Network Problem From a N00b

hi, i am new in arch..
i installed succesfully and like this.. But can't connected the internet..
i am a standard dhcp user over eth0.. Which files should i edit?
i set eth0="dhcp" in /etc/rc.conf
when i enter "dhcpd" in terminal, get "no submask" or like this.. Can you copy here your /etc/dhcp.conf
Thanks

hmm.. i wasnt try this way.. Thanks..

Similar Messages

Networking problem from Mac running Leopard to Mac running Yosemite

I have a curious networking problem and I would love some suggestions about what might be causing the problem and how to cure it.
I have a PowerMac G5/1.8DP running Mac OS X 10.5.8 Leopard with a number of external drives attached that I use as backup for all my RAW files. These are mirrored on three drives.
When I mount the drives on my iMac desktop, running OS X 10.10.1 Yosemite, over a gigabit ethernet network, two things are happening - 1. some of the folders are invisible (although they are actually there and populated on the PowerMac) and 2. spurious, empty, folders with odd names appear on the Yosemite desktop.
I have checked on the PowerMac to see that the folders all contain files - they do - yet over the LAN they appear as empty folders with gobbledygook names. This happens on all my Macs running Yosemite so it appears to be a Yosemite problem, rather than a Leopard problem. To further reinforce that I have also checked the PowerMac from three other Macs, running Tiger and Leopard, and they can see exactly what is on the drives, with no missing folders or oddly named folders.
The images show 1. the folder as it appears on the PowerMac running OS X 10.5.8, with two folders RAW Files 26 and RAW Files 28 highlighted, 2. the same folder seen on the Yosemite desktop with two folders, RAW Files 26 and 28, missing and 3. the same folder on Yosemite with three oddly named empty folders.
I am at a loss to know how to cure it and hope that someone will be able to help.

You can never, never, never transfer any installed version of PSE on any platform. You must always install from scratch on a new machine. By trying to do so you have made more work for yourself. You will need to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
which will not seem to do anything, but is a necessary step to break the links within the program. Then you can go around and manually remove everything related to PSE that you can find, not only from Applications, but also from your username>library>preferences and the library at the top level of your hard drive>application support>adobe. You must go to these locations manually; spotlight will not help you with this type of search.
Then you can reinstall from your original media or from the download here:
Download Photoshop Elements products | 13, 12, 11, 10

What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

This past month I have been having problems connecting to my home wireless connection. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of server

This past month I have been having problems connecting to my home wireless connection. I have a MacBook Pro OSX Version 10.6.8. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of servers and trying to reconnect this way. These methods have worked temporarily, but the same problem keeps coming back. Most of the time my personal wireless connection does not even come up among the list of available networks. My fellow flatmates have PCs and both of them are able to connect to the network without problem.
The router is a d-link model DIR-615. I am not tech savy, so if any other information need to be provided in order to better understand my situation, please let me know.
Please help me!

If I open the list of networks in a window it says "connection timeout," but if I just select it from the drop down it tries for awhile and then stops with no prompt. When I try to run network diagnostics it says "sorry, we can't connect to the internet" (or some solution-free variation of that)

Network problems are preventing connection to Exchange when changing from Ethernet to Wifi

I have a user that connects to Exchange fine while their computer is docked and connected to the LAN by Ethernet, but once they undock they receive the error "Cannot open item. Network problems are preventing connection to Exchange server." They
are connected to the internal company Wi-Fi and nothing changes about their computer's status other than changing from being on the wired network to wireless.

Hi,
What's your Outlook version and Exchange version? Outlook 2007 or Outlook 2010/2013? Please check your Wifi settings and make sure your Wifi password is correct.
In Outlook, please click File > Account Settings > Security and
make sure the Encrypt data between Microsoft
Outlook and Microsoft Exchange is checked.
Regards,
Winnie Liang
TechNet Community Support

HT4407 Is there any way to download these files manually from another source? The download from boot camp keeps stopping at around 25% and then produces the error "Can't download Windows Support Software because of a network problem". Thx!

Is there any way to download these files manually from another source? The download from boot camp keeps stopping at around 25% and then produces the error "Can't download Windows Support Software because of a network problem". Thx!

No. This issue is dicussed here frequently. The only option is to be patient and try often. Search this forum for other posts about this issue.

I have got an iphone4 from london as a gift but its nt wrking here in belgium beacause of network problems..!!! wat should i do??

I have got an iphone4 from london as a gift but its nt working here in belgium bacause of some network problems!! could you please tell wat should i do ??

You mean you hacked the phone in Belgium. I don't get it, you can purchase unlocked iPhones in Belgium but rather than do that you hack an iPhone from the UK(where unlocked iPhones are also available). Whatever...you're on your own. Good luck.

3gs no service after updating to ios 5 tried network reset, reset all settings and even restoring from back been with out phone for 3 weeks now need help telus cant find network problem and apple has bad customer support please help!!!

my 3gs has no service after updating from ios 5 tried resetting network settings, resetting all settings and restoring from back up on itunes.
telus cant find any network problems and apple is difficult to deal with.please help 3 weeks with no phone and $70 a month not happy.

I have been having a similar problem for the last few days.Without warning the signal will just completely duck out leaving the device searching for several minutes before settling on a no signal message.
Sometimes restarting the device, toggling data and 3g settings or toggling Airplane Mode will set things right. However, a lot of the time I've been left without a working phone.
I don't believe this is a SIM issue, as I had to change my SIM only one month ago for another signal related problem. Again any help would be appreciated here as well.

Unable To See Network Drive from outside Home Network..even when using DynDNS

Hi
I have just got a Freecom Media storage Network Center which I have attached to my WRT150N router.
I am attemting to permit access to authorised users to files on the drive via the internet (presumably via ftp).
Here is what I have done:
Swiitched on DynDNS on the web admin page in the router (used DynDNS.com free service.
Obtained a user addess which is middle-earth.dyndns-home.com from DynDNS, which is linked to my Virgin Media IP
Switched on Port Range forwarding with
Ports 20-21 as ftp
Port 80 as http
Port 57 as DNS
Selected "both protocols"
Set the IP address to route to 192.168.1.42 - (this is the IP address which the web based software for the Network Drive reports as.
However the configuration of the TCP/IP protocol in PC attached by LAN cable to the router is "Obtain an IP address automatically" (i.e. dynamic?). If I change these settings and specify static IP addresses   will I not muck up internet connection to Virgin Media.
what I was hoping to acheive was typing     ftp:// middle-earth.dyndns-home.com
in the address bar would let me see the network drive from anywhere!
I have tried using DNS pinging on Ports 20, and 21 but that tells my ports are closed. i have also tried switching off my software firewall (Kaspersky) and the router firewall, but this does nothing.
What have I done wrong or no done!!
Thanks

I think the problem is solved.
The Freecom device needs to use a different part of its interface to be assigned a static IP address, which I have now done. At my last try it was visible from two independent views outside of my network.
On another front, I am appalled at Linksys or Cisco, who are not prepared to advice on getting more from their produicts if they are 'out of warranty'. The online chat tech said I could ring an 0871 premium line number in the UK. When I rang that, I was told as tthat as my unit is not faulty and was out of warranty I would have to use their pay per incident service.
That is not a way to deal with customers. When it comes to upgrading or replacing network equipment, I will look to a provider who is interested in their customers.

Odd Network Problem

Hi,
I have a strange network problem, can anybody help?
Basic configuration
I have three networks 10.190.0.0, 10.192.0.0 and 10.193.0.0 joined by a single server running Solaris 11 B64a with a dual port intel card and onboard intel card (e1000g0/g1/g2) each port is plugged into the gigabit port of a seperate Dell powerconnect switch.
they have ip addresses of 10.190.0.2, 10.192.0.1 and 10.193.0.1
The problem. I have connected from a remote machine through a solaris router machine on the 10.190.0.0 network to a computer on the 10.192.0.0 network (Beyond a switch).
The terminal works fine!
if I ping the 10.190.0.1 which is the other router beyond the box with the three network interfaces packets are not seen by the pinging box. However, if I snoop the interface on the three interface router I see both the ICMP echo requests and replies.
After a considerable length of time 10-30 seconds, a load of the packets suddenly appear on the pinging machine and then continue normally.
I would like to understand:
a) where were the packets during the time between the snoop seeing them leave and them arriving at the destination?
b) why does the terminal not suffer any delays?
We are suffering with a lot of strange network issues at this new site and I am trying to figure out if its the new dell switches, the solaris network stack or something else entirely!
Anybody got any idea whats going on?
Please Help I am baffled.

It may just be the pinging machine has received the packets, but it will not display them on screen until it has found a name for the remote IP address (or until it times out waiting for one).
Do you get the same behavior with 'ping -n' ?
Darren

Communication problem from the vpn-anyconnect to easy-vpn-remote

Hi Team,
I have a communication problem from the vpn-anyconnect to easy-vpn-remote, I´ll explain better bellow and see the attached
topology:
1) VPN Tunnel between HQ to Branch Office - That´s OK
2) VPN Tunnel between Client AnyConnect to HQ - That´s OK
The idea is that the Client Anyconnect is to reach the LAN at Branch Office, but did not reach.
The communication is stablished just when I start a session (icmp and/or rdp) from Branch Office to the Client AnyConnect,
in this way, the communication is OK, but just during a few minutes.
Could you help me?
Bellow the IOS version and configurations
ASA5505 Version 8.4(7)23 (headquarters)
ASA5505 Version 8.4(7)23 (Branch)
**************** Configuration Easy VPN Server (HQ) ****************
crypto dynamic-map DYNAMIC-MAP 5 set ikev1 transform-set ESP-AES-256-SHA
crypto map outside-link-2_map 1 ipsec-isakmp dynamic DYNAMIC-MAP
crypto map outside-link-2_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside-link-2_map interface outside-link-2
access-list ACL_EZVPN standard permit 10.0.0.0 255.255.255.0
access-list ACL_EZVPN standard permit 192.168.1.0 255.255.255.0
access-list ACL_EZVPN standard permit 192.168.50.0 255.255.255.0
access-list ACL_EZVPN standard permit 10.10.0.0 255.255.255.0
group-policy EZVPN_GP internal
group-policy EZVPN_GP attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list value ACL_EZVPN
nem enable
tunnel-group EZVPN_TG type remote-access
tunnel-group EZVPN_TG general-attributes
default-group-policy EZVPN_GP
tunnel-group EZVPN_TG ipsec-attributes
ikev1 pre-shared-key *****
object-group network Obj_VPN_anyconnect-local
network-object 192.168.1.0 255.255.255.0
network-object 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
network-object 192.168.50.0 255.255.255.0
object-group network NAT_EZVPN_Source
network-object 192.168.1.0 255.255.255.0
network-object 10.10.0.0 255.255.255.0
object-group network NAT_EZVPN_Destination
network-object 10.0.0.0 255.255.255.0
nat (inside,outside-link-2) source static Obj_VPN_anyconnect-local Obj_VPN_anyconnect-local destination static Obj-VPN-
anyconnect-remote Obj-VPN-anyconnect-remote no-proxy-arp route-lookup
nat (inside,outside-link-2) source static NAT_EZVPN_Source NAT_EZVPN_Source destination static NAT_EZVPN_Destination
NAT_EZVPN_Destination no-proxy-arp route-lookup
nat (outside-link-2,outside-link-2) source static Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote destination static
NAT_EZVPN_Destination NAT_EZVPN_Destination no-proxy-arp route-lookup
**************** Configuration VPN AnyConnect (HQ) ****************
webvpn
enable outside-link-2
default-idle-timeout 60
anyconnect-essentials
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
anyconnect profiles Remote_Connection_for_TS_Users disk0:/remote_connection_for_ts_users.xml
anyconnect enable
tunnel-group-list enable
access-list split-tunnel standard permit 192.168.1.0 255.255.255.0
access-list split-tunnel standard permit 192.168.15.0 255.255.255.0
access-list split-tunnel standard permit 10.0.0.0 255.255.255.0
group-policy clientgroup internal
group-policy clientgroup attributes
wins-server none
dns-server value 192.168.1.41
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
default-domain value ipconnection.com.br
webvpn
anyconnect keep-installer installed
anyconnect ssl rekey time 30
anyconnect ssl rekey method ssl
anyconnect profiles value Remote_Connection_for_TS_Users type user
anyconnect ask none default anyconnect
tunnel-group sslgroup type remote-access
tunnel-group sslgroup general-attributes
address-pool vpnpool
authentication-server-group DC03
default-group-policy clientgroup
tunnel-group sslgroup webvpn-attributes
group-alias IPConnection-vpn-anyconnect enable
object-group network Obj_VPN_anyconnect-local
network-object 192.168.1.0 255.255.255.0
network-object 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
network-object 192.168.50.0 255.255.255.0
object-group network NAT_EZVPN_Source
network-object 192.168.1.0 255.255.255.0
network-object 10.10.0.0 255.255.255.0
object-group network NAT_EZVPN_Destination
network-object 10.0.0.0 255.255.255.0
nat (inside,outside-link-2) source static Obj_VPN_anyconnect-local Obj_VPN_anyconnect-local destination static Obj-VPN-
anyconnect-remote Obj-VPN-anyconnect-remote no-proxy-arp route-lookup
nat (inside,outside-link-2) source static NAT_EZVPN_Source NAT_EZVPN_Source destination static NAT_EZVPN_Destination
NAT_EZVPN_Destination no-proxy-arp route-lookup
nat (outside-link-2,outside-link-2) source static Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote destination static
NAT_EZVPN_Destination NAT_EZVPN_Destination no-proxy-arp route-lookup

Hi,
the communication works when you send traffic from easyvpn branch side because it froms the IPSEC SA for local subnet and anyconnect HQ pool. The SA will only form when branch initiates the connection as this is dynamic peer connection to HQ ASA.
when there no SA between branch and HQ for this traffic, HQ ASA has no clue about where to send the traffic from anyconnect to branch network.
I hope it explains the cause.
Regards,
Abaji.

Mobile network problem in my lumia 520

Once network gone, I have to Restart it then again mobile network come.calling proble occurs many times even network is dispayed. Network problem sshould be rectify.

Hi mbkrish,
Do you experience the network issue regardless of your area? Aside from calling, are the other network services working fine like SMS messaging and mobile data connection? Is this for a Lumia 520 as well? If so, I hope you're using a standard microSIM and not a cut one as this is what the phone is designed to use.
BTW, the reset that the Nokia Care Center recommended is the one under Settings > about, is that right? After the reset, have you checked if the system apps are updated? Go to Settings > swipe to applications > store > check for updates.
Let us know how it will go.

Time Machine and Time Capsule - Failing with Network Problem

My problems with TM/TC have been ongoing for a couple of months now and I am going round in circles - need help.
This is the second post I have made, the first got lost in people suggesting the obvious - so I will try to be a little more specific if I can.
I will detail the current state first - i.e. where I am now - after I will list what I have done so far to get to this point.
Currently, my iMac (intel) is directly connected by Ethernet 1GB to the Time Capsule. The TC is then connected to a Netgear router which in turn is connected to Internet.
I have no network problems at all - internet connection is fine. the Netgear Router has the latest firmware version and is working fine. The porblems i have are nothing to do with this.
The time Capsule is in Bridge mode and getting a reserved dhcp IP address from the Netgear router.
The Time Capsule has been fully reset - i.e. power cable out, hold the reset button, plug in power cable (spark, spark), hold reset button, fast blink for 20 seconds or so, light goes out, release button.
I have re-applied the latest Time Capsule firmware.
I have renamed the disk on the Time Capsule.
I have renamed my iMac and deleted all the time capsule entries from Keychain.
I have re-installed Mac OSX and re-updated to the latest 10.5.6 release.
At the moment I have kicked off a backup with a lot of large files - like music folder, video folder etc excluded. I also have parallels and have excluded the disk image. I have 1 other 50GB disk image which is also excluded.
I am expecting the first initial backup will complete successfully.
I will then remove music and video from exclusions and allow them to backup. I am expecting this will complete no problem. (I do this because the upcoming problem will happen if I move away from the machine - and I dont want to sit there for 2 days).
So up to this point TM and TC have performed flawlessly. The issue that follows started happening before the 10.5.6 update after backing up with no issues for months. At this point I will be able to use TM to browse the backup and restore files. I will be able to mount the sparse bundle and browse files. Spotlight reports no issues and indexes quickly.
If I leave my machine after a successful backup and the hourly update kicks in it will fail with 'A Network problem' basically saying the backup has filed because of a network problem, but is not any more specific, logs show far too much to put the whole thing here, but the following is an excerpt
Dec 23 05:19:49 MickMac /System/Library/CoreServices/backupd[1499]: Backup destination mounted at path: /Volumes/Backup
Dec 23 05:19:50 MickMac hdiejectd[1519]: running
Dec 23 05:19:51 MickMac kernel[0]: jnl: disk1s2: replay_journal: from: 28864512 to: 30084096 (joffset 0x1d0f000)
Dec 23 05:21:49 MickMac kernel[0]: jnl: disk1s2: journal replay done.
Dec 23 05:21:49 MickMac /System/Library/CoreServices/backupd[1499]: Disk image /Volumes/Backup/MickMac_001ec215ce76.sparsebundle mounted at: /Volumes/Backup of MickMac
Dec 23 05:21:49 MickMac /System/Library/CoreServices/backupd[1499]: Backing up to: /Volumes/Backup of MickMac/Backups.backupdb
Dec 23 05:21:49 MickMac com.apple.launchd[1] (com.apple.netauth.sysagent[1500]): Stray process with PGID equal to this dead job: PID 1503 PPID 1 check_afp
Dec 23 05:21:55 MickMac fseventsd[38]: event logs in /Volumes/Backup of MickMac/.fseventsd out of sync with volume. destroying old logs. (3627 125 5482)
Dec 23 05:27:33 MickMac /usr/sbin/ocspd[1539]: starting
Dec 23 05:30:27 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 5 reqID 5400 flags 0x9 afpCmd 34 so 0x7e78cc0
Dec 23 05:30:27 MickMac kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x7e78cc0
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Backup prevTrigger 0 currTrigger 1
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot -1 error 89 reqID 1 flags 0x9 afpCmd 0 so 0x7e78cc0
Dec 23 05:31:26 MickMac KernelEventAgent[34]: tid 00000000 received VQ_DEAD event (32)
Dec 23 05:31:26 MickMac KernelEventAgent[34]: tid 00000000 type 'afpfs', mounted on '/Volumes/Backup', from 'afp_0V1fqC1mgalO00mE1H0Pyetl-1.2d00000a', dead
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Open Session failed 57 /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: max reconnect time reached 60 > 30 /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: posting to KEAType IO] [ErrNo 5] [IOType Read] [PBlkNum 1248] [LBlkNum 155] [FSLogMsgID 501572642] [FSLogMsgOrder First]
Dec 23 05:31:26 MickMac kernel[0]:
Dec 23 05:31:26 MickMac fseventsd[38]: failed to unlink old log file /Volumes/Backup of MickMac/.fseventsd/0000000000ccb02b (Input/output error)
Dec 23 05:31:26 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED)."
It goes on and on and is repeated every hour. For each one I get an error message on screen saying backup failed due to a network error. However I have tried a manual download over the same period set at an extremely slow rate so that it was downloading during this time and it showed no errors. I.e. the network connection from imac, through TC to netgear and out to internet - and monitored this while time machine showed these errors (i.e. at the same time) and this showed no connection problems at all and completed succesfully.
I know TM uses an internal address to do backups, but uses the same cable and network card to get the job done. I am simply removing the cable as a source of issue although I have also replaced this making no difference.
Applecare are involved and have so far been sent 2 sets of logs and so far have not been able to find the cause. New TC is on its way to try that, although they think it is something on the imac that is causing this.
Sleep mode is turned off although screen sleep is on. The tick is not in the box for putting hard drives to sleep whenever possible.
Now, after this has happened, and back at the machine. I restart both imac and TC. Try running a backup, spotlight starts to re-index - i.e. will mount the backup volume and start the index process, gets to about 90% then fails - again excerpts from log
"Dec 23 09:18:50 MickMac /System/Library/CoreServices/backupd[161]: Backing up to: /Volumes/Backup of MickMac/Backups.backupdb
Dec 23 09:18:50 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexCI in ContentIndexOpenBulk:Unclean shutdown of /Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/li ve.0.; needs recovery
Dec 23 09:18:57 MickMac com.apple.launchd[67] (com.apple.netauth.useragent[147]): Stray process with PGID equal to this dead job: PID 152 PPID 1 check_afp
Dec 23 09:19:48 MickMac mds[32]: (Error) Server: machmsgdispatch: (ipc/send) invalid destination port [msgh_id 14016]
Dec 23 09:29:35 MickMac /usr/sbin/ocspd[197]: starting
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 11 reqID 3204 flags 0x9 afpCmd 60 so 0x8051b28
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 12 reqID 3205 flags 0x9 afpCmd 34 so 0x8051b28
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x8051b28
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Backup prevTrigger 0 currTrigger 1
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Logging in with uam 10 /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Restoring session /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot 11 error 35 reqID 3204 flags 0x19 afpCmd 60 so 0x8051b28
Dec 23 09:42:49 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot 12 error 35 reqID 3205 flags 0x19 afpCmd 34 so 0x8051b28"
And later....
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x39 (UNDEFINED).
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 received VQ_DEAD event (32)
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: hfs_clonefile: cluster_read failed - 5
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 type 'afpfs', mounted on '/Volumes/Backup', from 'afp_0V1fqC1mgalO00mE1H0Pyetl-1.2d000005', dead
Dec 23 09:45:49 MickMac kernel[0]: HFS resolvelink: can't find iNode791959
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x39 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]: ore-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431/store.db] [FSLogMsgID 1580919258] [FSLogMsgOrder Last]
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 found 1 filesystem(s) with problem(s)
Dec 23 09:45:49 MickMac kernel[0]: jnl: disk1s2: dojnlio: strategy err 0x5
Dec 23 09:45:49 MickMac kernel[0]: jnl: disk1s2: end_transaction: only wrote 0 of 49664 bytes to the journal!
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexSDB in dbcheckdatastore:store.db : dbgetdatastore: ERR: could not read 4096 bytes
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexCI in CIMetaInfoSync:write err: 5
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexSDB in adddirtychunk:/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/st ore.db : ERR: Can't write DST header (Input/output error)
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexSDB in dbflushdatastore:/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/st ore.db : dbsyncdatastore: write-errors flushing cache/writing map.
Am I the only one having these problems? any help from anybody please...

Got the same problem with a 3 months old TC.
The replacement TC, does it work now flawless?

File sharing network problem

I have an Airport Extreme (G) base station with an Airport Express acting as a WDS extender. I have two client Macs - a 24" iMac (Intel Dual Core) and an iBook (G4). There are a variety of other clients as well - 2 wireless-G tivos, a Win XP laptop, a wireless ethernet bridge serving a slingbox.
My problem is with the two Macs. Using Network browser, from the iMac, I can connect to the iBook just fine via AFP. However, when I try to connect to the iMac from the iBook, it tries to use FTP, then I get the error "unable to find alias." Both macs have AppleTalk enabled and both have File Sharing enabled.
I suspect that the root of the problem may be from the fact that the iMac was set up by copying everything over from an older iMac FP (I've learned my lesson and will not use the Migration Assistant again!). But, I can't figure out how to correct this.
Thanks!

Hi franki, I'm glad those web sites were useful.
Unfortunately I can't advise about your remaining problem because I don't have a suitable Windows computer to try things out on. Maybe somebody else here can.
I'd suggest you give a few more details about exactly how far you get and at which point things get stuck.
Also, if nobody on this board can help then you could try another one. There are several boards here related to networking, of which the Tiger Forums Getting Online & Networking one seems to be the most lively.
MacBook (OS 10.4.8) iMac G4 (OS 10.3.9)

Screen Sharing/network problem seems confined to 1 volume. What's the fix?

I am having a networking problem on one of the volumes of my multi-volumed, three-Mac local area network, and I need a networking guru to identify the specific software file(s), application(s), or system configuration that is the cause of the problem. I have already spent several hours checking and re-checking the various hardware and system preference settings involved, and I have narrowed the problem down to a software corruption issue and/or system configuration issue on one volume.
I now need someone to identify specifically what the nature of the problem is, and how to eliminate it. I am not looking for a sledgehammer solution that says I should re-install all of the Mac OS X software on the problem volume. That may be held in reserve as a last resort. I'm looking for a more elegant approach, one that points out the specific corrupt files to remove without disturbing everything else.
Here's some background to set the context. I have a MacBook Pro laptop; a PowerMac iMac G5; and a PowerMac G4 hooked up in a network. All are running Leopard 10.5.8. All have file sharing and screen sharing enabled. Besides being able to connect to each other using registered users, my goal here is for each of the Macs to be able to share the screen of the others upon my demand. Since each of the 3 Macs can theoretically share the screens of the other 2, that makes a total of six possible connections. Five succeed; one does not. That's the problem. I am trying to determine why the iMac G5 cannot share the screen of the MacBook Pro.
The iMac G5 has no problem sharing the screen of the PowerMac G4. That connection is fast and immediate. But, every time that I hit the Share Screen button on the iMac G5 to try to connect to the MacBook Pro, I get a window with the blue barber pole spinning for two or three minutes as it is allegedly "Connecting to Mac Book Pro," followed by a window with a headline telling me that "Connection Failed to MacBook Pro." The text within that window goes on to say: "Please make sure that Screen Sharing (in the Sharing section of System Preferences) is enabled on the computer to which you are attempting to connect. Also make sure that your network connection is working properly."
Well, as I indicated, the PowerMac G4 has no problem sharing the screen of the MacBook Pro, so the Screen Sharing settings on the laptop are correct; and the iMac G5 can share the screen of the PowerMac G4, so its network connection is working properly in that regard. It is only in regards to sharing the screen of the MacBook Pro that the iMac G5 is not working properly.
The reason why I say that the issue must be unique to the one volume in question, let's call it "iMacG5 Music," is that another Leopard volume on the same computer has no problem whatsoever in sharing the screen of the MacBook Pro. Whenever I boot up in that volume, let's call it "iMacG5 JMB," it makes a network connection with a registered user name immediately, and it is able to share the screen of the MacBook Pro within a second of my issuing the command. In sharp contrast to the success of the iMacG5 JMB volume, the iMacG5 Music is unacceptably slow (several minutes slow!) in making a network connection with the MacBook Pro, and it always fails to share the screen of the MacBook Pro, preferring instead to take about three minutes to attempt the connection, before announcing its failure.
Since the iMacG5 Music volume makes an immediate network connection to the PowerMac G4, as well as sharing the screen of the PowerMac G4 the moment I ask it to, I have concluded that the hardware of the iMac G5 is just fine. The problem seems confined to the system software and/or associated networking files that are unique to the iMacG5 Music volume. I just don't know what those files could be, or where the problem lies, so I've issued this call for help.
Let me add one more little twist to this puzzle which baffles me even more. I use external LaCie Firewire drives as clone backups of my Macs. As part of my trouble-shooting process, I booted up from the cloned versions of the iMacG5 JMB volume and the iMacG5 Music volume. What I learned surprised me!
The iMacG5 JMB clone worked just fine in making a fast network connection to the MacBook Pro, as well as sharing the screen of the MacBook Pro. I expected that. What I did not expect was that the iMacG5 Music clone was also able to make a fast network to the MacBook Pro, as well as share its screen!
Yes, that's right. It's weird! Screen sharing works OK when I start-up from the clone of the iMacG5 Music volume, but it does not succeed when I boot up on the source itself! I was surprised to find that out, but I'm glad I did.
(Over the past few days since I executed the last clone, I did use Drive Genius to de-frag the source volume, and maybe that has contributed to the problem I am now encountering. But it's hard to say, since nothing else seems to be amiss.)
One solution, I suppose, would be to sync the clone back to the source. But, before I do that, I'm just wondering if anyone has a clue as to the nature of this problem on the source volume and what I might do to remedy it—short of re-installing the system software or restoring from the clone. Anyone have any insight to this problem?

CORRECTION #2:
Ignore the previous "CORRECTION" post.
Oops, excuse me, I wrote that sentence correctly the first time.
I was trying to point out that the ability of the iMac G5 computer to connect quickly and effectively to the PowerMac G4 when booted up into the iMacG5 Music volume was an indication (to me, anyway) that there is nothing wrong with the computer's hardware, nor its network connection ability, but that the problem lay somewhere in the files/settings used to connect to the MacBook Pro, which it cannot accomplish.
This is what happens when I get engrossed in one of these technical morasses and it ***** me into its vortex all through the night... time for bed.

Network Problem From a N00b

Similar Messages

Maybe you are looking for