Network status

I am having trouble connecting to the internet using ethernet cables. I have an Imac G5 running 10.4.2 and a G3 running 10.3.7. I ran some ethernet cable to both of them from a linskys switch but can only connect using airport. When I check network status the "built-in ethernet" does not even show up. I tried contacting my ISP but they were no help. I have SBC Yahoo with a HomePortal 1000 router hooked up to the linskys switch. Any suggestions?

Craig, welcome, Just a thought, You might try this.
First shut your computers clear off.
pull the plug on your power adapter from both your Modem from SBC and your switch.
Next wait a few minutes, like 5 or more and then .
Plug your 1000 back in and wait until it reaquires all the lights should be 3.
next plug back in your switch and do the same, wait on the lights..
Finally, turn your computers back on and you should be good to go.
That is if your Network settings are correct on both and the Sharing option has all the correct settings. Sharing is in System Preferences.
Hope this helps...Oh one other thing Ethernet cables if you have any others change them, it could also be a bad cable...Cheers...Don

Similar Messages

How to show network status in top toolbar?

how to show network status in top toolbar? Network preferences is there, but network status has disappeared on last reset of Airport Express, but may not be connected. Thanks in advance for practical help

Interestingly, in my experience, using the method described above of unchecking the "Show Connected Servers" box in the Finder Preferences makes no difference in what I can put in the sidebar. I was able to move a sub-folder of a shared disk to the Favorites section of the Finder Sidebar, but nothing else. (i.e. I could not add the shard disk itself to the sidebar – either to the devices, favorites, or any other section, and I could only add a subfolder of the shared disk to the favorites section – not to the devices section or any other section). This was the same whether I had "Show Connected Servers" checked or not.
I'm running OS X Mavericks, and the setup I have is with a previous generation Time Capsule (i.e. the short, square kind that you could buy before the most recent taller variety came out last year), with a LaCie 3 TB USB 3.0 external drive plugged into the USB port of the Time Capsule. I'm then accessing this network drive over WiFi. The differences in what I'm seeing may be due to some change they made in the way Mavericks handles these setups.
I could also just be misunderstanding what you're saying, but I thought I'd add this in case anyone else gets similar results so that they'd know they're not alone. Let me know if I'm missing something here.

Airport Network status says Internet failed and I can not connect wirelessly. Ethernet connection works fine. Why can't I connect?

A few days ago, my Airport Express wireless connection stopped working. The network status lights for Internet and Servers are RED and indicate failure. My Ethernet connection works fine. Any idea what my problem is?
Thanks,
LivingSuccess

You could try a Safe Boot - restart holding down the shift key until the grey progress bar appears. When it's booted restart as normal from the Apple menu.
If that doesn't help you could try an SMC reset:
SMC Reset
Shut down the computer.
Unplug the computer’s power cord and disconnect peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.

Solaris 10 network status shows 'disconnected' & cannot ping out

Hi,
In my solaris 10 sparc t4-1 server, the network status shows 'disconnected'
I cannot ping to any servers in the lan.
Please help
thanks

Sounds like it's either infrastructure or faulty hardware. Are you sure the port is turned on that you are plugging into?

In Failover Cluster 2008 mailbox2 server network status Unavailable (down).

Hi
I am new here, & hope i can get some help for the below issue
let me keep it simple scenario
i have 2 mailbox server ( mbx01 & mbx02)
2 cashub Server ( cshb1-cshb2) all running on hyper-v. last week due to some maintenance in data center i have to bring down all the production environment, once the thing are fixed in DC , i started all the server and found out that my exchange node 2 database
are failed.
In exchange 2010 failover cluster node ( node2 ) is down network status unavailable. due to by exchange node2 database are failed.
also i cannot access the file share witness directory from any of the above server.
can any body assist me on this please
thank you

Make sure both the DAG members have access to the witness directory. Check the location and make sure you have access. Open the DAG properties from Node2 and try to update the witness server and witness directory. Check the firewall/antivirus of the witness
server. Try disabling antivirus and firewall. If witness server is not online your databases will go offline. Pleae check
this
Get-DatabaseAvailabilityGroup -Identity DAG -Status | fl name,servers,witnessserver,witnessdirectory,alternatewitnessserver,alternatewitnessdirectory,operationalservers,primaryactivemanager,witnessshareinuse
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Unable to connect to internet although network status is ok

Dear all,
Since Monday (9 January 2005) I have been unable to access the internet using my usual web browsers (Safari, Internet Explorer and Firefox) and e-mail program (Mail) via Airport. This was despite Airport being active and the network status indicating that I was connected to the internet via Airport (green status). When plugging the iBook directly into my router, the network status naturally changed to being connected to the internet via Built-in Ethernet (I defined this order in the network port configurations). I was able to access the internet normally using my web browsers and e-mail program via Built-in Ethernet until this morning. Although the status of both Airport and Built-in Ethernet is still the same, my web browsers indicate that they can't find the respective servers.
Your help would be very much appreciated.
Best regards,
Semilev
iBook G4 14-inch Mac OS X (10.3.9) Airport Extreme Card 640 MB DDR SDRAM

I have exactly the same problem. Internet provider (Time Warner) repaired a cable, installed a new splitter and a new modem. It worked for a day, then same problem. TWC tech verified cable, modem and router OK, problem in the computer. My work around is to disconnect the ethernet from the computer and operate it soley on WiFi. I hope to find out what is wrong with the iMac (running Lion), but for now it works fine this way.
I had even restoree the OS, did not help.
Go to the network preferences and make sure your network is selected, and it should work.
Message was edited by: DocRon78

ADF Mobile - Get network status

OS: OSX 10.8.5
JDEV: 11.1.2.4
ADF Mobile Extension version: 11.1.2.4.39.64.51
HI All,
I'm currently in the middle of developing an ADF Mobile application and exploring the offline/online capabilities and have run into an issue where i'm trying to determine if the user has network connectivity, but its not working properly. I'm trying to make the app as dynamic as possible such that, for every transaction that requires network access, the app will check beforehand whether it is "connected" or "disconnected". I've tried the following but not quite got there..
1) From the link below, Joe does make note that the EL Expression "#{deviceScope.hardware.networkStatus}" to resolve the network status is only evaluated at start up, which is good for when the app opens.. but not good when the user loses network connectivity.
Re: JDeveloper ADF Mobile -- Android Context
2) The link below uses javascript to evaluate the network connectivity. This works first time and every subsequent time afterwards, however, I would like the javascript to ONLY evaluate the network status and then populate a pageFlowScope variable with true or false. This bit also works fine. From here, it may seem that the pageFlowScope variable has been populated, but if the java method (which calls the javascript function to check the network connectivity) also includes code that reference the pageFlowScope variable that the javascript has just populated, it is not evaluated properly.
Example:
    public void checkConnection(ActionEvent actionEvent) {
        // This works fine and populates the PageFlowScope variable fine
        AdfmfContainerUtilities.invokeContainerJavaScriptFunction("feature1", "application.checkConnection",
                                                                          new Object[] { });
        // The two lines below do not work properly, as if its retained the old value of the pageFlowScope.
        ValueExpression ve = AdfmfJavaUtilities.getValueExpression("#{pageFlowScope.isConnected}", String.class);
        throw new AdfException("isConnected: " + (String)ve.getValue(AdfmfJavaUtilities.getAdfELContext()), AdfException.INFO);
Unwinding ADF: Offline Data Synchronization for ADF Mobile
Below is a link to a sample app that i made and the steps to reproduce:
https://app.box.com/s/ng5n362unttu7b88i42b
- Have network connectivity
- Click on the "Check connection via JS' button the first time
- The popup in the foreground is the javascript showing the connectivity, which is correct
- The popup in the background is an INFO AdfExpection showing the connectivity, which is INCORRECT
- Click OK twice
- Click on the "Check connection via JS' button the second time
- The popup in the foreground is the javascript showing the connectivity, which is correct
- The popup in the background is an INFO AdfExpection showing the connectivity, which is CORRECT
- Click OK twice
- disconnect your computer from the network/internet
- Click on the "Check connection via JS' button the third time
- The popup in the foreground is the javascript showing the connectivity, which is correct
- The popup in the background is an INFO AdfExpection showing the connectivity, which is INCORRECT
Has anyone has similar use case has have a work around/solution? This is driving me nuts!
Cheers,
Eddie

Hi Frank,
Thanks for the quick reply.
That's exactly what i've used in my javascript function in my demo app and that link is the resource i used as well, however, that javascript code does populate the pageFlowScope variable fine, however, if i make reference to that pageFlowScope variable from within the same java method that includes the call to the javascript function, it does not get the updated pageFlowScope value. Only after the transaction has fully completed and i then [for example] click on a button on the screen to evaluate the pageFlowScope variable again, do i get the updated value.
Having a stab in the dark, could it be something to do with the way the javascript is executed when updating the pageFlowScope variable and lifecycle of that transaction
I've also tried this under the code where it populates the pageFlowScope, but it can't resolve the expression, seems like i'm doing something wrong..
navigator.notification.alert('pageFlowScope value: ' + adf.mf.el.getValue("#{pageFlowScope.isConnected}", onSuccess, onFail), alertDismissed, 'Connected', 'OK');

Network Status Page

Has EE have a network status page like most of the other networks, all i can find is http://downdetector.co.uk/problems/ee-everything-everywhere which tell's me how bad EE is, I'd have to agree.I've tried most networks this has to be the worst.Luckly i'd only bought a 90 day internet sim but 5 days with it still yet to view a webpage well except my add-on page after about 40 refresh's and about 30min's.At least i know when my contract run's out next month EE is one to avoid.

Adding to my previous posting ... http://ee.co.uk/content/dam/everything-everywhere/documents/Our%20Company%20responsibility/EE%20Responsibility%20Report%202013.pdfmakes interesting reading and promises on Page 14 that in 2014 there is planned "Launch of online ‘real-time’ network status
tool that allows customers to see if there’s a
temporary network fault or planned disruption
in their area, and the status of the issue"
Presumably (?) it is in testing now, so that it can go live in 2014. Certainly EE's MVNOs must know about it, so how about an update here?

Everything under network status failed

My wifi isnt turning on even though i do it manually so i cant even go into my safari,mail,or anything also when i go to network diagnostics everything under the network status are all red/failed and it doesnt even show on the startup page and tool bar which idk why be because this never happened before this on ly happened from a couple days ago till now

I have a similar problem! I moved into a new appartment not so long ago. The internet is included in the rent, therefor I'm connection on my landlords network. When I first got here, I had problems with the internet which eventually got fixed by changing the modem.
2 weeks ago, my landlords upgraded the internet to a faster one and ever since, I have been loosing my connection every 20 minutes or so and since yesterday, my MacPro litterally refuses to connect. It shows a very weak signal coming from the usual network I use and when I try to connect, it keeps on sending me the message that the connection delay has expired.
Thing is, I also have an Hp laptop and I have 0 connection problem with it. I have been loving my Mac so far, but right now I can't help but be frustrated about it.
Anybody has talked to someone at Apple or has gotten their problem fixed?!
MacPro specs; 2 x 2,66 Ghz Dual Core Intel processor with a 2GB memory and it runs on Mac OS X 10.6.2. For internet connection; AirPort Extreme.

Trying to connect, but network status says "Ethernet cable not plugged in"

I've got a G5, and I'm using a DSL modem (with 1 ethernet port) and a perfectly functional ethernet cable that is plugged in. Yet I can't connect to the internet, and according to the network status, the ethernet cable is not plugged in. Any help is appreciated.

I've got a G5, and I'm using a DSL modem (with 1
ethernet port) and a perfectly functional ethernet
cable that is plugged in. Yet I can't connect to the
internet, and according to the network status, the
ethernet cable is not plugged in. Any help is
appreciated.
There are only three things which could be wrong.
1 the cable is bad or not properly connected. (most probable)
2 the DSL device (what kind of DSL device, btw?) is bad or has a bad port or is not properly connected.
3 the Mac has a bad ethernet port, a bad ethernet controller chip, or is not properly connected.
I'd verify that the cable has a good connection, first thing. The best way is to unplug it (at both ends) and then plug it back in.
If no joy, I'd go over to a friend's place with Mac, cable, and DSL device.
I'd plug the Mac into the friend's local net, using the friend's cable; if that works, the problem isn't on the Mac. If it doesn't, I'd take the Mac over to a repair shop or would get a wireless card (if not installed already) and a wireless router and connect wirelessly. Be advised that the ethernet port on an iMac is built into the motherboard, and replacing/repairing that port will require a motherboard swap and will be expensive if you're not still under warranty or AppleCare.
If the Mac works with the friend's cable, replace that cable with yours. If it stops working, your cable is bad. Replace it. If it keeps working, your DSL device is bad. Replace it.

Network Status Language

Hello all, when trying to retrieve the network status through BAPI BAPI_BUS2002_GET_STATUS, it retrieves the information always in English. I have seen in transaction CJ20N, that the status is language dependant.
How can I retrieve the status in different languages please?
Thanks in advance!

Hi
The system status langauge is determined thorugh table TJ02T.
CALL FUNCTION 'STATUS_NUMBER_CONVERSION'
EXPORTING
    LANGUAGE           = sy-langu
    STATUS_NUMBER      = lt_jest-stat
    STSMA              = l_stsma
I am not sure how to retrive status in different langauges. Better if you put this thread in ABAP forum.
Regards

Get network status (wicd/xmobar)

I need to get the network status in a script, something like the status row in the bottom of wicd-curses. Was planning to parse it a bit put it in my xmobarpanel.
It's basically "Not connected", "Connecting to <SSID>..." "Obtaining IP-address..." and "Connected to <network>" and so on. Is it an easy way to do this?
wicd-cli -dy (-d for network details and -y for wireless) doesn't give me enough information.
Tried reading the sources to wicd but my pythonskills is kind of non existant, so I would be very thankful if someone could me out here.
Last edited by faj (2011-06-22 13:29:27)

I can't hack a script for you, but check out the Wireless plugin made for xmobar. It can display the essid and quality of a wireless connection.

Network Status: Port Restricted???

So my ichat one day I started noticing that it was getting fuzzy, so I went to look under Network Status and found that next to Router Type: it says "Port Restricted" and i found out this could cause poor picture quality. How do i fix this I'm using a D-Link router if thats anything

Hi,
The Question mark at the top of Defcom's Pic will tell you more.
It is about the way your Routing device does NAT.
NAT (Network Address Translation) is not the same on every device. There is no standard as such.
iChat "prefers" Full Cone as it is called but I also have Port Restricted listed and have no problems
8:56 PM Wednesday; December 2, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Macbook Pro network status lights?

I am tring to find out if there are any network activity indicator lights where the network jack is? I see what looks like LED's and at the abpplestore they even looked like they were flashing...They are not even on with my Macbook so I was not sure if there is a way to activate or they are really not there?
Thanks

The MBP does not have network status lights. There is a utility available called MenuMeters that will put the information on the bar at the top of the screen.

TECO Network Status

Hi,
Can you please help, Iu2019m getting error message when Iu2019m trying to change my Network Status to TECO. A purchase requisition for $3600, 000 was created and 2778636.16 were converted to purchase order and the service entry was accepted, $1,353,423 is on remaining order plan in S_ALR_87013558 and is consuming my budget. Now Iu2019m getting an error message no: 06411 that says Sum of quantities > 2< larger than total quantity.
Regards
Sandile

Hi,
I set the final invoie indicator because it was a purchase order for service but still i can't TECO my NETWORK status
Regards
Sandile

Network status

Similar Messages

Maybe you are looking for