Network Printer  Install in SAP

I have one network printer hp2200n & Its IP is 192.168.1.1.
How can I install this printer in my SAP.I have install sap  4.7C on Windows 2000 advanced server with SQL 2000 data base.
please provide me procedure  step by step.
Thanks & regards
jagdish kumar

Hi,
do following,
download sapsprint.exe from service .sap.com  (Note 927074 - Patches for SAPSprint)
install it on your network server where network printer is attached.
now in sap follow the steps,
tcode  ->   spad -> configuration -> output devices -> change (F8) -> create
output device ->  give name of printer i.e HP_printer
short name -> HPP
device type -> select your printer driver i.e HPLJ1100
device class -> standard printer
select tab access method
Host Spool Access Method ->  S
Host printer :  __DEFAULT
Destination host:   ip address of host where sapsprint is installed
now in su01 for every user assign this printer ( use SU10 for mass change)
regards,
kaushal

Similar Messages

  • Automatic Network Printer Installed for clients

    Dear All,
    Is there any possible ways that if every clients can get Automatic Share printer installed on machine that they current log on?
    We have Windows Server 2008 R2 as our Domain Controller.
    Please help.
    Best Regards,
    VeasnaYim

    Hi,
    According to your description, my understanding is that you want the network printers to be automatically added on the client machine.
    You may reference the link below for Deploying Printers by Using Group Policy：
    https://technet.microsoft.com/en-us/library/cc754699.aspx
    And, more information about the policies specific to managing printers and how to enable or disable printer management by using the Local Group Policy Editor, reference:
    https://support.microsoft.com/en-us/kb/234270?wa=wsignin1.0
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Illustrator CS2 can't open new file with network printer installed

    It seems that with my network printer set up I can't do much with Illustrator, I can't open new files and I can't print without opening up the printer setup menu in Windows.
    Photoshop CS btw, I can't open it at all.
    I take the network printer offline and everything is fine, except then I don't have a printer.
    Windows XP SP2
    Illustrator CS2 12.0.1
    Any fix for this?
    Thanks,
    David

    Creating a Dummy Generic printer fixed the issues of opening a new file in Illustrator and being able to open PS at all.
    However Illustrator is still taking several minutes to print something as simple as a test circle.
    The menu I was referring to is Printers & Faxes under control panel, though I realized later that may not have had anything to do with it. It may have simply been coincidental timing. I opened the P&F window about 10 minutes after hitting print and just after opening P&F the print window popped up. It simply may have been taking 10 minutes for the print window to open.
    With the network printer set up as the default printer if I try to open Photoshop a window opens but just stays a grey blank screen, no credits box, nothing. Then if after a few minutes I hit ctrl+alt+del it says Photoshop not responding.
    What I was doing to take the printer offline was to completely delete the network printer from Printers & Faxes.
    I'll see if they have an updated set of drivers, but I think I have the latest ones, as I updated them a month or so ago.
    Thanks,
    David

  • HP 2542 can not get network printing installed

    Computer
    System Manufacturer: Hewlett-Packard
    System Model: HP Pavilion g7 Notebook PC
    OS Name: Microsoft Windows 7 Home Premium
    OS Version: 6.1.7601 Service Pack 1 Build 7601
    Installed Physical Memory (RAM) 4.00 GB
    System Type: x64-based PC
    Printer
    Product Name HP Deskjet 2540 All-in-One Printer series
    Product Model Number
    A9U27A 
    Firmware Version CBP1FN1333AR
    I am trying to install this printer but I always end up in same place.
    The install always stops wih the error "The Printer and the Computer are Connected to Different Networks"
    The IP address of the computer is 192.168.1.93
    The IP address of the printer is 192.168.1.94
    My home network is conneted to the Internet via a AT&T Uverse. The gatway is 192.168.1.254.
    The DNS is also at 192.168.1.254.
    I can ping the printer from the computer at 192.168.1.93 
    I can access the printer via the web at 92.168.1.94 wih the usb cabel disconnected
    Because I am at the max limit of the U-verse 2Wire box range I have installed a NetGear WiFi extender model WN2000RPT as an extender only, no DHCP or other features.
    The configuration has supported other printers and the installing computer is connected via WiFi. I also  have another computer at this same site that connects via WiFi.

    Hi cramafab,
    Welcome to the HP Forums.
    I suggest you attempt the steps that are listed in the following document for Setting Up the Printer for a Wireless network for the HP Deskjet 2540 and HP Deskjet Ink Advantage 2....
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Desperately need help with a networked printer and SMB sharing for windows

    Complete xServ newbie here. I'm a windows/novell admin, with limited experience in Unix and Linux.
    Against my advice, a client of mine that owns a small office of 20 people bought an XServG5 to act as a server for 20 mixed Windows PCs. File sharing services are working fine. I've created the users, set up groups and rights - that's all good.
    I cannot get an SMB shared printer to work from the windows machines. They run through the network printer install just fine, it shows up online, etc. However, when print jobs are submitted they DO show up in the printer queue on the server, sit there for a while, and then get moved to the completed box.
    They never print. There's not any indication that the job is even submitted to the printer. I can print to the printer just fine from the server itself, but the windows clients don't work, but they don't return an error message.
    Print services are running on the server, I've configured the printer name to be less than 12 characters for the share, and indeed it does pop right up during the "add network printer" routine.
    Ideas? I'm not even sure what questions I'm supposed to be asking, such is my ignorance of the OS. I do know that I followed the documentation to a T, and according to Apple this should work.
    Thanks in advance for the help. I'm extremely frustrated.

    We have the same problem. Our printer worked for about 2 years but failed similar to yours after a system update.
    Can you go into the Windows service, Logs, Printer Service. Copy and paste the log here. What I am looking for is a line like lpr: CANNOTCONNECTCLIENT or something similar to this.
    What I expect is that you have a problem where the cups defined printer is not usable. We can't get our problem fixed either - but am just curious if you have the same thing. We reloaded our server, applied all of the update and still cannot get it to work.
    Again, I think it stems from the update.

  • FileOutputStream to Network Printer

    Can anyone tell me how to specify a network printer (installed on server) in the FileOutputStream. I've tried the below and many other variations including the IP address, the port number, the name, etc. The API documentation did not help. Thanks.
    new FileOutputStream("\\\\localhost\\PrinterName");

    Ian,
    I did try to go learn something, but you're not much help either. I was using LPT1 as the argument to successfully print on my local printer and this is not a "file". Taking that a step further, I found the below post which led me to believe this could be possible with a network printer that's installed on the server. If you want to complain, take it up with "innphernoe".
    That said, I prefer to use the 2D printing and have read many poor tutorials to consoldate what I need to print text. I've now have general printing from my server working, but the print method in my print class in the JSP declaration section can not access my bean. Any suggestions on approaches to that?
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Author: innphernoe
    In Reply To: Re: Printing.. Apr 7, 2002 3:54 AM
    Reply 4 of 28
    how to i get the page the jsp page to refresh every
    10 seconds..
    <meta http-equiv="refresh" content="2;url=something.html">
    well u also said that i must set my FileOutputStream
    to the network printer....how do i do that...
    Thanx..Something like this:
    FileOutputStream fos = new FileOutputStream("\\\\localhost\\network_printer_name"); PrintStream ps = new PrintStream(fos); ps.print("Print this line"); ps.close( );
    You would also have to have a try block for your I/O code snippet, or you could just throw IOException.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  • Configure Network Printer in SAP

    Hie Guru
    I have been able to configure a network printer that is connected to a PC using Access method S and installing SAPSPRINT on the printserver. I'm now faced with a challenge on configuring a stand alone network printer. I would like to kno w that since this Ptinter is not connected to any PC were do i install SAPSPRINT. I'm also not very sure if the entries i made in Tcode SPAD are correct.
              Access Method: U 
              Host printer: <name of printer>
              Destination Host: <IP Address of the Network Printer>
    Please any suggestions are welcome!
    Regards

    Hi
    It's realy tough to list all steps require to configure printer. So please go through below links and follow the instructions.
    Please note, it's only informative references thus you require to take the right dicesion.
    http://help.sap.com/saphelp_nw70/helpdata/en/d9/4a956151ea11d189570000e829fbbd/frameset.htm
    http://www.oit.state.pa.us/ob_imaginepa/lib/ob_imaginepa/sap_support/sapprintguide.doc#Ai
    Regards
    Sekhar

  • Acrobat Reader 8.1.2 network print issue after installing XP SP3

    I administer a network of 30+ workstations, and since installing Acrobat 8.1.2 and Windows XP Service Pack 3, I've been experiencing odd behavior from the print function in the reader.
    Staff can open a pdf document with no issues, but when they try to print to a network printer, nothing happens. I then in turn open wordpad on their workstation, do a "File, Print", and the print functions properly.
    I then can go back to the reader, and the print job will work.
    Nothing has changed on my network in regards to previous settings, with the exception of installing reader 8.1.2, and XP SP3.
    Any ideas, or potential solutions?

    You are not alone. I hope you get some response. We have seen nor heard anything.
    See: http://www.adobeforums.com/webx/?13@@.59b56569/6
    Title: Adobe Reader v8.1.2 Compatible with Windows XP Pro SP3
    One ray of hope is that it seems to be getting quicker. I don't know why but I'll take it!
    When I go to this Windows XP link,
    http://www.microsoft.com/windows/products/windowsxp/default.mspx
    it says I am running SP2 instead of saying I am running SP3, which is what my System Properties says is installed. Just something to think about and perhaps check.
    Good luck!

  • Hp laserjet 1022n printer from network not installing on windows 7 64 bit

    lj 1022n printer not installing on win 7 64bit as network printer. I have tried to inst. upd64bit driver but failure.

    Hi,
    Please update the printer driver with correct version and compatible with Windows version.
    Then Open "Devices and Printers" and right click on "Printing Prefences"
    Create new Printing Shotcuts as below.
    Then go to the other tab Finishing and do exactly like the image.
    Apply and Save.
    Your Booklet printing and shotcuts is ready. now you can print.
    Please let me know if this is being useful for you.

  • LaserJet 2550n network printer on XP host PC, can't install Windows 7 client laptop

    Have Color LaserJet 2550n network printer connected to XP host PC. I can't install  Windows 7 client laptop for printer. The wireless network is fine, I can access documents back and forth, merely the printer doesn't work and there's no way to download 64bit drivers for this printer from HP. 

    Resolved, not solved. 
    I talked to HP product support. The Officejet Pro 8500 A910 will not install on Windows XP (at least the Home Edition) when networked through a router. It will install through USB. I uninstalled the program and reinstalled it with only USB connected to clean out all the network printer/scanner information. Product support claimed it would install through an ether net cable connected between the printer and computer but this does little good if you need internet access.

  • Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC.

    Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC. According to Microsoft Windows Compatibility Center website (http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...) this printer is compatible.
    I have tried everythingto no avail. HP will not support and have, very little online resources addressing this particular issue. What should I do?

    This may help: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02538616&lang=en&cc=us
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How to install All-In-One software with network printer?

    I plugged my 7310xi into my Linksys WRT54G router. In Windows 7 64-bit I found the printer, installed the default drivers, and it's printing happily via the network.
    But I need to install the HP All-In-One software if I want more advanced functions like scanning to my computer. 
    Downloaded the software from the web. During installation I get to the part where it asks me to choose how the printer connects to the computer. I select "through the network," click next,and it just keeps on kicking me back to this screen and I can't proceed. Any ideas?
    Here's the error:
    Now Launching=X:\hpzdui40.exe -I XXX -f X:\DIVins??.DAT
    fail to load library X:\hpzscb01.dll
    CNetworkUIPlugInApp::InitInstance fail to initialize sacabod. Result = o;
    GetLastError = 193
    RUN: Driver UI Plug-In exits returning 50
    Exit code=50
    I've set it to run in Vista compatibility mode and Run as Admin.
    Message Edited by fuzzybabybunny on 08-06-2009 11:59 AM

    I had exactly the same problem with Windows 7 64-bit and HP Photosmart 2610xi. All you need to do is right click on the installation program, go to properties, go to compatibility mode, select Windows Vista SP2 and optionally check run as administrator. It worked after that.

  • Installati​on error 0x00004005 when installing aHP 1220c network printer on a win 7 - 64 bit

    I am attempting to install an HP 1220c printer on my new Win 7-64 laptop. The laptop finds the printer connected to a desktop XP computer automatically when I click "Add New Network Printer" but the installation fails with error 0x00004005. If I connect the printer via a USB cable directly to the new laptop, it installs OK.
    After the USB install went OK, I replugged the printer into the XP desktop and tried again. I got the same error message even though the laptop found the printer on the desktop automatically.
    LuAnn

    Hi Bob,
    Thank you for your reply.
    Yes I have tried the CS5 Cleanup Tool - multiple times.  Doesn't help.
    I am surprised to hear that you installed with no problems in light of Tech Support being adament that it won't work on Windows 7 and is not supported.
    I told Tech that I didn't accept that as there are probably hundreds of thousands of users with CS3 who have installed or tried to install on a Win7 machine and not everyone has hundreds of dollars spare to upgrade.
    I only really use DW, PS and Acrobat in the Suite so I'm going to have to save to buy those products but it won't be anytime soon.
    Thanks.
    Sarah

  • Can't install network printer.. Drivers won't install

    I am currently upgrading my Window XP pro machines to Windows 7 Ultimate "32 bit" I have software on the workstation that is VITAL to operation and no longer available for download and media is destroyed. I was successful in upgrading to Vista
    32 and upgrading to Windows 7 Ultimate. The updates all installed and I figured I was home free.. :Not so MUCH: When I try to install any network printer It errors out at point of installing the driver. I am only having this issue on upgrades to Window 7 Ultimate.
    On Machines I only upgraded to Window 7 Professional, the printer install fine.  I am receiving the same error on any printer of any manufacturer, HP, Ricoh ,Canon..... 0x00000f0d...etc.  I have cleaned out the printer and drivers, stopped and
    started print spooler, and am running out of options.
    Thanks in advance

    Hi，
    What is the detailed information of the error message?
    I suggest you install the driver in a compatibility mode, see instructions in the following link
    http://social.technet.microsoft.com/Forums/windows/en-US/80cae5ee-dc98-4a2f-8284-a1ab826059b7/how-to-install-a-hardware-device-driver-using-compatibility-mode
    And it is recommended to view the manufacture website or contact the printer manufacture to check if they have a appropriate printer for Window 7 Ultimate.
    Yolanda Zhu
    TechNet Community Support

  • Can anyone tell me how to install a network printer driver without having the network printer online?

    Can anyone tell me how to install a network printer driver without having the network printer online? It doesn't matter what manufactors make the network printers. Is a netwaork printer(with network card) has to have that printer on line to be able to install
    the driver? This is the point of my question!
    I've ask a same type of question previously, but I can't either get good answer nor reply on the response.

    DP
    The computer (and driver) have to handshake with the printer, QED it has to be either online or physically connected and if it is physically connected it wont work on the network so yes it does.
    Wanikiya and Dyami--Team Zigzag

Maybe you are looking for