Network sizing for SAP printing

Dear all,
We are in the midst of sizing network bandwidth requirement for SAP implementation which involves some remote locations. Actually Iu2019ve gone through the documentation (Front-End Network Requirements for SAP Business Solutions), and found the way of calculating the network requirements based on number of users (C = N * D * X * 0.25 formula), however Iu2019m not sure if the formula does include the SAP printing bandwidth requirement. Appreciate if you can shed some lights on SAP printing network sizing guide or sort.
Best regards
Rolando

Thanks Susanne,
Understand we need to rely on the information on how much the printing requirement is to come up with the estimation on SAP printing bandwidth requirement.
Perhaps you have some experience on the size of 1 page of SAP printlist (plain text) ? Is it safe to have assumption that 1 page of print list would have 20-30 KB in size? And ones with pictures/logos are 100-200KB in size?
Best regards
Rolando

Similar Messages

Limiting network bandwith for SAP printing

We are usinge ERP 6.0 (Win / MSSQL). One of the issues we are facing is that SAP printing take too much network bandwith.
Our network bandwith between Datacenter and office is 1Mbps.
Is ther any way to limit the use of network bandwith for SAP printing. Let's say up to 30 % of bandwith is assigned to SAP printing.
Thanks.

Hi,
I am not aware of such way to "assign" bandwidth. For this reason you need to do precise network capacity planning and start the printing only when you do not have a peak of other important activities.
Best regards.
Sylvia

Hardware Sizing for SAP

Hi experts,
Can anybody share ADM115 Hardware Sizing for SAP with me?
If you have this document then please share with me,
Thanks,
Sudip Saha

Distribution of Copywrited material is Illegal.... and so is asking for them.
This thread is officially closed!
Regards
Juan

NetWorker Module for SAP/Oracle

Legato has NetWorker Module for SAP R/3 on Oracle and
NetWorker Module for Oracle. Which one is better for a
large SAP database over 1TB?

Hi,
we are using
Module Name: Legato NetWorker Module for SAP R/3 with Oracle @(#) Module Vers: 3.0.1
for SAP R/3 Enterprise 4.7x110 with 6.40-Kernel.
Regards
Jürgen

Sizing for SAP CLM

Hi experts I would like to know how can I create a sizing for CLM, I tried in SAP quiclsizing page but not found nothing.
Some help will be welcome.
Nilson Fonseca

Solved
Must go to http://service.sap.com/instguides - SAP Business Suite Applications - SAP SRM - SAP E-Sourcing 5.1/ SAP CLM 2.0 - SAP E-Sourcing 5.1 Sizing Guide
Thanks
Nilson

Sizing for SAP BCM (Business Communication Management)

Hi All
We have to provide a server sizing to be used for SAP BCM (Business Communication Management) module which will be intergrated with SAP CRM and is to be used for call support. As far as we have reached, we require a Windows server and will host MS SQL database with an approx consumer data of 63 lacs consumers.
Please specify the sizing for this server
Thanks in advance
Lokesh

Sorry, forgot to ask how much physical memory you have on each host.
Let's split it to 2 topics.
1. For ECC, since OracleDB and non-unicode page which are the 2 major factors won't be changed, so I would think here we could just do a math, as long as host A has enough memory which is allocated for Oracle and ECC (extended memory) on host B to be added up.
2. For EP, memory tuning size is basically the same for HP JDK and SUN JDK, that each server node is allocated approximately 2.5GB RAM. Besides, 0.8-1GB RAM needs to be left for OS kernel. But in your case, host B is currently holding 200 users which is a big jump for host A(note: only active user quantity matters here).
That's fine if main physical memory is a little short for host A, utilizing multiple less powerful servers as 2nd tier application server to do the load balancing is also a solution with lower TCO.
Regards,
Effan

Initial Sizing for SAP MDM

Need help on the initial sizing for hardware - app and db servers for SAP MDM 7.1 running on AIX and DB2.

Hi,
You can find all MDM guides at - https://websmp102.sap-ag.de/installmdm71
Sizing Guide -
https://websmp102.sap-ag.de/~sapidb/011000358700001921872008E
Thanks,
Shambhu.

Crystal Reports for SAP Print Output requirements like Sales Order O/P

Hello,
Has anybody used Crystal Reports for Sales Order or Invoice Print Output type requirements?
Typically these outputs get triggered via Output Management Configuration on Save of a Sales Order or Configuration.
Traditionally in the Output Management configuration of say Sales Order, we can specify the "Output Program" and the "Sapscript" or "Smart Form" or "Adobe Form".
How do we tell SAP t trigger a Crystal Report output if it is a feasible way to go?
Also can anybody tell what is SAP's strategic direction for Print Output requirements?
regards,
Atul

Hi Atul,
Do you have answers for your questions? If so, could you please share?
Thank you in advance,
Joã

Left Margin for SAP Printer

Hi all,
one of our printer is printing with left margin 45mm. how can i reduce this margin to 15mm.
i tried to put negative value in "Horizontal move" under output attributes in SPAD, but seems it does not work.
please provide me the solution as it is very very urgent
thanks in advance.
Regards
Aijaz

lol thank you....but not helpful. I have one. All it says is first line should be flush with left margin and subsequent lines are indented. Already knew that. And with any other system other than MAC I could just click a box that says hanging line but since I have to input the amount myself in this pages system it makes it more difficult.

SAP Printing using Berkeley Protocol

Dear All,
I am very new to SAP. I wanted to know about the settings required for SAP printing using Berkeley protocol.
We have SAP server (which is running in a remote place), client (in our work location) and a printer (in our work location). All are connected to through the same network.
1. Consider SAP Server IP is IP_X and name is Name_X
2. Consider SAP client IP is IP_Y and name is Name_Y
3. Consider printer IP is IP_Z and name is Name_Z
Can any one of you can tell me how to configure the settings so the SAP printing from SAP client is possble through Berkely protocol.
Also, please tell me what all are the pre-requisite required for the settings.
Regards,
Sathya

Hi,
I have tried using the standard LB_ZEB2 device driver and this problem is now solved.
Best Regards,
Ida

HANA Sizing for Business Suite Systems (Compression)

Hi Experts-
We ran the HANA memory sizing for our ERP and SRM systems (both are on
NW 7.4, ECC is on EHP7 and SRM is on EHP3). We followed SAP Note "1872170 -
Suite on HANA memory sizing report" to complete this task.
We are little surprised by the results as we don't see much compression in the target data in HANA DB. I have attached the screen shot of a ECC system with the message which has the spool results. We are getting a difference of only about 100 GB from before in terms of size and compression. The original size of ECC system is 1.1 TB.
What is general compression achieved in Business Suite migration to HANA DB? (if anyone has done that so far).
-Amit

Amit,
in this FAQ Sizing for SAP Business Suite powered by SAP HANA you can research more information about sizing.
In this FAQ is also a link to a HANA sizing white paper, which explains the results of the sizing reports.
thank you
erich

HP Deskjet 1280, SAP printer drivers.

We are using an HP Deskjet 1280 for SAP printing. It works fine but cannot print lines on SAP reports containing lines or tables. If you know of any drivers that I should be using for this kind of printer is SAP, I will be very glad to know.
Thank you in advance.

HP is not supporting this printer in Snow Leopard. You will need to use third party drivers to print. The Gutenprint drivers should already be installed on your system. If not, you can download a copy of the latest version at http://gutenprint.sourceforge.net/MacOSX.php. These drivers do not support duplex printing.
The other choice is the hpijs package found on the OpenPrinting.org page http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs.

Hi, I am looking for a printing solution for iPads in the office space, my question is how can I print from iPads and if the iPads are connected to a wifi router on a network would I be able to print from a networked printer?

Hi
We are looking at placing iPads in our offices but need to understand the printing options available? I have a number of questions?
1/ Would I be able to print to a networked printer?
2/ what would be the best WIFI Printer available for extensive printing?
3/ Are there any other printing options available?
Thank you in advance!

The roll over logs all have the same name exact the extension is .lo_ , So.. I'm not sure what you are looking for.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

HP LaserJet Printer Network Replacement for AppleTalk

Have found the fix for making the HP LaserJet 2100 TN work on an Ethernet network with Snow Leopard OS. The key was finding the address of the LaserJet on the network. This was done by holding down the two buttons on the top of the printer simultaneously for five seconds. This causes a ‘JetDirect Configuration Page” to print. On that is the IP Address of the printer.
With that information, open the ‘Print and Fax” page of the Systems Preferences. Under the list of printers click the ‘+’ sign. This open a dialogue box. Click the ‘IP’ icon at the top. Under Protocol, chose HP Jetdirect – Socket. In the Address space enter the IP Address of the printer. In the Name space enter ‘HP LaserJet 2100 Series’. You may have to select the print driver from the drop-down menu at the bottom of the page, or it might self select. Then click ‘Add’.
Should do it.
This is all caused by Apple not including AppleTalk support in Snow Leopard. The process could work for other printers.

Just keep in mind that if there is not a permanent address assigned to the printer, if the network resets itself for whatever reason, there may be a new address assigned to it, and you will have to go through this process again. You should be able to configure a permanent address for the printer to avoid that problem. Check with the documents for the printer or the print server. You can also reserve addresses through your router so that address will not be assigned to another device.

My Epson XP - 400 will not print wirelessly or via USB. The documents just sits in the print queue while the computer is "searching for the printer". I set up the printer on the computer and it is connected to the wireless network.

I'm unable to print wirelessly or connected via USB with my Epson XP-400. The computer continues to say it's searching for the printer even though the printer is set up on the computer, the printer is connected to the wireless network and the USB is plugged into the computer.

Try resetting your Mac's printing system as shown here:
http://support.apple.com/kb/PH14141

Network sizing for SAP printing

Similar Messages

Maybe you are looking for