Network says "no service" and it sometimes do have 1 up to 3 bars and until the signal lost (iphone 3gs) ios6.0.1

network says "no service" and it sometimes do have 1 up to 3 bars and until the signal lost (iphone 3gs) ios6.0.1 help plzz...

Have a look at this it might help
http://support.apple.com/kb/TS4148

Similar Messages

  • My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

    My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

    Hi sunnylordz,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying. 
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
    Cheers,
    Mario

  • ITunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc.  I have had the service since Day 1 and NEVER had an issue.  It didn't start until the Delete from Cloud switch to Hide

    iTunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc.  I have had the service since Day 1 and NEVER had an issue.  It didn't start until the Delete from Cloud switch to Hide from cloud - the files that do not upload show grayed out on my other devices.

    Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device?  If so, keep in mind that Apple's servers may be experiencing a heavy load right now.  They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

  • I have deactivated my CS6 on my old computer and now when I have downloaded a trial version and enter the serial number it says not valid? I have only used my license on one computer before? Does anyone know the problem?

    I have deactivated my CS6 on my old computer and now when I have downloaded a trial version and enter the serial number it says not valid? I have only used my license on one computer before? Does anyone know the problem?

    Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    OR
    Asked to sign in after paying may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    or
    http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    Membership and Payments http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html

  • HT4260 I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?

    I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?

    Try resetting your modem. Power it down. Wait a moment, then power it up again. While it resets, do not change what is connected to it.
    In another, though unrelated article, Apple recommends the following:
    If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.
    This step really ought not be considered optional for the configuration you propose. If the problem persists after resetting your modem, reset everything else too.

  • HT1212 ipad is locked as my daughter locked putting in the password wrong too many times. When I try and do a restore it seems to be doing it until the end and it say it can't do anything as it's locked, go to itunes to unlock.. It's driving me mental

    My ipad 4 wif is ocked as my daughter locked putting in the password wrong too many times. When I try and do a restore it seems to be doing it until the end and then it say it can't do anything as it's locked, go to itunes to unlock.. It's driving me mental. tried twice now ...
    I haven't synced with a password, I don't mind losing all the data I just want to be able to use it again !! I'm not sure what IOS it is, not sure it's the most recent, I have a feeling I'm not on IO7.
    Thanks for all your help.

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • I can't update iMovie, just to clear the red spot on the menu bar since I don't use it, update says I need to purchase but I have iMovie 9.0.4 and update is 9.0.6, do I need to purchase?

    I can't update iMovie, just to clear the red spot on the menu bar since I don't use it, update says I need to purchase but I have iMovie 9.0.4 and update is 9.0.6, do I need to purchase?

    Disclaimer - For me the Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture very different from that found in most 1st world nations, such as that in the two dominant North American countries. Written language has no tone. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    You are confusing two different versions of the iMovie app. You have downloaded an update to the boxed version that Apple sold in the past. Yoi cannot update the version that Apple now sells in the Mac App Store with that update.

  • My iphone 5, 32g keeps shuttng down and restarting, sometimes at night, it just shuts down and will not restart.

    My iphone 5, 32g keeps shuttng down and restarting, sometimes at night, it just shuts down and will not restart.

    This can happen with faulty battery. Make Genius reservation and take iPhone to Apple Store for free quick battery diagnostic testing.

  • My phone has gone into recovery mode on its own.  says to connect to itunes.  i have restored it 10 times and it does nothing please help me i am out of the country and desparate

    my phone has gone into recovery mode on its own.  says to connect to itunes.  i have restored it 10 times and it does nothing please help me i am out of the country and desparate

    Open iTunes on computer. Connect iPhone to computer. If the iPhone is recognized in Recovery Mode, then Restore the Firmware. If not recognized, then hold both Home and Power Buttons until the iPhone is recognized in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware.

  • TS3297 After updating to ios6 I am mostly unable to download apps, about 95% of the time I get a box saying "cannot connect to iTunes Store". Have checked for more updates and been around in circles on apple tech "support", any ideas anyone?

    After updating to ios6 I am mostly unable to download apps, about 95% of the time I get a box saying "cannot connect to iTunes Store". Have checked for more updates and been around in circles on apple tech "support", any ideas anyone?

    After updating to ios6 I am mostly unable to download apps, about 95% of the time I get a box saying "cannot connect to iTunes Store". Have checked for more updates and been around in circles on apple tech "support", any ideas anyone?

  • I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red (!) and says that its no data. I have tried with different cards and different cardreaders, but it

    I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red and says that its no data. I have tried with different cards and different cardreaders, but it is still the same. Why?!

    Please give us more specific information -
    What make/model camcorder are you using?
    Are you absolutely certain this is AVCHD video?  Tell us more about the video settings you used in the camcorder (eg, frame size, frame rate, quality level)
    Why are you attempting Log & Transfer from a card reader instead of from your camcorder?  Have you tried doing Log & Transfer from your camcorder?
    Are the SD cards straight from the camcorder, unaltered, or are you just using the cards as storage?
    Are you using FCE 4.0 or FCE 4.0.1?

  • I ordered two iphone 6 devices on 10/1/2014, one has shipped and will arrive tomorrow, the other is still saying ship by 10/24.  Others have already gotten their phones and I am still waiting, even received the envelope to send my old phone back for trade

    I ordered two iphone 6 devices on 10/1/2014, one has shipped and will arrive tomorrow, the other is still saying ship by 10/24.  Others have already gotten their phones and I am still waiting, even received the envelope to send my old phone back for trade in program but still no word on my iphone shipment?  What is going on?

    Hi Brian1676,
    I am sure that you are excited about the arrival of your new phones. I don't blame you! We are certainly working hard to get these out as fast as we get shipments in from Apple. Have you checked your order status' here: http://bit.ly/RjmCUB? This is the most up to date information that we have available. Once the device becomes available in our warehouse, we will ship it out to you. I hope you receive it soon!
    JenniferH_VZW
    Follow us on Twitter @VZWSupport

  • I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install  Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

    I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
    So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
    Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
    Thank you.

    You're welcome
    Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

  • I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem?

    I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
    Interval Since Last Panic Report:  665204 sec
    Panics Since Last Report:          8
    Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
    Sat May 26 07:23:05 2012
    panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
    Backtrace (CPU 3), Frame : Return Address
    0xffffff8160313b00 : 0xffffff8000220792
    0xffffff8160313b80 : 0xffffff80002b4f36
    0xffffff8160313b90 : 0xffffff8000227e68
    0xffffff8160313bd0 : 0xffffff7f80d14250
    0xffffff8160313c20 : 0xffffff7f80d14f73
    0xffffff8160313cc0 : 0xffffff800059a237
    0xffffff8160313d00 : 0xffffff8000586cbf
    0xffffff8160313d20 : 0xffffff800057e6e3
    0xffffff8160313df0 : 0xffffff800057ed06
    0xffffff8160313e20 : 0xffffff8000583c52
    0xffffff8160313e70 : 0xffffff8000583d05
    0xffffff8160313e90 : 0xffffff80005358b4
    0xffffff8160313ef0 : 0xffffff80005367c3
    0xffffff8160313f30 : 0xffffff8000536897
    0xffffff8160313f60 : 0xffffff80005ccfe8
    0xffffff8160313fb0 : 0xffffff80002da5e9
          Kernel Extensions in backtrace:
    com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
    dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
    BSD process name corresponding to current thread: iStatLocalDaemon
    Mac OS version:
    11E53
    Kernel version:
    Darwin Kernel Version 11.4.0: Mon Apr  9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
    Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
    System model name: iMac11,2 (Mac-F2238AC8)
    System uptime in nanoseconds: 69777074610
    last loaded kext at 58265763561: com.intego.iokit.VBX6NKE            1 (addr 0xffffff7f80d11000, size 45056)
    loaded kexts:
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
    Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
    USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
    USB Device: CanoScan, 0x04a9  (Canon Inc.), 0x1904, 0xfa141200 / 6
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: HUAWEI Mobile, 0x12d1  (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
    USB Device: My Passport 070A, 0x1058  (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

    Immediate suspects are the additions you added to you rsystem that installed kexts (drivers).  From above,
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Two experiments you can try.
    1.  Boot in safe mode and see if you can shut down normally.  All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
    2. Uninstall all the intego VirusBarrier stuff.  That's my first guess and the troublemaker.

  • Is there a way to recover old emails? I moved a few folders around on the hard disk and now my emails have reverted to Factory settings and all my old emails and address book have vanished. I am still running on 10.4.11 and Apple can not help me.

    Is there a way to recover old emails? I moved a few folders around on the hard disk and now my emails have reverted to Factory settings and all my old emails and address book have vanished. I am still running on 10.4.11 and Apple can not help me. Does anyone out there have any idea on how to recover my lost emails and/or addresses?

    Well, your profile info says 10.4.11, and you are posting your question in the iMac (PPC) category.  If you are running Snow Leopard, it must be a fairly recent Intel iMac.
    In that case, you should definitely post your question here
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard
    where other Snow Leopard users can see your question.  Restate the problem, what error messages you get, and what you have tried already (for trouble-shooting).

Maybe you are looking for