Network problem when update ios 5.1.1
hi,
I am in big problem with my iphone 4, when upgrade in ios 5.1.1 then my operator's network some times showing and sometimes not showing. Also notice that if the network bars is full but it is not working.
Please help me with some advise at [email protected] .
Reset network settings and see if it solves the issue.
SETTINGS - GENERAL - RESET - RESET NETWORK SETTINGS
If it doesn't, try basic troubleshooting steps in order.
1) Turn your phone OFF and ON again.
2) Perform phone reset.
3) Restore from a backup.
4) Restore and setup as new.
Similar Messages
-
Network error when updating ios 4 to ios 7 on ipad 2 through itunes.
I tried using two different computers in two different houses. However both houses have same ISP.
I have tried restore and then update again.Error 2
ASR does not exist on ramdisk or is corrupt/not signed.
you might be downloading the wrong version of iOS 7.0 or downloaded file might be corrupted , try to download again the correct and complete file and retry restoring manually ...
while in itunes press shift and restore button you will be asked to provide the iOS which you wan to update select and see if this works for you. -
Problem when update ios 6 on factory unlocked iphone 4 s
HELLO after instal IOS 6 the phone UNLOCKED dont read the SIM
There is no SIM card installed in the iPhone you are attempting to activateIs the SIM operating. Try taking it out and putting in again. Also try with a diffrent iPhone. Are you SURE your iPhone is unlocked? HOW did you unlock it? There is no such thing as a "factory unlock" on the iPhone.
-
I have a problem when updating applications on iOS 7.0.2
I have a problem when updating apps on iOS 7.0.2 to go to the appstore I get the update but only tells me open, not update, I have to uninstall and reinstall te app and gives me the option to update. Sorry my bad english
I am in the process of installing 9i on SUSE Linux 7.2. The only Linux that is certified to run 9i. The machine is is a fresh install of SUSE. I am running into the same problem. I ran through the first make problem by going to a shell and invoking a make -f oemagent.mk. Built the library just fine. Got errors when trying to run make -f ins_rdbms.mk. Not sure why the installer or the command line is having problems.
Not sure if I can just hit Ignore and go on????
Any help would be appreciated. You would think 9i would spread like butter on their "Certified" platform. -
what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?
SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.
-
i have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!.
one more question when i phone5 update with iOS 8.1.2 this iOS supported iphone5???Hi Ios 8.1.2 Should work on iPhone 4s / 5 You may have a bug Backup to cloud over WiFi Then Restore back to Factory Settings This will make iPhone as new. Use same Apple ID & you will get your Apps & Data back Do Restore over your WiFi. Cheers Brian
-
my iphone 4s wifi and bluetooth problem after updating ios 8? please help me...
Hey there Abdulrahim0259,
I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
And:
iOS: Troubleshooting Bluetooth connections - Apple Support
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions?
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
Errors related to downgrading iOS -
I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.
If you have no photos:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
Regards
TD -
Hlep.. Problem when updating aspx templates
Hi there, I-m having a huge problem when updating pages from
a .asp template, it replaces my 1 line of code
with <%@ Page Language="VB" ContentType="text/html"
ResponseEncoding="iso-8859-1" %> and errases the resto of the
attributes i have on each page, making it unfunctionable.
Does anyne know why the template when updating does that?
thanks for your helpHi Suman,
The changes are getting lost when i logout and login back to SAP.
In Current session i am able to see the changes. But changes are lost as soon as i end up my session,
but this is happening only in case of template box width. All other changes are retained between my various SAP sessions.
So wanted to know if any other value is over-writing the template box width values.
Regards
Manpreet Singh -
I have problem when update to belle the folder of ...
I have problem when update to belle the folder of games disappear?? c7
I need to solve ??? PlusDo you mean that pink folder w/ the controller icon on it? I lost that too on my N8. Actually, lost all of the folders that came with Anna like Applications & Music. Wish I could get them back as now I can only make the generic yellow folder which isn't as aesthetically appeasing.
However, reading articles on Belle there was a picture of a Belle N8 with the games folder shortcut on the homescreen - so maybe it still exists & I just cannot find it.
Good luck & I'll let you know if I figure this out. -
Validation problem when update a row in OAF
created a application using OAF. No problem to create a row, when tried to update the row, received the following error message:
oracle.jbo.RowValException: JBO-27012: Row validation method validation() failed for row with key oracle.jbo.Key
2) Steps to Reproduce
select a row from search result page for update, after change the value and apply it, received the following error message:
oracle.jbo.RowValException: JBO-27012: Row validation method validation() failed for row with key oracle.jbo.Keyyes. it is the EO based VO page. Create and Update used same VO and no problem to create the row, had problem when update the row.
-
I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW025, DW050 ... WARNING: DW024, DW025 ..., please advice me the step to re-install the Pro-X. Thanks
Please follow Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
Do let us know if it worked.
Regards
Rajshree -
there was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable
YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
IPad3 gets stuck in acceptance dialogue box when update iOs 8.1 software
iPad3 gets stuck in acceptance dialogue box when update iOs 8.1 software
software is downloaded but doesn't install; how to solve this?Hello soccerlime,
Thanks for using Apple Support Communities.
The error code "9006" in iTunes when updating or restoring your device indicates that access to the iTunes update servers is being blocked. Please take a look at the information below to help resolve this error.
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Resolve iOS update and restore errors
Take care,
Alex H.
Maybe you are looking for
-
is there any way to retrieve photos off of my phone after it was submerged in water? An apple icon appears on the screen but the phone will not respond
-
How do I duplicate a pdf document in the cloud?
How do I duplicate a pdf document in the cloud?
-
Problem when installing eclipse,plz help me...
my java version is 1.4.0_01, but when i tried to install MyEclipse Enterprise Workbench 5.1.0 GA it's giving you need jvm1.4.1 are above.. Message was edited by: satyab
-
The Stop button does not show except when I'm customizing settings
I have just upgraded from FF 3.6 to FF 8. The Stop button (X) does not appear between the Reload and Home buttons. However, if I right click the menu bar and select Customize... , the X appears as it should, then disappears again when I close the Cus
-
Address already in use: make_sock
Hi folks, I am getting an error with iAS 10.1.2.0.2. When it happens I cannot connect to my httpd server. The error log shows errors like [Tue Nov 28 05:11:24 2006] [crit] (98)Address already in use: make_sock: could not bind to address 127.0.0.1 por