Network printer works wifi but iphone does not see printer

network printer works wifi but iphone 4 does not see printer

see if your printer is compatible http://support.apple.com/kb/ht4356
trouble shooting http://www.apple.com/support/iphone/assistant/airprint/

Similar Messages

I can AirPrint from my ipad but my iPhone does not see printer ? Connected to same network. Is there some setting on the phone I'm overlooking?

I can AirPrint from my ipad but my iPhone does not see printer ? Connected to same network. Is there some setting on the phone I'm overlooking?

Answered this question with a reply from "how does an iphone forget a network" response

Since upgrading my Macbook pro with Yosemite, I have problem with my Xerox Work Centre 3045 - the printer works normally but it does not recognise the scanner, can you help with this?

Since upgrading my Mac book pro with Yosemite, I have problems with my Xerox Work Centre 3045 printer. The printer works normally but it does not recognise scanner, I can not scan anything. Can you help?

Open Disk Utility and select your hard drive, then Repair Permissions, it will probably return a very large number of errors, primarily printer and library errors, so run it a second time. Then restart the MacBook Pro. If it still will not scan, try using Image Capture from Finder > Applications and see if that will work. If not, contact Xerox about updated drivers.

I purchased Label Printer Pro 7, but it does not work. It crashes. Please recommend an address/shipping label program that works with Avery labels. Thanks.

I purchased Label Printer Pro 7, but it does not work. It crashes. I press print, and the program closes. I press save, and the program closes. I press print and the program closes. I have had an email exchange with Pabel Printer Pro 7, but the best they could offer was to go to Utilities and click on fixed permssions. I have done that several times, and the program still doesn't work.
Can you please recommend an address.shipping label program that works with Avery labels that I can purchase, and that is also simple to use?
Thanks,
Paula

I purchased Label Printer Pro 7, but it does not work. It crashes. I press print, and the program closes. I press save, and the program closes. I press print and the program closes. I have had an email exchange with Pabel Printer Pro 7, but the best they could offer was to go to Utilities and click on fixed permssions. I have done that several times, and the program still doesn't work.
Can you please recommend an address.shipping label program that works with Avery labels that I can purchase, and that is also simple to use?
Thanks,
Paula

I have configured my android to connect to .me / cloud email. It works. But is does not do automatic email delivery. It seems to do fetch, not push. The settings are for imap. Can anybody tell me how to get push?

I have configured my android to connect to .me / cloud email. It works. But is does not do automatic email delivery. It seems to do fetch, not push. The settings are for imap. Can anybody tell me how to get push?

As Roger said, iCloud does not support external POP accounts.
However, you can configure your Max to directly receive your Yahoo! email by following these instructions:
http://hints.macworld.com/article.php?story=20110208153256491
Note that this works (for me) without a Yahoo Plus! account - and make sure that you scroll down to the comment at the end of the article which has all of the correct settings in one place.
Cheers,
Rodney

HT4628 My Wi-Fi connection on my iMac drops frequently. The other computers in the house do not have this problem. If I go into the Network Preferences and choose my Network it connects immediately but it does not remember the setting.

My Wi-Fi connection on my iMac drops frequently. The other computers in the house do not have this problem. If I go into the Network Preferences and choose my Network it connects immediately but it does not remember the setting and I must reselect my network frequently.

The iMac picks up a wireless signal from the back of the screen, so you would want to avoid having it close to a wall, or in a confined area where the wireless signal cannot easily reach the iMac's antenna.
We don't know how far the iMac is from your wireless router, or how many walls or other obstructions might be in the signal path that would limit the quality of signal that the iMac receives.
Nor do we know whether you might have a cordless phone near the iMac, or whether you may be using a wireless keyboard and/or mouse....all of which can interfere with the wireless signal.
Can you provide some more info on this?

Adding web fonts to Muze, but it does not "see" them

Hello, I am trying to add web fonts to Muze, but it does not "see" them. These are fonts purchased from Myfonts.com. No matter if do browse option or drag and drop in add web fonts, muse simply does not recognize the files. Yes. They have correct extensions.

Please check this document to verify if they are added properly to your system :
https://helpx.adobe.com/muse/using/typography.html#Working%20with%20Self-hosted%20web%20fo nts
Thanks,
Sanjit

I have my printer email address, but I can not see my printer listed when I login to hpeprint.com

I have my printer email address, but I can not see my printer listed when I login to hpeprint.com

I will need some more information in order to assist. What model of printer do you have? Different printers have different features such as the ability to display the printer's ePrint address on the front panel of the printer. The website that the printer can be viewed at is eprintcenter.com. Click on this link here to see the sign in page. Have you signed up and register the printer at this site? Is the email address for the printer one that you have customized? Or is one consisting of what appears to be random letters and numbers?
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

TS2662 I am trying to connect a wireless keyboard with a numeric pad to my (recent) iMac, but it does not see the numeric pad. Any advice?

I am trying to connect a wireless keyboard with a numeric pad to my (recent) iMac running Mountain Lion. I followed all recommendations in article http://support.apple.com/kb/TS3048#1. My computer recognises the alpha part, but it does not see the numeric pad. Any advice?

Hello:
I would try resetting the PRAM and SMC.
Barry

Iphone does not "see" network

friend visiting my daughter. her new iphone does not locate my daughter's wifi. my daughter is connected to it with mer macbook. the phone "sees" other networks in the areas. why not this one?
PS had her shut down phone and then turn it back on. no effect.
had her enter the network name in "Other," but it still could not locate it.

it is not hidden.
N (airport extreme base station)
other devices, including my iphone, have connected to this network recently. as noted, my daughter's macbook "sees" and is connected to the network.
the network is up and available.
the iphone can detect other networks in the vicinity, also detected by the macbook, but not the one located 20 feet away.
has to be something regarding that iphone, right?
device has been restarted.

The sim card has contacts , but the iPhone does not see them

The sim card has contacts, but iPhone 4s does not see them

Thanks, I did.Only it kepts the contacts in a different order.For example: Smith Home number . Before I found as a letter S. Now as letter H. Muddle

Printer sees wifi, Laptop sees wifi, but laptop doesn't see printer

I'm trying to connect my new LaserJet 100 color MFP M175nw all in one to my laptop. I've already set it up via USB on my desktop and that went off without a hitch. I got the printer on the wifi (I can print out a Network Summary and Config Report that list the printer's IP and specifically say it's connected to my network) but now I'm running into problems getting my laptop to "see" the printer. Each time I try to run the install, I get the "Can't Find Product(s)" message. I've got my firewall off and I've tried using the troubleshooting methods on the HP site but nothing seems to work.
I've tried manually adding a printer through Windows, but it's not able to find the printer by IP address or hostname.
Please help before I beat the nice new printer with a bat "Office Space"-style.
This question was solved.
View Solution.

It looks like we fixed it. This is what we did:
1) Installed the HP software via USB on the desktop
2)Confirmed that the printer was on the network by pressing the WPS button on the router and pressing holding the WiFi button on the printer for 2 seconds, then seeing a connection successfull message on the printer
3) Still on the desktop, added it as a wireless printer through Windows (Start > Devices and Printers)
4) Shared the printer with all users on the network
5) Switched to the laptop and used WIndows to add a printer. Once we shared the printer from the desktop, the laptop was able to see it.
I am going to go back and try connecting the laptop to the printer via USB to finish installing the scanning software etc. But I was able to print a doc wirelessly so I'm satisfied.

Cannot Wi-Fi Sync iPad; Appears to see iMac but iMac does not see the iPad

Like many, I have upgraded my iPad (1st Gen) to iOS 5 and for the most part, it's been an easy transistion to learn the new features. However, I've not been able to overcome a Wi-Fi Sync issue.
The iPad does recognize that it can Wi-Fi Sync with my iMac.
When it was connected via cable, I had already selected the "Sync with this [iOS device] over Wi-Fi" Option in iTunes then clicked "Apply."
Under Settings > General > iTunes Sync on my iPad, the "Sync Now" button is grey when I connect to an alternate Wi-Fi network in our house, but when I am on the same Wi-Fi network as my computer, through an Apple Airport Extreme Basestation, the "Sync Now" button becomes actively black as it if recognizes my iMac, but it does not show up under iTunes to sync.
I connected the iPad to an alternate computer which is linked to iPhone running iOS 5 on the alternate Wi-Fi Network I spoke of earlier and through which we succesfully Wi-Fi Synced, but when my iPad was linked to this same computer (connected first by cable to enable "Sync with this [iOS device] over Wi-Fi" Option in iTunes first, it still would not show my iPad. And this time, not even my iPad would see the computer when on the same network, yet I could also see the iPhone mentioned which was upstairs.
I have tried following the steps in this Help Page (http://support.apple.com/kb/TS4062) but without any change. The only thing I haven't followed to the letter is restarting my router. I did tell my Airport Basestation to restart via the Airport Utility.
Has anyone else yet experienced this issue and been able to resolve it? Please share any insight.

When one device can't see another via Bonjour, it suggests a problem with how the network or the devices are handling "multicast" packets. Handling multicasts is tricky on Wi-Fi. Is there any way you can temporarily plug the iMac into the LAN port of the base station via an Ethernet cable, and try the sync that way? If that works, then it's a clear indication of multicast problems on your network.
Apple is usually very good about making sure multicasts work reliably on AirPort base stations and all Macs and iOS client devices. It would be interesting to know which generation of AirPort Extreme you have, what firmware version you're running on it, exactly which wireless security mode you're using (for instance, WPA2 "mixed mode", where both WPA2-style AES-CCMP and original WPA-style TKIP encryption are available, is trickier for multicasts because multicasts have to use a different cipher and key. "WEP TSN" is also tricky for similar reasons). Oh, and what you have your "multicast rate" set to on your base station.

Rendezvous does not see printer

Hi,
One of the MACs sharing a usb printer on a AEBS network does not see the printer in Rendezvous. All the other computers printing through the AEBS can do so with no problems. OS is OS X 10.2.8.
Any suggestions are appreciated.
Ed

I'd be interested in seeing any responses here from others using a Mac running MacOS 10.2.8 to print via an Airport Extreme Base Station. It is my impression that firmware versions 5.5 and newer for the Airport Extreme Base Station have give many users of pre-MacOS 10.3 Macs problems with printing.

I am trying to import i frame from an SD90 video camera to iMovie, but it does not see the camera. Footage goes to i photo Why?

I am trying to import video ( i frame) from an sd90 ( listed for mac) but i movie does not see the camera. It imports into i photo. Is this normal ?

If you quit iPhoto and iMovie (with the camera still attached) then put the camera into VCR playback mode. Then launch iMovie and see if it can see the camera. If not, get out the power adapter for the camera and plug it into the wall, plug the camera into the power adapter. Reboot your Mac and wait for iPhoto to launch again automatically. Don't let it import the clips, just say No, quit the program. Then put the camrea int VCR/Playback mode, launch iMovie and check again to see if it can see the camera. Once iMovie sees it the first time it should be quicker to recognize it in future. But iPhoto does try to race in there and grab everything first.
To turn this off go to iPhoto Menu in iPhoto > Preferences > Look for Connecting camera opens: (click on the pulldown menu and choose No Application) This effectively turns off iPhoto when you first attach the camera. And it opens the way to iMovie recognizing it quicker.

Network printer works wifi but iphone does not see printer

Similar Messages

Maybe you are looking for