Network protocols are not showing in sql server network configuration manager

Hi,
We are running 64 bit SQL server 2012 SP1 version. Everything was working fine but suddenly SQL server network configuration showing blank.
So please suggest how do I get it back.

Hello,
Could you please try to repair the installation?
http://technet.microsoft.com/en-us/library/cc646006(v=sql.110).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

Can't find SQL Server 2012 Configuration Manager

In my Win8 I can't find SQL Server Configuration Manager.
I need to connect to an SQL Database using a specific port.
Does anyone know how to do that?
Thanks a lot!!

Hi Lina,
Did you install multiple SQL Server instances on your local server? We can not configure SQL Server 2012 instance under SQL Server 2008 R2 Configuration Manager.
If you had installed SQL Server Configuration Manager with SQL Server 2012, you can try to run "sqlservermanager11.msc". If this is not opening then you might not install SQL Server 2012 Configuration Manager.
Regards,
Fanny Liu
If you have any feedback on our support, please click
here.
Fanny Liu
TechNet Community Support

Services of 2nd instance disappearded from SQL Server 2012 Configuration Manager but still running

We recently configured multiple SQL Server 2012 R1 (two-node) clusters. Some with two instances. However, we discovered later that the Configuration Manager only lists the services of the 1st instance (the default MSSQLSERVER instance). The other named instance
is still running and can be failed over from one node to the other using Cluster Failover Manager but the services are not showing up in Configuration Manager in any of the two nodes.
Any thoughts as to why we see this odd behavior and how to fix it? We have done two instances before in SQL Server 2008 R2 but never saw this behavior.
Thanks,
Omer

Please see my answer above about the SQLCM version. We use the highest.
As I said before that this happens only when we have two instances running in a SQL2012 cluster. We configured 7 SQL 2012 clusters. three of them have two instances but only the services of one instance are displayed in CM. Services of the default instance
are listed in two of these clusters while services of the named instance are listed in the 3rd one.
One thing to note about these configurations is that the installer could not bring the services at the end of installation online because it did not have permission to create the computer objects in AD during setup thus we had to follow a known workaround
that involves having the domain admin fix these permissions and then we were able to add the SQL Agent Service to the cluster and bring the services online after modifying the ConfigurationState key value of each instance in the registry.
The installer account is setup as a local admin and we asked the domain admin to give it "Read All properties" and "create computer objects" in AD but for some reason it does not seem to have the ability to create these computer objects during installation
and the objects are to be pre-created and their permissions reset afterward.
I am giving this information and I am not sure if it has anything to do with the fact that SQLCM is listing the services of one instance and not the other.

Susbscription Action not showing in SQL Server Reporting Services Web Part

I am trying to use the SQL Server Reporting Services Report Viewer Web Part in a Share Point site. Under the View section of the Web Part Properties, I am able to select "Show subscription menu item". However, it never shows up. Is
there something else I need to configure to allow this Action menu item to show up?
Thanks in advance!

Hi Gouranga,
According to your description, when you install the SQL Server 2012 Reporting Services Add-in for SharePoint 2013, you find the files are installed into the folder for sharepoint 2010(..../14). Right?
In Reporting Services, Not all features are supported in all combinations of report server, Reporting Services add-in for SharePoint, and SharePoint Products. Please see the linke below:
Supported Combinations of SharePoint and Reporting Services Server and Add-in (SQL Server 2012)
As you can see in the link, the SQL Server 2012 Reporting Services Add-in is only for Sharepoint 2010. This the reason why it's installed into the file for sharepoint 2010.
Reference:
Where to find the Reporting Services add-in for SharePoint Products (SharePoint 2010 and SharePoint 2013)
Install or Uninstall the Reporting Services Add-in for SharePoint
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SCOM 2012 Installation does not show the SQL Server Instance for reporting services

I have an issue when I try to install SCOM 2012 with the Reporting Server feature, so in the step that I have to select a SQL Server Instance I cannot do that, because as you can see in the picture no one option appears.
In my scenario I have a DCSERVER, SQLSERVER2008 R2, SCCMSERVER 2012 and in other server I are trying to install SCOM 2012. I are trying to use the same SQLSERVER to SCOM 2012.
Should I do other procedure on SQL Server before to continue? I will apreciate someone could say me what I need to do to resolve this issue.
Regards,
Paul Mendoza.

Hi Paul
Can you confirm that SQL Reporting Services is installed on the server that you are doing the install.
For a lab environment where you have SCOM Management Server, Web Server on one server and SQL Server on another you need to:
- run setup on the SCOM Server and choose NOT to install reporting. The install here will create the OperationsManager database and OperationsManagerDW (reporting) database.
- run setup on the SQL Server where SQL Reporting Services is installed. Then choose to install reporting. You should then see the SQL Reporting Services instance on the above window which is blank in your screenshot.
Take note of the warning in that window - SCOM uses its own role based security within SQL Reporting Services and this can break other reporting. E.g. you can't install SCOM and SCSM reporting (SQL RS component) together.
Cheers
Graham
New SCOM 2012 Blog! - http://www.systemcentersolutions.com/blog/
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/

SQL Server Usage Summary page, the count of user/device: does not show for SQL Server 2008

Does MAP tool capture User Summary (count of users, their details) for SQL Server 2008?
At my end, its working for SQL Server 2012 but not showing User Summary for SQL Server 2008..
Does the User Summary only works for SQL Server 2008 Enterprise edition as one of the thread points out?

This is from the
Wiki article:
SQL Server 2008 Enterprise and Datacenter Editions introduced audit event configuration for Windows security logging, which enabled SQL Server 2008 to log logon events to the Windows Security log. The table below shows which versions and editions have the Audit
feature that is needed to record the logon events. MAP cannot obtain user and device access information for any other editions or any older versions of SQL Server.
Datacenter
Enterprise
Business Intelligence
Standard
Workgroup
Web
Express
SQL Server 2008
N/A
Yes
N/A
No
No
No
No
SQL Server 2008 R2
Yes
Yes
N/A
No
No
No
No
SQL Server 2012
N/A
Yes
Yes
Yes
N/A
Yes
Yes
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Some tags are not showing in SQL when executing the script as per Date

A) When i am executing below script
Select ToP 10000 [T_idx],[T_Tag], [T_date], [T_counter] from dbo.[total] ORDER BY T_DATE desc
i am able to see all tags with respect to date except some tags prefix with ----PO, this 'PO' tags also present in the same table, with same time and date like other tags
B) When executing below script
Select top 10000 * FROM dbo.[total] where T_Tag like '%PO%' ORDER BY T_DATE DESC
i am able to see all tags related to PO
How i can all tags including 'PO' with one script. can any one help me ??
acmi

Venkat,
Select ToP 10000 [T_idx],[T_Tag], [T_date], [T_counter] from dbo.[total] ORDER BY T_DATE desc
The above query MAY or MAY NOT give the records with taag ---PO as they might belong to a later data which might not fit into the top 10,000 dates of the table. This shud be the problem.
If you want to see all the data irrespective of the number of rows, then below shud help:
Select
[T_idx],[T_Tag], [T_date], [T_counter]
from dbo.[total]
ORDER BY T_DATE desc
If you need the rows that CONTAIN --PO then folowing shud do it:
SELECT
[T_idx],[T_Tag], [T_date], [T_counter]
FROM dbo.[total]
WHERE T_Tag like '%PO%'
ORDER BY T_DATE desc
If you need just the top 10,000 rows of the above result, then just add a TOP clause as below:
SELECT
TOP 10000
[T_idx],[T_Tag], [T_date], [T_counter]
FROM dbo.[total]
WHERE T_Tag like '%PO%'
ORDER BY T_DATE desc
Thanks,
Jay
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

Wireless networks connections are not showing up

I have a 3000 C200 model with windows 7 installed. From a few days the wireless network connections are not being detected. The networks are being detected in my other laptop. Can someone please help me in resolving the issue.

Hi Sandy2246,
Thanks for posting and welcome to the community. Was reading through your post and was wondering if you try reinistalling the driver listed below. Please ensure to choose the correct drivers that matches your machine wireles card.
Networking: Wireless LAN
Driver
Operating System
Released
Broadcom Wireless LAN driver for Windows Vista (32-bit) - 3000 C200, Lenovo N100 ... Learn more
Version
: 5.60.18.8
Broadcom Wireless LAN Driver
Read me
Windows Vista
14 Dec 2009
Broadcom Wireless LAN driver for Windows XP - 3000 C200, N100 ... Learn more
Version
: 4.170.75.0
Broadcom Wireless LAN Driver
Read me
Windows XP
24 Mar 2009
Intel wireless 3945abg driver for Windows XP - 3000 C200, N100 ... Learn more
Version
: 10.5.1.59
Intel Wireless 3945abg driver
Read me
Windows XP
04 Oct 2006
Wireless LAN (Intel abg) driver for Windows Vista (32-bit) - 3000 C200, Lenovo N100 ... Learn more
Version
: 12.4.3.9
Intel Wireless LAN (abg) Driver
Read me
Windows Vista
24 Aug 2009
Hope this helps.
Please do post back your results.
Regards

Sql Server 2014 showing no services in the configuration manager after install?

I'm using Windows 8. Recently I downloaded sql server management studio 2014 from the official website. But when I open the Sql server 2014 Configuration Manager there are
no services listed.
During installation, there were no any errors.
See pic from here -> http://stackoverflow.com/questions/26159248/sql-server-2014-showing-no-services-in-the-configuration-manager-after-install?noredirect=1#comment41009151_26159248
I did search everywhere but still I didn't find anything, please help me resolve this issue. I downloaded Sql server management studio 2014 from here-> http://msdn.microsoft.com/en-in/evalcenter/dn434042.aspx
Inside `win+r` as i type `services.msc` I'm unable to see any sql or service into it.

I downloaded sql server management studio 2014 from the official website. But when I open the Sql server 2014 Configuration Manager there are
no services listed.
Of course not, SSMS = SQL Server Management Studio is just a tool/frontend, not a Service. You have to install SQL Server database engine.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Already logged in message but not showing up in Server Admin

Running server software 10.3. Most clients are 10.4.
I have several students that can't log in because it says they are already logged in elsewhere. Normally I go to Server Admin and disconnect them and they can then log in. But I've got about 4 students right now that are NOT showing up in Server Admin, so I can't disconnect them. Any ideas of what might cause this, and more importantly, how to fix it?

I have this issue as well. Rebooting the router and server? I'm glad that works but that should not be necessary. Neither should checking allow simultaneous login on multiple computers in WGM.
I will continue to look for an answer. thanks for the tip.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

My Macbook Air does not show up on my network to any of my other computers, Other computers on my network appear and disappear, some shared folders are not accessible

My Macbook Air with Lion does not show up on my network to any of my other computers (PC's) , even though it is connected to my wifi and does access the Internet. In addition, my other computers sometimes show up in Finder and sometimes they're not there. Sometimes they do show in Finder and when I click on them, I get "Connection Failed", other times, they connect. Also some shared folders on those other computers, which are PC's are not accessible, even though fully shared. My network is Apple Airport Extreme and works perfectly otherwise, including all PC's being able to see each other. Help would be much appreciated

I got the same problem. I want to access my shared folder on my home windows7 from my MBA. Tried many suggestions on the web but all to no avail. I thought that should be very trivial. Maybe a Lion bug?

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26- Error:Locating Server\instance Specified)
How Can i solve this?

1. Make sure SQL Server Service is running
2. If a named instance, make sure SQL Server browser service is running
3. Make sure SQL Server is configured to allow remote connections
4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
5. Test server connectivity with PING from the client machine
6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine. For example
a. TELNET <server-name> 1433
b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
7. Check firewall settings if step 5 or 6 connectivity test fails
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

What are all the features not supported in SQL Server 2012 trial version?

What are all the features not supported in SQL Server 2012 trial version?

The evaluation edition supports all features and expires after 180 days.
https://msdn.microsoft.com/en-us/library/cc645993.aspx?f=255&MSPPError=-2147217396

Servers showing compliant even patches are not installed in the server

Hi
We are using SCVMM2012 and Patches are not getting downloaded on to the server even though in the report of complaince SCVMM2012 it says compliant, even patches are not instaled in the server.
What should i do for the same.
Thanks

Please post the output of:
dmesg -c
modprobe e1000e
dmesg

Network protocols are not showing in sql server network configuration manager

Similar Messages

Maybe you are looking for