Network teaming/bonding - Team a wifi connection and an eth one ???
Hello,
Is it possible to team/bond a wifi network connection with a ethernet one to increase the overall connexion speed?
I believe that it can be done with 2 eth one, but not sure about a eth and a wifi one.
Thanks in advance.
Ludo
No reason you can't AFAIK depending on the bonding mode you want to use, but it wouldn't be desirable if your goal is speed.
Bonding does NOT aggregate the links per stream. Each stream still only goes over 1 "physical" connection to avoid packets getting out of order etc, so you would find that some connections would be sent over the wifi (and be limited by it's connection speed), while other connections would be on the wire connection.
Bonding allows more streams to happen in parallel, it doesn't magically speed up individual streams.
You would still be able to obtain redundancy using bonding (eg, mode 1)
Similar Messages
-
I uploaded 8.0.2, able to continue to use my IPad 3, use internet, WiFi connectivity OK. Then, about 1 1/2 hours later, I loose internet connection, and WiFi connectivity. I rebooted the IPad and attempted to rejoin my WiFi network...no go, message says my password is wrong!! I then, pursuant to a suggestion in the message boards, entered "Forget Network" and then attempted to again join my WiFi. Again, message says "password is wrong" Password is correct; I am on the internet on my desktop via my WiFi network!! Is the 8.0.2 "update" defective and/or compromised?? My partner, who has an IPad Air, also updated to 8.0.2 this afternoon and has had the same problem!!!
Actually, we up-loaded the new OS in the early evening! We now have WiFi connectivity, and this is how it was achieved: turned off the power to our WiFi modem, then turned it back on; wifi booted up; in IPad's Settings, WiFi: toggled the Wi-Fi button off, waited a short while and toggled it back on; choose our network and entered our passcode...IPad finally accepted the passcode. However, at the top left-hand portion of the screen, we now have a "No Service" statement, yet we are wifi connected and have internet service on our various apps!
-
I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.
wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
Running 10.6.8 on Intel dual core iMac, it keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Q since upgrade to iOS6 l have been having problem with wifi connection and getting into App Store and itunes
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W. -
My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?
Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS -
hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth
I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth, because when i click the wireless in settings there are no choices... but when i use the mac os, everything is fine, the wifi, the bluetooth everything is functional, can you help me fix this problem? help will be much appreaciated.. thanks
How did you install Windows? Did you use Bootcamp Assistant or did you use a virtual machine like Parallels, Fusion, or VirtualBox.
If you used Bootcamp Assistant, did you download and install the Windows Support software (drivers) in accordance with the Bootcamp instructions? -
After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.
May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them. -
I have a new device. When selecting the language and country I am trying to connect to a wifi connection and getting the error 'Your Iphone could not be activated because the activation server cannot be reached. Try connecting to your Iphone to iTunes to activate it, or try again in a few minutes.
Where exactly did you get this phone?
Do you have a SIM in the phone?
There are 2 primary causes for this.
Either you don't have a SIM in the phone, which is REQUIRED to activate it, or the phone was hacked to unlock it. -
Updated to 6.2.1 and now continuously losing wifi connection and iMessage/FaceTime trouble
I recently updated to 6.2.1 and now I constantly lose wifi connection and I am unable to FaceTime or iMessage the majority of the time... Anyone else experiencing this? Any suggestions?
My error yes 6.1.2... I don't believe I have ever backed it up... Lesson learned on that!, and as I tried to reply lost Internet connection yet again!
-
I have no signal where i live but a great wifi connection and i still cant activate my iphone 3gs what should i do anf i have tried that one troubleshooting article on this and nothing works
well i have tried restarting it and that didnt work i have connected it to itunes but it just tells me i dont have a sim card in the phone (which i do) and i have tried restoring it and that didnt do anything and my error message said "Your iPhone could not be activated because the activation server is temporarily unavalible"
-
imessage won't send or receive messages. I tried several different wifi connections and ethernet and still nothing. Maybe my outstanding balance is restricting my imessaging?
Welcome to Apple Communities
Open Finder, press Option key and select Go > Library. Open Preferences and delete com.apple.imessage.bag.plist and com.apple.imservice.iMessage.plist -
Did all the resets and still wifi connects and disconnects , plz help
did all the resets and still wifi connects and disconnects , plz help
I upgraded Apple TV late last week. Last weekend I rented a couple of movies from Apple TV. I watched one immediately, and was going to watch the other one the next day. On Sunday I opened up Apple TV to watch the film, and..... NOTHING THERE. I could see 'purchased movies', 'top movies', etc., at the top of the bar, but no mention of rentals. Even the film I'd watched (which obviously you can see for 48 hours) had disappeared into a black hole in Apple TV. I have been charged for these movie, and sent in a complaint.
My airplay seemed to be fine, but.... last night, my computer was not seeing an Apple TV or showing an airplay sing, so I restarted and the Apple TV and airplay sign returned. If I chose to watch the film on the computer it started up immediately, if I chose airplay, I got the first image of the film and the loading sign going on and on (round and round) forever. The film never started. I restarted my Apple TV, the same. I restarted the computer, the same. I tried with various programmes and no go.
iMore has the following suggestion. I am not sure if this will help. It sounds a PIA, but if I can't get airplay to work, I might try it: http://www.imore.com/how-restore-2nd-or-3rd-generation-apple-tv-back-factory-set tings-itunes
Maybe you are looking for
-
Can I upgrade the chip and memory? if so what can I use. The system is a little too slow. Yes I have all the software to speed it up. Thanks HP 2000 Notebook PC Windows 8.1 64-bit [Edited for Personal Information] AMD E-300 APU with Radeon(tm) HD Gra
-
Doubts : SLD in Production System.
I have 2 SLD's in my Landscape. 1. SLD on solution Manager : DEV-SLD and QAS-SLD ( Both SLD on Same solution Manger as Cenetrlise SLD Option). 2. SLD on Production PI System( Local SLD ) : This SLD we are using in term of Production PI System. Quest
-
Error VF 047 & 048 while creating Inter company billing
Hi, Getting an error VF047 // Bill to party can not be determined VF048 // Payer can not be determined while cteating billing (IV) after PGI of delivery (NLCC) from inter company Stock transport order. Found a note 860311 relevant , but do not get cl
-
"put dependent files" file name in dialog
<good> When I'm doing a Save All, and I get the dialog asking to put dependent files... this dialog pops up for each of the files to be saved. </good> But, I don't see anywhere on it the name of which file I'm trying to put in this instance. (It di
-
hi everyone, For custom field creation and linking the existing system fields with my custom fields i like to know about User Exit and screen Exit. Kindly give me the suggestion. Thanks & Regards R.Vijai