Network printer no longer printing double sided

I've recently set up my airport extreme (AE) base station in bridge mode with my Verizon fios wireless router. I also have an airport express connected to a Brother laser printer via USB. The AE is getting ip addresses from the Verizon router, and I have not yet turned off any wireless signals, so both routers are sending out a signal. In this configuration, I can still send print jobs to my laser printer fine, but the printer no longer prints double sided even when the print settings are set to do so. I've also noticed that I can no longer see the printer status when I open up the specific printer app. for that printer. All of this was possible over my wireless network when I was running a simple cable modem to the AE and the AE was the only router in the house. Could this problem be caused by having two wireless antennas running at the same time or does this sound like another problem?

To try... set a different printer as the default, and have the network printer as non-default selection
Some other reading
Printer is Crash Problem http://forums.adobe.com/thread/720864?tstart=0

Similar Messages

Can I print an ALV in double-sided?

Hi!
Can I print an ALV in double-sided on the page?
Thanks very much!

Hi,
the function has parameter IS_PRINT which is a reference to SLIS_PRINT_ALV, which in time has, among others, structure PRI_PARAMS. Some of the many fields that the structure has are PDEST, LINCT, LINSZ and PAART, which can help to determine the output device and format.
As previously stated, your printer must be able to print double-sided and it must be recorded as output device in SAP (trans. SPAD). If you don´t understand this point, never mind since it is more as task for system admin. than for a programmer.
When creating the output device (device class = Standard printer), there´s folder Output Attributes which has field Print Mode. The options for this field are Default, Simplex, Duplex and Tumble Duplex. So, entry duplex does what you pretend.

My Photosmart printer no longer prints with my iPad or iphone.

My Photosmart printer no longer prints with my iPad or iphone. I have reinstalled both Apps but although they recognise the printer , no printing ensues. The printer is still printing wirelssly with my PC.
Thanks any helpers out there

...not sure which of the three possible apps you have, but here is the go-to place to troubleshoot any issues with them http://www8.hp.com/ca/en/support-topics/mobile-printing/mobile-print-help-iphone-ipad.html
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Changed cartridge and printer no longer prints from pc

Changed cartridge and printer no longer prints from pc, as if it is no longer connected

Please read this post then provide some details. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? Are there any error messages on the printer or computer screen? If you are using Windows running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.

Print each page range double sided as new task

Hi All,
I have that problem. I would like to double sided print some pages from pdf file - let's say pages 1 to 5. But I want them to print like this - pages 1-2 on the first sheet of paper, page 3 on the second sheet (the other side of this sheet I want to be blank) and pages 4-5 on the third sheet.
If I type page ranges 1-3,4-5 when printing the result will be the same if I would type page range 1-5, so pages 1-2 will print on first sheet, pages 3-4 on the second sheet and page 5 on the third sheet. That's not what I want.
The only solution is to first print pages 1-3 and then open printing dialog box again and print pages 4-5 so they would be two separate tasks for printer. But this is very time consuming when working with large files.
I do not have Adobe Acrobat to insert blank page after each section that is odd numbered so this is no solution for me.
Could you please help? Any ideas how to work this out? Is there any printing set up to print each page range as separate task?
Or maybe there is a way to double sided print odd numbered page ranges with an additional blank page at the end so that the next range would start on new sheet?
Thank you in adavnce

dear ,
check ur printer settings , bcos u are using std.program , so i cannt say SAP is doing wrong , better to check ur printer settings
Regards
prabhu

Print A4 as A5 (double sided)?

Hi
I've got a document with two A4 artboards, which I'm printing double sided on one sheet of paper. Could anyone tell me the easiest way to print it at A5 size, so I'll get two double sided copies per A4 pages?
Thanks!

Make a pdf and print this from Acrobat. Acrobat has an option to print multiple pages per sheet, under page scaling. I do this all the time for printing manuals and brand standard guides, so I can fit them in my binder with less pages.
For the double sided I cannot answer as every print driver has that menu in a different location. First make sure your hardware is capable of printing double sided, so you dont spend time looking for somehting your printer cannto do. If you have a fiery look for page setup >>fiery options >> double sided or possibly buried somewhere else(pends on your fiery verison/PPD) buried in your print options.

HP Photosmart 5520 printer no longer prints wireless

Hello.
I recently got an xfinity cable modem with wireless. (Xfinity/comcast promoted it should be faster...I am seriously doubthing that!)
Before this cable modem, I was printing okay with a Netgear router. Never an issue with it. Now with the comcast modem with the Netgear router, I can no longer print wirelessly from my computer or anywhere remotely (ipad, laptop, etc).
I do suspect something with the comcast modem but comcast claims it is NOT them (Yeah, right...works okay flawlessly before and now nothing). Thus if someone can help me pinpoint where the problem lies, I would be greatly appreciated. And of course, one cannot turn off the wireless network in the xfinity modem either!!
Have tried the HP diagnosics but says it cannot establish a 2 way communication. Everything on the printer display looks correct from a wireless standpoint (i.e. sees the router name, etc).
I am using Windows Vista
Thanks!
Thomas

What Comcast forced on you is a Gateway device, modem+router. Call comcast and have them put that Gateway in Full Bridge mode and now connect your router back up and use that. What is the exact Comcast model number they gave you?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP PhotoSmart C309g Printer no longer prints Black Text, Graphics, etc

Hi:
We have an HP laptop.
We have an HP PhotoSmart All-In-One C309g Wireless printer/scanner/copier.
It has been working fine for a couple of years, until 2 days ago.
It will no longer print anything in black (colors and Photo Black work fine).
We have taken it apart...removed all ink cartridges, removed the cartridge caddy,
cleaned all electrodes, replaced the caddy, installed 5 (all) new cartridges,, etc.
We went through the process of removing the cartridges, caddy, shutting down,
removing the AC cord, waiting for several minutes, then doing the reverse process.
When we turn the printer on, it does its auto-check/install, and after about 4-5 minutes
tells us that the installation failed, the to press the OK button.
We went thorugh this process several times, and the installation failed every time.
In the past, installing printer cartridges, cleaning, calibrating...executed quickly.
The printer will not print anything that is Black, whether it me a print from Word, Notepad,
doing a direct copy from the glass, etc....both, with the laptop On or Off, but it will not
print anything in standard Black.
The colors and Photo Black print fine, but the regular Black does not.
The output from the other 4 cartridges are sharp, crisp, etc.
Anything... text, graphics, etc., in standard Black does not print.
Any ideas.
Thank you
-DaleBr
This question was solved.
View Solution.

The troubleshooting steps in this document may help resolve the issue of black not printing. If not see the post here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printer no longer prints in black only

My printer just stopped printing in black. Loaded a fresh blank ink cartridge and when it prints the allingment page there is no blank ink. Tried everything that HP doctor has as far as remedies and cleaning. It will not print black ink anymore. Is it time to get a new printer?

my printer is printing in blue only, why?

HP printer no longer prints Pages docs

My HP deskjet 5650 printer suddenly stopped printing Pages documents this afternoon after completing only 8 pages of a 10 page run. The printer does, however, print from other programs such as Preview, my Mac mail program, Appleworks, etc. So this problem seems specifically related to Pages. I uninstalled the drivers and reinstalled HP driver V 3.3.3 (Universal Binary), as the Software Update recommends. This still does not solve the problem. I've rebooted and turned the printer on and off, and even installed HP driver version 2.7.1 which is specifically for the Max OS X, but nothing seems to work. Any solutions?

It turns out that my HP printer DOES reproduce Pages '08 documents imported from Appleworks, but for some reason, it will not print 2 pages of the 10 page document I was trying to print. I looked at the embedded marks and other aspects of the document, but cannot find anything that makes them different and unprintable in Pages.

HP C7280 all-in-one duplex printing problem - Long and short sided binding!

I use a HP 7280 all-in-one printer and have the duplexer attached. Up to installing snow leopard I have been able to print two sided documents from ipages no problems. But now every time I try to print a two sided document in flips the second side vertically (basically meaning it is binding is always long edge). When I change the setting from long edge binding to short side it makes no difference at all!!! I know this used to work, but it appears snow leopard changed that!! Any suggestion to fix the problem, thanks

One of the common issues with automatic duplexing, is the requirement of increased margins due to the way that the process works. It is not a defect, it is simply the way that the process needs to ensure print quality when auto duplexing. In contrast, manual duplexing does not have the same needs, as it draws directly from the tray. From testing of other brands, I can say that I have seen the margin issue occur with other manufacturers as well. Seems to be a necessary evil when auto duplexing.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Print pay-slip on double-sided

Hello,
We would like to print pay-slip on both side mode (we use ABAP list with report RPCEDTF0).
The print is Ok but the problem is that, on the same page, there are pay data for an employee on the side and pay data for an other employee on the other side.
My question is : how to do to add a jump (new page) after each employee ?
Is it a standard option and how to implement it (ABAP, form) ?
Examples could be help me.
Thanks in advance for your answer.
Daniel.

dear ,
check ur printer settings , bcos u are using std.program , so i cannt say SAP is doing wrong , better to check ur printer settings
Regards
prabhu

Epson SP2200 printer no longer printing with Snow Leopard 10.6.1

Quite a few users of Epson's SP2200 printer found they may have an expensive brick on their hands after upgrading to Snow Leopard 10.6.1. I was among those who thought my trusty printer was now useless, along with over $200.00 worth of ink supplies. I tried everything, nothing produced any results, Then I had an epiphany. My SP2200 was connected to my iMac via a Firewire connection. Firewire has been slowly phased out in favour of USB2, could that be the problem?. After downloading the SP2200 print driver from Epson's supported printers, I connected a USB cable between my iMac and Epson printer, and selected "System preferences" > Printers & fax> unlocked the app >selected the + sign to add a printer and "viola" there displayed in the printers window was the "Epson" Stylus Photo 2200 printer icon. I eagerly added it to my printer list. This was too easy; still not convinced I had succeeded, I tried printing a photo from my iPhoto library. After a few moments, I heard the sweet sound of my printer come to life, and shortly after that, a printed picture emerged.

Hi TDCP - welcome to the forums.
Printer drivers have taken a hit with SL.
Unless you know for certain that your current drivers are fully compatible with SL, you may need to look for updates in that regard. Same goes for your Adobe products.
Anything in CUPS that helps?
http://localhost:631

My Brother printer no longer prints after downloading 10.8

Loads the print App but nothing happens

I did notice Apple appears to have released an update specifically for Brothers Printers following the release for 10.8...
I don't know if this will help with your problem, but in the event you haven't installed it yet, try choosing software update from the Apple menu to see if it comes up...
I have a Brothers printer myself but have not tried to use it since updating...

HP PSC 1610 - printer no longer prints although it goes through the motions

Printer receives command to print and the paper feed engages. However the page is blanh whether it is a test page, a document, or a report. Checked both caetridges adn the ink is ine. Tried aligning the cartridges but an error message was displayed. I have no ida what next to try. Any help would be appreciated

The troubleshooting steps in this document may help resolve the issue of black not printing. If not see the post here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Network printer no longer printing double sided

Similar Messages

Maybe you are looking for