Network time is 40-seconds off!

This is a mind-boggler! I have two Macs side-by-side, a Power Mac G4 and a G4 iBook. Both are connected (wirelessly) to my Airport Extreme Base station which is about eight feet away. The iBook displays time that is about forty seonds ahead of my G4 Power Mac and an "Atomic" Digital Clock that is mounted on the wall above the Power Mac. For a long time I thought the iBook was not receiving the Apple Time Server signal even though I have that port opened in the Firewall. A short while ago I read in the Discussion Group about intentionally setting the Date/Time incorrectly with the Time Server disabled and then enabling it. I quickly tried that and to my amazement and chagrin found the the date/time was corrected but the time displayed was once again 40 seconds ahead of both the Power Mac and wall clock.
Any thoughts? Not a show-stopper, but surely a mystery.
Dual Processer 1.25 GHz G4 MDD   Mac OS X (10.4.3)   1.25 GB RAM, AirPort Extreme & DSL

Hi KenW.
I'm a little perfectionist and also care about such dirty little things as you have one there. Can it be possible that the Apple Time Servers are not as accurate as they should be? Why not try another, just to be sure?
According to BIPM (Bureau International des Poids et Mesures) the NIST (National Institute of Standards and Technology) is responsible for the time in the USA. NIST has some alternative network time servers available for you to use.
-nico
PowerMac G5   Mac OS X (10.4.3)  

Similar Messages

  • My dad gave me an iPhone 3G to use as an ipod touch but it's not picking up wifi. ive tried everything to like resetting the network settings turning wi fi off and on mutable times, turned the phone off on and on. What do i do?

    My dad gave me an iPhone 3G to use as an ipod touch but it's not picking up wifi. ive tried everything to like reseting the network settings turning wi fi off and on mutable times, turned the phone off on and on. What do i do?
    the iphone never really picked up wi fi when it was used as a phone and it didnt really matter because he had unlimited internet but it still wont go on wi fi. does any one know why it is doing this?
    The iphone works fine other wise i just really want it to go on wi fi. We just got new wi fi too and all of our other apple products go on the wi fi just fine. I dont know if its because its newer or what but my brothers 1st gen ipod goes on wi fi just fine.
    The iphone is updated to the latest ios too
    WHAT SHOULD I DO!!!!!!!!!!!???????

    This might help
    http://support.apple.com/kb/ht3406

  • After updating my iPad 2 to iOS 6, I cannot connect to my router.  I have turned the router off, left off for a considerable time, turned the iPad off and on, reset the network settings, nothing works.  Any other suggestions?

    After updating my iPad 2 to iOS 6, I cannot connect to my router.  I have turned the router off, left off for a considerable time, turned the iPad off and on, reset the network settings, nothing works.  Any other suggestions?  It is obvious many others are having similar problems, so the iOS 6 looks like a loser.

    I have just upgraded from a 3 to a 4S and now I can't connect to my wifi. I've tried everything, resetting network settings, switching to boot, renewing lease, rebooting, turning off cellular data etc etc. nothing works!! Very frustrating!

  • TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

    Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
    Thankyou in advance  for your help.
    Terrence

    Hey terremo,
    Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Thanks,
    Matt M.

  • My mac and iPhone 6  has been hacked! foresure! Antivirus sentinel pro from apple store detected apr or arp spoofing, thereafter Antivirus protection also got hacked, I turn network monitoring on they turn off like 3 times then they close Antivirus

    my mac and iPhone 6  has been hacked! foresure! Antivirus sentinel pro from apple store detected apr or arp spoofing, thereafter Antivirus protection also got hacked, I turn network monitoring on they turn off everytime then they close Antivirus for good, also Google.com is being imitated and not showing a true certificate (apr spoofing)?.these guys r good! I erased and reinstall Yosemite changed all passwords even on the wifi...could be wifi sniffing? I got Kaspersky hoping to use virtual keyboard for passwords and Kaspersky is comprised too..the virtual keyboard doesn't work it freezes up not allowing me to enter password. So I Uninstall and reinstall Kaspersky, so now I have problem with reinstall that doesn't work, then way later that day it is reinstalled..not over yet..that virtual keyboard now pops up randomly wanting me to use password? seems like they can copy anything real fast for i have to enter info like 2 or 3 times, never had that problem before. I'm thinking about going old school with paper docs and checks..yes technology ***...too vulnerable. .on the news they said 97% of businesses are hacked! can someone help me to counter this attack? thx
    Message was edited by: technologysux

    You have not been hacked. Get rid of all that antivirus. It is just making your life harder.

  • I have turned firewall off but my iphone will still not update. it still says 'network time out' i am using a dell laptop

    i have turned firewall off but my iphone will still not update. it still says 'network time out' i am using a dell laptop and i want to update my iphone4 to iOS 5.

    Things in this thread might be helpful too.
    https://discussions.apple.com/thread/3382814?start=0&tstart=0

  • HT1212 Every time i try to turn on my Ipad the only i can see the the date and time for a second and them the screem goes off again !

    I have an Ipad 2 /. Everytime a push the bottom to turn it in the screem shows the time for a second and the screem goes black again
    what can I do ??

    Are you sure it's charged?
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Mac's requesting net time every 30 seconds

    We are having an issue with every Mac trying to update it's time every 30 seconds (we can see the network traffic). Is there any way to set this to once a day, or turn it off completely?
    Thanks.

    Go to the Date & Time preference pane, and unclick "Set date & Time automatically" to disable the behavior.
    Unless it's failing to see its time server and trying multiple sites, it should just be issuing normal NTP traffic.

  • Time Capsule Wifi Turns off

    I have noticed the last two weeks that when I get up that my wifi from my time capsule is off. I have to restart it by unplugging it. After I do that they are working just fine.
    Any suggestions?

    Restarted it 2 times today. Here is the log file I pulled from the last restart
    Apr 28 20:59:16
    Severity:5
    Initialized (firmware 7.6.3).
    Apr 28 20:59:26
    Severity:5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
    Apr 28 20:59:26
    Severity:5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
    Apr 28 20:59:26
    Severity:5
    Rotated TKIP group key.
    Apr 28 20:59:27
    Severity:5
    Binding added for udp, 0.0.0.0:32770 to 10.0.1.3:4500 with lifetime 7200
    Apr 28 20:59:27
    Severity:5
    Binding added for udp, 0.0.0.0:32769 to 10.0.1.3:5353 with lifetime 7200
    Apr 28 20:59:27
    Severity:5
    Disk sd2 (WD My Book 1140 1003) plugged in.
    Apr 28 20:59:28
    Severity:5
    Binding added for udp, 192.168.1.90:32770 to 10.0.1.3:4500 with lifetime 7200
    Apr 28 20:59:28
    Severity:5
    Binding added for udp, 192.168.1.90:32769 to 10.0.1.3:5353 with lifetime 7200
    Apr 28 20:59:28
    Severity:5
    Internet configuration leased [IPv4] -- host <192.168.1.90/255.255.255.0> gateway <192.168.1.254> dns <192.168.1.254> wins <> lease <86400> domain <gateway.2wire.net>
    Apr 28 20:59:28
    Severity:5
    Disk sd3 (WD My Book 1110 1030) plugged in.
    Apr 28 20:59:28
    Severity:5
    Disk sd4 (Initio INIC-1610P 2.02) plugged in.
    Apr 28 20:59:30
    Severity:5
    Connection accepted from [::ffff:10.0.1.3]:49250.
    Apr 28 20:59:30
    Severity:5
    Binding added for udp, 192.168.1.90:32770 to 10.0.1.3:4500 with lifetime 7200
    Apr 28 20:59:30
    Severity:5
    Binding added for udp, 192.168.1.90:32769 to 10.0.1.3:5353 with lifetime 7200
    Apr 28 20:59:30
    Severity:5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
    Apr 28 20:59:30
    Severity:5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
    Apr 28 20:59:30
    Severity:5
    Rotated TKIP group key.
    Apr 28 20:59:32
    Severity:5
    Associated with station 00:1f:5b:c8:ed:f7
    Apr 28 20:59:32
    Severity:5
    Installed unicast CCMP key for supplicant 00:1f:5b:c8:ed:f7
    Apr 28 20:59:33
    Severity:5
    Binding added for udp, 192.168.1.90:32827 to 10.0.1.10:4500 with lifetime 7200
    Apr 28 20:59:33
    Severity:5
    Binding added for udp, 192.168.1.90:32828 to 10.0.1.10:5353 with lifetime 7200
    Apr 28 20:59:34
    Severity:5
    (WAN) link state is Up.
    Apr 28 20:59:34
    Severity:5
    Binding added for udp, 0.0.0.0:32827 to 10.0.1.10:4500 with lifetime 7200
    Apr 28 20:59:34
    Severity:5
    Binding added for udp, 0.0.0.0:32828 to 10.0.1.10:5353 with lifetime 7200
    Apr 28 20:59:34
    Severity:5
    Binding added for udp, 192.168.1.90:32827 to 10.0.1.10:4500 with lifetime 7200
    Apr 28 20:59:34
    Severity:5
    Binding added for udp, 192.168.1.90:32828 to 10.0.1.10:5353 with lifetime 7200
    Apr 28 20:59:34
    Severity:5
    Internet configuration leased [IPv4] -- host <192.168.1.90/255.255.255.0> gateway <192.168.1.254> dns <192.168.1.254> wins <> lease <86400> domain <gateway.2wire.net>
    Apr 28 20:59:35
    Severity:5
    Binding added for udp, 192.168.1.90:32770 to 10.0.1.3:4500 with lifetime 7200
    Apr 28 20:59:35
    Severity:5
    Binding added for udp, 192.168.1.90:32769 to 10.0.1.3:5353 with lifetime 7200
    Apr 28 20:59:38
    Severity:5
    Associated with station 00:1e:c2:bf:5e:04
    Apr 28 20:59:38
    Severity:5
    Installed unicast CCMP key for supplicant 00:1e:c2:bf:5e:04
    Apr 28 20:59:40
    Severity:5
    Associated with station 44:4c:0c:b7:7c:8e
    Apr 28 20:59:40
    Severity:5
    Installed unicast CCMP key for supplicant 44:4c:0c:b7:7c:8e
    Apr 28 20:59:40
    Severity:5
    Associated with station 58:55:ca:4c:44:e1
    Apr 28 20:59:40
    Severity:5
    Installed unicast CCMP key for supplicant 58:55:ca:4c:44:e1
    Apr 28 20:59:42
    Severity:5
    Connection accepted from [fe80::21f:5bff:feec:6fdc%bridge0]:49294.
    Apr 28 20:59:42
    Severity:5
    Connection accepted from [fe80::21f:5bff:feec:6fdc%bridge0]:49295.
    Apr 28 20:59:42
    Severity:5
    Connection accepted from [fe80::21f:5bff:feec:6fdc%bridge0]:49296.
    Apr 28 20:59:47
    Severity:5
    Clock synchronized to network time server time.apple.com (adjusted +4 seconds).
    Apr 28 20:59:48
    Severity:5
    Associated with station 28:e7:cf:5f:5e:24
    Apr 28 20:59:48
    Severity:5
    Installed unicast CCMP key for supplicant 28:e7:cf:5f:5e:24
    Apr 28 20:59:56
    Severity:5
    Associated with station fc:25:3f:cc:4a:f8
    Apr 28 20:59:56
    Severity:5
    Installed unicast CCMP key for supplicant fc:25:3f:cc:4a:f8
    Apr 28 21:00:10
    Severity:5
    Associated with station 14:10:9f:ea:d3:74
    Apr 28 21:00:10
    Severity:5
    Installed unicast CCMP key for supplicant 14:10:9f:ea:d3:74
    Apr 28 21:00:16
    Severity:5
    Binding added for udp, 192.168.1.90:32771 to 172.16.42.2:4500 with lifetime 7200
    Apr 28 21:00:16
    Severity:5
    Binding added for udp, 192.168.1.90:32772 to 172.16.42.2:5353 with lifetime 7200
    Apr 28 21:00:27
    Severity:5
    AFP login OK from Len [email protected].
    Apr 28 21:01:36
    Severity:5
    Connection accepted from [fe80::21f:5bff:feec:6fdc%bridge0]:49357.
    Apr 28 21:01:36
    Severity:5
    Connection accepted from [fe80::21f:5bff:feec:6fdc%bridge0]:49358.
    Apr 28 21:01:36
    Severity:5
    Connection accepted from [fe80::21f:5bff:feec:6fdc%bridge0]:49359.
    Apr 28 21:01:45
    Severity:5
    Connection accepted from [fe80::21f:5bff:feec:6fdc%bridge0]:49360.
    Apr 28 21:01:45
    Severity:5
    Connection accepted from [fe80::21f:5bff:feec:6fdc%bridge0]:49361.
    Apr 28 21:01:45
    Severity:5
    Connection accepted from [fe80::21f:5bff:feec:6fdc%bridge0]:49362.
    Apr 28 21:02:03
    Severity:5
    Associated with station 44:4c:0c:b6:60:09
    Apr 28 21:02:03
    Severity:5
    Installed unicast CCMP key for supplicant 44:4c:0c:b6:60:09
    Apr 28 21:02:34
    Severity:5
    Disassociated with station 44:4c:0c:b6:60:09
    Apr 28 21:02:35
    Severity:5
    Rotated TKIP group key.
    Apr 28 21:10:06
    Severity:5
    AFP session from Len [email protected] closing.
    Apr 28 21:11:48
    Severity:5
    Associated with station 44:4c:0c:b6:60:09
    Apr 28 21:11:48
    Severity:5
    Installed unicast CCMP key for supplicant 44:4c:0c:b6:60:09
    Apr 28 21:12:33
    Severity:5
    Disassociated with station 44:4c:0c:b6:60:09
    Apr 28 21:12:34
    Severity:5
    Rotated TKIP group key.
    Apr 28 21:17:04
    Severity:5
    Binding added for tcp, 192.168.1.90:18359 to 10.0.1.3:18359 with lifetime 3600
    Apr 28 21:17:04
    Severity:5
    Binding added for udp, 192.168.1.90:18359 to 10.0.1.3:18359 with lifetime 3600
    Apr 28 21:18:32
    Severity:5
    Binding added for tcp, 192.168.1.90:43611 to 10.0.1.10:43611 with lifetime 3600
    Apr 28 21:18:32
    Severity:5
    Binding added for udp, 192.168.1.90:43611 to 10.0.1.10:43611 with lifetime 3600
    Apr 28 21:21:28
    Severity:5
    Associated with station 44:4c:0c:b6:60:09
    Apr 28 21:21:28
    Severity:5
    Installed unicast CCMP key for supplicant 44:4c:0c:b6:60:09
    Apr 28 21:22:04
    Severity:5
    Disassociated with station 44:4c:0c:b6:60:09
    Apr 28 21:22:04
    Severity:5
    Rotated TKIP group key.
    Apr 28 21:23:53
    Severity:5
    Associated with station 44:4c:0c:b6:60:09
    Apr 28 21:23:53
    Severity:5
    Installed unicast CCMP key for supplicant 44:4c:0c:b6:60:09
    Apr 28 21:24:29
    Severity:5
    Disassociated with station 44:4c:0c:b6:60:09
    Apr 28 21:24:29
    Severity:5
    Rotated TKIP group key.
    Apr 28 21:26:15
    Severity:5
    Connection accepted from [fe80::21f:5bff:feec:6fdc%bridge0]:49551.
    Apr 28 21:26:17
    Severity:5
    Connection accepted from [fe80::21f:5bff:feec:6fdc%bridge0]:49554.
    Apr 28 21:26:18
    Severity:5
    Associated with station d8:6b:f7:24:3c:0b
    Apr 28 21:26:18
    Severity:5
    Installed unicast CCMP key for supplicant d8:6b:f7:24:3c:0b
    Apr 28 21:26:29
    Severity:5
    Disassociated with station d8:6b:f7:24:3c:0b
    Apr 28 21:26:30
    Severity:5
    Rotated TKIP group key.
    Apr 28 21:27:54
    Severity:5
    AFP login OK from Len [email protected].
    Apr 28 21:31:08
    Severity:5
    Associated with station 44:4c:0c:b6:60:09
    Apr 28 21:31:08
    Severity:5
    Installed unicast CCMP key for supplicant 44:4c:0c:b6:60:09
    Apr 28 21:31:49
    Severity:5
    Disassociated with station 44:4c:0c:b6:60:09
    Apr 28 21:31:49
    Severity:5
    Rotated TKIP group key.
    Apr 28 21:32:23
    Severity:5
    Connection accepted from [fe80::21f:5bff:feec:6fdc%bridge0]:49639.
    Apr 28 21:32:24
    Severity:5
    Connection accepted from [fe80::21f:5bff:feec:6fdc%bridge0]:49642.
    Apr 28 21:32:24
    Severity:5
    Connection accepted from [fe80::21f:5bff:feec:6fdc%bridge0]:49643.

  • HT201263 When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds.  While in auto-lock it is using battery power and will do so until the battery is drained.  Whats wrong

    When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds.  While in auto-lock it is using battery power and will do so until the battery is drained.  Whats wrong?

    - Try a reset. Nothing is lost:
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
    - If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
    - If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.

  • Time stamp dropping seconds

    I figure someone has had this problem before but didn't see it in the forum anywhere.  I'm adding a time stamp to a file so I've used the "Get Time/Date in Seconds" and wired that to a "Convert to DBL".  This then wires both into an indicator on the Front Panel and into the "Write to Measurement File" Express VI.
    The indicator displays the time stamp just fine but in the file it puts it into scientific notation and cuts off the last 4 digits as well as any fractional seconds.  The time stamp writes to the file every 5 seconds so it is important to have the rest of the time stamp included.  I've tried using probes on the wires to see where things go weird but I get the same truncated value in the wire before and after the indicator.  I thought it had something to do with the Express VI first since the indicator is fine but with it truncated in the wire it seems that the Express VI is indeed saving exactly what is handed to it...but then again the indicator...you can see I've been running in circles over this!  Does anybody know the reason it is doing this and a possible solution?
    Thanks a lot!
    Solved!
    Go to Solution.

    I can't post the exact code because it is being developed for use outside our lab but I've recreated the basics of the problem.  The array would be the collected data and except some filename details and things like that everything relevant to the time and saving is included.  Also settings in the express VI are the same.  Not sure if it will help out.
    Attachments:
    example.vi ‏56 KB

  • Apple TV is asking me to set network time. how to do this?

    Apple TV is asking to set network time. How is this done?

    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Apple TV 2 is asking for network time before I can purchase a movie? Restarted it and still requesting network time. Wifi is connected and works. Any ideas?

    Apple TV 2 is asking for network time before I can purchase a movie? Even restarted it and still did the same thing.
    How do you fix this? My wifi is operating 100% connected and I can access the Itunes Movies etc. How do I get it to work again?

    Welcome to the Apple Community.
    If you've had it working previously, try restarting the Apple TV by removing ALL the cables for a 30 seconds, or a restore if the problem persists.

  • HT4367 APPLE TV3 Network Time missing

    Please, First time I've got my Apple TV and it's being working fine since March 2012 when iI bought it....until now cause like many of you when downloaded Software 5.1 now can not set Network Time, adjust, etc. How long last the warranty ??? thanks.

    Here's what finally worked for me with Apple TV 3rd generation. Out of the box, when setup with wi-fi, it breezed through without any issue. As soon as I powered down and connected it to another tv (same wi-fi network), it got stuck at setting date/time. The remote would help in getting out of it, but the home would only have "Computers" and "Settings" and pretty much useless except for AirPlay. Here's what I did to resolve this:
    1. On your main router, temporarily disable the firewall or set it to the lowest setting allowable (a reboot of the router maybe required).
    2. Restart apple tv via the "restart" option in the "General" option in the main settings menu.
    3. It should breeze through and not show the "Setting date/time" screen.
    4. Once it loads up properly, turn on your fire wall as before  (a reboot of the router maybe required).
    I think it worked for me out of the box, but auto-update to the latest software introduced this bug. So, everytime apple tv tries to synch with the time server, this issue will come back. To disable this, I turned off the "auto time synch" option in Settings -> General.
    I am fairly confident that I'd be able to use steps 1 through 4 anytime this recurs. Possible scenarios causing recurrence of this issue:
    1. Unplugging the power to apple tv or power failures.
    2. OS updates.
    3. Restoring apple tv using "Restore" or via micro-usb and iTunes to the lastest OS.
    Hope this helps. Please post if this works for you.

  • I need to get the system time in Micro second

    Hi,
    In the java API there is a static method �curentTimeMillis�, but I need
    to get the system time in Micro second there is a equivalent method? Or
    there exists any suggested solution?
    Thanks
    Dany

    Why do you need such accurate timing ?
    I'd be suprised if anyone seriously relies on millisecond timing in
    Java, never mind calling through to JNI to get microsecond timing.
    If that's even possible in native code.
    The garbage collector can cause delays/pauses in a java program and
    throw timings off by at least 500 milliseconds, probably more under big loads.
    If you just want a more accuruate way to reset a random seed, there's probably other ways...
    regards,
    Owen

Maybe you are looking for

  • HTML Formatted Links in Dynamic TextField Trigger Popup Blocker

    I recently updated the flash on my site to load all text content as HTML from an XML file and display it in a couple of dynamic text fields. Everything works as expected except that links in the HTML text with a "_blank" target trigger popup blocking

  • Copying Files in Java

    How can I code in Java the copying of a file from one directory to another. I am trying to copy a Database from one folder to another and I do not want to use streams because this will read in characters or bytes but the Database is made up of tables

  • PrintJob image bug (black borders?)

    I've got a problem with the printJob in flash everything worked out great till some genius updated the IE to 7.0 suddenly the images which I printed have got a great big black border around it. does anybody have a solutions for this ugly bug? thanks

  • JDBC 2 thin drivers

    Hi. On Jun 08 I3ve asked you about JDBC 2 thin drivers for Oracle. I3ve been told that by the end of the month (June, I understod) the 8.1.6 thin driver would be released. I3m already using Oracle 8.1.5. What I want to know is: 1) When will actually

  • My SSD probably died, but any help is appreciated just in case

    I have an Asus Zenbook with a "hybrid" drive, that is, it has a 24GB SSD and a 500GB HDD. The HDD holds the UEFI-part, /boot, swap and /home while the SSD is /. Today, I started to get strange "Input/Output error"-messages for any command that wasn't