Network printer permanently 'paused'

I have a Brother HL-5350DN network printer on my home network and it works perfectly with my 2 x iMACs. I have recently acquired a MacBook Air and tried to install the driver but as soon as I try to print to it from the Air, the printer 'pauses'. Does anyone know what is causing this or a way around it?
All Macs are on the same (latest) version of Snow Leopard.
Regards
stindig

The printer pausing can be a result of the protocol you selected when creating the printer queue. On one iMac that is working, open Print & Fax, select the printer and then open Options & Supplies. Under the General tab will be the path used to connect to the printer (in the URL section). Make a note of this and then check the printer queue on the Air. If they are not the same then remove this queue and add the printer again.
If they are the same, then you try connecting the Air directly to the printer just to test that the installed driver does work.
Pahu

Similar Messages

  • Why won't my networked printer un pause after 10.6.8 update?

    I just downloaded and installed the latest 10.6.8 update. Since then every time I send a document to print it automatically pauses the printing and won't restart printing no matter what I do.
    I am working on a 3.2 GHz Intel Based 27" iMac. Our networked printer is a Konica Minolta Bizhub C552.
    This effects all printing no matter what the program is.
    I have removed the printer from the queue and added it back to no avail.

    Nevermind.
    I found a thread with a solution from Cnet and it worked perfectly. Back up and running.
    http://reviews.cnet.com/8301-13727_7-20074767-263/how-to-fix-printers-not-workin g-in-os-x-10.6.8/

  • Why is my network printer pausing now

    Since I upgraded to 10.9.1 (13B42) my network printer is pausing when I send a job to it.  i can print fine from the computer the printers is locally installed on.  But the sharing that printer no longer works.

    Is it being shared by another Mac or Windows?
    And which version of Mac or Windows is sharing the printer?

  • "paused for authentication" on a network print job?

    what do I do with "paused for authentication" on a network print job? How do I authenticate so the job will print?

    Hello, ETeague. 
    Thank you for visiting Apple Support Communities. 
    Here is an article that you may find helpful with this issue. 
    OS X Lion: Troubleshoot a network printer
    http://support.apple.com/kb/PH4220
    Cheers,
    Jason H. 

  • I recently upgraded to OS 10.6.8 and it paused network printer, now whole office cannot print. Help

    All Macs in the office recently updated to the new 10.6.8 OS and now the network printer (a XEROX machine) has been paused so that no print jobs sent to it from any computer are processed.  The machine itself still works (can copy, scan, fax, etc.) on its own, but new OS system is preventing anyone from sending jobs to it.  Any suggestions?

    FOund solution as follows:
    Go to the Finder, choose the Go menu, choose Go to Folder, enter or copy /usr/libexec/cups/backend/ the click Go and the "backend" folder will open in the Finder. With that folder open, Enter Time Machine, and go back in time until prior to the update, click on the LPD file and Restore it. I chose to keep both the original and the backup when Time Machine prompted, that way I end up with both files just in case.

  • Can't print from a windows pc to network printer

    I am having a network printer problem.
    I have a Canon printer plugged into the usb port of my Mac-Mini.  I can print fine from the Mac to the printer.  I have network sharing enabled for the printer.
    I have a Dell PC connected to an Airport Express via internet cable as part of my network.
    I have bonjour installed on the Dell
    Bonjour can see the networked canon printer and will install it as the default printer for the Dell PC.
    However, I can not print from the Dell unless I have the wrong printer driver (an HP driver) installed.  As long as the wrong driver is installed I can print the first page of a document only.
    If I install the correct Canon driver, the printer ceases to function.
    I tried connecting the printer to the airport express via usb.  Once I did this, I was able to print from the Dell pc with no problem using the correct driver.  But then, I could no longer print from the Mac-mini via the Airport Express connected printer.  The Mac could see the printer and identify that it was connected via Airport.  And the Mac will allow me to connect to the Airport connected printer .  But as soon as I trie to print something from the Mac, it fails and gives an error message or pauses and says the drivers may not be correct.
    Can anyone help me with this issue?

    Detective445 wrote:
    I believe that there may not be a solution to this because the printer will only recognize one set of drivers.  Since one set of drivers is for the Mac and one set is for a PC It will only work with one machine or the other.
    Then you should be able to print from the Mini after resetting the printer, e.g. by turning it off and back on after a short while. But it sounds as if this won't help either, and to be frank, it's not an "acceptable" explanation, either...
    So, what's the error message? Unless known, we can only keep guessing:
    You've reset the printer system in the Mini? Eventually consider deleting the Canon drivers manually afterwards, and only then add the printer again and re-install its software.
    If that doesn't help either, the issue must be a communication problem, meaning I'd recommend to double-/triple-check all comm-related things as well.

  • Network printer doesn't work any more...

    I have a network printer at work (xerox workcentre 7232) , it is on 30.30.30.0 subnet and I am on 172 subnet in my company (and I can't change that).  172 is routed to the the 30 network and I can ping the ip address of the printer.  The last time I printed something was at least a month ago or more and I had it setup and it worked just fine with the setup utility in cups (localhost:631).  Today I go to print something and gnome 3 tells me it's not connected.  I remove it and try to add it again with the same ppd and it just keeps telling me it's not connected.  Is there a bug with the newest cups?  This printer still works in a windows vm.
    sudo cat /var/log/pacman.log | grep cups
    [2010-10-17 22:44] installed libcups (1.4.4-1)
    [2010-10-17 11:34] upgraded libcups (1.4.4-1 -> 1.4.4-3)
    [2010-10-17 11:38] installed libgnomecups (0.2.3-7)
    [2010-10-17 11:48] installed lib32-libcups (1.4.4-5)
    [2010-10-18 23:26] Running 'pacman -S java-runtime libcups poppler libmythes libmspack libldap lucene sane'
    [2010-10-18 23:27] Running 'pacman -S libcups poppler libmythes libmspack libldap lucene sane'
    [2010-10-18 23:27] upgraded libcups (1.4.4-3 -> 1.4.4-3)
    [2010-10-18 23:34] >>please run /usr/sbin/cups-genppdupdate
    [2010-10-18 23:34] >>and restart cups deamon
    [2010-10-18 23:35] Running 'pacman -S cups ghostscript'
    [2010-10-18 23:35] installed cups (1.4.4-3)
    [2010-10-26 16:51] Running 'pacman -S cups'
    [2010-11-12 23:48] upgraded libcups (1.4.4-3 -> 1.4.5-1)
    [2010-11-12 23:48] upgraded cups (1.4.4-3 -> 1.4.5-1)
    [2010-11-12 23:48] upgraded lib32-libcups (1.4.4-5 -> 1.4.5-1)
    [2010-12-10 14:13] upgraded libcups (1.4.5-1 -> 1.4.5-2)
    [2010-12-10 14:13] upgraded cups (1.4.5-1 -> 1.4.5-2)
    [2011-01-15 20:29] upgraded libcups (1.4.5-2 -> 1.4.6-1)
    [2011-01-15 20:29] upgraded cups (1.4.5-2 -> 1.4.6-1)
    [2011-01-24 09:24] Running 'pacman -S giflib lib32-giflib libpng lib32-libpng libldap lib32-libldap lcms lib32-lcms mpg123 lib32-mpg123 openal lib32-openal jack lib32-jack libcups lib32-libcups gnutls lib32-gnutls v4l-utils lib32-v4l-utils'
    [2011-01-24 09:24] upgraded libcups (1.4.6-1 -> 1.4.6-1)
    [2011-01-24 09:24] upgraded lib32-libcups (1.4.5-1 -> 1.4.5-1)
    [2011-02-04 15:50] installed pycups (1.9.53-1)
    [2011-03-02 08:23] upgraded pycups (1.9.53-1 -> 1.9.54-1)
    [2011-04-09 16:12] upgraded pycups (1.9.54-1 -> 1.9.55-1)
    [2011-05-23 09:08] upgraded libcups (1.4.6-1 -> 1.4.6-2)
    [2011-05-23 09:08] upgraded cups (1.4.6-1 -> 1.4.6-2)
    [2011-05-23 09:09] installed cups-pk-helper (0.1.2-1)
    [2011-05-23 09:10] >>please run /usr/sbin/cups-genppdupdate
    [2011-05-23 09:10] >>and restart cups deamon
    [2011-05-23 09:13] upgraded libgnomecups (0.2.3-7 -> 0.2.3-8)
    [2011-05-23 14:18] removed libgnomecups (0.2.3-8)
    [2011-06-06 08:56] upgraded libcups (1.4.6-2 -> 1.4.6-3)
    [2011-06-06 08:56] upgraded cups (1.4.6-2 -> 1.4.6-3)
    [2011-06-17 19:43] upgraded pycups (1.9.55-1 -> 1.9.57-1)
    [2011-06-18 18:59] upgraded libcups (1.4.6-3 -> 1.4.6-4)
    [2011-06-18 18:59] upgraded cups (1.4.6-3 -> 1.4.6-4)
    [2011-06-18 18:59] upgraded lib32-libcups (1.4.5-1 -> 1.4.5-2)
    [2011-07-04 09:18] upgraded libcups (1.4.6-4 -> 1.4.7-1)
    [2011-07-04 09:18] upgraded cups (1.4.6-4 -> 1.4.7-1)
    [2011-07-12 10:57] Running 'pacman -S cups ghostscript gsfonts'
    [2011-07-12 10:59] Running 'pacman -S gutenprint foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters hplip splix ufr2 cups-pdf'
    [2011-07-12 10:59] Running 'pacman -S gutenprint foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters hplip splix cups-pdf'
    [2011-07-12 11:00] >>please run /usr/sbin/cups-genppdupdate
    [2011-07-12 11:00] >>and restart cups deamon
    [2011-07-12 11:00] directory. Install this directory to "/usr/share/cups/model/$MANUFACTURER/cms".
    [2011-07-12 11:00] To use cups-pdf, restart cups and visit the cups
    [2011-07-12 11:00] Note that cups-pdf has a configuration
    [2011-07-12 11:00] file in /etc/cups. The default location for
    [2011-07-12 11:00] pdf output is /var/spool/cups-pdf/$username.
    [2011-07-12 11:00] installed cups-pdf (2.5.1-1)
    [2011-07-12 11:17] Running 'pacman -U /tmp/yaourt-tmp-rick/PKGDEST.rsU/cups-xerox-2008.01.21-1-any.pkg.tar.xz'
    [2011-07-12 11:17] installed cups-xerox (2008.01.21-1)
    [2011-07-12 11:57] Running 'pacman -Rns cups-xerox'
    [2011-07-12 11:57] removed cups-xerox (2008.01.21-1)
    D [12/Jul/2011:13:25:57 -0400] [Job 36] ATTR: marker-types=toner,toner,toner,toner,wasteToner,unknown,unknown,unknown,unknown,transferUnit,transferUnit,fuser,developer,developer,developer,developer,cleanerUnit,unknown,unknown,unknown,unknown,unknown,unknown,opc
    D [12/Jul/2011:13:25:57 -0400] [Job 36] Backend returned status -8 (crashed)
    D [12/Jul/2011:13:25:57 -0400] [Job 36] Printer stopped due to backend errors; please consult the error_log file for details.
    D [12/Jul/2011:13:25:57 -0400] [Job 36] End of messages
    D [12/Jul/2011:13:25:57 -0400] [Job 36] printer-state=5(stopped)
    D [12/Jul/2011:13:25:57 -0400] [Job 36] printer-state-message="/usr/lib/cups/backend/lpd failed"
    D [12/Jul/2011:13:25:57 -0400] [Job 36] printer-state-reasons=paused
    E [12/Jul/2011:13:28:09 -0400] PID 7214 (/usr/lib/cups/backend/lpd) crashed on signal 8!
    D [12/Jul/2011:13:28:09 -0400] [Job 37] The following messages were recorded from 13:27:48 to 13:28:09
    D [12/Jul/2011:13:28:09 -0400] [Job 37] Adding start banner page "none".
    D [12/Jul/2011:13:28:09 -0400] [Job 37] Queued on "Work_Printer" by "rick".
    D [12/Jul/2011:13:28:09 -0400] [Job 37] Auto-typing file...
    D [12/Jul/2011:13:28:09 -0400] [Job 37] Request file type is application/postscript.
    D [12/Jul/2011:13:28:09 -0400] [Job 37] File of type application/postscript queued by "rick".
    D [12/Jul/2011:13:28:09 -0400] [Job 37] Adding end banner page "none".
    D [12/Jul/2011:13:28:09 -0400] [Job 37] job-sheets=none,none
    D [12/Jul/2011:13:28:09 -0400] [Job 37] argv[0]="Work_Printer"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] argv[1]="37"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] argv[2]="rick"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] argv[3]="A9ROkP6wpj"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] argv[4]="1"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] argv[5]="noCollate Duplex=None finishings=3 InputSlot=Auto JCLBanner Jog=None MediaColor=Unspecified MediaType=SystemDefault number-up=1 OutputBin=Auto PageRegion=Letter PageSize=Letter StapleLocation=None XRBackCoverSheet=None XRCMYKColorSpace=Commercial XRColorCorrection=Auto XRColorMode=Grayscale XREconomode=None noXRFax XRFeedEdge=LongEdge XRFinisher=BClass XRFrontCoverSheet=None noXRHighCapacityFeeder XRImageQuality=Normal XROutputMode=HighSpeed XRPaperTrays=TwoTrays XRSlipSheetPrint=None XRSlipSheetSource=None job-uuid=urn:uuid:06f38ba9-ae47-35c7-6115-4baedd5261af job-originating-host-name=localhost time-at-creation=1310491668 time-at-processing=1310491689"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] argv[6]="/var/spool/cups/d00037-001"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[1]="CUPS_DATADIR=/usr/share/cups"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[6]="CUPS_SERVERROOT=/etc/cups"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[7]="CUPS_STATEDIR=/var/run/cups"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[8]="HOME=/var/spool/cups/tmp"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[10]="SERVER_ADMIN=root@stupendousman"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[11]="SOFTWARE=CUPS/1.4.7"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[12]="TMPDIR=/var/spool/cups/tmp"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[13]="USER=root"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[15]="CUPS_ENCRYPTION=IfRequested"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[16]="IPP_PORT=631"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[17]="CHARSET=utf-8"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[18]="LANG=en_US.UTF-8"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[19]="PPD=/etc/cups/ppd/Work_Printer.ppd"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[20]="RIP_MAX_CACHE=8m"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[21]="CONTENT_TYPE=application/postscript"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[22]="DEVICE_URI=lpd://30.30.30.5/queue"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[23]="PRINTER_INFO=Xerox WorkCentre 7232"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[24]="PRINTER_LOCATION=Stationary room next to kitchen"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[25]="PRINTER=Work_Printer"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[26]="CUPS_FILETYPE=document"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-postscript"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] Started filter /usr/lib/cups/filter/pstops (PID 7213)
    D [12/Jul/2011:13:28:09 -0400] [Job 37] Started backend /usr/lib/cups/backend/lpd (PID 7214)
    D [12/Jul/2011:13:28:09 -0400] [Job 37] STATE: +connecting-to-device
    D [12/Jul/2011:13:28:09 -0400] [Job 37] Looking up "30.30.30.5"...
    D [12/Jul/2011:13:28:09 -0400] [Job 37] Copying print data...
    D [12/Jul/2011:13:28:09 -0400] [Job 37] Set job-printer-state-message to "Copying print data...", current level=INFO
    D [12/Jul/2011:13:28:09 -0400] [Job 37] backendRunLoop(print_fd=-1, device_fd=6, snmp_fd=5, addr=0x7f9dbf837108, use_bc=0, side_cb=0x7f9dbd755370)
    D [12/Jul/2011:13:28:09 -0400] [Job 37] Page = 612x792; 12,12 to 600,780
    D [12/Jul/2011:13:28:09 -0400] [Job 37] slow_collate=0, slow_duplex=0, slow_order=0
    D [12/Jul/2011:13:28:09 -0400] [Job 37] Before copy_comments - %!PS-Adobe-3.1
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %!PS-Adobe-3.1
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %ADO_DSC_Encoding: MacOS Roman
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%Title: ISSAICPayment.pdf
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%Creator: Adobe Acrobat 9.4.2
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%For: rick
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%CreationDate: 07/12/2011, 01:27:48 PM
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%BoundingBox: 11 15 601 777
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%HiResBoundingBox: 11.6200 15.0376 600.3801 776.9624
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%CropBox: 11.6200 15.0376 600.3801 776.9624
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%LanguageLevel: 3
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%DocumentNeededResources: (atend)
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%DocumentSuppliedResources: (atend)
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%DocumentNeededFeatures: (atend)
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%DocumentSuppliedFeatures: (atend)
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%DocumentData: Clean7Bit
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%PageOrder: Ascend
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%TargetDevice: (Xerox WorkCentre 7232/7242) (3016.103) 6
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%Pages: (atend)
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%DocumentProcessColors: (atend)
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%DocumentCustomColors: (atend)
    D [12/Jul/2011:13:28:09 -0400] [Job 37] %%EndComments
    D [12/Jul/2011:13:28:09 -0400] [Job 37] Before copy_prolog - %%BeginDefaults
    D [12/Jul/2011:13:28:09 -0400] [Job 37] Read 4096 bytes of print data...
    D [12/Jul/2011:13:28:09 -0400] [Job 37] hrDeviceDesc="Xerox WorkCentre 7232 v 4. 7. 0 Multifunction System"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] prtMarkerColorantValue.1.1 = "black"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] prtMarkerColorantValue.1.2 = "yellow"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] prtMarkerColorantValue.1.3 = "magenta"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] prtMarkerColorantValue.1.4 = "cyan"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] ATTR: marker-colors=#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none,#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none
    D [12/Jul/2011:13:28:09 -0400] [Job 37] ATTR: marker-names="Black Toner [K] Cartridge","Yellow Toner [Y] Cartridge","Magenta Toner [M] Cartridge","Cyan Toner [C] Cartridge","Waste Bottle","","","","","Bias Transfer Roll","Transfer Belt","Fuser Assembly","Black Developer","Yellow Developer","Magenta Developer","Cyan Developer","Transfer Belt Cleaner","","","","","","","Drum Cartridge"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] ATTR: marker-types=toner,toner,toner,toner,wasteToner,unknown,unknown,unknown,unknown,transferUnit,transferUnit,fuser,developer,developer,developer,developer,cleanerUnit,unknown,unknown,unknown,unknown,unknown,unknown,opc
    D [12/Jul/2011:13:28:09 -0400] [Job 37] Backend returned status -8 (crashed)
    D [12/Jul/2011:13:28:09 -0400] [Job 37] Printer stopped due to backend errors; please consult the error_log file for details.
    D [12/Jul/2011:13:28:09 -0400] [Job 37] End of messages
    D [12/Jul/2011:13:28:09 -0400] [Job 37] printer-state=5(stopped)
    D [12/Jul/2011:13:28:09 -0400] [Job 37] printer-state-message="/usr/lib/cups/backend/lpd failed"
    D [12/Jul/2011:13:28:09 -0400] [Job 37] printer-state-reasons=paused
    E [12/Jul/2011:13:30:26 -0400] PID 7287 (/usr/lib/cups/backend/lpd) crashed on signal 8!
    D [12/Jul/2011:13:30:26 -0400] [Job 37] The following messages were recorded from 13:30:26 to 13:30:26
    D [12/Jul/2011:13:30:26 -0400] [Job 37] job-sheets=none,none
    D [12/Jul/2011:13:30:26 -0400] [Job 37] argv[0]="Work_Printer"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] argv[1]="37"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] argv[2]="rick"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] argv[3]="A9ROkP6wpj"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] argv[4]="1"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] argv[5]="noCollate Duplex=None finishings=3 InputSlot=Auto JCLBanner Jog=None MediaColor=Unspecified MediaType=SystemDefault number-up=1 OutputBin=Auto PageRegion=Letter PageSize=Letter StapleLocation=None XRBackCoverSheet=None XRCMYKColorSpace=Commercial XRColorCorrection=Auto XRColorMode=Grayscale XREconomode=None noXRFax XRFeedEdge=LongEdge XRFinisher=BClass XRFrontCoverSheet=None noXRHighCapacityFeeder XRImageQuality=Normal XROutputMode=HighSpeed XRPaperTrays=TwoTrays XRSlipSheetPrint=None XRSlipSheetSource=None job-uuid=urn:uuid:06f38ba9-ae47-35c7-6115-4baedd5261af job-originating-host-name=localhost time-at-creation=1310491668 time-at-processing=1310491826"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] argv[6]="/var/spool/cups/d00037-001"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[1]="CUPS_DATADIR=/usr/share/cups"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[6]="CUPS_SERVERROOT=/etc/cups"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[7]="CUPS_STATEDIR=/var/run/cups"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[8]="HOME=/var/spool/cups/tmp"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[10]="SERVER_ADMIN=root@stupendousman"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[11]="SOFTWARE=CUPS/1.4.7"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[12]="TMPDIR=/var/spool/cups/tmp"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[13]="USER=root"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[15]="CUPS_ENCRYPTION=IfRequested"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[16]="IPP_PORT=631"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[17]="CHARSET=utf-8"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[18]="LANG=en_US.UTF-8"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[19]="PPD=/etc/cups/ppd/Work_Printer.ppd"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[20]="RIP_MAX_CACHE=8m"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[21]="CONTENT_TYPE=application/postscript"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[22]="DEVICE_URI=lpd://30.30.30.5/queue"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[23]="PRINTER_INFO=Xerox WorkCentre 7232"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[24]="PRINTER_LOCATION=Stationary room next to kitchen"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[25]="PRINTER=Work_Printer"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[26]="CUPS_FILETYPE=document"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-postscript"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] Started filter /usr/lib/cups/filter/pstops (PID 7286)
    D [12/Jul/2011:13:30:26 -0400] [Job 37] Started backend /usr/lib/cups/backend/lpd (PID 7287)
    D [12/Jul/2011:13:30:26 -0400] [Job 37] STATE: +connecting-to-device
    D [12/Jul/2011:13:30:26 -0400] [Job 37] Looking up "30.30.30.5"...
    D [12/Jul/2011:13:30:26 -0400] [Job 37] Copying print data...
    D [12/Jul/2011:13:30:26 -0400] [Job 37] Set job-printer-state-message to "Copying print data...", current level=INFO
    D [12/Jul/2011:13:30:26 -0400] [Job 37] backendRunLoop(print_fd=-1, device_fd=6, snmp_fd=5, addr=0x7fb0d34ee108, use_bc=0, side_cb=0x7fb0d19e9370)
    D [12/Jul/2011:13:30:26 -0400] [Job 37] Page = 612x792; 12,12 to 600,780
    D [12/Jul/2011:13:30:26 -0400] [Job 37] slow_collate=0, slow_duplex=0, slow_order=0
    D [12/Jul/2011:13:30:26 -0400] [Job 37] Before copy_comments - %!PS-Adobe-3.1
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %!PS-Adobe-3.1
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %ADO_DSC_Encoding: MacOS Roman
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%Title: ISSAICPayment.pdf
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%Creator: Adobe Acrobat 9.4.2
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%For: rick
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%CreationDate: 07/12/2011, 01:27:48 PM
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%BoundingBox: 11 15 601 777
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%HiResBoundingBox: 11.6200 15.0376 600.3801 776.9624
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%CropBox: 11.6200 15.0376 600.3801 776.9624
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%LanguageLevel: 3
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%DocumentNeededResources: (atend)
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%DocumentSuppliedResources: (atend)
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%DocumentNeededFeatures: (atend)
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%DocumentSuppliedFeatures: (atend)
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%DocumentData: Clean7Bit
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%PageOrder: Ascend
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%TargetDevice: (Xerox WorkCentre 7232/7242) (3016.103) 6
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%Pages: (atend)
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%DocumentProcessColors: (atend)
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%DocumentCustomColors: (atend)
    D [12/Jul/2011:13:30:26 -0400] [Job 37] %%EndComments
    D [12/Jul/2011:13:30:26 -0400] [Job 37] Before copy_prolog - %%BeginDefaults
    D [12/Jul/2011:13:30:26 -0400] [Job 37] Read 8192 bytes of print data...
    D [12/Jul/2011:13:30:26 -0400] [Job 37] hrDeviceDesc="Xerox WorkCentre 7232 v 4. 7. 0 Multifunction System"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] prtMarkerColorantValue.1.1 = "black"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] prtMarkerColorantValue.1.2 = "yellow"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] prtMarkerColorantValue.1.3 = "magenta"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] prtMarkerColorantValue.1.4 = "cyan"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] ATTR: marker-colors=#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none,#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none
    D [12/Jul/2011:13:30:26 -0400] [Job 37] ATTR: marker-names="Black Toner [K] Cartridge","Yellow Toner [Y] Cartridge","Magenta Toner [M] Cartridge","Cyan Toner [C] Cartridge","Waste Bottle","","","","","Bias Transfer Roll","Transfer Belt","Fuser Assembly","Black Developer","Yellow Developer","Magenta Developer","Cyan Developer","Transfer Belt Cleaner","","","","","","","Drum Cartridge"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] ATTR: marker-types=toner,toner,toner,toner,wasteToner,unknown,unknown,unknown,unknown,transferUnit,transferUnit,fuser,developer,developer,developer,developer,cleanerUnit,unknown,unknown,unknown,unknown,unknown,unknown,opc
    D [12/Jul/2011:13:30:26 -0400] [Job 37] Backend returned status -8 (crashed)
    D [12/Jul/2011:13:30:26 -0400] [Job 37] Printer stopped due to backend errors; please consult the error_log file for details.
    D [12/Jul/2011:13:30:26 -0400] [Job 37] End of messages
    D [12/Jul/2011:13:30:26 -0400] [Job 37] printer-state=5(stopped)
    D [12/Jul/2011:13:30:26 -0400] [Job 37] printer-state-message="/usr/lib/cups/backend/lpd failed"
    D [12/Jul/2011:13:30:26 -0400] [Job 37] printer-state-reasons=paused
    E [12/Jul/2011:16:11:45 -0400] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    E [12/Jul/2011:16:12:09 -0400] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    E [12/Jul/2011:16:12:40 -0400] PID 3377 (/usr/lib/cups/backend/lpd) crashed on signal 8!
    D [12/Jul/2011:16:12:40 -0400] [Job 38] The following messages were recorded from 16:12:40 to 16:12:40
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Adding start banner page "none".
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Queued on "Work_Printer" by "root".
    D [12/Jul/2011:16:12:40 -0400] [Job 38] File of type application/vnd.cups-command queued by "root".
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Adding end banner page "none".
    D [12/Jul/2011:16:12:40 -0400] [Job 38] job-sheets=none,none
    D [12/Jul/2011:16:12:40 -0400] [Job 38] argv[0]="Work_Printer"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] argv[1]="38"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] argv[2]="root"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] argv[3]="Set Default Options"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] argv[4]="1"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] argv[5]="job-uuid=urn:uuid:13f3341b-ff43-384c-74aa-ef0166af5d27 job-originating-host-name=localhost time-at-creation=1310501560 time-at-processing=1310501560 AP_D_InputSlot="
    D [12/Jul/2011:16:12:40 -0400] [Job 38] argv[6]="/var/spool/cups/d00038-001"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[1]="CUPS_DATADIR=/usr/share/cups"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[6]="CUPS_SERVERROOT=/etc/cups"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[7]="CUPS_STATEDIR=/var/run/cups"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[8]="HOME=/var/spool/cups/tmp"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[10]="SERVER_ADMIN=root@stupendousman"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[11]="SOFTWARE=CUPS/1.4.7"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[12]="TMPDIR=/var/spool/cups/tmp"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[13]="USER=root"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[15]="CUPS_ENCRYPTION=IfRequested"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[16]="IPP_PORT=631"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[17]="CHARSET=utf-8"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[18]="LANG=en_US.UTF-8"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[19]="PPD=/etc/cups/ppd/Work_Printer.ppd"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[20]="RIP_MAX_CACHE=8m"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[21]="CONTENT_TYPE=application/vnd.cups-command"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[22]="DEVICE_URI=lpd://30.30.30.5/PASSTHRU"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[23]="PRINTER_INFO=Xerox 7232"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[24]="PRINTER_LOCATION=Stationary room next to kitchen"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[25]="PRINTER=Work_Printer"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[26]="CUPS_FILETYPE=document"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[27]="FINAL_CONTENT_TYPE=printer/Work_Printer"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Started filter /usr/lib/cups/filter/commandtops (PID 3376)
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Started backend /usr/lib/cups/backend/lpd (PID 3377)
    D [12/Jul/2011:16:12:40 -0400] [Job 38] STATE: +connecting-to-device
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Looking up "30.30.30.5"...
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Copying print data...
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Set job-printer-state-message to "Copying print data...", current level=INFO
    D [12/Jul/2011:16:12:40 -0400] [Job 38] backendRunLoop(print_fd=-1, device_fd=6, snmp_fd=5, addr=0x7f00a4f86108, use_bc=0, side_cb=0x7f00a3ed9370)
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Unable to auto-configure PostScript Printer - no bidirectional I/O available!
    D [12/Jul/2011:16:12:40 -0400] [Job 38] STATE: +connecting-to-device
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Looking up "30.30.30.5"...
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Connecting to 30.30.30.5:515 for printer PASSTHRU
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Connecting to printer...
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Set job-printer-state-message to "Connecting to printer...", current level=INFO
    D [12/Jul/2011:16:12:40 -0400] [Job 38] STATE: -connecting-to-device
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Connected to printer...
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Set job-printer-state-message to "Connected to printer...", current level=INFO
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Connected to 30.30.30.5:515 (IPv4) (local port 1023)...
    D [12/Jul/2011:16:12:40 -0400] [Job 38] hrDeviceDesc="Xerox WorkCentre 7232 v 4. 7. 0 Multifunction System"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] prtMarkerColorantValue.1.1 = "black"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] prtMarkerColorantValue.1.2 = "yellow"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] prtMarkerColorantValue.1.3 = "magenta"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] prtMarkerColorantValue.1.4 = "cyan"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] ATTR: marker-colors=#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none,#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none
    D [12/Jul/2011:16:12:40 -0400] [Job 38] ATTR: marker-names="Black Toner [K] Cartridge","Yellow Toner [Y] Cartridge","Magenta Toner [M] Cartridge","Cyan Toner [C] Cartridge","Waste Bottle","","","","","Bias Transfer Roll","Transfer Belt","Fuser Assembly","Black Developer","Yellow Developer","Magenta Developer","Cyan Developer","Transfer Belt Cleaner","","","","","","","Drum Cartridge"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] ATTR: marker-types=toner,toner,toner,toner,wasteToner,unknown,unknown,unknown,unknown,transferUnit,transferUnit,fuser,developer,developer,developer,developer,cleanerUnit,unknown,unknown,unknown,unknown,unknown,unknown,opc
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Backend returned status -8 (crashed)
    D [12/Jul/2011:16:12:40 -0400] [Job 38] Printer stopped due to backend errors; please consult the error_log file for details.
    D [12/Jul/2011:16:12:40 -0400] [Job 38] End of messages
    D [12/Jul/2011:16:12:40 -0400] [Job 38] printer-state=5(stopped)
    D [12/Jul/2011:16:12:40 -0400] [Job 38] printer-state-message="/usr/lib/cups/backend/lpd failed"
    D [12/Jul/2011:16:12:40 -0400] [Job 38] printer-state-reasons=paused
    E [12/Jul/2011:16:12:54 -0400] PID 3381 (/usr/lib/cups/backend/lpd) crashed on signal 8!
    D [12/Jul/2011:16:12:54 -0400] [Job 38] The following messages were recorded from 16:12:54 to 16:12:54
    D [12/Jul/2011:16:12:54 -0400] [Job 38] job-sheets=none,none
    D [12/Jul/2011:16:12:54 -0400] [Job 38] argv[0]="Work_Printer"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] argv[1]="38"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] argv[2]="root"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] argv[3]="Set Default Options"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] argv[4]="1"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] argv[5]="job-uuid=urn:uuid:13f3341b-ff43-384c-74aa-ef0166af5d27 job-originating-host-name=localhost time-at-creation=1310501560 time-at-processing=1310501574 AP_D_InputSlot="
    D [12/Jul/2011:16:12:54 -0400] [Job 38] argv[6]="/var/spool/cups/d00038-001"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[1]="CUPS_DATADIR=/usr/share/cups"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[6]="CUPS_SERVERROOT=/etc/cups"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[7]="CUPS_STATEDIR=/var/run/cups"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[8]="HOME=/var/spool/cups/tmp"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[10]="SERVER_ADMIN=root@stupendousman"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[11]="SOFTWARE=CUPS/1.4.7"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[12]="TMPDIR=/var/spool/cups/tmp"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[13]="USER=root"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[15]="CUPS_ENCRYPTION=IfRequested"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[16]="IPP_PORT=631"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[17]="CHARSET=utf-8"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[18]="LANG=en_US.UTF-8"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[19]="PPD=/etc/cups/ppd/Work_Printer.ppd"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[20]="RIP_MAX_CACHE=8m"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[21]="CONTENT_TYPE=application/vnd.cups-command"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[22]="DEVICE_URI=lpd://30.30.30.5/PASSTHRU"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[23]="PRINTER_INFO=Xerox 7232"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[24]="PRINTER_LOCATION=Stationary room next to kitchen"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[25]="PRINTER=Work_Printer"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[26]="CUPS_FILETYPE=document"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[27]="FINAL_CONTENT_TYPE=printer/Work_Printer"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] Started filter /usr/lib/cups/filter/commandtops (PID 3380)
    D [12/Jul/2011:16:12:54 -0400] [Job 38] Started backend /usr/lib/cups/backend/lpd (PID 3381)
    D [12/Jul/2011:16:12:54 -0400] [Job 38] STATE: +connecting-to-device
    D [12/Jul/2011:16:12:54 -0400] [Job 38] Looking up "30.30.30.5"...
    D [12/Jul/2011:16:12:54 -0400] [Job 38] Copying print data...
    D [12/Jul/2011:16:12:54 -0400] [Job 38] Set job-printer-state-message to "Copying print data...", current level=INFO
    D [12/Jul/2011:16:12:54 -0400] [Job 38] backendRunLoop(print_fd=-1, device_fd=6, snmp_fd=5, addr=0x7f1d60aa5108, use_bc=0, side_cb=0x7f1d5f17c370)
    D [12/Jul/2011:16:12:54 -0400] [Job 38] Unable to auto-configure PostScript Printer - no bidirectional I/O available!
    D [12/Jul/2011:16:12:54 -0400] [Job 38] STATE: +connecting-to-device
    D [12/Jul/2011:16:12:54 -0400] [Job 38] Looking up "30.30.30.5"...
    D [12/Jul/2011:16:12:54 -0400] [Job 38] Connecting to 30.30.30.5:515 for printer PASSTHRU
    D [12/Jul/2011:16:12:54 -0400] [Job 38] Connecting to printer...
    D [12/Jul/2011:16:12:54 -0400] [Job 38] Set job-printer-state-message to "Connecting to printer...", current level=INFO
    D [12/Jul/2011:16:12:54 -0400] [Job 38] STATE: -connecting-to-device
    D [12/Jul/2011:16:12:54 -0400] [Job 38] Connected to printer...
    D [12/Jul/2011:16:12:54 -0400] [Job 38] Set job-printer-state-message to "Connected to printer...", current level=INFO
    D [12/Jul/2011:16:12:54 -0400] [Job 38] Connected to 30.30.30.5:515 (IPv4) (local port 1022)...
    D [12/Jul/2011:16:12:54 -0400] [Job 38] hrDeviceDesc="Xerox WorkCentre 7232 v 4. 7. 0 Multifunction System"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] prtMarkerColorantValue.1.1 = "black"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] prtMarkerColorantValue.1.2 = "yellow"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] prtMarkerColorantValue.1.3 = "magenta"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] prtMarkerColorantValue.1.4 = "cyan"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] ATTR: marker-colors=#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none,#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none
    D [12/Jul/2011:16:12:54 -0400] [Job 38] ATTR: marker-names="Black Toner [K] Cartridge","Yellow Toner [Y] Cartridge","Magenta Toner [M] Cartridge","Cyan Toner [C] Cartridge","Waste Bottle","","","","","Bias Transfer Roll","Transfer Belt","Fuser Assembly","Black Developer","Yellow Developer","Magenta Developer","Cyan Developer","Transfer Belt Cleaner","","","","","","","Drum Cartridge"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] ATTR: marker-types=toner,toner,toner,toner,wasteToner,unknown,unknown,unknown,unknown,transferUnit,transferUnit,fuser,developer,developer,developer,developer,cleanerUnit,unknown,unknown,unknown,unknown,unknown,unknown,opc
    D [12/Jul/2011:16:12:54 -0400] [Job 38] Backend returned status -8 (crashed)
    D [12/Jul/2011:16:12:54 -0400] [Job 38] Printer stopped due to backend errors; please consult the error_log file for details.
    D [12/Jul/2011:16:12:54 -0400] [Job 38] End of messages
    D [12/Jul/2011:16:12:54 -0400] [Job 38] printer-state=5(stopped)
    D [12/Jul/2011:16:12:54 -0400] [Job 38] printer-state-message="/usr/lib/cups/backend/lpd failed"
    D [12/Jul/2011:16:12:54 -0400] [Job 38] printer-state-reasons=paused
    E [12/Jul/2011:16:13:09 -0400] PID 3385 (/usr/lib/cups/backend/lpd) crashed on signal 8!
    D [12/Jul/2011:16:13:09 -0400] [Job 38] The following messages were recorded from 16:13:09 to 16:13:09
    D [12/Jul/2011:16:13:09 -0400] [Job 38] job-sheets=none,none
    D [12/Jul/2011:16:13:09 -0400] [Job 38] argv[0]="Work_Printer"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] argv[1]="38"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] argv[2]="root"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] argv[3]="Set Default Options"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] argv[4]="1"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] argv[5]="job-uuid=urn:uuid:13f3341b-ff43-384c-74aa-ef0166af5d27 job-originating-host-name=localhost time-at-creation=1310501560 time-at-processing=1310501589 AP_D_InputSlot="
    D [12/Jul/2011:16:13:09 -0400] [Job 38] argv[6]="/var/spool/cups/d00038-001"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[1]="CUPS_DATADIR=/usr/share/cups"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[6]="CUPS_SERVERROOT=/etc/cups"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[7]="CUPS_STATEDIR=/var/run/cups"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[8]="HOME=/var/spool/cups/tmp"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[10]="SERVER_ADMIN=root@stupendousman"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[11]="SOFTWARE=CUPS/1.4.7"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[12]="TMPDIR=/var/spool/cups/tmp"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[13]="USER=root"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[15]="CUPS_ENCRYPTION=IfRequested"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[16]="IPP_PORT=631"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[17]="CHARSET=utf-8"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[18]="LANG=en_US.UTF-8"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[19]="PPD=/etc/cups/ppd/Work_Printer.ppd"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[20]="RIP_MAX_CACHE=8m"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[21]="CONTENT_TYPE=application/vnd.cups-command"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[22]="DEVICE_URI=lpd://30.30.30.5/PASSTHRU"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[23]="PRINTER_INFO=Xerox 7232"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[24]="PRINTER_LOCATION=Stationary room next to kitchen"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[25]="PRINTER=Work_Printer"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[26]="CUPS_FILETYPE=document"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[27]="FINAL_CONTENT_TYPE=printer/Work_Printer"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] Started filter /usr/lib/cups/filter/commandtops (PID 3384)
    D [12/Jul/2011:16:13:09 -0400] [Job 38] Started backend /usr/lib/cups/backend/lpd (PID 3385)
    D [12/Jul/2011:16:13:09 -0400] [Job 38] STATE: +connecting-to-device
    D [12/Jul/2011:16:13:09 -0400] [Job 38] Looking up "30.30.30.5"...
    D [12/Jul/2011:16:13:09 -0400] [Job 38] Copying print data...
    D [12/Jul/2011:16:13:09 -0400] [Job 38] Set job-printer-state-message to "Copying print data...", current level=INFO
    D [12/Jul/2011:16:13:09 -0400] [Job 38] backendRunLoop(print_fd=-1, device_fd=6, snmp_fd=5, addr=0x7f77b4cea108, use_bc=0, side_cb=0x7f77b2edc370)
    D [12/Jul/2011:16:13:09 -0400] [Job 38] Unable to auto-configure PostScript Printer - no bidirectional I/O available!
    D [12/Jul/2011:16:13:09 -0400] [Job 38] STATE: +connecting-to-device
    D [12/Jul/2011:16:13:09 -0400] [Job 38] Looking up "30.30.30.5"...
    D [12/Jul/2011:16:13:09 -0400] [Job 38] Connecting to 30.30.30.5:515 for printer PASSTHRU
    D [12/Jul/2011:16:13:09 -0400] [Job 38] Connecting to printer...
    D [12/Jul/2011:16:13:09 -0400] [Job 38] Set job-printer-state-message to "Connecting to printer...", current level=INFO
    D [12/Jul/2011:16:13:09 -0400] [Job 38] STATE: -connecting-to-device
    D [12/Jul/2011:16:13:09 -0400] [Job 38] Connected to printer...
    D [12/Jul/2011:16:13:09 -0400] [Job 38] Set job-printer-state-message to "Connected to printer...", current level=INFO
    D [12/Jul/2011:16:13:09 -0400] [Job 38] Connected to 30.30.30.5:515 (IPv4) (local port 1021)...
    D [12/Jul/2011:16:13:09 -0400] [Job 38] hrDeviceDesc="Xerox WorkCentre 7232 v 4. 7. 0 Multifunction System"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] prtMarkerColorantValue.1.1 = "black"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] prtMarkerColorantValue.1.2 = "yellow"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] prtMarkerColorantValue.1.3 = "magenta"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] prtMarkerColorantValue.1.4 = "cyan"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] ATTR: marker-colors=#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none,#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none
    D [12/Jul/2011:16:13:09 -0400] [Job 38] ATTR: marker-names="Black Toner [K] Cartridge","Yellow Toner [Y] Cartridge","Magenta Toner [M] Cartridge","Cyan Toner [C] Cartridge","Waste Bottle","","","","","Bias Transfer Roll","Transfer Belt","Fuser Assembly","Black Developer","Yellow Developer","Magenta Developer","Cyan Developer","Transfer Belt Cleaner","","","","","","","Drum Cartridge"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] ATTR: marker-types=toner,toner,toner,toner,wasteToner,unknown,unknown,unknown,unknown,transferUnit,transferUnit,fuser,developer,developer,developer,developer,cleanerUnit,unknown,unknown,unknown,unknown,unknown,unknown,opc
    D [12/Jul/2011:16:13:09 -0400] [Job 38] Backend returned status -8 (crashed)
    D [12/Jul/2011:16:13:09 -0400] [Job 38] Printer stopped due to backend errors; please consult the error_log file for details.
    D [12/Jul/2011:16:13:09 -0400] [Job 38] End of messages
    D [12/Jul/2011:16:13:09 -0400] [Job 38] printer-state=5(stopped)
    D [12/Jul/2011:16:13:09 -0400] [Job 38] printer-state-message="/usr/lib/cups/backend/lpd failed"
    D [12/Jul/2011:16:13:09 -0400] [Job 38] printer-state-reasons=paused
    sudo cat /etc/cups/printers.conf
    # Printer configuration file for CUPS v1.4.7
    # Written by cupsd on 2011-07-12 16:52
    # DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
    <Printer Work_Printer>
    Info Xerox 7232
    Location Stationary room next to kitchen
    MakeModel Xerox WorkCentre 7232/7242
    DeviceURI lpd://30.30.30.5/PASSTHRU
    State Stopped
    StateMessage /usr/lib/cups/backend/lpd failed
    StateTime 1310503937
    Reason paused
    Type 8433916
    Filter application/vnd.cups-raw 0 -
    Filter application/vnd.cups-command 0 commandtops
    Filter application/vnd.cups-postscript 0 -
    Accepting Yes
    Shared No
    JobSheets none none
    QuotaPeriod 0
    PageLimit 0
    KLimit 0
    OpPolicy default
    ErrorPolicy stop-printer
    Attribute marker-colors \#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none,#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none
    Attribute marker-names Black Toner [K] Cartridge,Yellow Toner [Y] Cartridge,Magenta Toner [M] Cartridge,Cyan Toner [C] Cartridge,Waste Bottle,,,,,Bias Transfer Roll,Transfer Belt,Fuser Assembly,Black Developer,Yellow Developer,Magenta Developer,Cyan Developer,Transfer Belt Cleaner,,,,,,,Drum Cartridge
    Attribute marker-types toner,toner,toner,toner,wasteToner,unknown,unknown,unknown,unknown,transferUnit,transferUnit,fuser,developer,developer,developer,developer,cleanerUnit,unknown,unknown,unknown,unknown,unknown,unknown,opc
    Attribute marker-change-time 1310503937
    </Printer>

    Hi !
    Looking at the patch included upstream (http://www.cups.org/str.php?L3875), it seems like a SNMP issue regarding supplies levels.
    As a temporary workaround, you can disable SNMP supplies levels get in your printer PPD file in /etc/cups/ppd/ adding the directive:
    *cupsSNMPSupplies: False
    Then restart cups, and remember to resume your printer (cups stops it after an error occurr). You can do it from the web interface (http://localhost:631)
    Tested on a Debian box with an office network printer. More info on CUPS PPD directives here: http://www.cups.org/documentation.php/spec-ppd.html
    Last edited by jackdroido (2011-07-26 14:06:21)

  • OSX Lion, Windows Network Printer

    I upgraded to OSX Lion, the process was easy and works well.
    The printers I setup with Snow Leopard on the windows network do not function anymore.
    When I print the printer goes to pause immediately. Release the job, it goes to pause again.
    Oddly before one could browse the network and add printers. That functionality is also gone now.
    Some of the printers require authentication the previous OS would allow you to enter your windows network password.
    There are other folks also complaining of the same issue. It may have to do with the SMBX that is part of the new OS.

    I have the same issue, and with me, it is not a keychains issue.
    In the past, my Brother HL-2030 laser printer was connected to my DSL modem (a Telekom Austria Pirelli PRGAV4202N). After entering its IPP URL, that worked perfectly.
    With Lion, this has stopped working, showing exactly the symptoms you described (printer goes to pause immediately).
    Today, I have moved the printer from the Pirelli modem to my Iomega StorCenter ix2-200 NAS which supports USB printing, too.
    With the NAS, printing does not work, either, but the symptoms slightly vary. In the beginning, there is a slight improvement: When I click the "+" icon for adding a printer, the printer shows up in the list! (This is new - with the Pirelli modem, I had to manually enter the IPP URL.)
    But as soon as I try printing, the printer queue dialog (German MacOS) shows "Drucker suchen" ("searching for a printer") for a few seconds, and then the printer dialog shows the printer as paused ("Angehalten.") with the additional information "Drucker ist nicht angeschlossen" ("printer is not connected").
    When selecting the blue "i" (print job info), the information "Auftragsnachricht: Der Drucker-URI ist falsch oder existiert nicht mehr." (literally: "print job message: The printer URI is wrong or does not exist any longer".)
    This is really annoying, and I am desparately looking for a solution, too.

  • Print jobs pause automatically.

    Hello
    Trying to print threw my home network (wired with the correct address) on a Canon MP780. Each time I printed the job pauses. I click resume and it pauses again. I downloaded the latest driver from Canon and Gutenprint 5.0.2
    appreciate any help
    thanks

    I have the same general issue, but with slightly different behavior. I print over a network to two different HP laserjets using IP printing. I find I can print just fine from most applications (e.g., Word, PowerPoint) except Adobe applications. When I try to print from Illustrator or Acrobat, the job is sent to the printer and I can see it in the queue. But, as you describe, the printer immediately pauses. If I go into the queue and unpause the printer, then the job immediately stops (the printer doesn't pause, the job stops). If I restart the job, the printer immediately pauses again. It goes back and forth like this forever. This happens on one of the printers I typically use. On the other HP printer I commonly use, the job never pauses, but I get a message in the printer dialog that says: "unable to get printer status (Not Implemented)" On this printer the job is listed as printing, but it never goes anywhere. I have deleted this printer and re-added it, all to no avail.
    Note that this happens regardless of whether I use CS3 or an old copy of CS1 that printed fine before I upgraded to Leopard.
    I looked on Adobe's web site for a discussion of this issue and found none.

  • Can't connect to a networked printer - Airlink101 USB Print Server

    I am new to Mac. I am trying to connect my iMac to a Brother HL-5040 laser printer through an Airlink101 USB print server over my wireless network. The iMac connected to the 802.11g network immediately without any issues which is more than I can say for the other XP machines I own. I have several other Windows PC's networked and they all print just fine. Using the print setup utility, I can find the networked print server and add it to the printer list; however, I can not print. The status monitor indicates that it can't connect. The install directions on the Airlink101 website for the Mac does not seem to match the options that are part of the "add a printer" utilility. Any help would be appreciated.

    thlatz wrote:
    When we try to add another one of the printers it finds the printer with the IP, it auto-detected the driver, then when I click next, I get an error stating there was an "error connecting to the printer would you continue anyway?"
    We try to print but the queue just continuously pauses and nothing gets sent to the printer.
    This could be a result of the protocol you selected. IPP is the default listed. If you remove this printer and add again, but this time change the protocol drop menu to HP Jetdirect-Socket, see if this works better for the user.

  • Network printer just quit was working fine

    HP OfficeJet J5780 attached to USB on Windows 7 Home 64 bit. Wifes HP laptop, Win XP (32) over the network was working fine for the last 3 weeks. Today she gets errors "No printer installed"  it shows in the Printers and Faxes window. I have uninstalled and reinstalled several times, even totally deleting the driver in printer server. I use the wizard, it finds the network printer on my machine, it says there are no associated drivers in the server would you like to install them? I say yes, it installs successfully but if printer icon is right clicked,  one option is to "Pause Printing" even though there hasn't been a printing job initiated. Also when Preferences is clicked the big error thing pop-s up. The printer shows in printer dialogs but when clicked a message, "a Printer must be installed..." appears 

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try:                  
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Printing issues on network printer (Xerox Phaser 4500DT)

    I need to be able to print to a network printer which is a Xerox Phaser 4500DT. It is simply networked from its IP address. I have the latest driver. Every time I try to print anything the job automatically goes on pause. If I click resume, it does print, but this takes time, every time I print. The URL is "pap://*/Phaser%204500DT/LaserWriter".
    Any help would be greatly appreciated. Thanks.

    Since upgrading to 10.5.6 I can no longer print multiple jobs to any of my Phaser 4500 machines(N/DT)? If the printer is clear, the job will spool and print.
    If more than one job is sent or multiple users print at the same time, the local print queue is changed to 'PAUSE PRINTER' - I have tried printing via Appletalk, Bonjour & IP printing, the same problem occurs.
    Why does 10.5.6 not allow you to spool and queue a print job any more? This is VERY frustrating in a busy office with multiple users attempting to print at the same time! - Any advice would be gratefully received!

  • Printing issues on network printer (Sharp MX-N700N)

    Hi all,
    Well my issue is twofold really. Primarily, I need to be able to print to a network printer which is the Sharp MX-M700N. Now it's on a windows network, so I added it to my printer list via it's IP address. So far so good...so now I have the latest driver avaialble from the Sharp consumer website (sharp-usa.com) and what happens is anytime I try to print anything, the job automatically goes on pause. Even if I click resume, it then pauses again immediately.
    Now the second part of my issue, is that other people in my office who are also on Macs running 10.5.2 have added this printer via it's IP, but they used an older driver (for version 10.4.x) that was downloaded off of the Sharp service site, accessible only by authorized technicians. Now here's the thing....they can print to it perfectly.
    So immediate thought is...use the driver they're using right? Well, when I try to install that driver, it's telling me it can't because a newer version is already installed. I've gone into Macintosh HD > Library > Printers to find the driver to try and delete it, but there's tons of stuff in the Sharp folder there and I'm worried about just randomly deleting files.
    Any help would be greatly appreciated! Thanks!

    Reading through your post, you may find that the latest driver you have will work, you just might have to ensure you have the correct protocol selected and queue name entered. If you look at one of the other Mac's that is working, you can select the print in the list, select 'Open Print Queue' and then select the Info icon. This will display the General tab and in the lower section next to URI will be the protocol and queue used; ex lpd://ip_address/print.
    If you do have the exact settings in your Mac, and you want to look at removing the driver, then check that an uninstaller is not included with the driver installer. I've seen with the Canon copier drivers, you have the option to Uninstall and this removes all the files located in /Library/Printers/Canon/PS. Hopefully you have something the same for the Sharp.
    If not, then copy the contents of the Sharp folder to another location and then delete the original folder contents.

  • AIO Remote wont recognize my network printer deskjet 3050

    AIO remote app (IOS) did not recognize my network printer (Deskjet 3050), other apps (printer pro lite) did recognize the printer flawlessly, both the printer and the iphone are in the same network, I can print from my PC and my mac but not from AIO remote app (not even recognize the printer).
    Can you help me?

    Hello MrCrysis,
    With the Printer Pro Lite app working to printer, this is excellent to hear. Although this is not an HP app. So to explain as to why the AiO Remote app is not recognizing your printer, and not being able to scan. Your printer does not have AirPrint capabilities according to the 'HP Deskjet 3050 (J610) and 3050A (J611) All-in-One Printer Series Product Specifications'. AirPrint is a requirement for the HP AiO Remote app to work, and because the printer does not have AirPrint the app can not see the printer.
    Regards .
    I worked on behalf of HP

  • HP LaserJet - network printer problem FIXED

    Hi,
    I'm aware this may not work for all, but I've sorted my own problems, which I suspect are common to many who still have a really solid HP (or other) network printer that was no longer available since Snow Leopard did away with Apple Talk.
    The answer is to do a cold reset on your printer, give it a new IP address, find this IP by printing a configuration page and enter this IP when you go to set up a new printer. In my case, it automatically found the correct drivers. The drivers were never the issue with vanishing printers; it was all about the network IP address. A quick search online and you will find how to do the cold reset and config page. For my 2100TN, it was a case of holding down the cancel button when powering up the printer until the lights flashed for a new IP, and to print, press both buttons.
    Hope this helps.

    Problem solved.
    I upgraded the printer's firmware which resolved the issue.
    Thanks anyway! :-)

Maybe you are looking for

  • Can't log in with my apple id on FaceTime for iPhone 5

    Keep getting error message tell me it can't log in to face time on iPhone 5

  • I think my iPod's hard drive is dead.

    Today I plugged in my disk-use enabled iPod to retrieve some game-saves i had backed up to it. Through copying them, it said: "Cannot copy [filename]. Parameter is incorrect.". I tried it repeatedly and with different files, resetting, rebooting and

  • Cannot upgrade from Solaris 10 U5 to Solaris 10 U8

    I have a V490 which has Solaris 10 U5 running on it, and has OBP 4.15.6. I also installed 2 qlc fiber channel HBA. Now, I want to upgrade it to Solaris 10 U8. However, I experienced some problem. When you boot from the internal hard drive, the OS rec

  • SAP Query download Problem

    Hi friends, we developed a query to download somedata, for the query output format we choose option FILE STORE  instead of ABAP LIST or List viewrs..... all the data is downloading properly but the problem is when the download data have some chinese

  • Kular not working in Flash cs4

    I am having trouble getting Kuler to load up when i start up in flash and my color connection,it keeps saying i need to activate Flash but i already have,i even deactivated Flash etc.,and still the same thing.It is saying my preferences don allow Kul