Network problems with MSI 790FX-GD70

Hi All
I have a problem with the onboard network cards.
It only works the first time from cold boot (when the powercable is completly disconnected from the PC, and LAN cable disconnected, turn on PC and then connect LAN cable)
If I shut it it down or restart the computer, then the LAN card disconnects, eg no lights active on either the pc nor the router. But if I do the procedure described above everything works ok again.
Same problem occours with both LAN ports.
My system:
MSI 790FX-GD70
AMD 720BE
4GB Corsair 1600mhz DDR3
2x Asus HD4850 Crossfire
2x Samsung t166 320GB HD
Windows XP SP3
Tried 3 different routers but all with the same error. So everything points towards the motherboard.
Please help.
PearsonDK

Quote from: Fredrik on 09-August-09, 06:19:22
If the LAN-card is disconnected I wonder if the LAN-card is "present" at all. Check Deceive Manager. Please give some PSU info. Problematic booting and falling out devices...
Also, please, what is your BIOS Version? Make sure its 1.4 .
Drivers - have you downloaded the latest ones from MSI's site and installed them for the LAN card?
Man.. is it me, or have there been like 6-7 people coming up with similar LAN issues on this board? I've never known an onboard NIC to have issues.

Similar Messages

[Solved] Network problems with MSI GX60 Destroyer, killer newtork LAN and wireless

Hi, I bought a MSI GX60 Destroyer 2 weeks ago, and I realized that my internet was a little slow, you don't realize in the web but when downloading it doesn't perform how it should, I tested the speed now with wireless and I got 5 mb/s, and I have 20 mb/s in my house (I also tested with cellphones and other pc's), with LAN the speed was normal, so I saw some forums about the Killer network, I tried to change the drivers but nothing, the wireless is limited to 5 mb/s and now my LAN too.... please help, my phone has 4x better internet than my GAMING Laptop.
Also the Atheros drivers are a pain in the ass it's really hard to remove them.
I'm now with the drivers without the Management app.

Quote from: hch;109858
Hi Tzin,
Which graphics driver are you using?
The quick stream is installed on the notebook with the generic graphics driver from the AMD website.
If you install the AMD's generic graphics driver, you'll find the quick stream program in your Uninstall programs window.(Control Panel> Uninstall a program)
Hi hch , i only can find the "amd cystal manager " under the unintall a program , so when i click into in then only saw the device but dont see the quick stream .

MSI 790FX-GD70 Overclocking Major Issue

Hi guys, I recently purchased the AMD Phenom II X4 955 Black Edition and the MSI 790FX-GD70 motherboard. My current bios version is the v1.1, and it came together with the motherboard.
In Windows, I am easily able to go to from 3.2Ghz to 3.8Ghz by increasing the stock voltage to 1.43V and the multiplier to 18 - 18.5. This is using AMD Overdrive. Stablity tests show everything is good.
After starting windows and implementing these settings into the bios, I realised that whenever I changed the multiplier in the BIOS, (CPU Ratio), the bios ceases to load after restarting, and my monitor shows a 'No Signal' message, which I am guessing that the bios does not even load. I have no problems changing the CPU Voltage or the BUS Speed, but whenever I touch the CPU Ratio, this problem persists.
I believe the default multiplier is 16x. Even when I keep it at 16x, it still gives me this problem.
What is the issue here? Do I require a bios update?

Fish it out, do not use Live Update
>> Use the MSI HQ Forum USB flasher <<

MSI 790FX-GD70 Randomly Freezing

Hello,
I have a really strange problem with this card.
I get random freezes usually whilw browsing and I have to reset my computer.
My setup is:
AMD Phenom II 955 X4 BE
MSI 790FX-GD70
Corsair XMS3 4x2GB 1333MHz (there are two sets 2x2GB TW3X4G1333C9A G)
Connect3D Radeon HD 4850 512 MB
Corsair TX 650W PSU
I've checked Memory running Memtest and it's ok.
Any suggestion?

I've already checked that too.
I get 2 messages just after I reset my system.
1st is an Error:
Quote
Event 6008, EventLog
General
The previous system shutdown at 7:26:34 μμ on ‎25/‎3/‎2012 was unexpected.
Log Name: System
Source: EventLog
Event ID: 6008
Level: Error
User: N/A
Op Code:
Logged: ‎25/‎3/‎2012 7:28:42 μμ
Task Category: None
Keywords: Classic
Computer: AMD-955-X4
Details
EventData:
7:26:34 μμ
‎25/‎3/‎2012
974
DC0703000000190013001A0022009C00DC07030 00000190010001A0022009C003C0000003C0000 000000000000000000000000000000000001000 00000000000
Binary data:
In Words
0000: 000307DC 00190000 001A0013 009C0022
0008: 000307DC 00190000 001A0010 009C0022
0010: 0000003C 0000003C 00000000 00000000
0018: 00000000 00000000 00000001 00000000
In Bytes
0000: DC 07 03 00 00 00 19 00 Ü.......
0008: 13 00 1A 00 22 00 9C 00 ....".œ.
0010: DC 07 03 00 00 00 19 00 Ü.......
0018: 10 00 1A 00 22 00 9C 00 ....".œ.
0020: 3C 00 00 00 3C 00 00 00 <...<...
0028: 00 00 00 00 00 00 00 00 ........
0030: 00 00 00 00 00 00 00 00 ........
0038: 01 00 00 00 00 00 00 00 ........
2nd is a Critical:
Quote
Event 41, Kernel-Power
General
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Log Name: System
Source: Kernel-Power
Event ID: 41
Level: Critical
User: SYSTEM
Op Code: Info
Logged: ‎25/‎3/‎2012 7:28:34 μμ
Task Category: (63)
Keywords: (2)
Computer: AMD-955-X4
Details
EventData:
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0
But these are errors you get if you reset your system using reset button.
They can't help you identify what made system freeze.

SOLVED:MSI 790FX-GD70 Freezing probelms?

I recently bought the msi 790fx-gd70 board, along with a amd athlon 2 x2 240 cpu, and 1 stick of kingston hyper x ddr3 1600 2gb ram, now my problem is that the computer keeps halting/freezing at random. I may get 10 minutes without a freeze or it may freeze on boot. I know that the cpu is supported, the bios is at v1.4 and according to the cpu support list, that is fine. Now on the other hand the memory isnt, the code for my memory is KHX1600C9D3/2G. Now i have seen that other kingston memory is supported, eg. the KHX1600C9D3K3/2G. Has it somthing to do with my mem been single channel as opposed to dual channel. 1 stick vs 2. i cant work it out, so that why i posted here, in hope that someone could shed some light
My full system specs are as follows.
AMD ATHLON 2 X2 240
KIGSTON HYPER X 2GB DDR3 1600 CL9 DIMM
MSI 790FX-GD70 MOTHERBOARD
RADEON HD3870 512MB GPU
RAPTOR HDD 150GB
CORSAIR HX620W PSU

Ok back again..lol. After changing a few bits of hardware that i could (graphics card, hdd) (Just thought i would try everything possible before rma'n the ram) I was still plauged by the rebooting, but... i was faced with a
" hypertransport sync flood error" at boot. Which threw me rite of course, now after doing a bit of google'n i found a few people have had this problem with certain msi and asus boards. But what does this mean is wrong, does it still indicate a ram issue or is it now a bios/mb issue? Im so close to rma'n the whole lot and going back to my old rig (at least it worked) I will only rma the ram if i am 100% sure it will fix my problem, no point in wasting money if it wont solve anything.

How to set 1600 timmings on MSI 790FX-GD70

This is how and these are the settings that I use to achieve stable 1600 timings on my OZC Black Edition Ram using the MSI 790FX-GD70 board.
OCZ AMD Black Edition 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) OCZ3BE1600C8LV4GK timmings CL 8 8-8-8-24 1.65volts
Restart computer, Boot into BIOS by pressing "delete" until you see the screen say it is going into the bios. When changing settings in bios use the plus and minus key to make changes.
Select Cell Menu, this is the memory menu where you will adjust most of the timings for your memory
Go into Advanced Dram
Set the following timings settings for your RAM When selecting both you have to scroll down the page and set the same timings for the other dimm. So you are setting one set for one RAM and one for the other.
In the picture I have it set for 2T but I use 1T, 1T is faster but I am showing you the default spec settings of the ram, once complete hit esc and back to the cell menu
continued

I would like to point out that I have my CPU overclocked so that is why I have turned the cool n quiet off. You will also note that some of my numbers are not set at 2400 and that they are a little bit above what I have wrote. This is caused by me trying to get a little more out of my CPU overclock. These settings and multipliers interact with each other so if I set a multiplier at 12 and it shows 2400 but then go and set the FSB frequency a little higher the timing will reflect in the HT link. One note, you can not have your CPU-NB Freq lower then your HT Freq. Just wanted to explain that so you know why my numbers are not exact or a little different from the settings I am showing
Do not replicate my settings for the CPU as they are all different for all systems. I am only showing you the memory settings that you can set from the OCZ 1600 settings that they recommend.
Press escape and hit F10 to save your settings and the computer should post with the timings that we set.
Once you are stable you can then go in and try different settings of your own. Most people will try tighter timings which could relate to 7-8-8-8 or 7-7-8-8 etc. You can experiment once you are stable with the stock 1600 settings.
Your bios should have a User settings section and you can save your settings in their so if you are experimenting and you have to re-boot you can easily load the saved settings that we have done here!
If you mess things us and have to reset the cmos you unplug the maching, wait at least 1 minute and then press the cmos button. Plug machine back in turn power supply back on and the computer will tell you it has an error and to press F1. Press F1 and set the clock, then go into user settings and load the settings that we did here. If at anytime you want the original settings go into bios and select optimised settings and it will load the best settings that it uses to operate. Note that your overclocks and your ram will go back to default settings and any bios settings that you did manually will be gone until you reload them in user settings. If you update your boos, user settings are lost and you would manually have to set the timings again like we did here.
Many ways to go about this and this is the way that I use. I am not saying it is the only way or the best but it does work. I am using stock volts on the CPU and recommended volts for the memory and to raise the NB Freq. Constructive comments are very welcome.

Memory Advise for MSI 790FX-GD70

Whoever may help,
Hi all, i'm trying to build a computer, i have all except the memories, im intent to go to 8GB DDR3 1333mhz but i dont know which brand/memory is compatible for this board. if anyone could help me in this i would appreciated.
Thank you.
my system spec is:
MSI 790FX-GD70
Phenom II X4 Quad-core 910 2.6GHz Processor
ARCTIC COOLING Freezer 64 Pro
Antec TP-750 750W Continuous power
Antec Twelve Hundred with extra cooling fan tricool
SAPPHIRE 100243-1GTXSR Radeon HD 4870 1GB
LITE-ON Black 22X DVD+R SATA
Western Digital Caviar SE16 WD3200AAKS 320GB SATA 2x order

Main Memory
• Supports four unbuffered DIMM of 1.5 Volt DDR3 800/1066/1333/1600*/1800*/2133* (OC) SDRAM, 16GB Max
http://global.msi.eu/index.php?func=proddesc&maincat_no=1&prod_no=1740
Quote
but i dont know which brand/memory is compatible for this board.
That most depend of the CPU used, since memory controller is there.
You can see memory test report here ==> http://global.msi.eu/uploads/test_report/TR10_1740.pdf

How many ATA drives can I install in an MSI 790FX-GD70 AM3 motherboard?

I have a MSI 790FX-GD70 AM3 motherboard ordered with an AMD Phenom II X4 965 processor to upgrade my current machine.
In my current machine I have two ATA drives. Will I be able to install both of those ATA drives on that MSI 790FX-GD70 AM3 motherboard or will it accept only one?
I plan on replacing one of the ATA drives with a SATA drive later, but I'd like to hold off until after Christmas. If not, I'll just have to get by with one drive for a while.
Thanks
John

Quote from: Bas on 29-November-09, 05:41:33
You can always add a ATA controller card to extend it.
How much do you need?
BTW, ATA = Serial-ATA or Parallel-ATA = ATA
There is no such thing as an ATA but or and (E)IDE bus.
Many use the wrong naming including MSI.
OK. Now if I understood Hans correctly, the board has one PATA-connector. To that, I can connect 2 PATA-devices.
Now here is a picture of my device manager:
Can I connect those two Western Digital drives to the PATA connector?
Bear with me. I'm trying to figure this out.

MSI 790FX-GD70 Random Freezes

Hi I need help. My pc which I bought yesterday randomly freezes from time to time and I don't know why. It started freezing yesterday. I tried changing my memory voltage from auto to 1.5 then to 1.65 still the same. Sometimes when it freezes I hear a nonstop beep sometimes the last sound output just gets repeated nonstop. It doesn't matter what I do, whether the PC is idle or if I'm playing games, it freezes. When I play games I can play for an hour or 2. Here's my specs.
AMD Phenom II X4 955BE 3.2ghz
MSI 790FX-GD70
BIOS ver. 1.1
Kingston 2GB DDR3-1333 Module Name: Kingston 99U5403-002.A00LF
250GB Sata Seagate
Newly Installed Windows XP Pro
nVidia Geforce 7600GT
500w Trend PSU
Going to sleep now. I will reply when I get up later thanks in advance.

Hi,
please test each memory module individually @1.6V and see if the problem still occurs.
Quote
500w Trend PSU
Can you please post the exact model name of that PSU and write down the amperage limits (A) for the +12V voltage rail (or each +12V rail, if it has more than one)?
Quote
nVidia Geforce 7600GT
Does this video card have its own 6-Pin +12V Power connector?

MSI 790fx-gd70 power supply

Hi im building a computer for gaming and for watching movies but I need to know what power supply I need with this build her is the goodies i will be putting in this build
MSI 790fx-gd70
cooler master hyper N520 cpu cooler
AMD 955 3.2 ghz cpu
Lite on dvd rom
2 320 gb sata hard drives
4 ATI Radeon HD 4870 graphics cards
windows 7 64 bit
Antec 900 case
8 giggs ram
Thanks Scruff

Quote
4 ATI Radeon HD 4870 graphics cards
Bloody hell, you planning on playing games at full settings on a 50" plasma?
You might want to be looking at a Corsiar TX850:
http://www.corsair.com/products/tx/default.aspx

Network problem with vodafone in india, noida

network pronlem in my iphone 5 for last 8months, please advise what to do?.

What problem?
Any network problem with your cell phone carrier you need to take up with the carrier.

Problems with msi p35 neo 2

Default problems with msi p35 neo 2
pc works fine when using windows and the net and emails
only when using 3d mark or games do i ever get problems
just help in getting the hole story 6 months ago got a msi neo2 install all my old components core 2 duo 4 gig ram form a diffrent board works fine but never used it playing games just used for the net and email shoping seamed to work fine but
tryed playing a game 2 months later command and conquer 3 pc was some times freeze or graphics artefacts on screen assumed vga card faulty got another graphics card geforce 8600gts installed still the same in the last month got round to playing with the pc again and installed new g7 780 watt power supply and ati hd 4870 graphics card
now i can use 3d mark some times it will go through once or just freeze or 3d mark stops the test
temps on the board (from msi dual core center temps cpu 33oc system 47oc)
memory voltage 2.1
any one know the settings for the ram
more details you need
System Details
MotherboardEdit Value
msi p35 neo2 fr
Motherboard BIOSEdit Value
latest
CPUEdit Value
core 2 quad 6600
CPU Overclock SpeedEdit Value
none
CPU HeatsinkEdit Value
standard intel that come with cpu
CPU Idle TempEdit Value
N/A
CPU Load TempEdit Value
N/A
MemoryEdit Value
******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
Memory VoltageEdit Value
N/A
Video Card(s)Edit Value
ati hd4870
Video Card SpeedEdit Value
N/A
Sound CardEdit Value
onboard
PSUEdit Value
g7 780 watt power extreme
Hard Drive(s)Edit Value
mator dimondmax 21
Optical Drive(s)Edit Value
N/A
Other CoolingEdit Value
3 80mm fans 1 frount 1 back 1 side
ModsEdit Value
N/A
Operating SystemEdit Value
windows 7

Quote
******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
Quote
memory voltage 2.1
Make sure that the memory timings are not set to 4-4-4-x but that they are set to the defaults values (5-5-5-x). Also ensure, that the memory clock speed is not set to anything higher than 400 MHz (=DDR2-800). The voltage at these settings should not need to exceed 1.95V. So please lower it accordingly. In case the freezes still occure, please run memtest86+ to check your memory for errors.
Quote
msi dual core center
Please get rid of that tool for all further tests. Uninstall it completely from your system as it is known to cause crashes and freezes on its own terms when running.

I have a small problem with MSI GF4 MX 420

Hi,
I have a small problem with MSI G4MX420-T(S+C) ( MS-8878 ). Exactly with nVidia WDM Video Capture (universal), which " can't be turned on " by Windows XP.
I have also new drivers ...
Could someone help me?
Asus A7V333
Athlon 1700+
128 MB RAM
Thanks !!!

If you only have 10 seconds of content in a 15-second composition, then you need to either add more content or shorten your composition.
You can shorten the composition by changing the duration in the composition settings.
Since you're obviously very new to After Effects, I very strongly recommend that you start here to learn After Effects.

USB problem with msi (nforce 1)k7d420

USB problem with msi (nforce 1)k7d420
i encountered problem when using my apacer audio steno mp3 player with my nforce(which i don`t hav any problem when using with any VIA chipsets)
it detects and install the device automaticly but when i want to access it,it just gives me error msg
windows xp pro service pk1
nforce nvidia drver v2

http://www.nforcershq.com/forum/viewtopic.php?t=30003
may be ive not loaded it yet

[Athlon64] Problem with MSI RS480M2-IL

Hi all,
I have problem with MSI RS480M2-IL. My problem is My temperature is very high... around 55-60c ... i am using AMD 3000+ Venice and no OC... and SpeedFan unable to detect my Voltage usage... Aida32 also same... 1 more thing is when i tried to run SiSoft Sandra 2005... it will take alot of time to load, sometime will just hang. i Test PCMark04 and found only got 3k for average mark... my friend getting 4k+ and we are using same spec... Below is my Spec:-
MSI RS480M2-IL
AMD 64 3000+ Venice E3
Bios Version 3.8
Geil PC3200 DDR400 2.5-3-3-6
Maxtor 60GB HDD 7200RPM 2mb
Verudium Power Vortex 420W
Hope some one can advised me what to do... my score too low and my board detect temperature and voltage is not accurate... Hope MSI Engineer will look thought and help me... Thank for Viewing !

the underlying "Who's fault is it?" question: AMD64 VENICE CORE (E3) PROCESSORS? or MSI RS480M2-IL MOBOS?
so far, ALL users with this proc/mobo combination HAVE the high (or incorrect) temperature issue. replacing the mobo obviously will not resolve the issue but replacing the proc with one that is NOT a Venice E3 core, does the trick. but of course, not everyone will have the privilege of exchanging their damned proce via the retailer specially if it's beyond the first 21 days of purchase.
in my case, my retailer refused to have the E3 proc replaced with the 'corrected' E6 version no matter how hard you explained the known issues with the E3. no chance of AMD recalling the E3 cores since problems with are only isolated to the particular MSI RS480M2 boards.
so for users that are and will be stuck with this combination, what is the solution then to the temperature issue? in my opinion, it's up to MSI to perhaps release a bios update that will correct this. another important thing to consider is the question: IS MY VENICE CORE INDEED OVERHEATING OR IS IT JUST THE MSI MOBO SHOWING INCORRECT READINGS? the proc overheating in actuality is obviously a lot different thatn just having an incorrect bios temp readings.
based on what i have observed, my Venice core displays the correct cpu temps (33-35*C) when being used on a MSI K8 Diamond mobo. placing the proc back to the R2480M2 board shows a very unusual 61-63*C bios cpu temp. furthermore, if i touch the stock heatsink/fan cooler that i have (for both motherboards), it really does NOT seem to be extremely hot to think that the cpu is actually overheating. in addition, my system using the RS480M2 performs well and has no spontaneous shutting down problems whatsoever. of course, my sense of touch is not as accurate as a thermometer but more or less, if you consider all the points i mentioned, most of us can say that the whole issue is just a matter of incorrect cpu reading.
perhaps the ATI chipset is the one to blame since i have notices as well that the Venice core processors do not seem to have this high temp problems with MSI's K8 mobos with the NVIDIA chipsets.
one last question: so do you guys think that this problem can be resolved by a simple bios revision? (as a dell tech guy, i do know for a fact that bios updates resolves overheating error messages in Inspiron/Latitude laptops)

Network problems with MSI 790FX-GD70

Similar Messages

Maybe you are looking for