Network Scan: IP "AND" AD OU Search
i dont think so. the entry has to be either an ip address or an OU.
Is it possible to have the network scan function require two search criteria?
I would like to scan for computers that are both in a specific OU in Active Directory as well as a specific IP range. Is this possible? One example is that we have an OU that includes systems from different locations. Each location has their own SW server. So, I would effectively like to do an AND function in the search.
This topic first appeared in the Spiceworks Community
Similar Messages
-
How to properly locate and "Uninstall Canon ij Network Scan Utility"
I had this same problem so I went thru my computer's specifics.
If you try doing a spotlight or "find" search for canon, canon lj network utility, etc. you'll only find a "Canon" folder, but it won't necessarily give you the information you're looking for.
Here's what I did:
First turn off the "canon ij network scan utility"
Then:
1. Click on Finder
2. Click the Macintosh HD icon (hard drive icon under iDisk)
3. Click the Library folder (make sure it's the folder with the picture on it, building with columns)
4. Scroll down to the "Printers" folder
5. Locate the "Canon" folder, then the "BJPrinter" folder.
6. Once you installed the "canon ij network scan utility" to your computer, various components will be scattered throughout this "BJPrinter" folder. Click on each folder, and check the "Date Modified" column. Every file within this folder that has a Date Modified similar to the date you installed the program, is a file with a relation to the "canon ij network scan utility." I suggest deleting them all.
7. If you're looking to make sure you're getting rid of the"canon ij network scan utility," after you click on Macintosh HD>>Library>>Printers>>Canon>>BJPrinter, click on the "Utilities" folder. In this folder you'll find a couple of utilities installed with the "canon ij network scan utility" program, but you'll also find the actual "canon ij network scan utility" program. I suggested dragging the utilities folder to the trash and disposing of it all. Do a "secure empty trash" if necessary. It may not empty right away since you still had it on the top right, so restart your computer then try to empty the trash when everything reboots.
Hope this helps.Under System Preferences, System, Accounts, Login Items, I removed the Scan Utility from the list of programs that open automatically when I log in. The program no longer starts but I fear that the program is lingering some where on my computer hard drive.
-
Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy... When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything... Very buggy.
It appears to me that network file access is buggy in Maverick.
In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
It makes impossible navigate a directory tree.
File access has been trashed in Maverick.
They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again. -
Hello,
An office I support has 2 PCs which were configured to scan from a networked LaserJet Pro 200 color MFP M276nw, recently one of them stoped scanning properly while another continues to scan.
I spent about 5 hours attempting to fix this last night and now I am reaching out to the community for assistance. I'll list out the facts and perhaps you can ponder them and get back to me:
- The PC where it functions properly has the printer installed with Web Services as the transport.
- This same PC has "HP LJ200 M276 Scan" under "Imaging devices" in Device Manger, which is ideal and lets HP Scan work correctly.
- On the bad PC, HP Scan attempts to scan and the lamp moves down the range of the flatbed, but eventually it comes back with a generic wordy message regarding a communication issue.
- I have tried driver and software removal/installation in various order, both with Web Services and using a IP port.
- I tried restating the three WIA services, and turning off the firewall.
- I have tried HP Doctor, it complained of a WIA issue at one time, at a different time it claimed that it fixed a WIA issue.
- When I install using Web Services, HP Scan does not get installed, and the device just says "WDP Scanning Device" or something of that nature.
- With Web Services, I can right-click on the device, choose Scan, and everything works fine; however this is not the HP Scan interface which has built-in PDF creation and the customer needs it because staff have been trained for it.
- When I install HP Scan, it only wants to use the "HP LJ200 M276 Scan" device and if it is unavailable or disabled it does not proceed.
- I have not found a way to get HP Scan to simply use the "WDP Scanning Device" even though it seems like that would work, even tried renaming it in the registry but perhaps it is associated with UUIDs?
Please help, thanks in advance
Mike KantorHi mekantor,
I see by your post that you are unable to scan from the one computer.
I can help you with this issue.
If the scanner drivers are installed, try and see if you can scan from Paint.
You can try and reinstall the HP scan software separately to see if that will resolve the issue.
Go to start, computer, right click on the CD for the printer installation and left click on open.
Open the setup folder, product folder, and then Scan_App folder.....HPScanLJM.....msi -
right click and select install.
If you are still having issues then do the following steps:
Do a msconfig and disable any start up programs and temporarily turn off any Antivirus Software and the Real Time Scanning. (affects the scanning software) How to use MSCONFIG.
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%.
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted.
Uninstall the software again. Uninstalling the Printer Software.
When the uninstall has completed, restart the computer.
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Openbox, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box.
In the Open box, type msiexec /regserver, and then click OK.
If you have any difficulty with this step, please use this link to perform it another way.
Restarting Windows Installer.
Run Disk cleanup from Start/All Programs/Accessories/ System Tools. <How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player. http://www.adobe.com/support/flashplayer/downloads.html
Restart the computer.
Reinstall the printer software. HP LaserJet Pro 200 color MFP M276nw Drivers.
Check for the HP Scan software and test the printer.
If it fails to install the full software, run the Print and Scan Doctor to see if you get another WIA error.
Find and fix common printer problems using HP diagnostic tools for Windows?
Please provide in detail the results if you are still having issues.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
What is up with Apple's Network not supporting Network scanning and even Ne
Hello.
I have a HP 3210 Network printer/scanner. After upgrading from my LinkSys router to a Time Capsule I now find that my HP Network scanning capability is dead. Apple tech support has admitted that they don't support scanning nor even some network printers on the Time Capsule, airport & Airport express. Apple won't even give me enough details on the issue so I can talk intelligently with HP???
What is up with that? That is completely unacceptable. I can print to my printer, I can browse the built-in web server (and scan interestingly enough using the web server), but when you try and run the HP scanning client it indicates it can't communicate with the printer/scanner.
Any ideas out there? I'm really disappointed.
Len in CanadaWhat is the deal here?
Easily explained: On or about 24 July the entire discussions.apple.com web site was moved to servers running Windows Vista Enterprise OS. The site was compromised approximately 6 seconds later by a group of Romanian hackers believed to be funded by Nigerian Internet scammers who had millions of dollars in credit to play with when hundreds of thousands of victims sent them their credit card numbers to pay what they thought were nominal fees to get some of the 100,000 missing iPhones sold the first week but according to AT&T never activated. Supposedly, a malfunction in a mail router or address machine (the story varies) inadvertently sent all these phones to a mid-ranking Nigerian official who needed financial assistance with getting them out of the country.
Well, either that or the site is still controlled by Apple & has been undergoing extensive changes which, shall we say, have not yet been completely sorted out, much in the same way that Iraq has not .... -
As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds.
If someone is calling me during that time it says mobile is either switched off or outside the coverage area.
Please helpYou may need to force it into recovery mode. See here: https://discussions.apple.com/message/17766427#17766427
-
fire fox starts by it self and goes to search site all the time please help
Possible malware infection
Do a malware check with some malware scanning programs.
You need to scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free -
Network scan - available computers
How do I perform a network scan to obtain what computers a re available on a local TCP/IP network? I mean something like "net view".I'd like to optionally specify a domain to search like in "net view /domain:MyDomain". The IPs of course differ only in the last byte 111.111.111.* for example.
Thanks in advance
MikeCould you be more specific? What should I use to implement this scheme?
Do I need an application running everywhere?
Related question:
Is there an easy way to check if an IP is available on the local network /for example just loop from 0..255 the last byte and ask each of them all to reply/? In that case how should I access the remote computers and what will give me the status /is a machine with that IP running or not/?
Of course the easiest thing I could do is use the runtime to create process executing the prompt command and processing the output but I prefer a pure solution.
Thanks in advance
Mike -
I Just updated my iPhone 4 to 7.1 oS. I am unable to connet to any network. I keep getting the "searching" No Service" messages on the top let corner of the screen. I also get a notice that says " "Unable to load network list. I need help... How can one resolve this issue?
No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that. -
Reganining (Wireless) Network Scanning after 10.8.2 update
Up to 10.8 I hab no issues printing and scanning wirelessly through my Canon MP620 whoch is connected directly to my Wireless network. They showed up as two devices (Printer / Scanner) in my System Preferences.
However, after updating to 10.8.2 - though the scanner was still there in the system prefs - it just didn't wotk anymore and would not be found.
the scanner worked well, since when connected directly to the Mac it showed up immediately and worked fine.
I tried a couple of things that didn't help before I came across the solution.
First, what didn't work:
- updating drivers through software update
- updating drivers through CANON
- reconfiguring the Printer/Scanner through Canon LJ Network Tool (Version 4.0)
- Restarting, rebooting machine, Printer etc.
What did help finally: Restarting printer system (right-click in print/scan prefs) and reboot.
Now the printer as well as the scanner showed up and could be re-added.
OPne more glitch I had to overcome was that the scanner was detected, yet it gave me a communication error that went away, after I printed the first page.
Now, everything works as expected.
Since there is a lot of discussions about this going on I thought I'd share this.Very strange, you're not the only one with the old build#... I wonder...
Hmmm, did you try the direct download & install method?
http://support.apple.com/kb/DL1611
I think that's it, but shows the original date!? -
Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7?
Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7 64bit? It must be the Windows 7 driver of Scanto.msi. Thank you for your support.
This question was solved.
View Solution.Hi,
Unfortunately any HP Software component (HP Toolbox, HP Scan, etc.) for this product support 32-bit envoirnment only.
As you may find by the User Guide, only basic Print and Scan drivers provided for 64-bit (Page 14):
http://h10032.www1.hp.com/ctg/Manual/c01072750.pdf
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
what do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?
Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
“SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
Here is my original post explaining what I had already tried:
“Hi all,
I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
Can anyone help? Please?!
Thank you!!!
P.S. We have a PC, with Windows XP Home.”
Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
Tiffany
P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution. -
The error
Therewas a problem downloading iOS 3.1.1 software update for ipod touch. an unknownerror occurred (8288). Please check that the connection to the network is active and tryagain.
Keeps coming up when I try upgrading iOs 3.1.1 software to my 8gb 1st generation iPod touch! Please help! I've looked at all other posts related and none helped.Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
“SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
Here is my original post explaining what I had already tried:
“Hi all,
I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
Can anyone help? Please?!
Thank you!!!
P.S. We have a PC, with Windows XP Home.”
Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
Tiffany
P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution. -
I have Adobe Reader XI with the package that allows me to send pdfs and convert pdfs to Word. When I open a pdf and try to search the search shows no matches even though the word I am searching for is in the document. Any suggestions how to search?
Once again, my thanks for your assistance. If I may impose on your generosity one more time, if I understand you correctly if I create a document on Word or WordPerfect, print it and scan it to create a pdf, the search function will not work. But, if I create the pdf document in Word the search function will work. Unfortunately, I am not sure how I create a pdf document in Word other than by printing it and scanning it. Could you please explain.
William B. Kohn, Esq.
General Counsel
Paul V. Profeta & Associates, Inc.
769 Northfield Avenue
Suite 250
West Orange, New Jersey 07052
(973) 325 - 1300
(973) 325 - 0376 (Facsimile)
[email protected]<mailto:[email protected]> -
Canon MP600R WiFi Network Scan/Print Failure
Hi there
My setup:
* a Canon MP600R multifunctional printer/scanner
* an Apple iMac running Snow Leopard
* a Dell Laptop running Windows Vista, and
* a Netgear WGT624v3 wireless router.
The printer and the two computers are all wirelessly connected to the router - there are no USB cables or wired LAN connections being used between these machines. All the machines have statically configured IP addresses (printer included).
I can print and scan reliably from/to the Windows laptop. Printing from the Mac used to work reliably, but scanning to/from the iMac only worked once in a blue moon.
To try to fix this, I updated the drivers on the Mac to the latest versions for Mac OS X 10.6 (Snow Leopard), and now I can't print or scan at all. The software I've been using is:
From Canon Europe:
* mp600rosxcp102620ea8-2.dmg - CUPS Printer Driver for OSX (10.26.2)
* mp600rosxns10ea7-3.dmg - MP Drivers for Network (Snow Leopard) (1.00)
* mp600rosxsd12131ej7.dmg - ScanGear CS for OS X (12.13.1)
* mpnosx304ej7.dmg - MP Navigator- MP Navigator for Mac OS X (3.04)
From Apple:
* CanonPrinterDrivers2.3.dmg - Apple's Canon Printer Drivers (http://support.apple.com/kb/DL899)
From Canon Australia:
* ntosxm270ea8-2.dmg - IJ Network Tool Ver. 2.7.0
After many delete/reinstall steps on the Mac (following PAHU's advice!) and much Googling - including disabling/enabling firewall settings, IPv6 settings and even various router RIP settings - I could do with some help please!
What appears to be happening is that the Mac can't 'see' the printer, whereas the PC can - the drivers all seem to be installed in a similar way, and once set up (using the one-off USB connection step that the installers seem to like) they all have the right MAC address info. However the Mac Network Scan Utility shows a warning next to the printer's MAC address, whereas the PC is happy. Likewise, the PC's printer utilities can tell me about ink levels, the Mac's one gives me a communication error and puts the printer into paused mode.
This leads me to believe it was something going on on the network. I can, however, ping the printer from the Mac and access it's web configuration interface - so it's not that the printer's unreachable from the Mac.
To try to see what was going on in a bit more detail, I installed Wireshark and did some captures of the use of the Network Tool and Scan Utility.
On the PC (192.168.0.4), which works, it appears to direct the BJNP discovery commands direct to the printers IP address (192.168.0.2).
On the Mac (192.168.0.5), which fails, it appears to be broadcasting BJNP discovery messages to the subnet (192.168.0.255) and receiving ICMP Parameter problem responses from the printer.
So, is this likely to be:
A. the Canon drivers on the Mac
B. the Netgear router doing something to stop the broadcast discovery, or
C. something in the printer firmware?
If so, any ideas how to workaround it - for example, can I 'force' the Mac version of the drivers to not do broadcast discovery and simply go direct to the IP address like the PC?
Any help, pointers, gratefully received!Hi PAHU
Thank you very much for responding - particularly with such detailed and reasoned advice!
I have just tried deleting the BJPrinter folder, restarting and reinstalling only the Apple Canon Printer Drivers 2.3. On opening Print & Fax -> Add Printer I don't see anything in the window (no Bonjour Scanner or canonijnetwork) - I have left it open for more than 20 minutes now and still nothing.
Using wireshark, I can see the Canon BJNP Discover packets to both 8611 and 8612 (and some mdns and db-lsp-disc packets). I can see the printer responding with error responses too:
45620 12463.295007 192.168.0.5 192.168.0.255 canon-bjnp1 BJNP Printer Command: Discover
ffffffffffff001d4ff85a7a08004500002c9b21000040115d 4bc0a80005c0a800ffdd9521a30018ec93424a4e5001010000 0001000000000000
45621 12463.295093 192.168.0.5 224.0.0.1 canon-bjnp1 BJNP Printer Command: Discover
01005e000001001d4ff85a7a08004500002c332f00000111e5 e3c0a80005e0000001dd9521a30018ce39424a4e5001010000 0001000000000000
45622 12463.415604 192.168.0.2 192.168.0.5 ICMP Parameter problem (Pointer indicates the error)
001d4ff85a7a000085847dde080045000024b3c70000400145 bac0a80002c0a800050c00f3ff000000000000000000000000
45623 12463.416790 192.168.0.2 192.168.0.5 ICMP Parameter problem (Pointer indicates the error)
001d4ff85a7a000085847dde080045000024b3c80000400145 b9c0a80002c0a800050c00f3ff000000000000000000000000
This pattern repeats every 8 seconds or so for the scanner and roughly every 25s for the printer port.
This extract (while typical of what's happening now) was actually taken from a lengthy capture I made yesterday which shows that, after quite a long period of time, it suddenly starting to work. This fits with my previous experience of seeing it 'coming and going' very intermittently (e.g. when leaving Add Printers open for an hour or more). When it started working it looked like this:
45637 12488.297178 192.168.0.5 192.168.0.255 canon-bjnp1 BJNP Printer Command: Discover
ffffffffffff001d4ff85a7a08004500002ce8240000401110 48c0a80005c0a800ffc1d021a300180859424a4e5001010000 0001000000000000
45638 12488.297260 192.168.0.5 224.0.0.1 canon-bjnp1 BJNP Printer Command: Discover
01005e000001001d4ff85a7a08004500002cc6670000011152 abc0a80005e0000001c1d021a30018e9fe424a4e5001010000 0001000000000000
45639 12488.307919 192.168.0.2 192.168.0.5 49616 BJNP Printer Response: Discover
001d4ff85a7a000085847dde08004500003cb3cb0000401145 8ec0a80002c0a8000521a3c1d00028b712424a4e5081010000 0001000000000010000108000604000085847ddec0a80002
45640 12488.308037 192.168.0.2 192.168.0.5 49616 BJNP Printer Response: Discover
001d4ff85a7a000085847dde08004500003cb3cc0000401145 8dc0a80002c0a8000521a3c1d00028b712424a4e5081010000 0001000000000010000108000604000085847ddec0a80002
The only thing I could see different between the discovery packets were the id and the source port - so I'm really puzzled as to what could be going on here!
Do you have any ideas? And does this change your percentage probabilities at all?!
(BTW the only traffic seen on the Mac between it failing and it working is:
45624 12463.739808 192.168.0.5 17.72.255.11 ntp NTP NTP client
45625 12463.774362 17.72.255.11 192.168.0.5 ntp NTP NTP server
45626 12478.606981 192.168.0.5 255.255.255.255 db-lsp-disc DB-LSP-DISC Dropbox LAN sync Discovery Protocol
45627 12478.607356 192.168.0.5 192.168.0.255 db-lsp-disc DB-LSP-DISC Dropbox LAN sync Discovery Protocol
45628 12478.668319 192.168.0.2 192.168.0.5 ICMP Parameter problem (Pointer indicates the error)
45629 12478.669571 192.168.0.2 192.168.0.5 ICMP Parameter problem (Pointer indicates the error)
45630 12480.098770 192.168.0.1 192.168.0.255 router RIPv2 Response
45631 12481.432048 192.168.0.5 192.168.0.255 netbios-ns NBNS Name query NB WORKGROUP<1d>
45632 12481.702507 192.168.0.5 192.168.0.255 netbios-ns NBNS Name query NB WORKGROUP<1d>
45633 12481.972805 192.168.0.5 192.168.0.255 netbios-ns NBNS Name query NB WORKGROUP<1d>
45634 12483.890302 192.168.0.5 192.168.0.255 netbios-ns NBNS Name query NB <01><02>_MSBROWSE_<02><01>
45635 12484.160651 192.168.0.5 192.168.0.255 netbios-ns NBNS Name query NB <01><02>_MSBROWSE_<02><01>
45636 12484.430912 192.168.0.5 192.168.0.255 netbios-ns NBNS Name query NB <01><02>_MSBROWSE_<02><01>
)
Maybe you are looking for
-
Master Data: 2 records with different FROM-TO dates
Hi, I am extracting the master data from R/3. In R/3 the master data record is created with valid FROM: 01/01/1900 and valid TO: 12/31/9999. But when I extract the data into BW it is coming as 2 records one with 01/01/1000-12/31/1899 range and the ot
-
Friends, Because it is necessary to extend the schema in Active Directory when you install the Logon Manager ESSO. Thanks.
-
We have a computer lab with eMacs running Mac OS X 10.3.4 and 512 MB of RAM. We bought an academic volume license of Final Cut Express HD 3.5 and I have been trying to install it on the computers but a message saying that it is impossible to install
-
Hi, I have a Acrobat Plugin component implemented using the Acrobat SDK and now I would like to replace this SDK with the Adobe PDF Library SDK. Is this option would be possible? Thanks & Regards, Abdul Rasheed
-
Where's the square bracket key?
Hey guys. I'm using a Dutch azerty keyboard and I can't find the square bracket keys. I need 'em badly for programming. How can I type them?