Network Recovery: No Internet Connection

Hello, i have a brandnew MacBook Air (2011) with Lion. My problem: The Network Recovery haven't internet connection. There's a little clock (24:00) under the globe, but nothing happens. The App-Store Lion-Version don't works with the new MacBook Airs. It's not possible to install Lion with a USB-Stick or a external drive. Any ideas?

Solution.
Ethernet don't works, WiFi is okay.
ATTENTION, my mistake: I live in europe with the german-keyboardlayout, but the Mac used the US-keyboardlayout after the reset. I wrote the password wrong, because the keyboardlayouts was different.

Similar Messages

"Network disabled because Internet connection is slow"

I have both a Samsung Galaxy S3 and a new Samsung Tab 3. After a recent software upgrade, I was having connectivity issues to wireless routers. The message I got when connecting to a secure wireless network was "Network disabled because Internet connection is slow". I determined that I had no issues with either my phone or tablet on either an unsecure router (WiFi hotspot), or with any older router that broadcast WPA2 personal with either aes OR tkip security. I do have a problem with connecting to any new router that broadcasts BOTH aes and tkip at the same time. When I change the routers under my control to broadcast only aes or tkip, then I can immediately connect both my phone and tablet to the router. There are obviously a lot of routers over which I have no control, so this needs to be fixed. I am pretty sure that there is a problem with the latest Android software upgrade in this regard

I am having the same problem with my Galaxy 3S since the upgrade. Have searched for settings, etc. but haven't found anything I can control. My home network is getting 54.4 down and 5.7 up! Have had this issue nearly everywhere I am connected.
I think it needs a fix - noticed today that Verizon has doubled my DATA for free. May need it if this continues.

Attempting to Connect to Network Shuts down Internet Connection

I am setting up a G4 400 MgH Mac with AGP graphics to get on a network of computers. This originally came from a college where it was on a network running OSX and OS9.1, and I have added a 100 GB hard drive on which I installed OX10.4, and upgraded to OS9.2.2.
It is very odd, as when I try to connect to the network through the ethernet connection in starting up in OS9.2.2, it will connect to the other computers and to the internet without problems, and does not affect the internet connection. However, when I start up in OSX, all the other computers on the network lose their internet connection immediately when this computer boots up into OSX. I can, however, connect to the other computers on the network, but cannot connect to the internet. I am puzzled as to what resource in OSX must be damaged to cause such a problem. I have tried reloading Tiger, and have used Disk Warrior, but the problem is the same.
I would welcome any thoughts on how to fix this so we can get this added to the graphics network at our school.
G4/1GHz, 7600 w/G3/500 MHz , G4/733 MHz Server Mac OS X (10.4.7)

Only thing I can think of is that the AGP in OSX must have a Network setting that is grabbing an already used IP, or perhaps even the IP of the Router, or perhaps is set to Share the Internet connection.
I'd first off uncheck all ports in Network Port Configurations, reboot, for a try check on Ethernet in Port congigs again.
2nd, I'd try giving the AGP a Manual IP above the possible range handed out by the router.
3rd, I'd make a new User and see if the same thing happens.
If that doesn't work, I'd try trashing these and rebooting...
/Users/nnnn/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist

Connected to network, but no internet connection

Just returned from a one week trip to CA with my macBook. Prior to the trip everything regarding a connection to the internet worked fine... I have an Airport Extreme network set up at home. For the first five days of my trip, everything worked fine as well. Connected to several different open networks (offered by hotels and Bed & Breakfasts (B&Bs). Then suddenly I could not get an internet connection with any browser (Safari, Firefox, Flock). At one particular B&B it worked flawlessly one evening, then the next morning at the same B&B, no internet. Yet I was connected OK to the open network. Moved on to another city, a different hotel and network, same problem. I was connected to the network, but no internet connection. In Safari, the blue bar would get as far as the http:, then it would hang there. Now having returned home to my Airport Extreme network, everything seems to be working fine again in all browsers. Any idea what I may have encountered for those two days? I have another trip planned in the near future, and would hate to have this happen again.

I'm sorry but I'm not posting to answer your problem but just to say that I have a very similar issue when connected to my home network through either wireless or ethernet- connection is erratic and pages hang despite showing an excellent signal strength. I have a divided drive and have windows installed on my Macbook. I have no problems on the windows side. My friends who have ipods and iphones have similar problems connecting to my home network. I have no problems connecting wirelessly to any other network that I've tried. This is a real shame as I want to use Mac software but end up in Windows all the time. Any light anyone can shed on this would be very welcome.

How can i connect to a wifi network with no internet connection?

I used to be able to connect my Z10 to a wifi network even when the network had no Internet connectivity when i got my phone in Feb. 2013 (10.0) However ever since the 10.1 update this has stopped working. I cannot connect to my wifi network when there is no Internet connection. I cannot play videos / music from my phone to my tv/music system or connect to my laptop. However my laptop and tv communicate just fine through the same network.
Can anyone recommend anything for this?

nikhildhoot wrote:
I used to be able to connect my Z10 to a wifi network even when the network had no Internet connectivity when i got my phone in Feb. 2013 (10.0) However ever since the 10.1 update this has stopped working. I cannot connect to my wifi network when there is no Internet connection. I cannot play videos / music from my phone to my tv/music system or connect to my laptop. However my laptop and tv communicate just fine through the same network.
Can anyone recommend anything for this?
Your saved wifi networks should connect automatically whether internet is available or not, you may receive a notification "there appears to be no internet connection".
Update to 10.2, if not available from your carrier then use Sachesi (see other threads).

Airport network and sharing Internet connection

Hello all,
I have hit this problem with sharing an internet connection on an airport network. Maybe its a simple fix, maybe it a "can not be done", answer.
My set up may be a little hard to describe. To explain, completely wireless set up in my network, 1 x imac and 1 x powerbook, all on airport and using an airport express. This includes my new printer. All connected through airport express network, call it network A.
Up till now i had a modem with an ether net cable plugged into the airport express. All was fine.
I am in jakarta, the cable internet providers here are hopeless, slow connection speed.
Last month a new wireless internet service was released. Called 3.5 G. Its lightning fast and reliable. Basically you get a wireless USB modem attach it to your computer and you are always connected to the internet wirelessly. You can travel anywhere with it. The 3.5G is primarily for mobile phones but i use it just for internet. This modem is connected to my powerbook and works great.
Now, the useless cable internet connected to my airport express is still connected for my Imac to use.
My problem is that i would like to share my high speed internet connection from my laptop to my imac. Problem is that when i allow sharing from my laptop, the intenet works fine on both machines but on the powerbook, which is doing the sharing you get an arrow symbol through the airport icon at the top.
The laptop can NOT access the local airport express network A. Hence i cannot use the printer or see the imac. That is my problem, i cannot print from the powerbook unless i stop sharing. When you share an internet connection the sharing computer seems to create another computer to computer network and does not join the existing arirport network.
This is probably a little confusing. Hopefully, someone may have some ideas. My alternative is to buy a new fixed position modem/router for the 3.5G system. Its about $600. Ouch.
Any ideas
thanks for the interest.
joe

Selamat Phil Smith,
Actually do we know each other, cause i know a phil smith.
Actually an ether net cable is OK for the short term. But if i get another computer it may get complex. Spent a lot removing cables too.... Looks like i will have to buy the special modem router... Painful $600.
This share internet thing over airport looks like a great idea till you realise it disables access to the ariport network for the computer doing the sharing.
Cheers and thanks for the idea
joe

Macbook pro connected to network but no internet connection

Hey all,
i have a Macbook pro, running on OS X 10.6.8,
i made a software update, where a java update was made, an HP printer update, a Itunes ipdate and a Macbook Pro SMC firmware update 1.6.
Since then, i cant connect to the internet.
I ran network diagnostics and it says "your connection appears to be working correctly".
Same if i plug in the Lan-cable to my laptop.
Network diagnostics says that my internet is running correctly, but no browser or any other program can connect to the internet.
tried it at 2 different location (home and work) and nothing works. Other laptops have internet connection through the same router and wifi.
restarted router and wifi, did not help
restarted wifiAirport multiple times, wont help,
restarted Laptop multiple times, wont help.
renewed DHCP, and IP adress, i get a new ip adress, and it says im connected but it wont work.
any other ideas?

That doesn't mean anything. You can't telnet to google. lol
The ping you did above shows you that Internet access and DNS is working fine. If it wasn't, you wouldn't be able to get replies. This means that the problem is with your browser. Open up Safari and hit Safari/Reset Safari under it's menu. See if that works to solve your issue. If it doesn't, then it's a plugin or something else (maybe Proxy changes, etc.) which could be causing this. One option you have to test is if the reset doesn't fix it, install another browser (you'll need to download the dmg via another PC and install it on the mac from a memory stick or something) and see if a 3rd party browser works.

Connecting two networks with two internet connections

Hi All
The situation is this. Two firms situated next door to each other and linked by their businesses and by their family ties, wish to connect their two networks together. They both have internet connections. The reason is for security, in the event of one internet going down they can use the other one.
As I see it, we could use a wireless bridge/repeater to connect the two ethernets together, turn off DHCP in both networks, and manually configure the IP addresses on one network to say 192.168.1.1 to 192.168.1.100 and set the gateway as the router address in that network, again manually allocated. Then on the other network set the scope to 192.168.1.101 to 192.168.1.200 with the router on that network set in this range.
In the event of failure of one internet connection, it would just require the gateway to be changed for those pcs to access the router on the other network. I know of a little program which would do that automatically.
Would this work? If so which Linksys equipment would I need to bridge the two networks. I know some equipment will do the bridging and allow wireless clients to connect, so that would be useful, I know it slows it down by half, but this might be acceptable.
Will there be other problems rearing their ugly heads which I haven't considered.
The networks are not large, so manual IP configuration is not a problem.
Thanks

I presume both networks are using wireless connections. If you can see your neighbour's network on your computer and vice versa, all you need is the passphrase to connect. You may have to disable filter mac address in your router.
Greetings from Northern Ontario, Canada

How can I tell what is causing wifi to drop - airport express light is green (iPad can find network, but no internet connection) and TWC cable modem has usual lights glowing?

Everything seems normal, except getting the internet connection. I have an old airport express - 802.11g

Is it the iPad that is the only device that cannot connect to the Internet....and other wireless devices can connect OK.....or.....is it a case of none of the wireless devices being able to connect to the Internet?
One of the potential issues here is that the iPad cannot be used to make any configuration changes to the older version of the AirPort Express that you have, so hopefully you have another Mac there that could be used to make any changes if needed.

Can't software update, networking error, yet internet connection fine

I am trying to use software update, but can't. I get this:
"A networking error has occured: timed out (-1001). Make sure you can connect to the internet, then try again. Software Update can't check for updates because of a network problem."
Yet network diagnostics show everything fine; mail works fine; network utility shows everything ok; wireless connection fine; TCP/IP looks normal; and browsers are fine -- here i am posting.
WTH?!
I know there are other threads about this, but the questions there are unanswered, even though the threads are marked answered.
I tried the following:
1. i backed up using Carbon Copy Cloner, then wiped my HD and copied back. That was ok, but still couldn't use software update.
2. i archived/installed 10.4, restarted.Some prefs gone but basically ok, couldn't use software update.
3. downloaded last combo update 10.4.7, and last security update. Quit everything, repaired perms, installed combo update, restarted. Installed security update, restarted.
4. i reset PRAM.
5. i checked the disk using Disk Utility. It's fine.
6. I made a new user account to test. Logged in there, tried software update, same result.
And i still can't use software update.
Someone in another thread wrote that this seems to be in UK and Netherlands. Possible?
Any suggestions anybody?
thanks, P
powerbook g4, 1ghz, 512 mb ram Mac OS X (10.4.7)

sorry, i forgot that: Yes, i deleted:
/Library/Preferences/com.apple.SoftwareUpdate.plist
[home]/Library/Preferences/com.apple.SoftwareUpdate.plist
[home]/Library/Preferences/ByHost/com.apple.SoftwareUpdate.plist
This last i am not sure of the exact name, i saw it before, deleted it, but it hasn't been regenerated.
there is also:
[home]/Library/Caches/Software Update/
which has nothing in it;
and
[home]/Library/Preferences/com.apple.SoftwareUpdate/
which has a lot of numbered folders and cache files with names like
'1321878279-2428557571.cache'
Should i try deleting those?
How do i find out the server name for Software Update btw?
Perhaps i should try plugging that into the SoftwareUpdate.plist?
thanks, P
powerbook g4, 1ghz, 512 mb ram Mac OS X (10.4.7)

HT1751 I need to set up iTunes to run on my local network, independent of the internet because of a bad internet connection.

I have Hughes Net, for internet. Due to this, iTunes in the cloud, does not operate for us. I need to put my music on a local drive, and create a network drive, to use iTunes, while at home. (I'm still not sure about how I'll handle the music on our iPhones). I have a current AirPort Extreme, (802.11ac), and I have a 64gb flash drive, as well as a 1.5TB external SATA drive, that can be used. I'd like to NOT have to keep the MacBook Pro powered on all the time, but would still like to play music, through/on my iPads and iPhones, while at home.
How can I set this up, to run, independent of the cruddy internet service, which won't allow me to stream a single song, without stopping to buffer, for multiple long periods, during one song?

itunes can share music over the network without an internet connection, but you will need a computer running itunes powered on to be able to share it (setup in itunes by going to file (windows) or itunes (mac) > preferences > sharing)
if you just want to setup a network attached storage drive for the network that holds all the music that would be done independently of itunes and you would need a compatible NAS drive (I don't believe the airport is technically a nas drive but you could ask that section of support communities as well https://discussions.apple.com/community/wireless/airport)

Airport network connected on full bars but "no internet connection" and missing lock icon!

this is really frustrating!
I'm using wireless in my house. when i click on my network it connects and it shows perfect connection which is full bars.
on Network Preferences it says that i'm connected to the Airport but when i go to Safari it shows "You are not connected to the Internet" so i click on Network Diagnostic where the 3 network status on top has the green indicator but the ISP, Internet and Server show red and failed.
I don't think there's anything wrong with my internet connection since I'm able to go online using my sister's computer and also on my iPhone.
There's also usually a Lock icon/symbol next to my network's name but when i'm connected to my network the Lock icon seems to be missing but it still shows full bars connection. I really don't get how it's possible to be connected to a network, but no internet connection, while i can access the internet on other devices.
Please help me out here. I've tried ways like going to library>preferences then put the system configuration into Trash, and going to Network Preferences and removing the Airport service and creating a new one.
and one more thing. all mentioned above are when i clicked on Advanced on network preferences then i clicked on TCP/IP and changed the Configure IPv4 from Using DHCP to Manually. When i'm back to using DHCP there's an exclamation point over the airport icon on the top bar and it says no internet connection.

Got my own question answered by a colleague.
He had me create another "Location" in the network pane of System Preferences, then choose it and click Apply. I created a new location which I called 'Airport', chose it and clicked Apply and sure enough, an IP address showed up and all is well.
Justin said it's a network bug in Leopard.

Internet connection error on our network

Hi Forms
I have constructed a survey in FORMS PLUS which when I go to test it through our school network encounters an internet connection issue. Also, when I use the url for the survey it also will not connect. The form itself can be seen and used outside of our netwrok e.g. my home internet connection without any problems. Any ideas what might be wrong?
https://formscentral.acrobat.com/app.html#d=yshKdVvsGW*WX8CyI9PT6g
Error Messgae that appears - at the same time I can Design the form, but cannot view or test it.
Internet Explorer cannot display the webpage
What you can try:
Diagnose Connection Problems
More information
This problem can be caused by a variety of issues, including:
Internet connectivity has been lost.
The website is temporarily unavailable.
The Domain Name Server (DNS) is not reachable.
The Domain Name Server (DNS) does not have a listing for the website's domain.
There might be a typing error in the address.
If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section.
Thanks

The FormsCentral application you used to design the form is hosted at the domain formscentral.acrobat.com. The domain for the HTML form is https://adobeformscentral.com
You should check with your IT department - for some reason they might be blocking https://adobeformscentral.com
Randy

I want to connect an Airport Express via WiFi to my internet connection and then connect its LAN port to the WAN port of a Time Capsule. Will then any device connected to the time capsule wirelessly be also connected to the internet?

Background is I can't hook up my time capsule directly to my internet connection via network cable. I tried to extend the network via Wifi, but that did not work. At the moment I have two wireless networks, one with internet connection and another one with my time capsule. So to use time machine I have to change my network all the time.
Can I buy an Airport Express, use is as a client to my internet connection wifi and provide that connection via network cable to my time capsule and all it's wifi clients?

The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

How to access Time Capsule hard drive with out internet connection?

Basically I live in a four bedroom house. One of my roomates moved out who had the internet in there name. Now i dont have an internet access but I have the Time Capsule with a 2 TB hard drive that stores my whole itunes library. I have enough space on my Macbook Air to store my whole library. I'd like to move my whole iTunes library back to my computer and wipe the Time Capsule Clean.

If the Time Capsule is providing a wireless network signal, an Internet connection does not need to exist to move files from the Mac to the Time Capsule, or vice versa.
Log onto the Time Capsule wireless network
Open Macintosh HD
Look for the Time Capsule icon under the SHARED heading on the left side of the window
Click on the Time Capsule icon and a folder named Data (unless you have renamed it) will appear to the right
Double click Data to mount the drive on the Mac's desktop
Open the drive on the desktop and you can drag/drop files over to the destination that you choose on the Mac.
Once the file transfer is complete, double check to make sure that the files are back on your Mac and everything is working properly. Then, you can erase the Time Capsule hard drive.

Network Recovery: No Internet Connection

Similar Messages

Maybe you are looking for