Network Setup for a 1232AG config with multiple AP's

I'm looking to deploy a temporary outdoor network using 1232AG radios, with only one radio connected to Ethernet & Internet. All the other radios will have a A radio connection to the parent. And their
G radios will advertise for Client Access. Ultimately I'd also like to have the local ethernets active on each of the remote Radios, so that a switch could be setup for people who don't have Wireless.
So the questions, Is this type of setup even possible? If I use the A radios for back haul, and the G radio for Client Access, does the Ethernet get disabled?
What station-role in the network should each of the radios play. Ultimately I believe we could have different SSID's and IP Subnets for each AP, but if we kept them all the same, can we make this one big Bridge? So that someone can Roam between AP's. Granted I don't have the funds for Wireless Lan Controller. Sugestions?

So what you are trying to do is have some sort of MESH outdoor wireless, but using the 1232AG? Don't think you can do this by using the bridge role. You would have to go bridge to bridge and then have an ap connected to one of the bridge to handle users...

Similar Messages

[Non IE Regression] Support for full screen mode with multiple monitors

This seems to be a regression with Flash Player v11.2.202.x (for all other browsers).
With Internet Explorer it is still working.
http://kb2.adobe.com/cps/890/cpsid_89050.html
== Support for full screen mode with multiple monitors ==
Full screen content will remain in full-screen on secondary monitors, allowing users to watch full-screen content while working on another display.
Tested on Windows 7 x64 SP1 with:
- Internet Explorer 9
- Firefox Release, Beta, Aurora, Nightly
- Opera 12 build 1116
In bugbase.adobe.com I cannot choose v11.2.x

Please vote for it If you have the same problem:
https://bugbase.adobe.com/index.cfm?event=bug&id=3016912
Thanks

HT4557 whats the best itunes/appleID setup for family of 3 with 3 ipads, 3 iphones, one PC with all music on. if we use 3 separate ones how do we share purchased and home content?

been with apple for years. one itunes/appleID in use for family - all purchases and downloads on the one account..
now got 3 ipads, 3 iphones and when we update the software, we seem to get text/facetime issues due to multiple email addresses and phone numbers for the different devices that each individual uses. For example, I send a text and it appears to have come from my wife or son to the recipient. Not good !
there seems to be direction from apple that each of us should use our own apple id, thogh how do I link the accounts so enable family sharing of music/media we have purchased etc - Id also like to be able to review and keep a private eye on what my son downloads as he is 11 yrs old ! I manage this currently as we allow him access to the password for itunes (as we all use the same id today)
Am i better setting up accounts for my wife and son independent of my own, or not. Each of us would like access to the family content we have and the master library of synced content. I just want the most simplistic approach that apple, or others would recommend.
Is there a better or optimum setup for a family as we cannot be alone.....

Thanks for the help, but a follow up question now.
My iPhone won't arrive for a little while, but my wife already got hers and she wants to set it up now. Using my Apple ID for the purchases, if she starts setting hers up, can she change her iCloud ID to something else quickly? It keeps telling us that we have to sign in with the AppleID first.
Should we just set up an iCloud account via normal internet before trying all this via iPhone?

Network Setup for 10g RAC

We are planning a 2 node RAC cluster with nodes in two room on a single site. The shared storage will be on a SAN which is replicated/mirrored (via the SAN) to a second SAN in the second room.
Setup
room A :- Node A SAN A
room B :- Node B SAN A
Room B :- mirrored copy of Data on SAN B
(both SAN and Host are capable of connecting to each other through SAN infrastructure)
My question /issue is around the IP network
The plan is for both node A and Node B to have 3 or 4 network connections
1 - Public Net
2 - Backup Net
3 - Private Net
4 - VIP addr - on the Public Net interface
My question s are
1 Do the Public Nets for both Nodes have to be on the same Vlan(subnet) or can they be on different Vlans (subnets)
eg
room A Public Net = a.b.1.0/24 (say gateway is a.b.1.1)
room A Host A public IP = a.b.1.20
room A Host A VIP = a.b.1.21
and
room B public Net = a.b.2.0/24
room B Host B public IP = a.b.2.20
room B Host B VIP = a.b.2.21
assume that there are other host on both networks
Will this work ??
How does the RAC nodes load balance across both nodes ? and are the VIP addrs used to achieve load balancing ??
Second question
While I can connect both room via a private network without routing (via dedicated fibre to two dedicated private net switches. I could save $$ by using a private vlan routed to each room Say a /29 network ( a.b.3.0/29)
Can I connect the private nets via a routed vlan ?

The public IP's all have to be on the same subnet.
Ie, the first 3 sets of number for the IP address
must be the same for the public and virtual IP's.
There are no options in that.Not necessarily, but probably most often correct. If the subnet mask is something other than 255.255.255.0, then the statement above may not hold and/or may not be sufficient. The public IPs and VIPs all must share the same subnet, that much is always correct. What constitutes the same subnet may vary based on the subnet mask used in your network.
For example, if the subnet mask is 255.255.254.0, then 172.16.172.4 and 172.16.173.12 are on the same subnet. Conversely, if the subnet mask is 255.255.255.128, then 172.16.4.2 and 172.16.4.210 are NOT on the same subnet. If you're not sure, consult a network admin--there are also plenty of online tutorials regarding subnet masks and how they work.

Optimal Setup for New Time Capsule with Wireless AC

I'm curious to see what the hypotehtical optimal setup for my Time Capsule. I understand that wireless speeds depend on a ton of factors and that part of getting the best connection is just trying different options. I have a new Time Capsule that's connected to the following devices: iPhone 5S; new MacBook Air with wireless AC; old iMac from 2007; old AirPort Express that only supports b/g and a newish Apple TV that supports wireless N, I believe. I was connecting to the network (which was not designated with the 5ghz) and I recently chose the option to label the 5ghz. I'm using that now to stream music with the new iPhone and the Apple TV with no problems, but I have no longer have the option of using the old Airport express because it's an old one. I'm thinking of just getting a new Airport Express and leaving it at that, but wanted to know if anyone has some thoughts on this. I'm sure there's a more concise and direct way to ask this question, but my knowledge is pretty limited here. Thanks in advance.

The Time Capsule is already set up for optimal performance when you open up the box.
You can assign a separate name to the 5 GHz network and point devices that are capable to that network. This works well if the device is located close to the Time Capsule.
But, 5 GHz signals are much weaker than 2.4 GHz signals, so once you move a room or two away, or the signal has to pass through several walls, the 2.4 GHz will be stronger.....and probably faster as well.
But...your device will try to stay locked on the 5 GHz network since you set it up that way.
This type of setup may or may not work best for you. For most users, it is simpler and more effective to use the default settings on the Time Capsule to have both bands use the same network name.
Then, your wireless devices will automatically connect to the signal with the best quality. Best quality may not be the fastest signal since there are lot of factors involved with signal quality. But, if you think about it a bit more, don't you want to have your wireless device connect to the signal with the best quality?
Some users swear by assigning a separate name to the 5 GHz band. I'm not one of them, but If it works well for them and they are happy, then there is no reason to change.
An older AirPort on your network is going to drag down the speeds. You need the new AirPort Express, or better yet an AirPort Extreme if you want to be able to extend the new 802.11ac signal.

What would be the best network setup for me?

I am planning a network system for my medical practise. The network will comprise a Macbook Pro(myself) , an Imac(receptionist) and a Macbook for occassional admin use.
I need some advice as to the best way to store the shared data. I will be using Filemaker Pro and will be storing patient appointments, demographics as well as clinical info, visit notes and investigations.
I am considering 3 possible setups
Have shared database on the Imac, backed up by a 500 gigabyte hard disk, or possibly a time capsule, using Time machine.
Have an ethernet hard disk for storage, but then I probably would need to have a different backup system.
Use a mac mini as a file server.
Or use an altogether different setup.
I would appreciate suggestions.
Thank you
ajdk

Hi ajdk-
Then it comes down to your morals and how carefully you want or need to protect patient confidentiality. Your basic network concept should work.
As a start, storing any patient data with regular business data and emails is asking for a security breach.
Make sure to back up your back ups and store said backup securely in a media-rated fire proof vault.
These documents may help:
Creating a small Ethernet network
AirPort Base Station and Network Setup Guide (Mac OS X 10.4 or earlier)
Luck-
-DP

Dynamic routing for a Business Service with multiple operations

I have two business services with multiple operations. Business service A (bsA) has operations OpA1 and OpA2. Business service B (bsB) has operations OpB1 and OpB2.
Depending on incoming Proxy message and operation, I have to do one of the following
1. If someValue = A and operation= Op1 then invoke operation opA1 of bsA
2. If someValue = B and operation= Op1 then invoke operation opB1 of bsB
3. If someValue = C and operation= Op1 then invoke operation opA1 of bsA AND* operation opB1 of bsB and return aggregate data of both invocations
1. If someValue = A and operation= Op2 then invoke operation opA2 of bsA
2. If someValue = B and operation= Op2 then invoke operation opB2 of bsB
3. If someValue = C and operation= Op2 then invoke operation opA2 of bsA AND* operation opB2 of bsB and return aggregate data of both invocations
Using a dynamic route node or dynamic routing options, I am able to achieve cases 1, 2, 4, and 5.
But for cases 3 & 6, I can not use a route node. When I use a Service call out instead, then I am forced to create a Operational branch but that does not seem like the best design since for every new operation added to the business services, I have to add a new branch to the Operational branch and redo all the functionality for that branch.
Basically, I am looking to achieve the functionality of the Route node ( no need to specify the operation ).
Any thoughts/ideas on what the best design would be?
thanks

For cases 3 & 6, why don't you route to another proxy service where you can simple do two service callouts, merge output data somehow and return them to the first proxy?
If you look for "special route feature", that could possibly call two services for a single message, I'm afraid you won't succeed.

Examples for good programming practice with multiple DAQmx tasks

I'm writing a program to continuously log data from 8 counters, 8 encoders, and 8 voltages. The proof of concept VI with a single counter was simple and elegant, but scaling up to all signals resulted in a wiring mess. I've been working through the Labview Core courses, and am currently on Core 3. I still haven't come across a discussion on how to work with multiple DAQmx tasks without making a mess of the block diagram. Can anyone point me in the right direction?
Also, say I have a state machine that has a configure, idle, and logging states. I need to set the initial values of the encoders during configuration, and keep up with their changes while in the idle state so I have appropriate starting values when entering the logging state. Can anyone point to an example that shows how this might be accomplished?
Thanks

I'm very familiar with AE's/Functional Globals - but I have struggled in the past with handling multiple DAQmx tasks - particularly when you're using multiple devices and using different types of measurements which require seperate tasks/handling (e.g. such as thermocouples which require extra compensation).
I'm not even sure I know whare the requirements are for needing multiple tasks - I know you can need multiple tasks for a single device if the type of measurement is different but can you share an Analogue Input task amongst multiple devices?
I think in hindsight (and without too much thought now) it looks like a good case for Object Oriented LabVIEW - with a base DAQmx class (initialise, configure, start, acquire, stop, close etc.) and then child classes for each type of measurement (with one task associated with each - and private data unique to that specific class). You then hold an array of objects (one for each task) and iterate through each one with dynamic despatch to get the data.
I don't know your particular experience level of using LabVIEW (and as such, OO may not be appropriate) - but as a wider discussion of 'best practice' it seems like an appropriate method I would use going forward.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

Display only one row for distinct columns and with multiple rows their valu

Hi,
I have a table having some similar rows for some columns and multiple different rows for some other columns
i.e
o_mobile_no o_doc_date o_status d_mobile_no d_doc_date d_status
9825000111 01-jan-06 'a' 980515464 01-feb-06 c
9825000111 01-jan-06 'a' 991543154 02-feb-06 d
9825000111 01-jan-06 'a' 154845545 10-mar-06 a
What i want is to display only one row for above distinct row along with multiple non distinct colums
ie
o_mobile_no o_doc_date o_status d_mobile_no d_doc_date d_status
9825000111 01-jan-06 'a' 980515464 01-feb-06 c
991543154 02-feb-06 d
154845545 10-mar-06 a
regards,
Kumar

Re: SQL Help

SO creation for one internal item with multiple customer code

Hello,
We want to create sales order for one internal product for one customer with multiple customer product code.
SAP allows only one to one relation in customer info record. Is there any work around for having multiple customer product code for our single internal product code in single sales order.
Regards,
Balu J Karbhari

Hello,
It is not possible. Please check OSS note 626931.
One alternative approach might be to trying to use the material determination functionality. Please try the below steps and check if it works for you.
T Code VD51: Create CMIR for Customer & Material
T. Code VB11: Maintain material determination for all required materials to point to the Material which has the CMIR.
T Code OVRQ: Substitution reasons. Make the configuration to print Original material . Check the column ENTRY, so on output the original material will be printed.
Hope this helps
Regards
Sai

How to Network setup for Lazerjet 6P

I have a lazerjet 6P set up in a PC network and it is shared. I can see it from the Mac air but it won't print. What am I missing ? Please step by step as I am somewhat new to MAC ( It is a transition but well worth it !!!!)
Thanks

What you can try is enabling Windows SMB sharing on the Mac. On the Mac Log into your Windows computer to view something that is shared on the Windows PC, like a hard drive or even just a folder.
Make sure the Windows firewall is turned off (If you are bhind a router you don't need it turn on).
What version of Windows is running on the PC? Win 7, XP, Vista??? Do you have passwords set on the Windows PC?
But in the end I have never gotten my Mac to print to any printer connected directly to a Windows computer. No matter what I try. No matter what permissions I have set on both system. No matter how I connect to the Windows PC over the local network. For me it has never worked and I'm fairly skilled in networking.

Using Content Query webpart for specific Document library with multiple managed metadata - Document with multiple metadata tags not showing up

Hi,
I am having an issue where when I insert a Content Query webpart into a page, and filter to managed metadata, all the right documents show up except one document that happens to have two metadata tags attached to it. The content query webpart is set
to only look through a specific document library. I'm not sure what I am doing wrong.
Here is the one document with two metadata tags:
Below is the Content Query:

Hi,
As I understand, you did not get the results with multiple metadata tags through Content Query web part in SharePoint 2013.
Check things below:
1. Check if you have set the item limit more than the display items in Presentation section of the web part. If the item number more than item limit, the rest items will not show.
2. Check if the item you cannot find uses the content type you have set in the content type section of content query web part.
When you edit the properties of the item, you will see the content type the item is using.
Best regards
Sara Fan
TechNet Community Support

Network Setup for a 1242G LWAPP config for with Bridge

Hi all,
I'm trying to find solution for mobile vehicle. The base wifi system is lwapp with controller and AP.
I was thinking to make bridge between LWAPP AP's and Autonomous AP on the mobile vehicle with client behind the AP, but now the vehicle will have 3 clients so I will have to put something behinds so I will have to put switch behind
does that solution seels good or does I need to choose wifi router ?
according to me keep an Autonomous AP was good idea.
is it possible to make the AP works with PEAP and other high level security like EAP-TLS and more ?
thanks in advance
hope you will tell me your opinion
Matt

Matt this should be pretty simple to do. You said that your base wifi system is controller based with LWAPP AP's correct?
Assuming you already have PEAP in your current operation, all you would need to do is take your Autonomous AP and make it a WGB. From there you could plug in any switch that you wanted for you 3 clients. If you need help with configurations let me know and I will help you out.

Network topology for extending wireless range with WAP321

Hi all,
I have an WAP321 accespoint connected to my router/firewall. There are 2 SSID active each assigned to a different VLAN. Now I want to extend the range of my wireless network and looking into options.
Adding another WAP321 is the first thing on my mind. When I read the documentation the cluster option looks perfect for me.
The only thing I don't find in the documentation is if the second WAP321 should be hard wired with the LAN for the data connection. I don't have the possibility to get a network cable to the second WAP321 location. So I am looking for a repeater with respect to multiple SSID's.
Does clustering solve my problem?
Regards,
Martin.

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
The option that you need to use is WDS Bridge. To use this you need to have two WAP321's as bridging to like WAPs is only supported. (121 to 121, 321 to 321)
Is only for ease of management and not for extending.
This is easy to setup and there is good detail in the admin guide and in help in the GUI.
Here is an abbreviated version:
To configure a WDS bridge:
Click Wireless > WDS Bridge in the navigation window.
Select Enable for Spanning Tree Mode
When enabled, STP helps prevent switching loops. STP is recommended if you configure WDS links.
Select Enable for WDS Interface
Configure the remaining parameters:
Repeat these steps for up to three additional WDS interfaces.
Click Save. The changes are saved to the Running Configuration and to the Startup Configuration.
Thanks
Eric Moyers .:|:.:|:.
Cisco Small Business US STAC Advanced Support Engineer
CCNA, CCNA-Wireless
866-606-1866
Mon - Fri 09:00 - 18:00 (UTC - 05:00)
*Please rate the Post so other will know when an answer has been found.

Step by step complete setup for WRT54G ver.6 with Laptop and XBOX 360

Hello. I am sorry to post this, I am sure it is a juevenile and redundent question...but I have tried to look for the set up cd (I can find where to download it...though I can find the firmware upgrade or whatever). My friend at work said it would do all the setup pretty much automatically for me.
I somewhat know computers, but you might go ahead and make your replies VERY lamen's terms or I might not be able to follow. Anyways, what I need, is a step by step/screen by screen directions for a secure network. I have made a partial attempt at setting it up and it technically works, but I would feel better if I did the steps a-z in order, so I know that it is done correctly. I also am not totally confident in its security as it is now. (Also, technically, I did not check the XBOX again after getting the new laptop, I am just assuming it is still working because it was before).
My problem is I can't seem to find very good directions for setting up the router...I only find partials or confusing directions.
So here are the things I am trying to connect:
Liksys WRT54G ver. 6
Gateway Laptop running Windows Vista
XBOX 360 - WIRED
(I had a PC and a laptop, but they both died at the same time and I have only been able to replace the laptop at this point...the PC will come later and not sure at this point if it will be Wired or not).
I have a cable Modem between the Router and the wall...I didn't look at that for brand/etc...but I can get it ASAP if needed.
Here are the settings that I have so far:
Changed the Router Name
Changed the SSID
Have DHCP set to 3 (XBOX, PC, Laptop)
Wireless SSID Broadcast: Disable
Username and Password changed to my own info
UPnP: Enable
I may have changed other things without knowing it. So like I said, a complete, step by step screen by screen set up would be totally appreciated. I haven't done anything in the security tab, all that is totally foreign to me, so I am just not broadcasting for now until I can get some help setting things up with you guys.
And if someone is familiar with the Laptop/XBOX 360 setup, and I need to change any of the settings on the XBOX itself, could you please include that in your directions? I know that isn't technically what THIS forum is for, but it would sure be helpful to me if you happen to know both parts anyways.
Thanks a lot (in advance)!

So all you just need to do is, secure your Wireless Network. Follow the setps bellow and change the settings on your Router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Now see if you can locate your Wireless Network and attempt to connect...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Network Setup for a 1232AG config with multiple AP's

Similar Messages

Maybe you are looking for