Network Printer not recognized by install software and won't print

I have a C5180 All-in-one printer hooked up to a wireless modem from my DSL provider. That modem is hooked up to my desktop directly and my notebook via the network. I had trouble with it this morning in that when I tried to print something the screen on the printer would say printing, but nothing would print. I tried a bunch of different things and ended up reinstalling the software via the HP website.
The software is installed, but it cannot find the printer on the network to add it to the computer. My notebook which I have not done anything with also does not print to the printer. Although the printer does say printing when new items are selected to print, yet nothing ends up printing.
Any suggestions?

I have also tried to use HP Print and Scan Doctor and it cannot find the printer on the network. I try copying using the scan bed of the printer and it won't print. It also won't scan because it says the program isn't fully installed.

Similar Messages

Photoshop Elements 13: The product you are trying to install is not an Adobe Genuine Software and appears to be counterfeit.

Installed Photoshop Elements 13 on old computer in December, old computer crashed this week so had to purchase new computer. Attempted to install and received the following error message: The product you are trying to install is not an Adobe Genuine Software and appears to be counterfeit. What now???

Try Warning: "Adobe Genuine Software Validation Failure..." | Windows

HT5304 Hi Guys, I'm running snow leopard 10.6.3 recently had update which left me with a DMSL launch problem. Rei installed software and now can't connect to Internet with cable or wifi ! can see network and router,. Help

Hi Guys, I'm running snow leopard 10.6.3 recently had update which left me with a DMSL launch problem. Re installed software and now can't connect to Internet with cable or wifi ! can see network and router. Have tried many things and now pulling my hair out !

recently had update
Care to share which update?
Have tried many things
Care to share?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.

USB 3.0 - WD Passport 1 GB not recognized by Windows 8 and 8.1

My USB 3.0 - WD Passport 1 GB not recognized by Windows 8 and 8.1. There is no sound when I plug it on pc or some error message. But other USB devices works well. Maybe there is not suitable drivers for this device? Please Help me!

Hi azeripatriot,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers.
For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that when you connect your passport drive it does not auto install. Does the power light on the passport drive come on? What is the error message you receive?
Have you checked for any Windows updates?
You can run The HP Support Assistant to help with resolving issues and looking for updates.
If you believe it is a driver issue, you can download the software and drivers from the WD website. Here is the link WD download for passport drives. If you connect it to a different computer, does it install? They also have a diagnostic tool for testing the drives. Here is a link to their diagnostic tool .Western Digital Data Lifeguard diagnostics for Windows.
If this has not alleviated the issue, would you please provide your exact model of computer and the operating system you are running. How Do I Find My Model Number or Product Number?
Would you also provide the exact error you get when connecting the passport.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Mac App Store not recognizing previously installed Apple applications

Mac App Store is not recognizing previously installed Apple applications (Aperture 3; iLife'11; iWorks'09) as already purchased and installed. These were installed either via download from the Apple Store or from install discs. Prior to the 10.6.7 update, at least some of these applications were recognized as already installed by the Mac App Store. This is no longer the case.

However, it now says that the software that came with my Mac Book Air (iLife) and other software must be re-purchased!
No, it doesn't say you must re-purchase them. You can continue to use those apps as they are. There is no requirement for you to re-purchase them. If you wish to have lifetime updates, you can purchase the version on the app store which will give you that. However, you still have the same license to use those bundled apps the same as everyone else.
This is wrong, at least for the Mac Book Air 2010 and forward purchases because of Mr Jobs announcement back in October.
What did he say that makes you think that?
No! Apple must make good on this. Why should Apple give me iLife with an MBA and tell me that I'm getting an App Store and then deny those software to be excluded from being "installed"? This is wrong.
No, you are wrong. You received the standard bundled apps that were bundled with every other Mac. The App store only reports on apps actually purchased from the app store (apparently correctly, now). Your bundled apps were not purchased from the Mac App Store. They were bundled with your Mac.
Apple reps (you guys here)
They are not, at least the ones you wish to talk to.
MUST escalate this issue for computers/software purchased from that October announcement and understanding.
Why? You didn't buy a "Mac App Store" bundle with your Mac. As I explained above, you received applications bundled with your Mac. They still work. You have not been cheated in any way.

My ipod is not recognized by my itunes and tells me to uninstall itunes and reinstall. will this erase all of my music?

my ipod is not recognized by my itunes and tells me to uninstall itunes and reinstall it. will this erase all of my music?

Hi braddyloopy,
Thanks for visiting Apple Support Communities.
If you need to uninstall and reinstall iTunes, your music files should not be erased or affected in any way. It is always a good idea to back up your data before making any changes to your computer, though.
If you'd like to locate your music, this article explains how to find the files:
Where are my iTunes files located?
http://support.apple.com/kb/HT1391
When you reinstall iTunes, I'd recommend using the method in this article to make sure it's reinstalled completely:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
Jeremy

My new ipod nano is not recognized by my itunes and I have tried the trouble shooting tips

my new ipod nano is not recognized by my itunes and I have tried the trouble shooting tips

This came from another thread, but worked for me. Problem is with newest iTunes 4.62 and Windows 8.1. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.

New iPod not recognized in Vista PC and no devices in iTunes

Hello, plugged iPod Touch into computer and Vista showed usual little box which said automatically located drivers and installed them. But couldn't find iPod in My computer. Installed iTunes from download area. No devices in left column.
Reinstalled iTunes from fresh download. Plugged iPod in every USB point on computer, but nothing happens. IPod not found or recognized.
Tried to find USB driver in Device Manager but all have generic names and so can't identify which driver was installed for iPod. None show installation date or anything which may identify which one. Also forgot to create restore point first (kicking self - always do this normally before installing something new).
Been through Apple help pages and tried all their ideas including reinstalling. Still nothing found.
Could someone please suggest what to do, besides dropping computer out of window?
Many thanks
Phil Chave

I would try this:
http://support.apple.com/kb/TS1369
(iPod not recognized in 'My Computer' and in iTunes for Windows)

NOT SHOWING FACTORY INSTALLED SOFTWARES IN " RECOVERY MANAGER "

I'VE TRIED TO REINSTALL SOME SOFTWARE PROGMS BY USING " RECOVERY MANAGER ".
BUT I DIDNT FIND ANY FACTORY INSTALLED SOFTWARE PROGRAMS.
PLZ ASSIST ME.
I WILL BE WAITING FOR UR KIND REPLY.
THANK U SO MUCH.

That is odd - that is, as long as the integrity of the Recovery Manager is intact, I would expect it to work.
For example,
If you have reinstalled the system using other than the Recovery Manager,
or if you have upgraded the Operating System,
or added / Removed data from the Recovery Partition,
OR if the Recovery Manager is corrupted in some way,
then
the Recovery Manager will either not work at all, or may at least show inconsistancies.
======================================================================================
You might try using a Restore Point to "go back in time" and see if the setting can recover.
Using Microsoft System Restore (Windows 8)
HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
You can go to your system's website for the current Drivers and Software that are available for your computer.
First, create a place to which you can return in case things do not work as you hope:
Create a restore point
Install Software and Drivers from HP Website
Go to the top of the HP forum page to Support and Drivers
If prompted, Enter your Country or Region and
Enter your Computer Model information,
Go to Software and Drivers...
Enter your Operating System in the Drop-down menu... Scroll down
Select desired Category Software – Solutions >> Driver - Keyboard, Mouse and Input Devices
NOTE: Download ONLY the relevant drivers and software for YOUR hardware - note that in the website you might find more than one kind of driver for more than one model of computer -- this is normal, but it does not mean YOUR computer uses all the software offered.
Expand and decide if you need to install that package.
Assure that you download and install only the most recent versions of each driver or program.
Save the appropriate *.exe installation package on your computer
NOTE the name and the location - the *.exe file will likely save to "Downloads “
Install the Software / Driver installation package: If you have ‘Admin’ control, you may highlight the package(s) and “double-click” to install, else Right-Click, Select ‘run as Administrator’ and install.
NOTE: There is sometimes a lot of information at the computer’s website. Take a look at what’s available and bookmark the page for later reference.
======================================================================================
Kind Regards,
Dragon-Fur

I am trying to install software and am getting the following prompt.Installation Failed, the installer cant create the folder "var/folders/sq/2fzf3s_d2bzb21159nbwkb2r0000gn/T//install.3732dq0ogT. How do I repair this

I am trying to install software and am getting the following prompt.
"Installation Failed, the installer cant create the folder "var/folders/sq/2fzf3s_d2bzb21159nbwkb2r0000gn/T//install.3732dq0ogT.
How do I repair this

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

IPod shuffle 4th generation is not charging, not recognized by my computer and laptop (Windows 7) and does not show up in iTunes

I have done all the troubleshoots and reset functions but my iPod shuffle is still not working. Every time I plugged my iPod it only shows red light that lasts for about 3 seconds and will disappear after some time. I've been using the same computer and laptop back then, and it stopped working since the last week of October.

Hello Erickson Gudelano,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Best of luck,
Mario

IPod not recognized in 'My Computer' and in iTunes for Windows 7

I have stopped the services to the ipod and mobile devices and restarted the services. I have uninstalled and reinstalled itunes. My ports are fine and I have tried all gthree ports. I also switched the cable and yet it's still not recognizing ipod. I also turned sync automatically off and then back on. Not sure what else to try. Very frustrating!!!! Need help!

Hey webbydebby
Try out the article below for more troubleshooting steps.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for using Apple Support Communities.
Regards,
-Norm G.

My iphone is not recognized by itune software?

My iphone is not recognized by itune software?

Using Windows? Follow the directions here:
http://support.apple.com/kb/ts1538

When i connect my ipod shuffle orange light blinks 4 times.. but after that it wont response.. it is not recognized by my computer and by i tunes as well.. after hours of charging it doesnt charge.. help me please????

helpwhen i connect my ipod shuffle orange light blinks 4 times.. but after that it wont response.. it is not recognized by my computer and by i tunes as well.. after hours of charging it doesnt charge.. help me please????

Even i have a same problem...

When i connect my ipod shuffle orange light blinks 4 times.. but after that it wont response.. it is not recognized by my computer and by i tunes as well.. after hours of charging it doesnt charge.. help me please???? iPod shuffle

helpwhen i connect my ipod shuffle orange light blinks 4 times.. but after that it wont response.. it is not recognized by my computer and by i tunes as well.. after hours of charging it doesnt charge.. help me please????
iPod shuffle

Even i have a same problem...

Network Printer not recognized by install software and won't print

Similar Messages

Maybe you are looking for