
You may also have to create a new printer. When you had the printer connected to the USB port of the AEBS, it will have been configured as a local device but printing via a virtual USB port. When the printer was connected to the hub, it would have been configured as a network device.
If this works then at least you know that the hub and the network cables are okay. The next step would be to ensure the AEBS, the printer and the Mac are all set to use the same protocol.
If they are all correct then try deleting the printer from the Printer List, running the Reset Printing System function and adding the network printer again. If you are using TCP/IP, you could even try pinging the printer to ensure the path to the printer is open.
Regards,
Paul

MAC OS-X 10.4.11 PRINTER SAMSUNG SCX-4521 SAMSUNG CLX-3185 The process "rastertoqpdl" stopped unexpectedly with status 1

MAC OS-X 10.4.11 PRINTER SAMSUNG SCX-4521 SAMSUNG CLX-3185 The process "rastertoqpdl" stopped unexpectedly with status 1

Hi Paolo,
Might try these two...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html

MacBook won't print PDF files, it states The process "pstopdffilter" stopped unexpectedly with status 1

Question: MacBooK won't print PDF files, after selecting print it states; The process "pstopdffilter" stopped unexpectedly with status 1. I am currently using a HP Deskjet 4400 series printer and it works fine with all our other lap top computers. Thanks for any help.

The pictwpstops filter on OS X machines, converts the job to straight Postscript before the normal CUPS filters get it.
If the Adobe APPs have a choice of what kind of PS to send, like Binary or ASCII, try toggling that setting to the opposite of what it is.
Though, if a reboot fixed it then likely the problem was a remporary bit flip, which may or may not happen again.

Message on C8100: The process "usb" stopped unexpectedly with status 81. What should I do?

Our C8100 printer has worked well with our wireless setup for a few years. It is now not printing from any of our home computers (wireless is working fine on these Mac's). I've already turned off both computers and printer, waiting a few minutes and turned them back on.
Message on computer screen -- The process "usb" stopped unexpectedly with status 81. What does this mean?

Yes it is a photosmart C6380 all in one
You are lucky. That model gives you an option not offered on cheaper printers.
You could abandon the USB connection completely and use ethernet to print. That model has, in addition to USB, an ethernet (or "network") port and wireless connectivity. Wireless can be flaky but ethernet is an amazing way to print--faster and more stable that using USB. The port should should be just above or below the USB port.
If your computer is already connected to the internet via ethernet, you can get an inexpensive ethernet router to create enough ports. The router goes between your modem and the computer gear. One router port is usually marked "WAN" and is where you connect an ethernet cable going from the modem. The router will have several other ports marked "LAN" that those connect yo you computer equipment.
You are basically splitting one ethernet line into several. If you have only the iMac and the HP printer, each one would connect to its own LAN port and you can print without USB issues. Normally setting up a wired router takes no software and no tweaking on your part. You connect the wires and it's running.
Here's a start on learning about home networking. In teh picture, what's labeled "gateway" is the router.
http://en.wikipedia.org/wiki/Home_network

Unable to print: "hppostprocessing" stopped unexpectedly with status 2

Hello
I have several printers installed in my mac and have used since ever without any problem. Lately i tried to install a new HP photo-printer in the printer setup but not managed. The problem is that since then, i can't use any of my previously used printers. For any print i try with any of the printers i used before i get the systematic message:
"The process "hppostprocessing" stopped unexpectedly with status 2"
and nothing get printed, the job just dissapears from the queue.
Any hint?
thanks in advance
Diana1

Thanks a lot for the link.
The best tip was using Printer Setup Repair:
http://www.fixamacsoftware.com/software/psr5/PSR5ug/512.html
This allowed me to realise that all, and only, the HP drivers had disappeared from my Mac- don;t know how...
Anyway, i installed them from HP:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=412144&prodNameId=412155&swEnvOID=219&swLan g=8&mode=2&taskId=135&swItem=lj-57300-1
And know all seems OK
Thanks a lot
Diana1

Process "cgpdftops" stopped unexpectedly with status 1

Suddenly my iMac G5 has stopped printing to my Kyocera-Mita FS1010 laser printer. The printer has done over 6,000 pages in this set-up.
The printer is set as USB to an Airport Express, the computer is an iMac G5 running Mac OS X (10.4.11).
The message in the print window is The process "cgpdftops" stopped unexpectedly with status 1.
the cups log is:
I [11/Nov/2008:16:41:57 +1100] Adding start banner page "none" to job 2000.
I [11/Nov/2008:16:41:57 +1100] Job 2000 queued on 'KyoceraFS1010' by 'ian'.
I [11/Nov/2008:16:41:57 +1100] Started filter /usr/libexec/cups/filter/cgpdftops (PID 1625) for job 2000.
I [11/Nov/2008:16:41:57 +1100] Started filter /usr/libexec/cups/filter/pstops (PID 1626) for job 2000.
I [11/Nov/2008:16:41:57 +1100] Started filter /usr/libexec/cups/filter/kyofilter (PID 1627) for job 2000.
I [11/Nov/2008:16:41:57 +1100] Started backend /usr/libexec/cups/backend/mdns (PID 1628) for job 2000.
E [11/Nov/2008:16:41:57 +1100] [Job 2000] Couldn't create CGPS Context. The likely problem is a permissions problem with the /tmp directory.
E [11/Nov/2008:16:41:57 +1100] PID 1625 stopped with status 1!
I [11/Nov/2008:16:41:57 +1100] Hint: Try setting the LogLevel to "debug" to find out more.
I ran disk utility to fix permissions, but the printing didn't work
I booted from the install disk and repaired the disks (no problems found)
I am now able to print using Adobe Reader, but not Microsoft Word or TextEdit (the only two I have tested)
Printing to my inkjet printer works fine for all applications.
I desperately need help as I have heaps of stuff to print for a meeting this Friday.
Thanks
Ian

I have completed all you suggested, including re-installing drivers. The result is the same.
The printer is physically attached to my Airport Extreme as a USB Printer.
I can print successfully to the printer from the iMac G5 when using Adobe Reader.
I cannot print using Word, Excel, TextEdit, Safari, Mail or Preview using iMac G5. Others not tested.
I can print from my MacBook to the printer for every application thus tested.
Thus there is nothing wrong with the Printer, nothing wrong with the Airport Extreme.
The problem lies within the iMac G5 and the software/server used by the G5 to print. Presumerably the Adobe Reader prints using its own software/server.
What else can I do?
Ian

How do I fix it :: pictwpstops stopped unexpectedly with status 1

I get this message only when printing from Quark
pictwpstops stopped unexpectedly with status 1
I have deleted and replaced all ppd's and drivers relevant to the Xerox and have re-installed QuarkXpress 6.5 an it still does it I dont't have the problem with any other app, does anyone know how to fix this, it's sending my insane!!!!!!
[email protected]

'pictwpstops' stands for 'PICT with PostScript'. PDF is the standard spool file format, but for backward compatability with applications like Quark that generate their own PostScript, the 'pictwpstops' filter is used to create the spool file.
As has been mentioned in these forums, corrupt Fonts can cause this error as can permissions.
The first thing I would do is open Disk Utility and run Repair Disk Permissions.
If the error continues after that has been performed, then look at your Font Book for duplicate fonts (marked with a dot). OS X loads fonts in an order based on the search path, the users library first, then the all users library and then the system library. You might have a case of your user font conflicting with other fonts, especially if you are using a font management utility.
Regards,
Paul

Error [DTM_10004] The DTM process terminated unexpectedly.

Good night friends,
I am using "informaticacloud" service (informaticacloud.com) to sync with my local database (Sql Server Express version). In SQL Server 2012, the informaticacloud agent works perfectly. Already in SQL Server Express 2008, tables are imported
normally. But when begins data insertion, nothing happens. Below the error.
[DTM_10004] The DTM process terminated unexpectedly.
Has anyone faced any similar problem?
Almost now I have found in informaticacloud website and found people with same problem. Below the link.
https://community.informatica.com/docs/DOC-1761
Thanks in advance.

Hi,
Here is a link for Troubleshooting: Common Error Messages
https://community.informatica.com/docs/DOC-1619
“[DTM_10004] The DTM process terminated unexpectedly.
This means that the engine could not accomplish the first step in your task. Generally, this indicates that your source file or database is unreadable by the engine (even though you could preview data). Check your source columns for spaces, dashes, or
special characters. It could also mean that a virus scanner, content filter, or proxy server is blocking agent access to the source.”
Meanwhile, this issue is related to informatica cloud. Please understand that we has the very limited resources about the third party program. For quick and accurate answers to your questions, it is recommended that you initial a new thread in the informatica
forum via the below link:
https://community.informatica.com/community/products/informatica_cloud
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Hope the issue will be resolved soon.
Tracy Cai
TechNet Community Support

The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255

Hello All
We have a server 2008 R2 HyperV server and during the last few months it started to reboot randomly.
Initially we thought its related to the issue fixed by the following hotfix so we applied it but even with the hotfix it still keeps rebooting.
http://support.microsoft.com/kb/2732595
Unlike what's mentioned in the hotfix , the faulting module is not "ntdll.dll" but "msvcrt.dll".Also came up with the following indication the reboots could be related to KB2871997 but that update is not installed
on this system.
Following are the events from system log.
Log Name:      System
Source:        LsaSrv
Date:          2/9/2015 11:58:12 PM
Event ID:      5000
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      HV2008-Host
Description:
The security package Kerberos generated an exception. The exception information is the data.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="LsaSrv" Guid="{199FE037-2B82-40A9-82AC-E1D46C792B99}" />
    <EventID>5000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-10T04:58:12.415529200Z" />
    <EventRecordID>8091130</EventRecordID>
    <Correlation />
    <Execution ProcessID="736" ThreadID="5888" />
    <Channel>System</Channel>
    <Computer>HV2008-Host</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="Package">Kerberos</Data>
    <Binary>050000C00000000000000000000000001111F6FEFE070000020000000000000000000000000000008EEB1802000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
Log Name:      System
Source:        USER32
Date:          2/9/2015 11:58:24 PM
Event ID:      1074
Task Category: None
Level:         Information
Keywords:      Classic
User:          SYSTEM
Computer:      HV2008-Host
Description:
The process wininit.exe has initiated the restart of computer HV2008-HOST on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="USER32" />
    <EventID Qualifiers="32768">1074</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-10T04:58:24.000000000Z" />
    <EventRecordID>8091132</EventRecordID>
    <Channel>System</Channel>
    <Computer>HV2008-Host</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data>wininit.exe</Data>
    <Data>HV2008-HOST</Data>
    <Data>No title for this reason could be found</Data>
    <Data>0x50006</Data>
    <Data>restart</Data>
    <Data>The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.</Data>
    <Data>
    </Data>
    <Binary>06000500000000000000000000000000000000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
Following are the events from Application logs.
Log Name:      Application
Source:        Application Error
Date:          2/9/2015 11:58:14 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      HV2008-Host
Description:
Faulting application name: lsass.exe, version: 6.1.7601.22653, time stamp: 0x534893ed
Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
Exception code: 0xc0000005
Fault offset: 0x0000000000001111
Faulting process id: 0x2e0
Faulting application start time: 0x01d03c91dbe5854f
Faulting application path: C:\Windows\system32\lsass.exe
Faulting module path: C:\Windows\system32\msvcrt.dll
Report Id: 6af0ff3d-b0e1-11e4-83ca-0026b9340d61
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-10T04:58:14.000000000Z" />
    <EventRecordID>267648</EventRecordID>
    <Channel>Application</Channel>
    <Computer>HV2008-Host</Computer>
    <Security />
</System>
<EventData>
    <Data>lsass.exe</Data>
    <Data>6.1.7601.22653</Data>
    <Data>534893ed</Data>
    <Data>msvcrt.dll</Data>
    <Data>7.0.7601.17744</Data>
    <Data>4eeb033f</Data>
    <Data>c0000005</Data>
    <Data>0000000000001111</Data>
    <Data>2e0</Data>
    <Data>01d03c91dbe5854f</Data>
    <Data>C:\Windows\system32\lsass.exe</Data>
    <Data>C:\Windows\system32\msvcrt.dll</Data>
    <Data>6af0ff3d-b0e1-11e4-83ca-0026b9340d61</Data>
</EventData>
</Event>
Log Name:      Application
Source:        Windows Error Reporting
Date:          2/9/2015 11:58:23 PM
Event ID:      1001
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      HV2008-Host
Description:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: lsass.exe
P2: 6.1.7601.22653
P3: 534893ed
P4: msvcrt.dll
P5: 7.0.7601.17744
P6: 4eeb033f
P7: c0000005
P8: 0000000000001111
P9:
P10:
Attached files:
C:\Windows\Temp\WER5001.tmp.appcompat.txt
C:\Windows\Temp\WER535C.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER53DA.tmp.hdmp
C:\Windows\Temp\WER6690.tmp.mdmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_3c1aa5eeba75bf26fcebc4f54e714efe7b5162a2_cab_20a56871
Analysis symbol:
Rechecking for solution: 0
Report Id: 6af0ff3d-b0e1-11e4-83ca-0026b9340d61
Report Status: 0
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Error Reporting" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-10T04:58:23.000000000Z" />
    <EventRecordID>267650</EventRecordID>
    <Channel>Application</Channel>
    <Computer>HV2008-Host</Computer>
    <Security />
</System>
<EventData>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>APPCRASH</Data>
    <Data>Not available</Data>
    <Data>0</Data>
    <Data>lsass.exe</Data>
    <Data>6.1.7601.22653</Data>
    <Data>534893ed</Data>
    <Data>msvcrt.dll</Data>
    <Data>7.0.7601.17744</Data>
    <Data>4eeb033f</Data>
    <Data>c0000005</Data>
    <Data>0000000000001111</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
C:\Windows\Temp\WER5001.tmp.appcompat.txt
C:\Windows\Temp\WER535C.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER53DA.tmp.hdmp
C:\Windows\Temp\WER6690.tmp.mdmp</Data>
    <Data>C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_3c1aa5eeba75bf26fcebc4f54e714efe7b5162a2_cab_20a56871</Data>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>6af0ff3d-b0e1-11e4-83ca-0026b9340d61</Data>
    <Data>0</Data>
</EventData>
</Event>
Log Name:      Application
Source:        Windows Error Reporting
Date:          2/9/2015 11:58:22 PM
Event ID:      1001
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      HV2008-Host
Description:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: lsass.exe
P2: 6.1.7601.22653
P3: 534893ed
P4: msvcrt.dll
P5: 7.0.7601.17744
P6: 4eeb033f
P7: c0000005
P8: 0000000000001111
P9:
P10:
Attached files:
C:\Windows\Temp\WER5001.tmp.appcompat.txt
C:\Windows\Temp\WER535C.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER53DA.tmp.hdmp
C:\Windows\Temp\WER6690.tmp.mdmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_3c1aa5eeba75bf26fcebc4f54e714efe7b5162a2_cab_20a56871
Analysis symbol:
Rechecking for solution: 0
Report Id: 6af0ff3d-b0e1-11e4-83ca-0026b9340d61
Report Status: 4
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Error Reporting" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-10T04:58:22.000000000Z" />
    <EventRecordID>267649</EventRecordID>
    <Channel>Application</Channel>
    <Computer>HV2008-Host</Computer>
    <Security />
</System>
<EventData>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>APPCRASH</Data>
    <Data>Not available</Data>
    <Data>0</Data>
    <Data>lsass.exe</Data>
    <Data>6.1.7601.22653</Data>
    <Data>534893ed</Data>
    <Data>msvcrt.dll</Data>
    <Data>7.0.7601.17744</Data>
    <Data>4eeb033f</Data>
    <Data>c0000005</Data>
    <Data>0000000000001111</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
C:\Windows\Temp\WER5001.tmp.appcompat.txt
C:\Windows\Temp\WER535C.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER53DA.tmp.hdmp
C:\Windows\Temp\WER6690.tmp.mdmp</Data>
    <Data>C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_3c1aa5eeba75bf26fcebc4f54e714efe7b5162a2_cab_20a56871</Data>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>6af0ff3d-b0e1-11e4-83ca-0026b9340d61</Data>
    <Data>4</Data>
</EventData>
</Event>
Would really appreciate if someone can point us to the correct direction on how to get this issue sorted.
Regards,
Dhanushka

Hi Sir,
Please try the following items:
1. if ther is anti-virus installed , please uninstall it temporarily
2. run " sfc /scannow "
3. keep windows up-to-date
4. if you updated some hardware driver please roll it back
5. if the issue persists , please use windows installation media to perform inplace-upgrade for the system
Also please refer to reinstall C++ runtime within the similar thread:
https://social.technet.microsoft.com/Forums/windows/en-US/bf69eeff-24c4-499f-b280-b6a3098f4f9f/problem-with-msvcrtdll-version-70760117744?forum=w7itprogeneral
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

DYNAMIC_CALL_FAILURE Error during proxy processing An exception with the ty

Hi,
SRM 7.0 contains 2 clients:
Sender: 100 for EBP, logical system is CLNT100
Receiver: 200 for SUS, logical system is CLNT200
both the clients are connected through PI 7.0, logical system of PI is CLNT001.
From SPROXY of 100EBP, i'm executing the outbound proxy, in moni sent msg success.
In PI also msg is processed.
But in SUS200, it is showing below error msg:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX_TRADING_PARTNER_SUS_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Pls help in resolving the same....
tnx n rgds,
balu

Hi,
How did you solve the issue? Can you please provide the solution.
Thanks,
-Devi Swain

Error during proxy processing An exception with the type CX_BBPX1_STD_MESSA

Hello,everyone!
My PI version is 7.11,SRM SUS version is 7.0,ECC version is 6.0 ,When I import XI SRM CONTEN,sending IDOC in ECC,there is a error some of the mesages:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX1_SUSPO_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Detialed error from SXMB_MONI,
Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner 0015111411 with type 'Vendor' I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076527 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line:
This issue only ocuured for partner 0015111411, but we tried with other partner ID and those messages are processed sucessfully and PO is created.
I have a doubt that, is there functionality in proxy to compare the country with partner in SRM system. Could please anyone help me one the same.
Regards,
Baskaran K

HI,
This is a standard proxy. I'm not sure how to debug the proxy with payload. Could you please tell me the steps.
We have one more error message
<FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner XY91 with type 'Sold-to Party' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076526 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
Is there any table to check these details like Sold-to Part, Vendor etc in SRM system?
Regards,
Baskaran K

Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB

Hi All,
I am facing the following problem in production server when even the file got processed successfully .
Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause The system tried to insert a data record, even though a data record with the same primary key already exists
Can you please suggest how it can be handled?
Regards,
Saras

You need to debug your proxy program and check all the insert statemrnts. Looks like there is an exception being thrown in the proxy (may be after the completion logic to push the data in to db) which is not being caught.
Proxies are object oriented and it is a good practice to implement Exception Handling mechanism.
VJ

How to solve the error " The installation process encountered an error while installing Shared Technologies.

I had bought the adobe photoshop elements 12 online and I am not able to complete my installation although i tried many times . An error "The installation process encountered an error while installing Shared Technologies. Please restart your computer and try again" occur

Photoshop Elements 12 fails while installing sh... | Adobe Community

I purchased Fifa13 from the App Store, downloaded it in my pc..,but whrn i am trying to install it in my iad frpm the pc, i couldnt do it. The installation process stops after some time and the ipad shows some thing like "can sync..,failed to install fifa

I purchased Fifa13 from the App Store, downloaded it in my pc..,but when i am trying to install it in my ipad frpm the pc, i couldnt do it. The installation process stops after some time and the ipad shows some thing like "can sync..,failed to install fifa13"
What can i do?
btw....,its happeniing only wth the fifa13, installed other apps from pc previously.

anybody answer me fast

Network printer error: the 'ipp' process stopped unexpectedly with status 1

Similar Messages

Maybe you are looking for