Network transfer/copy not working 10.8.5

I have 2 macpro computers connected via ethernet cable. I have screen sharing and file sharing enabled in SysPrefs. Both computers can see each other, I can share screens, I can drag and drop files - however this is where the problem is. Files do not complete the copy process between the computers. A file will get about halfway through the copy process and then the copy will fail. This happens in either direction on both machines. The whole point of this networking setup is to share files and this is the one thing not working properly.
Can anyone suggest what might solve this?
System:
OS X Mt Lion 10.8.5

Please describle your network setup. Are you connecting the 2 computers via patch cable directly, going through a router or switch, or connecting wirelessly? Also, are both computers running OSX, or are you sharing between OSX and Windows?
Please be detailed in your response.

Similar Messages

Is there any official market or store or anything in Egypt to fix my iphone 4 it jumped from 5th floor and the back hous was crashed and the network sensor was not working good but the phone and the screen and the others things are ok so plz help ???

Is there any official market or store or anything in Egypt to fix my iphone 4 it jumped from 5th floor and the back hous was crashed and the network sensor was not working good but the phone and the screen and the others things are ok so plz help ???
my iphone is now just coverd with case and the back house is crased

Etisalat, Mobinil and Vodafone provide warranty service in your country. You can also search Google for a 3rd party repair shop near you.

I am using iPhone 4s with no sim card. My WiFi turned grey and isn't working. I've tried many methods like freezing and Resetting the network settings, still not working. Now what should I do? (iOS 7.1.2)

I am using iPhone 4s with no sim card. My WiFi turned grey and isn't working. I've tried many methods like freezing and Resetting the network settings, still not working. Now what should I do? (iOS 7.1.2)

Put in a micro SIM (SIM need not be active) and
Restore from backup
Restore as new
http://support.apple.com/en-us/HT201252

VZ Contact Transfer will not work on Wi-Fi; Synch with iTunes sets up mail

VZ Contact Transfer goes into a loop with Verizon iPhone connected to your Wi-Fi and does not work.
Your wi-fi network will come up right after registering VZ iPhone. You could wait until later to allow it to connect.
Otherwise, disconnect router to force iPhone onto Verizon 3G network and proceed. If you click the change phone number button, it will get you a new access code to your old Verizon contacts from Verizon back up. (Back up before signing up on iPhone)
Took me hours of fooling around to learn this on another bulletin board.
Also after hours of fooling around to set up mail, synched iPhone thru iTunes to mail, calendar, etc and the email accounts set themselves up.
Hope this saves you some time
Enjoy!

I don't have an answer for you but from my experience iOS WiFi syncing has always been a hit and miss affair (more miss than hit I'm afraid). I have gotten to the stage where I rarely use the WiFi sync. It is just quicker, easier and much less stressful to use the USB cable. I am having the same issues with all the iOS devices in our family which includes various models of iPhone, iPad and an iPod Touch and have been having them since WiFi syncing was introduced (in iOS5 ???). And then I have not even mentioned my favorite iTunes syncing messages: "Waiting for items to copy" and "Waiting for changes to be applied"!
iTunes is always extremely quick and eager to pick up the devices but as soon as I click on sync it shows "Looking for iDevice" and then the device disappears. I have found that initiating the sync from the Settings app on the device prevents this issue.
It does however seem as if it is worse with Windows 7. I did not have so many issues with my previous Windows Vista PC.
Sorry I cannot be of any help.

N95 8Gb USB Data Transfer Mode not working

I have a bizarre problem with USB Data transfer.
a) I upgraded to the new 15.x firmware with the correct HKCSL package - 0557980
b) I connected PC #1 in data transfer mode with no issue and copied a bunch of installers onto the mass memory and went on to install them - to the PHONE memory.
c) Later in the day, connected PC #2 and did the same with the last few applications.
d) Next day tried to connect PC #1 and it didn't work
e) Thought I must have an application using the MASS storage but checked and not so - all apps on Phone memory.
f) Went to PC #2 and tried - Data transfer mode works - no problem.
g) Tried PC #1 again, and still not working. I get all the right messages (Mass storage cannot be used at this time etc) on the handset, and I get the "safely remove hardware" option appearing on the PC - but I don't get a drive letter assigned in the Windows Explorer.
h) I have tried it on PC #3 and this works as well - no problem.
1. The working PC's both have PC Suite 2-Beta installed, while the problem PC has no PC suite at all.
2. I have downloaded the Nokia-connectivity_cable_driver_rel_6_85_10_0 and it installs properly - giving all the expected wireless... options in Device Manager, but I still don't get a drive letter assigned with the basic data transfer mode on this problem PC #1
So the issue seems to be with a PC that has never seen any version of PC suite, but it worked straight after the firmware upgrade.
All PC's are XP SP2.
Any suggestions on anything else to try ?
Regards

SOLVED by:
- attaching N95, selecting USB Data Transfer Mode
- Going to Device Manager
- Selecting the USB Mass Storage Device for N95
- "Uninstall"
- Remove cable when N95 says its safe to
- Re-attach cable
The PC then re-discovered and reloaded the drivers including the mass storage which then worked normally.
No idea what messed it up in the first place though.

2008 R2 GPO - Turn network discovery on not working

Hi
I'm migrating several computers into a new domain with ADMT but all computer migrated (XP,7 and 8) could not enable network discovery.
I've made a GPO (found on technet) that should work but users still are unable to browse network. Gpo is applied (checked with rsop) and sincerly i've no ideas on what to check to understand why the GPO is not working. Any idea on something to check or change?
I copy the gpo here to check it.. thanks in advance
Computer Configuration (Enabled)hide
Policieshide
Windows Settingshide
Security Settingshide
Windows Firewall with Advanced Securityhide
Global Settingshide
Policy
Setting
Policy version
2.10
Disable stateful FTP
Not Configured
Disable stateful PPTP
Not Configured
IPsec exempt
Not Configured
IPsec through NAT
Not Configured
Preshared key encoding
Not Configured
SA idle time
Not Configured
Strong CRL check
Not Configured
Inbound Ruleshide
Name
Description
Network Discovery (Pub-WSD-In)
Inbound rule for Network Discovery to discover devices via Function Discovery. [UDP 3702]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
%SystemRoot%\system32\svchost.exe
Action
Allow
Security
Require authentication
Authorized computers
Authorized users
Protocol
17
Local port
3702
Remote port
Any
ICMP settings
Any
Local scope
Any
Remote scope
Local subnet
Profile
All
Network interface type
All
Service
fdrespub
Allow edge traversal
False
Group
Network Discovery
Network Discovery (LLMNR-UDP-In)
Inbound rule for Network Discovery to allow Link Local Multicast Name Resolution. [UDP 5355]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
%SystemRoot%\system32\svchost.exe
Action
Allow
Security
Require authentication
Authorized computers
Authorized users
Protocol
17
Local port
5355
Remote port
Any
ICMP settings
Any
Local scope
Any
Remote scope
Local subnet
Profile
All
Network interface type
All
Service
dnscache
Allow edge traversal
False
Group
Network Discovery
Network Discovery (WSD-In)
Inbound rule for Network Discovery to discover devices via Function Discovery. [UDP 3702]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
%SystemRoot%\system32\svchost.exe
Action
Allow
Security
Require authentication
Authorized computers
Authorized users
Protocol
17
Local port
3702
Remote port
Any
ICMP settings
Any
Local scope
Any
Remote scope
Local subnet
Profile
All
Network interface type
All
Service
fdphost
Allow edge traversal
False
Group
Network Discovery
Network Discovery (SSDP-In)
Inbound rule for Network Discovery to allow use of the Simple Service Discovery Protocol. [UDP 1900]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
%SystemRoot%\system32\svchost.exe
Action
Allow
Security
Require authentication
Authorized computers
Authorized users
Protocol
17
Local port
1900
Remote port
Any
ICMP settings
Any
Local scope
Any
Remote scope
Local subnet
Profile
All
Network interface type
All
Service
Ssdpsrv
Allow edge traversal
False
Group
Network Discovery
Network Discovery (WSD Events-In)
Inbound rule for Network Discovery to allow WSDAPI Events via Function Discovery. [TCP 5357]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
System
Action
Allow
Security
Require authentication
Authorized computers
Authorized users
Protocol
6
Local port
5357
Remote port
Any
ICMP settings
Any
Local scope
Any
Remote scope
Any
Profile
All
Network interface type
All
Service
All programs and services
Allow edge traversal
False
Group
Network Discovery
Network Discovery (WSD EventsSecure-In)
Inbound rule for Network Discovery to allow Secure WSDAPI Events via Function Discovery. [TCP 5358]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
System
Action
Allow
Security
Require authentication
Authorized computers
Authorized users
Protocol
6
Local port
5358
Remote port
Any
ICMP settings
Any
Local scope
Any
Remote scope
Any
Profile
All
Network interface type
All
Service
All programs and services
Allow edge traversal
False
Group
Network Discovery
Network Discovery (NB-Datagram-In)
Inbound rule for Network Discovery to allow NetBIOS Datagram transmission and reception. [UDP 138]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
System
Action
Allow
Security
Require authentication
Authorized computers
Authorized users
Protocol
17
Local port
138
Remote port
Any
ICMP settings
Any
Local scope
Any
Remote scope
Any
Profile
All
Network interface type
All
Service
All programs and services
Allow edge traversal
False
Group
Network Discovery
Network Discovery (NB-Name-In)
Inbound rule for Network Discovery to allow NetBIOS Name Resolution. [UDP 137]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
System
Action
Allow
Security
Require authentication
Authorized computers
Authorized users
Protocol
17
Local port
137
Remote port
Any
ICMP settings
Any
Local scope
Any
Remote scope
Any
Profile
All
Network interface type
All
Service
All programs and services
Allow edge traversal
False
Group
Network Discovery
Network Discovery (UPnP-In)
Inbound rule for Network Discovery to allow use of Universal Plug and Play. [TCP 2869]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
System
Action
Allow
Security
Require authentication
Authorized computers
Authorized users
Protocol
6
Local port
2869
Remote port
Any
ICMP settings
Any
Local scope
Any
Remote scope
Any
Profile
All
Network interface type
All
Service
All programs and services
Allow edge traversal
False
Group
Network Discovery
Outbound Ruleshide
Name
Description
Network Discovery (Pub WSD-Out)
Outbound rule for Network Discovery to discover devices via Function Discovery. [UDP 3702]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
%SystemRoot%\system32\svchost.exe
Action
Allow
Security
Require authentication
Authorized computers
Protocol
17
Local port
Any
Remote port
3702
ICMP settings
Any
Local scope
Any
Remote scope
Local subnet
Profile
All
Network interface type
All
Service
fdrespub
Group
Network Discovery
Network Discovery (LLMNR-UDP-Out)
Outbound rule for Network Discovery to allow Link Local Multicast Name Resolution. [UDP 5355]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
%SystemRoot%\system32\svchost.exe
Action
Allow
Security
Require authentication
Authorized computers
Protocol
17
Local port
Any
Remote port
5355
ICMP settings
Any
Local scope
Any
Remote scope
Local subnet
Profile
All
Network interface type
All
Service
dnscache
Group
Network Discovery
Network Discovery (WSD-Out)
Outbound rule for Network Discovery to discover devices via Function Discovery. [UDP 3702]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
%SystemRoot%\system32\svchost.exe
Action
Allow
Security
Require authentication
Authorized computers
Protocol
17
Local port
Any
Remote port
3702
ICMP settings
Any
Local scope
Any
Remote scope
Local subnet
Profile
All
Network interface type
All
Service
fdphost
Group
Network Discovery
Network Discovery (UPnPHost-Out)
Outbound rule for Network Discovery to allow use of Universal Plug and Play. [TCP]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
%SystemRoot%\system32\svchost.exe
Action
Allow
Security
Require authentication
Authorized computers
Protocol
6
Local port
Any
Remote port
Any
ICMP settings
Any
Local scope
Any
Remote scope
Local subnet
Profile
All
Network interface type
All
Service
upnphost
Group
Network Discovery
Network Discovery (SSDP-Out)
Outbound rule for Network Discovery to allow use of the Simple Service Discovery Protocol. [UDP 1900]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
%SystemRoot%\system32\svchost.exe
Action
Allow
Security
Require authentication
Authorized computers
Protocol
17
Local port
Any
Remote port
1900
ICMP settings
Any
Local scope
Any
Remote scope
Local subnet
Profile
All
Network interface type
All
Service
Ssdpsrv
Group
Network Discovery
Network Discovery (WSD Events-Out)
Outbound rule for Network Discovery to allow WSDAPI Events via Function Discovery. [TCP 5357]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
System
Action
Allow
Security
Require authentication
Authorized computers
Protocol
6
Local port
Any
Remote port
5357
ICMP settings
Any
Local scope
Any
Remote scope
Any
Profile
All
Network interface type
All
Service
All programs and services
Group
Network Discovery
Network Discovery (WSD EventsSecure-Out)
Outbound rule for Network Discovery to allow Secure WSDAPI Events via Function Discovery. [TCP 5358]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
System
Action
Allow
Security
Require authentication
Authorized computers
Protocol
6
Local port
Any
Remote port
5358
ICMP settings
Any
Local scope
Any
Remote scope
Any
Profile
All
Network interface type
All
Service
All programs and services
Group
Network Discovery
Network Discovery (NB-Datagram-Out)
Outbound rule for Network Discovery to allow NetBIOS Datagram transmission and reception. [UDP 138]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
System
Action
Allow
Security
Require authentication
Authorized computers
Protocol
17
Local port
Any
Remote port
138
ICMP settings
Any
Local scope
Any
Remote scope
Any
Profile
All
Network interface type
All
Service
All programs and services
Group
Network Discovery
Network Discovery (NB-Name-Out)
Outbound rule for Network Discovery to allow NetBIOS Name Resolution. [UDP 137]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
System
Action
Allow
Security
Require authentication
Authorized computers
Protocol
17
Local port
Any
Remote port
137
ICMP settings
Any
Local scope
Any
Remote scope
Any
Profile
All
Network interface type
All
Service
All programs and services
Group
Network Discovery
Network Discovery (UPnP-Out)
Outbound rule for Network Discovery to allow use of Universal Plug and Play. [TCP]
This rule may contain some elements that cannot be interpreted by current version of GPMC reporting module
Enabled
True
Program
System
Action
Allow
Security
Require authentication
Authorized computers
Protocol
6
Local port
Any
Remote port
Any
ICMP settings
Any
Local scope
Any
Remote scope
Any
Profile
All
Network interface type
All
Service
All programs and services
Group
Network Discovery
Connection Security Settingshide
Administrative Templateshide
Policy definitions (ADMX files) retrieved from the local machine.
Network/Link-Layer Topology Discoveryhide
Policy
Setting
Comment
Turn on Mapper I/O (LLTDIO) driver
Enabled
Allow operation while in domain
Enabled
Allow operation while in public network
Enabled
Prohibit operation while in private network
Enabled
Policy
Setting
Comment
Turn on Responder (RSPNDR) driver
Enabled
Allow operation while in domain
Enabled
Allow operation while in public network
Enabled
Prohibit operation while in private network
Enabled
User Configuration (Enabled)hide
No settings defined.

Hi,
To enable Network Discovery, we need to make sure that the following dependency services are started on clients:
DNS Client
Function Discovery Resource Publication
SSDP Discovery
UPnP Device Host
Regarding this point, the following article can be referred to for more information.
You cannot turn on Network Discovery in Network and Sharing Center in Windows Server 2008, Windows Server 2008 R2, or Windows Server 2012
http://support.microsoft.com/kb/2722035
We can use group policy to control these services.
Regarding this point, the following article can be referred to for more information.
How to use Group Policy to control Services
http://www.grouppolicy.biz/2010/08/how-to-use-group-policy-to-control-services/
Best regards,
Frank Shen

Windows Network Shares do not work properly

Ever since installing LEOPARD (now running 10.5.2) my network shares on our Windows server are not working properly. I can connect in the office via cifs:// and the share appears. I cannot copy a file to the share. I get the following message:
"The operation cannot be completed because you do not have sufficient privileges for some of the items."
There is an icon with a size of 0kb on the share, and if I try to open it or trash it, I get a message telling me it is in use by the MAC OS. I can open a file from the share, but if I try to save it back to the share or save from an application I get a "There has been a network file permission error."
If I try to copy the file to my desktop. I get a message that tells me that I don't have permission.
If I try to connect using https:// I get a username or password not valid message. Both of the connection methods worked BEFORE I installed LEOPARD. The install was a clean install, not an upgrade. I NEED to be able to access the shares for my work. The shares are on a server running Windows Server 2003 Service Pack 2.
How can I solve this? I actually have administrator privileges on the server with my login credentials, but this does not seem to matter.

Experiencing the same exact problems here. Brand new Mac Pro on a Windows 2003 Server network. Somehow I don't think it is any rights problems in my case, as I can create and erase folders (created by me or others), and the Mac writes the .DS_Store files to the server...
However, if I try to copy a single file or a folder containing files to the server, I get only a 0k file (inside the folder if I copy a folder) and after a while an error message saying the same things William Colvin2 mentions above (not sufficient privileges).
Everything I have read seems to indicate that there is huge problems with Leopard with regard to this, and if that is true, they need to be fixed ASAP. I think I've tried and tested all the possible "solutions" (disabling SMB digital signature, GPO policies, disabling IPv6...) but still no solution in sight.
Can we get some info from Apple on this whether it's being worked on, or what we can do to SOLVE this problem? As far as I know, Windows 2003 Server hasn't changed in that respect recently, whereas OSX has gone from 10.4 Tiger to 10.5 Leopard...
Any help with solving the problem is greatly appreciated, so feel free to respond with anything that might be helpful. I would also be interested in hearing from people who have HAD this problem, but has gotten them solved. And if so, what solved it for you.
Thanks in advance.

Scan to network folder will not work for Yosemite

Scan to network folder, which is supposed to allow the unit to scan and save to a shared directory on a remote computer, does not work in Yosemite, though it will work on Macs sporting earlier OS on same network.
HP personnel have indicated that HP does not support Apple Mavericks. One can only assume then that it will not work on Yosemite either
Yet these units are still being sold to be used with Apple OSX.
Please resolve HP's position. If these units will not function properly under Mavericks and Yosemite, please explicitly say so. The scan to network feature should not have anything to do with any OS issue, and it is much more likely that the issue is faulty HP firmware.
If these units are supposed to fully function under Mavericks and Yosemite, please provide substantive resolution of the many many problems users have experienced.
The Scan to Network feature is what makes using these units viable as scanners. The fact that this works poorly at best, and not at all on any recent Apple OS, is simple acceptable

IT IS OFFICIAL
HP Case Manager has indicated that HP is abandoning Scan to Network Folder starting with Yosemite as OS security constraints present issues with using its current transport.
Of course this took an hour of double talk and fiddling about before the admission was forthcoming...
Shall we count the days until that information actually shows up in the forums?

Wireless network and bluetooth not working on touchsmart 600

This has not worked since day 1 and I have been using wired internet.
I really need to setup a home network and need to use wireless.
Research on the net has led me to belive I should have HP WIRELESS ASSISTANT on my machine... is that correct?
Everytime I try to download it is seem to be for a notepad... mine is a touchsmart desktop...
Please advise

Hi coffee12345,
Welcome to the HP Forums!
I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
What is the Product and Model Number of your desktop?
What version of Windows are you using?
Is this a recent issue, or has it been like this since day one?
Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
Please re-post with the necessary information, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Std 9.0 + Access 2007 + network connection, PDFMaker not working anymore

Hello,
when i try to create a PDF file from an Access report, it isn't working anymore when i have a network connection. It worked for months, but yesterday Access 2007 crashed and it asked to deactivate the COM Add-In from PDFMaker and my Co-Worker clicked on yes while i was absent. So even after reactivating the Add-In and reinstalling the whole Acrobat Standard, i can't create any PDFs anymore from Access 2007 while i have a active network connection. When i plug off my network cable, it's working, as soon as i plugin the network cable again, it's not working anymore. And it only happens in Access 2007, PDFMaker in Word, Excel etc is still working fine.
Anyone got some ideas or solutions?
Best regards
Chris

Can you create a PDF by printing to the printer? It sounds like you may simply need to do a repair to Acrobat.

When I switch between networks firefox is not working. I will have to close the browser and open it again!?

Hi,
I love firefox!!! I wanted it to be perfect all the time, one issue I come across with it recently is: When I switch between networks (say connecting to myoffice network through VPN when firefox is already open) firefox is not working. I will have to close the browser and open it again to make it work! could you please fix this.
Thanks.
Raja Pattamsetty

If an option or preference settings not being saved after you restart firefox see:
[http://kb.mozillazine.org/Preferences_not_saved Preferences not saved]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

DWfile.copy not working

I have an extension that I am building and I need to copy a
file automatically from the config folder to the users local site
when they apply the extension:
I've tried this:
var fileURL =
"file:///C|/Config/Objects/GJHDigital/test123.gif";
var SiteFolder = site.getLocalPathToFiles() + "Test";
DWfile.createFolder(SiteFolder);
DWfile.copy(fileURL, SiteFolder);
And I tried this:
var path =
dw.getConfigurationPath()+'/Objects/GJHDigital/test123.gif"';
var path2 = site.getLocalPathToFiles();
DWfile.copy(path, path2);
and both do not work. No errors or anything. And the folders
do exist. Does anyone know how to do this with Dreamweaver MX 2004?
Because I understand there is a new way in CS3, which I do not have
yet.

When you use DWfile.copy() you have to specify the file name
in the "Copy To" path so try this:

Query on Web , Enhanced menu- Query properties- Transfer button not working

Hello to all experts,
When We execute a query from query designer on to the web, if a user wants to go to Enhanced menu->Query properties and select any of the options existing there example "Tabular view, supress zeros ect ect " when he clicks on the button "TRANSFER at the bottom " to transfer his selected options , nothing happens... I have never seen this ? Bw netweaver platform 3.5 highest running patch is SAPKW35012
Does this have to do with any global query settings where tto look in for these settings? Also if this may help When we open query designer in local view I see that many buttons are inactive "Cell view" "Switch to global " ect and in Web application designer the "VIEW" option is grayed out as well ... Were are these settings maintained? Does anyone have any input , the most inportant being why iis the query properties "TRANSFER" button in Enhanced menu not working, i have seen no note on this
Thank you
Ayman

Hi Andy,
Nothing happened, meaning that the screen did not move, or the scaling factor was not set? Did you try to do it again?

ITunes 7.6.2 and QT 7.4.5 - network sharing still not working

Hi,
I want to share on my local network my iTunes library which is on a Leopard 10.5.2/Intel computer. The other computer is a G5 running Tiger 10.4.11
It does not work, I'm getting the -3259 error (the shared computer blocks port 3689).
In Leopard I can't just open up a specific port like in Tiger's sharing pref pane. My firewall
settings are "Allow only essential services" with Itunes added as an app that is also allowed.
The other way - from Tiger to Leopard - it works fine, because I can open 3689 for iTunes sharing.
Any idea how to fix this?
Thanks, Michal

Not sure about opening ports but I have no firewall and I was hoping the new itunes 7.6.2 and QT 7.4.5 would finally fix the streaming video problem. Why is it Front Row works fine for streaming video but itunes still slowly loads the tv show 640/480 size for ipod and it just get's hung and does not play. My work around this is to access my tv show folder and mount it on the remote computer then open the shows in quicktime and it plays almost immediately and you can jump chapters or move to different locations easily within the video that is streaming. Itunes even when it worked did not do that well and if you wanted to get to another part of the video or skip a commercial it was always slow and glitchy. Does not Compute! This started happening with the last two or three updates for itunes. Do Appletv's have this issue with streaming I wonder. Must look at the discussions for that, my guess is no because it is using front row. Cmon Apple this has been a problem for a long time. I think they want everyone to buy an Apple tv and not use their macs hooked up to a tv. My duel 1.8 g5 powermac is hooked up via dvi to my Sony HD tv and thanks to my Radeon 800xt video card and ATI diplays conrtol panel it is perfectly scaled to 1080i resolution with no over scanning. All the menus and dock are where they are supposed to be just as if you were hooked up to a computer monitor. And it does way more than an Apple TV. I am upset that Apple is only offering the HD movies for the apple tv and not for your mac. "Imagine" a new mac mini with blueray and or dvd drive, a real video card, and dvi or hdmi plus hd downloadable movies. That to me would be the dream mac for TV. You could surf anything on the web, play games, do anything you do on your mac now on your tv.
I know I am not supposed to suggest or speculate so I will stop.... but cmon apple and fix this itunes streaming bug that has been around for about eight months or so. I love apple and just bought a new Mac Pro 2.8 8 core arrives tomorrow. If I wanted to hook that up to the tv I will be stuck with the overscan/underscan issue because the new nNvidia Geforce 8800 does not have the drivers or control panel to scale the res to fit the tv. ATI has not upgraded the control panel for intel computers and there is no download available unless you get the latest version that is universal but was written for the duel core g5's.
One last thing. Is there anyone out there that does not have streaming problems with itunes sharing over a wireless network playing 640 /480 h264 videos made for ipod. I have the airport extreme G and two airport expresses G. I do stream audio with no issues via itunes out to my airpost expresses.

Link JHeadstart copy not working

Hi there,
Customer tried to download the JHeadstart evaluation copy from:
http://www.oracle.com/technology/software/htdocs/devlic.html?/consulting/9iServices/soft10g.html
Did not work, because 404 error. Could you fix that?
Thanks!
Jan Kettenis
JHeadstart Team

Hi there,
The link is fixed, but now it seems we have a problem one level deeper. When I try to download either one of the two files, it gives an error. Would you be so kind to look into that one too?
Jan Kettenis
JHeadstart Team

Network transfer/copy not working 10.8.5

Similar Messages

Maybe you are looking for