Network with Airport Extreme, Airport Express and Time Capsule

Hi,
I have a good internet connection working perfectly in the following order. ISP connected by ethernet (cable) to an AE and this extended to an EX and this extended to a new TC. The AE and AX are 801.11 b/g/n but not dual as the new TC. My question is. If I work with an iPhone, the AE is going to work just with g forcing to TC to work with g as well with the rest of the equipments (AppleTV, other iPhones, iMac? I have an iMac that should be connected to the new TC and I would like to do it by 802.11n, is it possible in this configuration? I now that it would better if I organize the network with the new TC (dual) first. However, the TC is too far from the iMac and this is not my favorite option.
Another question is:
The new TC is very close to AppleTV but wirelessly. Will I increase the speed for watching movies which are placed at TC (through external disks connected to the USB in the new TC) if I connect the TC to AppleTV using an ethernet cable?
Thanks,
Jokin

... My question is. If I work with an iPhone, the AE is going to work just with g forcing to TC to work with g as well with the rest of the equipments
The answer is yes, but I believe you can avoid that by having the iPhone connect only to the new dual band TC. Configure *everything else* to run an 802.11n network exclusively - not "802.11n (b/g compatible)". This way the iPhone will be unable to connect to that network, causing it to run in the slower b/g compatible mode. Your iPhone will work fine, as long as it remains within range of your TC's 802.11g wireless network.
Remember that you will need to change all your equipment's settings: the Extreme, the Express, the TC, and maybe the AppleTV.
Galt's rule of networking: "The number of problems you encounter increases exponentially with the number of devices on your network."
So... proceed methodically.
The new TC is very close to AppleTV but wirelessly. Will I increase the speed for watching movies which are placed at TC (through external disks connected to the USB in the new TC) if I connect the TC to AppleTV using an ethernet cable?
The speed will be limited by the slowest link in your network chain. A wired network is always preferable, since it cannot be affected by interference or obstructions.
If you are streaming movies from the Internet, your wireless link will probably be the limiting factor.

Similar Messages

Conflicts with Airport Express and Time Capsule

I am using Airport Express and Time Capsule at the same time. Connection to the web is via a router. Very often I do have conflicts. How shall I connect the gadgets? At the moment I connect the router to Airport Express (network cable).
Time machine back up doesn't work properly.
Is there anybody able to help me?
Regards

What broadband type do you have?
It can be impossible to plug a TC into the existing connection because the virgin media router has special setup or logins which are not revealed to end users.
If it is a fibre connection for instance the TC may simply not work. They have issues with many fibre ISP putting the gateway address outside the subnet of the main public IP.. (don't worry if it is too technical .. it amounts to .. it don't work! )
You may need to wait until Sat.
Get in a big supply of home videos or something and try and starve off your addiction.

Best way to extend wireless via airport express and time capsule

best way to extend wireless via airport express and time capsule
i live in a two storey house where i use my airport express to create a wireless network in the main floor, and time capsule to extend it in the upper floor, where my room is. i have like 16 mbps in the main floor, and 2-3 mbps in the upper floor after having speediest.
i used time capsule in the upper floor because i use wireless backup daily and don't want to put internet down while i im doin it and consequently my parent can have internet access in the main floor, am i right? or do i have make just the opposite in order to have a good internet speed?
secondly, while checking airport express wireless mode on airport utility, there is like 4 different type of radio mode(802 11n bg comp, 802 11n 2.4, 802 11n a comp, 802 11n 5ghz) which i have no idea what they mean
what do you recommend?
we have like iphone4, iphone 3g, mbookpro, ipad, ipad 2, samsung tv and a sony vaio laptop in the wireless network
thank you

What you have would appear to be working but I can comment how I would redefine your setup. Note that both Airport Express and Time Capsule can function as wireless base stations so you do have wireless everywhere and at all times — using the Time Capsules for backups doesn’t mean your parents won’t have internet access regardless of the where the base stations are located.
You appear to have devices to connect to your network that use the 2.4 GHz band with 802.11g such as the iPhone 3G and perhaps the 5 GHz band with 802.11n such as likely the Macbook Pro if it’s a recent model. The iPhone 4 can use 5 GHz and 802.11n. Can’t comment on the Sony and Samsung but you can check their specs.
Now the Time Capsule (if it’s a recent version), can simultaneously supply 2.4 GHz and 5 GHz band signals, but the Airport Express (if it’s recent) can only use one of those bands at one time. Likely the lowest common denominator for your devices is going to be the 2.4 GHz band since the devices that are capable of using 5 GHZ also support 2.4 GHz. If you don’t use 5 GHz, you won’t lose much in a two-storey home because likely it’s the 2.4 GHz band is better signal anyway because 5 GHz signals drop off quickly with several walls/floors to penetrate.
You also didn’t mention if the Airport Express is used to support a printer and/or AirPlay (using iTunes to play on remote speakers via the Airport Express connection) but that might also be a factor in the best location to place the Airport Express. Although the printer could be switched between the Time Capsule and the Airport Express if needed, only the Airport Express will support your remote speakers.
Recommend you use the Time Capsule as the Base station. When using Airport Utility to define the network, after you name your network, etc., select the Wireless tab, check the box “Allow this network to be extended” and set the Radio Mode to "802.11n (802.11b/g compatible)”.
Using the Airport Utility, click on the Airport Express; after you define the device and network name, select the Wireless tab, define the Wireless Mode as “Extend a Wireless Network” and check the box “Allow wireless clients”.
Hope that helps.

Extending wifi with airport express and time capsule

Hi All
I'm new to macs and moving over in a big way!
I started with a time capsule and all was fine apart from the coverage in the house.
It seemed easy to extend the wifi so purchased an AE 802.11n and extended the network.
It does extend and I can connect to the internet but the network is now really really slow and the time capsule backup wont work.
connection is :
Ethernet modem - Airport express ( as its close to my audio equipment ) - extended WIFI conection via 802.11n.
Any suggestions? why is it so slow?
Im at 7.3.1 firmware on both AE and time capsule and the Macbook pro is at 10.5.3.
Any suggestions?

I've managed to change the 5gHz of ther Airport Express that's extending the network.
As mentioned, main AE is on channel 48, and I now have the 2nd AE on channel 36 - which means my TV can now see the network. Also tested speed via my mavbook air on the same 5gHz network as it all seems OK (A while ago I spotted my Time Capsule was on the same channel 48 as main AE and throughput was abysmal! Bad enough to make me reset the TC to factory defaults and setup again - which is when the TC got channel 120).
Anyway, the fix... I changed the 2nd AE to create a wireless network (instead of extend), and manually set the channel to 36. I then set it back to extend, and it seems to have kept channel 36.

Airport Express and Time Capsule connection issues

I have the following setup:
- Airport Express set up as 'create a wifi network' with the exact same name and password as my main network from my BT router
- Time Capsule setup to 'join existing network' which is the same name - obvioulsy! - as the other two.
Everything worked OK until fairly recently. My MBP which usually is connected to the AE n/w accessed the TC via Time Machine OK, and my iMac backed up via TM to the TC OK as well. Now, however, the TC (which is situated in range of both the AE and the main router) seems to connect sometimes to the (weaker) AE and sometimes to the (almost adjacent) main router.
If it connects to the main router network, my iMac backups are OK, but if it connects to the AE network, then TM just fails with the usual 'backup disk cannot be found' even though it is clearly visible in Finder.
Is there anyway of locking the TC into a particular network?

OK, thanks for the information.
Temporarily, disconnect the Ethernet cable from the AirPort Extreme to the Time Capsule's WAN port.
Close AirPort Utility 6.1 on the Mac if it is open
Start over by holding in the reset button on the back of the Time Capsule for 9-10 seconds, then allow 60 seconds for it to restart to a slow, blinking amber light
Connect the Ethernet cable from the AirPort Extreme to the WAN port on the Time Capsule
Click the AirPort icon at the top of the Mac's screen and wait a minute for the heading of New Apple Base Station to appear. Under that, click on the Time Capsule.
AirPort Utility will open automatically and take a minute to analyze the connection. After a minute, it will display a message that the network will be configured to "Extend".
Enter a name for the Time Capsule and click Next
AirPort Utility will take another minute to configure everything. When you see the message of Setup Complete, click Done.
You should now be able to connect to the Time Capsule wireless signal.

Printing completely broken on both airport express and time capsule

Printing seems to be broken on both my old time capsul, generation one, and a new airport express. Here's what happens.
1. Connect printer directly to the Mac and everything prints fine.
2. Reconnect printer to the Airport or timecapsule. Delete all the printers. Power cycle everything. Add printer. Print and it keeps trying to connect to the printer forever.
It use to work and it may have been a recient firmware update that broke it. Any help would be appreciated. I've been through all of the support documents and still nothing. The printer is an old Epson Stylus R280. I'm running 10.9 with all the latest drivers and updates.

If you want to run a N speeds, run a cable from Time Capsule to Airport Express, set Time Capsule as your primary router, and turn off DHCP on Airport Express. This will create two networks, your Express will have one SSID, and the Time Capsule another SSID. One G network and one N network. Don't include the express in your network, keep it separate from Time Capsule to avoid it from coming down to G speeds. Make sense?

How to extend wireless with airport express and time capsule

So, I have a time capsule & because of the thick walls in my apartment, I can barely use my ipad and iphone at night in my bedroom! (my macbookPRO stays at 3 bars however!)
I bought an airport express thinking I could plug it closer to or inside my bedroom to boost the signal - but it doesn't seem to work that way - any tips on how to set this up?
TWO ADDITIONAL Qs:
Does connecting directly to my time capsule (which i'm assuming i'd need another ethernet cable) help with the boost? (then negates the other great uses for the airport express it seems)
Isn't there a way to do the boost with the express wirelessly? I'd really love to get wireless speakers, use airplay AND be able to use my devices just two rooms away .... HELP!
thanks so much (when did apple phone support start to be closed on Sundays?)
cheers.

Suggest that you check your setup again to make sure that the settings are correct on both the Time Capsule and AirPort Express.
Open AirPort Utility, select the Time Capsule and click Manual Setup
Click the Wireless tab below the row of icons
Make sure that a check mark is entered next to "Allow this network to be extended".( If the box is not checked, the Time Capsule will not extend to the AirPort Express)
Click Update to save your settings and close AirPort Utility
Next, open AirPort Utility again, select the AirPort Express and click Manual Setup
Click the Wireless tab
Settings should look like this:
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the Time Capsule network
Check mark entered next to "Allow wireless clients"
Wireless Security = Same setting as the Time Capsule
Wireless Password = Same password as the Time Capsule network
Confirm Password
Update to save settings and close AirPort Utility
Locate the AirPort Express approximately half way between the Time Capsule and area that needs more wireless coverage. You may need to experiment on placement to find the best compomise.
Post back on your results.

Sharing an internet connection with Airport express and Time Capsule

Hi, I have been happily using a cable modem and a Time Capsule for my internet connection and wireless network. We recently added solar panels to our roof and the system needs to be connected to the internet so it can be monitored remotely. Calling Comcast is an exercise in frustration, and the solar people don't seem to know exactly how to do it, so I'm trying this.
We bought an Airport Express, thinking if it is connected with an ethernet cable to the solar system, it could somehow share the internet connection with the Time Capsule, or they could talk to each other. When I plug in the Airport Express, the only set-up option seems to be to set up a new network, which I don't think I want to do. Can anyone tell me how to set this up? Thank you!

Hi, Under Water.
You should configure the Express to "Join a wireless network" or to "Extend a wireless network". (Either one will work.)
Connect your computer to your Express via Ethernet and open AirPort Utility. Press "Manual Setup" and authenticate if necessary.
Go to the "Base Station" tab. Give the Express a name and password.
Go to the "Wireless" tab. Set the Wireless mode to "Join a wireless network" or "Extend a wireless network." Enter the name of the wireless network created by your Time Capsule (or select it from the list). Check the box that says "Allow Ethernet clients" (if you're joining) or "Allow Wireless Clients" (if you're extending).
Provide the appropriate security mode and password for the Time Capsule's network.
Press "Update" and allow your Express to restart.
Then you can plug the solar system into the Express's Ethernet port.

Airport extreme,express and time capsule

I need expand my wireless network. I have three floor . In the middle i have a time capsule with adsl. At the first floor i have airport extreme that expand signal of my wifi. In the last floor i have an aiport express but i don't Be able to configure this with third repeater.... Can i do this? Can you help me? Thank

If your AirPort Express is a 802.11n model, then configuring it to extend the TC's wireless network would be the same as you did when you configured the AirPort Extreme to do so. Please check out the following Apple Support article to make sure you didn't miss anything when you attempted to configure yours.

Error 6742 with AirPort Express and Time Capsule

Hi all,
I have an AirPort Express from 2009 and a Time Capsule from 2010. I always use my Time Capsule to join to my existing network and stream my external hard drive across my house.
Yesterday our IP router died (Virgin Media) and we are not getting a new one until Saturday the earliest... So I thought oooo I have an Airport Express spare and a Time Capsule we could use.
However when I try to connect both of them to the modem all I get is error 6742. When I have searched for this people are suggesting the hardware has died, well my Time Capsule was definitely alive and well when I tried to set it up against the modem as it was streaming my external drive. My Express, well maybe, it has been in a cupboard for a few years...
Does anyone have any ideas what I could do to set this up? I have tried a reset and a factory reset on both units.
Thanks

What broadband type do you have?
It can be impossible to plug a TC into the existing connection because the virgin media router has special setup or logins which are not revealed to end users.
If it is a fibre connection for instance the TC may simply not work. They have issues with many fibre ISP putting the gateway address outside the subnet of the main public IP.. (don't worry if it is too technical .. it amounts to .. it don't work! )
You may need to wait until Sat.
Get in a big supply of home videos or something and try and starve off your addiction.

Airport Extreme 6th generation and Time Warner, Arris modem - no internet on mac

After installing a new Time Warner Arris modem we have encountered the following issues:
Light is green on the airport and everything appears normal
Wifi only works on iPhones, roku, and windows laptops.
Ethernet from airport extreme is also working (xbox one works fine).
Wifi internet does NOT work on Mac computers (we have two in the house both running Yosemite). The light on the airport is green and the macs can connect to wifi but cannot connect to the internet (DNS issue?).
The wifi on my mac yosemite laptop does work on my office wireless and anywhere else but home.
Backstory:
So a few months ago I purchased a brand new 6th generation Airport Extreme 802.11ac. It worked fine with our old generic Time Warner cable modem until we forced to upgrade to a new Arris modem/router combination this weekend to upgrade our internet speeds (I don't recall the model I can get this later). We told TWC that we did not need a router and would prefer to use the Apple router but they said it would work just as before by just plugging it into the ethernet port.
Initially we had network errors and I had to change from NAT to Bridge mode on the airport extreme and this worked for about a day. The next morning I could only get internet and wifi on my iPhone or a windows machine elsewhere in the house.
What I tried (none of these worked):
resetting the router and modem worked briefly but the problem repeated itself a few hours later or after connecting to a different wireless network.
deleting network config files (http://osxdaily.com/2014/10/25/fix-wi-fi-problems-os-x-yosemite/).
deleting the wireless network from saved networks and connecting again.
Again this is a problem with mac laptops ONLY. I have no machines running an older version of OS X so I can't test that easily (I can borrow one from a friend to rule that out). We have 2 Mac computers both running yosemite and both have the same problem. Every other wireless device in the house works like a charm. Any ideas?

(using a White, new Surfboard 6141 and Time Warner as provider)
This is a simple cable modem, that will deliver only one IP address to the AirPort Extreme.
My apple extreme in set in Bridge,(by default it is a 2007 model. Has never been a problem when I used Verizon.
Bridge Mode is not the correct setting for the AirPort Extreme. It needs to be in a Router Mode of DHCP and NAT.
Bridge Mode would have been the correct setting with a Verizon modem/router......but the SB6141 is not a router....it is a simple modem.
You can try to make the settings change to see if that will work, but in most cases when you are making a modem change on a network, it is recommended to first reset the AirPort Extreme back to factory default settings (to wipe older and possibly conflicting settings), and then configure the AirPort to work with the new modem.

Bridging network with AP Extreme base station and AP Express

OK, here's the deal. I have an Airport Extreme Base Station on a WPA2 Personal network. Works great except that I want to boost the signal to the rest of the house. So, I bought an Airport Express. Airport Utility picks up both devices; but when I select the new Express to configure it, I get a msg asking to confirm that I want to switch networks. Well, I don't. I want to expand the network I have. Last night I did click "yes" and it was a disaster as I lost the Extreme altogether and the Express couldn't pick up a signal because - obviously - it wasn't connected to the ethernet cable as the base station, and also because (I think) the base station is configured to hide my SSID. I ended up working backwards and got the Extreme back to normal and put the Express back in its box until someone can tell me how to do this. I know Apple says it's easy; but it's a challenge for me. HELP!

A few things:
1. Please don't configure your base station to "hide its SSID". Doing this is absolutely useless as a security method. It will on the other hand complicate setup of your network, as well as the diagnosis of problems when they arise.
2. You must allow the Airport Utility to switch networks during the process. What is happening is that the Airport Utility must temporarily switch your Mac's wireless network connection from your existing base station to the wireless network created by your unconfigured Airport Express in order to communicate with and configure that Airport Express. After the Airport Express configuration is complete - if your Mac doesn't automatically switch your Mac's wireless network connection back again then just do so manually from the MacOS Airport menu.
3. To get a better understanding of what you are doing, start reading at page 42 of Apple's manual "Designing Airport Networks" found at:
http://manuals.info.apple.com/en/DesigningAirPort_Networks_Using_AirPortUtility.pdf

Airport Express and Time Capsule

Hi
I am attempting to create the following setup and would like advice as to the best way to go about it:
In my house I have a Time Capsule connected to an incoming internet connection (from a cable modem) creating a WiFi network
I have a 'home office' at the end of the garden and have taken one ethernet output from the back of the TC and extended that to the office using a couple of TP Link Powerline adapters
The intention is to connect an Airport Express in the office connected to the TP Link adapter to create a WiFi network for the office
How should I set up the TC and AE to make this work? I have tried a few things using Airport Utility but no joy yet!
Many thanks in advance
PS Wasn't sure whether to post this here or in the AE discussion group so I have copied it there also.

First, please verify that the powerline adapters are functioning correctly by temporarily turning off the wireless on a computer and moving it to the office. Connect the computer to the Ethernet cable attached to the powerline adapter at that location.
See if you can get a good Internet connection that way. If you can, you know the powerline adapters are working correctly and the chances of an AirPort Express also working in the office improve.
Post back to confirm and we will continue with a detailed step by step setup of the AirPort Express.

Airport Express and Time capsule - using to stream music

I just bought Time Capsule to replace my Airport Express. The wireless connection and internet hook-up work seamlessly. I was told, and read, that I can use my Airport Express to connect to my stereo and stream music from Itunes. I have followed the directions (which say you do not need a hook-up to the modem) and I get nothing but a flashing amber light. I've opened Airport Utility and it does not see the Airport Express. I cannot figure out how to make this connection and get it to work. Has anyone done this and if so how.
Thanks in advance for the help.
PS. The stereo equipment and the Airport Express are located about 20 feet from the Time Capsule. I get reception thru the house and my IPhone picks up the network without a problem. I've moved the Airport Express adjacent to the Time Capsule and still nothing but a blinking amber light. The Apple literature says this is possible, but I'm doubting it right now.

Have you performed a Factory Default Reset so that the Express can be reconfigured?
If not, pull the Express from power
Hold in the reset button and keep holding it in as you plug the Express back in to power
Release the reset button after 8-10 seconds
If AirPort Utility is having trouble finding the Express, temporarily connect an ethernet cable from your computer to the Express. Open AirPort Utility again to see if that helps.
For AirTunes, you will configure the Express to "Join" your wireless network. The guided setup should help with this.
Please post back on your progress.

Airport Express and Time Capsule-setting up manually worked

I tried to add my Airport Express to my existing Time Capsule network (for printing and music) using the Airport Utility setup assistant, but could not make it work. I see many posts here that seem to have similar problems. I got it to work by setting up the Airport Express manually according to the instructions in this Apple support document (http://support.apple.com/kb/HT1731) called AirPort Express: How to join an existing wireless network in client mode. I can't say exactly what made it work, but a key seems to be following "Step 2. On your computer, join the wireless network created by AirPort Express" so that you're working directly with the Airport Express.

Hi Yoreilly:
i'm not sure just what setup is right for you. and i'm sure the newer Airport Express is way improved over mine (got mine few yrs ago). but my Airport express works as extension from your Time Cap Wi-Fi. Airport does not put out wireless Wi-Fi signal on it's own.
1> if yours can take your phone line & send out Wi-fi signal on it's own, then more power to you/ & you could sell back your Time Cap & just have a WD backup drive, or seagate external drive for less.
2> otherwise, your airport express needs to connect to your Time Cap, to answer you #2.
3> usually the application helps where you have dead spots in your house, or your location of Time Cap can't reach places in your house where U need Wi-Fi signal, or where you can't thread an ethernet cable out to your printer or device.
not sure how you are setup with your wireless printer now. but if your setup allows you to print by only using the Airport Exp, sure you can use the TimeCap separately as it's own Back-up drive. the thing is it has Wi-fi capability that you wouldn't be using with that setup.
hope this helps, & didn't confuse,
m

Network with Airport Extreme, Airport Express and Time Capsule

Similar Messages

Maybe you are looking for