Network Utility missing / not installed??

I've recently purchased a MacBook Pro and have just noticed the network utility is not installed in the utility folder where it was on my previous PowerBook.
I'm was running Tiger on the PowerBook and the network utility was installed, can't understand why it isn't installed on the MacBook Pro.
Any ideas

Hi optiman, and a warm welcome to the forums!
I was just about to direct you to the great instructions by Kappy that Limnos already pointed to... thanks Limnos!
Though for safety, whenever something mysterious is missing, I think it would pay to first do this...
Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.

Similar Messages

Satellite C660d-14G: network controller is not installed

Hi.
I installed windows 7 on my toshiba,
I have problem with the wireless driver.
I downloaded all availible drivers on the site, but there is no change.
In the device manager write that the network controller is not installed.

Hi
> network controller is not installed.
Network controller could be Lan card or Wlan card.
Are you sure that you need to install the Wlan driver?
As far as I know the notebook has been equipped with the Atheros AR9285 802.11bgn Wlan card.
The LAN card is 10/100 Base-TX Realtek 8105E-GR
By the way: The latest Wlan drivers can be downloaded here:
http://aps2.toshiba-tro.de/wlan/?page=downloads

Juniper networks VPN: Network Connect will not install under Snow Leopard

Created different thread based on the topics from http://discussions.apple.com/thread.jspa?threadID=2130935.
With new install of Snow Leopard i get the following when trying to log into SSL VPN "Could not launch. Please restart the web browser and try again"
can not do the workarounds from the above thread since none of the directories exist. Has anyone found a fix for this?

I ran into this too (made matters worse by cleaning out the old juniper install). What I understand clearly now, which other discussions with all the happiness from people saying they fixed it seem to miss completely: Juniper only works if you installed it prior to upgrading 10.6. If you did not, you are possibly hosed.
Now, I was hosed, but I found a workaround. Find a stand-alone installer .dmg out there. As of a couple days ago it was there. I'm sure it still is. Google it. NetworkConnect.dmg.
It is version 6.0.0. It installs correctly. My company runs 6.4.0, which means the first time you open NetworkConnect after installing it prompts you to upgrade. The upgrade worked fine, so long as I was running as root.
Which brings me to my original problem which I've not seen anyone else complain about, which has me worried: after installing, NC only actually connects and functions when I run as root. I'm not talking about su - root or using sudo, I mean having to graphically switch users and log into the computer as the root user (after enabling it...using the scenableroot I think, something like that).
Has anyone else seen this behavior? I can launch Network Connect as my real user but it immediately fails with a software error. 'ncproxyd.error: Failed to gain root privileges'. Driving me batty.

Eos utility 2 not installing

I, I have a brand new 70D and i'm not able to install eos utility 2 on my computer. I already have eos utility 1. I tried with the cd and with the installation package on the canon site.
At the step 4 of the installation, it say NG (in red) Eos Uility 2, an error occurred.

Good luck. EOS Utility 2.6 Remote Live View failed to work with Leopard (10.5.6) for over 6 months before Canon and Apple finally managed to fix the problem. Apple pointed at Canon - Canon pointed at Apple.
Apple definitely made the change that broke the software (Image Capture Extension) as it also broke Nikon software and some other digital camera software.
Now that it is finally fixed, I can't upgrade to Snow Leopard because I know it will break EOS 2.6.1 Remote Live View. Yay.

IPhoto missing / not installed?

I wanted a cleaner install so I first reinstalled Leopard 10.5, with the option of archiving my previous system folder. Then I installed snow leopard 10.6 upgrade. I just went thru setting up my mac and I notice I do not have iphoto.
My question is how do I get this installed. Do I have reinstall Snow leopard or leopard. Or is there an easier way?
Thanks
Holly crap, I just realized my iphoto, idvd, and imovie are gone. Aren't these apps included in leopard 10.5 install disk or was this on a separate disk? This is bad. If I drag and drop the programs from the "previous system folder" will they work?
Message was edited by: dglenn9000

Thats my problem, Im not sure if I still have or can locate the ilife disk, for some reason I just assumed it was apart of the Leopard OS not additional software as it was already pre-installed when I bought my mac mini. So is there a way I can pull them from my previous system folder? If not I guess I will be cleaning out my garage.

IMAC G4 Tiger 10.4.10 see USB Negear WG111 in Profiler not in network util

Hello,
I have a G4 running Tiger, I have a Netgear WG111 USB V2 it is recognized in System Profiler (as Cohiba 3887 rev0) but network utility does not see it. The driver is loaded into the OS. Any help?
Thanks

Hello,
Thanks for the welcome... I rebooted and looked at Sys pref; Network; show; network port configurations.
I only see the built in products, eth0, firewire, modem. If I try to add one it only gives me those options and 6 to 4.
So it doesn't appear to be recognized, add to that the Netgear app which is for 10.4 is showing in my apps and when I open it it appears to hit the dock as the line moves as if it will add it but doesn't load there. This could be my issue going to try and reload it.

HT5022 What works with Mountain Lion? AirPort Utility 5.6 will not install on Mountain Lion.

What gives? The AirPort Utility 5.6 wil not load on a computer running Mountain Lion. Attempted both on an iMac and Macbook.

That is correct, the 5.6 version of the AirPort Utility will not install under Mountain Lion ... but it will run on it once installed. One option is to use a utility, like Pacifist, to extract and "install" the utility into the Utilities folder.

CSA 6.0 will not install. Crashes on Patch Information.

I have tried to install CSA 6.0 a few times and it crashes on "Unable to load patch information into database. setup will now abort". can anyone tell me why this keeps happening. I have installed 5.2 just fine but I want to use 6.

If you encounter problems with installing or uninstalling the CSA, perform the following tasks:
â¢ Verify that you rebooted the server.
â¢ Verify that the Cisco Security Agent service is not disabled and that its Startup Type value is
Automatic.
â¢ Obtain the installation logs from :\Program Files\Cisco\CSAgent\log. Review the
Cisco Security AgentInstallInfo.txt and driver_install.log files.
â¢ For installations, verify that you installed the Network Shim. The driver_install.log file should state
that csanet2k.inf installed. If the Network Shim is not installed, uninstall the Agent and then install
the Agent again.
â¢ Verify that you did not use Terminal Services.

Windows xp Ethernet controller not installed

I have created a windows xp partition using bootcamp. However the ethernet and network drivers are not installed. they show up with Question marks and no amount of updating drivers seems to work. Any ideas?

Hi jugla,
if your winXP is running then insert your macOS Install disk - that's where the drivers are...

I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\......\Application Data\Apple\Apple Software Update\

I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\Documents and Settings\Aubrie\Local Settings\Application Data\Apple\Apple Software Update\)

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Connection to the deployment share could not be made (network driver not installed)

Hi guys! i bought the new laptop Dell Latitude E6510 and try to install the enterprise image but i got the error:
"A connection to the deployment share could not be made. The deployment will not proceed. The following networking device did not have a driver installed PCI\VEN_8086&DEV_10EA&SUBSYS_040B1028&REV_05."
I look on internet and i found out that it is the intel network card driver missing. So i get the driver from Dell website and i added this drivers in the MDT console.
Then i have updated the deployment share to rebuild the boot images. Everything went fine but i always get this error.
Am I missing something ?

I too was having the problem...
the single thing that I was forgetting is that while I was recreating & regenerating the images in the deployment workbench. I wasn't burning & booting from a CD...
because (aha) I'm clever & using Windows deployment services to boot across the network & save all that time burning CDs etc.
Doh, I didn't update the WIM that WDS was using...
Open your windows deployment services console,
expand out servers : <server name> : boot images
Right click your boot image (I have 2, one for x86 & one for x64),
choose "replace image" then navigate to your newly regenerated WIM images
(probably C:\deployment_share\boot) & choose the appropriate WIM file.
do this for any images you have, reboot your client machine & BAM, deployment goodness.
MS should really add a module for PXE boot (etc) into the deployment workbench rather than have 2x deployment solutions & use the deployment module from one & the boot module from the other.
Anyhoo, works now, must make a mental note to remember this in future...
Cheers Toolman
Thank you for this. This resolved the issue that I had.

I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to.

I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.

Are there any previous networks that you have used that have the same password as Molly? YES
Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
Delete any other networks that you no longer need so that your Mac will search for networks more quickly
Click OK, then click Apply
Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
Then look for any old networks that might have used the name Molly in the past and do the same for them.
Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
and then click KeyChain First Aid
Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
Quit Keychain Access
Power down the entire network...all devices...order is not important
Power up the modem first, then your main router, the other devices one at a time
Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system.

When opening iTunes I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled, reinstalled many times - nothing! help please.

When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.

Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

After an iTunes update failed to install iTunes won't open and I get lthe folloowing error messages. Program can't start because MSVCR80.dll is missing, and iTunes not installed correctly. please reinstall iTunes. Error 7( windows errpr 126)

After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.

Click here and follow the instructions.
(98815)

HT1338 How do I update osx 10.4.8 if the network admin utility is not compatible with my apple airport extreme and I an't connect to the internet?

I was given an iMac desktop computer, operating system OSX 10.4.8 (2011). The network admin utility is not compatiable with my airport extreme router, and I am unable to connect to the internet to update the software. Can someone please tell me how to update the software or download a newer version on the network admin, or how to connect this computer to the internet?
Thanks,

I assume you have a PPC. There is another update for the Intel.
PPC:
http://support.apple.com/kb/dl177
Download. Do not expand. Copy to your mac. double click on dmg icon.
Have you tried an ethernet cable?
Ethernet Bridge
Ethernet Bridge "The versatile Wireless-G Ethernet Bridge can make any wired Ethernet-equipped device a part of your wireless network." from linksys example: http://www.amazon.com/Linksys-RE1000-Wireless-N-Range-Extender/dp/B005FDXMJS/ref =sr_1_1?ie=UTF8&qid=1314563758&sr=8-1
This linksys bridge is the safest solution since it doesn't require any Mac OS drivers.
Airport ExpressAirport Express is an external unit and you can configure it as a bridge. 802.11n ( I bevieve you will need a more modern version of Mac OS X to configure. Sadly, Apple uses a configuration program to configure, not a web browser. )
USB dongle
Newer Technology MAXPower 802.11g/b Wireless USB 2.0 Stick Adapter $15.99 http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/
Newer Technology MAXPower 802.11n/g/b USB Adapter. The easiest way to add Wireless Connectivity to ANY computer! 'n' speed is the newest and fastest. $29.99 http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/

Network Utility missing / not installed??

Similar Messages

Maybe you are looking for