Network wifi drivers

hi sir i have a compaq prasario cq42 notebook and i am unable to access wifi on my laptop i need a wirless and a lan driver i tried but i didnt not found any matching with my laptop, can you please help me out with the drivers so that i can use wifi on my laptop and also i dont have a webcam driver i need that one as well

Hi: Here are the links to the lan, wifi and bluetooth drivers you need... This package contains the Realtek PCI-E Fast Ethernet NIC Driver for the supported notebook models and operating systems. File name: sp49521.exe This package contains the Broadcom Wireless LAN Drivers that are required to enable the integrated Broadcom Wireless LAN Adapter in supported notebook models that are running a supported operating system. File name: sp48591.exe This package contains software and a driver to support the Broadcom 2070 Bluetooth for supported notebook models that are running a supported operating system. The Broadcom 2070 Bluetooth Driver works together with the Broadcom WLAN Driver that supports the NIC in your notebook to enable Bluetooth connections. This package also provides additional Bluetooth Profiles. File name: sp50180.exe

Similar Messages

  • HP Notebook - 15-ac043tu - NOT ABLE TO INSTALL WIFI DRIVERS FOR WINDOWS 7 -64 BIT

    I baught HP Notebook - 15-ac043tu. I am not able to install wifi drivers in windows 7 home edition . I have downloaded all drivers from HP Link shown below, http://support.hp.com/in-en/drivers/selfservice/hp-15-ac000-notebook-pc-series/7771404/model/8326116#Z7_3054ICK0K8UDA0AQC11TA930C7 Can anyone help me ?

    Hi I am facing a similar issue,Last week I bought my friend this Hp Notebook 15 (15-ac043TU) with DOS, I installed Win8 (64bit) and tried installing drivers from 'http://support.hp.com/, but its not accepting the WLAN drivers, I tried many, available for this model for win7 as well as for win8.1, wondering there was no win8 option, however it should work for Win8, I also followed your suggest but got the same error - "Update.cpp 1205" If you need Hardware Id, on 'Network Controller' - properties in devices manager, it is -PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 Thank you and Regards:Gagan

  • Installation CDs : which network card drivers are included ?

    Hello,
    I intend to install Arch on a laptop with Broadcom and Atheros network cards (LAN and Wifi).
    I would like to check which network card drivers are present on the Arch installation CDs to check compliance with this laptop.
    Where can grab this info ?
    Thanks.
    Bye,
    Bruno

    Thanks for attention.
    The network cards present on my laptop (Acer Aspire 4750) are :
    Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PC-Express) (rev 01)
    Ethernet controller: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe (rev 10)
    I would like to check if the needed drivers (one or both) are included in the installations CDs (netinstall / core).
    Bye,
    Bruno

  • HP Probook 4440s WIFI Drivers Not Working After Windows 10 Update

    I updated my Hp ProBook 4440s from windows 7 32 bit to Windows 10 32 bit, everything is working except for my WiFi it says 'Windows did not detect any networking hardware' Can you please provide me with the compatible wifi drivers for Windows 10 Pro 32 bit. I hope you can help

    Hi: I guess what I meant to say is that you may want to play around with some of the advanced settings for the card in the device manager. It seems that reading the article you posted, that procedure may have been for folks that have Cisco software to allow for Virtual Private Networking (VPN) and I don't think the drivers you have include any Cisco extensions. You can see if there is Cisco networking software by going to the Programs menu in the control panel and see the list of programs installed. There are usually 2-3 Cisco networking software items listed if you do. Sometimes tweaking those advanced settings help.  Here is an article that explains what some of these settings are for. http://superuser.com/questions/342759/can-somebody-explain-about-wi-fi-device-manager-settings-and-power-settings-in-w The ones I normally change are:  Enable WMM.  Set Roam tendency to conservative.  Roam decision to optimize distance. I had to change some setting on an old Intel 5300 wireless card to allow it to connect in W10.   The drivers were there, etc but when I went to connect to a network, it did nothing.

  • SM30-304 Wireless/WiFi drivers

    I have recently had problems connecting my SM30-304 laptop (part number PSM30E-0QKJ1-5U) to my home wireless network which uses PSK securtiy. The router is Netgear and I am running Windows XP Home SP2.
    The network is visible, however when I try to connect to it, Windows does not prompt me to enter the password for the network and refuses to aquire an IP address from the router. The drivers installed for the network adapter date from 2003 and do not support PSK security?
    I downloaded the latest WiFi drivers from the following address: http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/product_page.jsp?service=UK&PRODUCT_ID=77064
    however upon attempting to install them, an error appears claiming that they are the wrong ones for the card?
    I am not sure where to go from here as I am not sure WEP will be usable in this instance. Did I get the correct drivers for the device or is there another problem?
    Thanks
    -Jonskichov
    Message was edited by: jonskichov

    Hello
    In my opinion problem is something else. If your WLAN is visible that shows that WiFi card works well. If you can not connect it to your local WLAN it is because of settings.
    Try to remove WLAN protecting for a short time and check if you can use it in this case.

  • Wifi drivers not found - Toshiba satellite c660 PSC1LE - windows 7 64Bit

    Hi,
    I'm looking for the wifi drivers for my Toshiba satellite c660 PSC1LE laptop.
    Already tried this search: http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
    and 0 resaults...
    my newly installed windows 7 home premium 64Bit doesn't identify any wifi device, and after installing a driver from a different source my computer gets stuck while trying to connect to a network.
    Do you have any idea what can I do? How to get my internet running?
    I really need some help...
    Thanks!

    thank god!
    after a weak struggling with it, I finally managed to get it to work...
    http://aps2.toshiba-tro.de/wlan/?page=downloads
    If you are having the same problem, find your laptop's specifications, find your wifi adapter, search for the drivers for it.
    sorry guys, and thanks!
    I saw there were some questions regarding the same problem but no answers.
    I hope this will help people.

  • No network, WiFi, 3G after iOS 7.0.6 Update (iPhone 4s)

    Following my update to iOS 7.0.6 which completed with no apparent problems, my phone has lost all connectivity to my network, WiFi and 3G services.
    'Carrier Settings' no longer appears in my Settings menu, and in 'About' I cannot view IC, or IMEI number - they appear to have disappeared. Furthermore, Network appears as "Not available".
    Instead of 'Sim Fault', 'No Sim', or carrier information in the top left of the screen I have 'Searching' instead.
    I have spoken to my network provider who cannot provide me an answer, and instead have pointed me in the direction of Apple.
    I have attempted the following thus far with no result:
    Soft reset - same result
    Recovery mode reset - same result
    Reset all settings and content - Not possible as cannot verify Apple ID password with no internet connectivity
    Reset carrier settings - same result
    Restore iPhone via iTunes - Not possible as cannot turn off Find My iPhone, cannot verify Apple ID to turn off function without internet connectivity
    Attempted different sim in same phone - no change, 'Searching' still present in top left and no WiFi / 3G
    Please if anyone can offer any support in this matter I would greatly appreciate it.

    I just updated from iOS 7.0.4 to 7.0.6 and now my carrier signal is UNSTABLE. It will have a complete signal with 3G, and then after a few seconds the 3G signal will be lost and then the carrier symbol will be lost, and then the signal bar will decrease from 5 bars to no signal at all and then just repeat the cycle.   I can receive messages but only when the signal is complete. I'm very frustrated coz i also use mg 3G connection as my internet through tethering but since the signal is unstable, i can't use it properly!

  • Do I need to reinstall my network card drivers?

    I just got off the phone with a second level tech from Adelphia. I called because webpages are taking a long time to load (among other things). All the tests he ran checked out fine. He said that I needed to contact Apple and have them help me uninstall and then reinstall my network card drivers.
    Has anyone heard of this? If so, can someone step me through it? Thanks

    Hi, Lori. Welcome to Apple Discussions.
    What version of iPhoto are you using?
    You may receive better attention to your problem by choosing the proper iPhoto Forum from the iPhoto Category of Discussions and posting the question there.
    This type of problem can sometimes be caused by a hard drive that is too full, also. How much space remains available on your hard drive?

  • TS1398 I only want my secured network wifi but keeps searching for others.  Tried turning on an off wifi and on and off secured networks and ignore other networks, but keep coming back. Any suggestions.

    I only want my secured network wifi but keeps searching for others.  Tried turning on an off wifi and on and off secured networks and ignore other networks, but keep coming back. Any suggestions.

    That's not the way wifi works.
    You may see the other networks but you are not connected to them in any way.

  • [W520] Can't install updates for Intel WiDi or WiFi drivers

    The Lenovo ThinkVantage System Update is telling me there are Intel WiDi and WiFi drivers available.  When I try to install them they seem to install fine, I get a Windows pop-up saying 'you're new hardware has installed correctly', then my system restarts and the updates are still listed as new available updates.  In the ThinkVantage update history it says for both "Did not install".  When I look at the driver version for the WiFi driver it is 14.03.0000.0 but I already have version 15.1.0.18 according to the ThinkBantage Toolbox System Information.  So I already have the newest drivers?  Why is the Update tool prompting for these updates?  Should I just hide these updates?  I don't care about WiDi but I'd like to have the newest WiFi drivers.
    W520 i7-2720QM | 32 GB RAM 1333 MHz | FHD 1920x1080 | Quadro 1000M | Windows 7 & Ubuntu 14.04
    Crucial M500 480GB mSATA + 2 x 1 TB Hitachi Travelstar 7200 rpm | BIOS 1.38

    Hello biznatch,
    I understand the frustration this must cause you.  If You uninstall and reinstall the System update and the WiDi and WiFi drivers. This could fix your problem.
    You can find the System Update Driver here:
    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063273
    Here is the WiDi Driver:
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014948
    And Here is the WiFi Driver:
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS030245
    Let us know how it goes,
    I hope this helps,
    Alex
    Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve the problem you encountered? Click Solution Provided to let us know!
    What we Do in Life will Echo through Eternity. -Maximus Aurelius

  • Refreshed pc and lost all network controller drivers

    Upgraded to Windows 8. Made file history backup then clicked Refresh My PC & it uninstalled ALL of my Network Controller Drivers, so no more Network connections or settings of any kind. The only Recovery DVDs are for W 7. Do I have to reinstall 7 & then 8? With my 3 System Recovery DVDs, I also got an Application and Driver Recovery DVD. Can I Use that one to recover just the drivers I need without reinstalling the whole W 7 system from the other DVDs? Much Thanks in advance!

    Hi:
    I will need the HID"s for the unknown devices.
    Install this driver first and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110503-1&cc=us&dlc=en&lc=en...=
    The rest of the drivers you need are:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110126-1&cc=us&dlc=en&lc=en...=
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111691-1&cc=us&dlc=en&lc=en...=
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110512-1&cc=us&dlc=en&lc=en...=
    One of the unknown devices is probably this...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1&cc=us&dlc=en&lc=en...=

  • Wireless network controller drivers

    where can I find hp 14 HP 14-d037tu wireless network controller drivers. it's running windows 7 ultimate 64 bit
    This question was solved.
    View Solution.

    Hi:
    Based on the hardware ID's you posted, these are the drivers you need...
    Wireless:
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_131223_1
    Bluetooth:
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_130390_1

  • How to update my wifi drivers

    I have a macbook running Vista Home Premium (2gb RAM), the sound is awful and stutters, skips...etc, ahhhhh Windows, we love you! Anyway, I unfortunately need to use it, and a suggestion has been to upgrade all wifi drivers.
    Firstly, wont they be upgraded automatically by my apple software updates?
    Secondly, if not, how do I find out the makes so that I can upgrade. I've tried "About My Mac".
    Thanks for any help!

    If your iPad has no cameras on it, it is a first generation iPad 1
    The original iPad 1 cannot be upgraded past iOS 5.1.1.
    Sorry.

  • Windows 10 Technical Preview - Wifi Drivers

    Anyone having an issue with wifi drivers on Windows 10? If so, please provide:
    A description of the problem
    Model and P/N
    Wifi driver info
    Thanks,

    I have similar problem to above, but a different wireless adapter. Using T440s. Upgraded to windows 10 pro x64 and most things are working well however the wifi is very wonky. The T440s is in the same room as the router so signal strength is not an issue, and all was working well on windows 7 before upgrading. While there is connectivity, the throughput is fluctuating. It will be ok for a few seconds (6-10MB/s) then the connection will die and drop to 0MB/s. Then it will go really slow, 30-60KB/s, then perhaps it will climb back up to normal speeds. Sometimes it will just stay dead. I have noticed in the connection properties window the value for Speed is changing, this is something that I have never seen before. In the past, it was always "Speed:                                    300.0 Mbps" Now it's fluctuating to all sorts of different values, I've seen 300, 270, 150, 235, 27, 36, 210, it's all over the place. Here are some screenshots: https://dl.dropboxusercontent.com/u/98455184/Screenshot%202015-07-31%2022.05.02.png https://dl.dropboxusercontent.com/u/98455184/Screenshot%202015-07-31%2022.38.06.png Hopefully that will help someone point out what is wrong. When i connect through ethernet, all is good and full speed is constant. I have tried installing some different drivers, including the ones from lenovo driver page and some from the intel driver page, all have the same issue. The adapter is  "Intel Dual Band Wireless 7260AC with Bluetooth 4.0" Have tried driver 18.11.0.8 from lenovo and also one from the Intel site, happens on both. :UPDATE:  After looking at the readme for these drivers i seen this in the 'limitations' section: "Bluetooth and Wi-Fi radio are both operating on the same 2.4 GHz band. When both of them are used simultaneously, you may see slower communication    speed and/or reduced communication range caused by radio interference." I have confirmed this is my issue, extensive testing shows consistently that when my bluetooth mouse is off the issue does not exist. Not sure how to proceed, I can't change my router to 5ghz as there are incompatible devices in the house.

  • Is there a maximum number of Network Filter Drivers in Windows 7?

    I recently tried to install Windows XP Mode on my Windows 7 laptop, and experienced a number of failures...
    According to a post elsewhere on this forum (http://social.technet.microsoft.com/Forums/en-GB/w7itprovirt/thread/00c74bd9-da7b-4acb-ae5a-7112377bc7e2), one of the possible causes of this is if the maximum number of network filter drivers is installed - from Thayu:
    "From your logs, the error is 0x8004a029, which basically indicates that the maximum number of network filter drivers has been reached.
    Could you uninstall any other network filter driver that you think is not necessary and try installing VPC again?"
    So, I uninstalled Cisco VPN, and retried the XP Mode installation, which now worked... However, I am now unable to re-install Cisco VPN - presumably for the same reason...
    The software I have installed that seems relevant is:
    Symantec Endpoint Security
    Checkpoint VPN-1 SecureClient
    Microsoft Virtual PC 2007 (XP Mode)
    So, am I right in thinking the maximum number of network filter drivers in Windows 7 is 3??  Is this configurable??
    This is a really worrying limit for me, as I have a number of customers that I have to be able to connect to, requiring both CheckPoint and Cisco VPN software to be installed... I also require XP Mode to connect by VPN to legacy clients that don't support the MS-CHAP2 protocol, and I'd be stupid to run without Anti-virus...
    Any suggestions?
    Nick

    Hi,
    Based on my research, I would like to answer you that the maximum number of network filter drivers in Windows 7 is 14. However, it is hard coded to allow 14 filter drivers. By default, the number is 8. To view the number or modify the number, please access the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network\MaxNumFilters
    Usually, the network filter drivers are listed in the Network Connection’s Properties. Also, it can be located by some third party programs, such as antivirus program.
    Thanks,
    Novak

Maybe you are looking for

  • Text Box Entry Validation

    We have a program that once a user enters a character the cursor jumps to the next entry box, they do not have to press Enter.  For example, we want the learner to type in the character 'H' for Home or 'B' for Business (or 'h' or 'b') for the type of

  • Texture in a box - problem(wrong colours)

    hello guys I want to create a box with a texture of chess board on top of it, but the problem is that it loads just a dark blue colour surface instead of blue and white squares surface,feel free to check what I mean, here is what the program shows ht

  • Help ipod not showing up in itunes...ive already done everything it says to

    so i downloaded some new songs and then started to update my ipod and it said there was an error trying to write to the disk so i thought one of the songs may have been bad so i deleted them and tried to update it again and then my ipod went wompy an

  • I have two Wi-Fi network names by mistake

    I seem to have set up two different Wi-Fi network names by mistake. I was having trouble with my routers (Airport Extreme, and Airport Express), and I did a hard re-set with both. The network name that I was used to using didn't show up after the re-

  • Extractor Infomation

    Hello, My company is not subscribing www.bwexpertonline.com magazine so if anybody in this forum having subscription could you please post here Here are Artical Information 1. Nathan Genez, Develop a Custom DataSource Using the Generic Extractor (BW/