Networked Printer doesn't see my Mac, Running OS 10.8.2

My Envy Printer 411d all-in-one doesn't "see" my laptop (macbook pro 2012). I can print from the computer to the printer, but scanning in either direction, from the printer to the computer and vice versa is not possible. I get an error message - communications error.
The scan function shows my spouse's computer, but not mine (we both are running Mac OS 10.8.2 on MacBook Pro laptops.)
This has happened before and the only way around it, for me, was to take several hours to re-install the printer software. When you do that, HP treats you like an altogether new customer and requests re-registration and all that. We are already registered, however.
So please advise me me, I would like to know about an easier way to get the functionality I expect from this device.
Thank you.
Best,
Anne Mowat
[email protected]
This question was solved.
View Solution.

It could indeed be your router and using WEP security. WEP is not actually security as it can be broken with freeware in a few minutes.
Switch your router security to WPA with a password that you create. While you are in there, change the channel to 11 on the router's 2.4GHz mode.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Where can I find a print driver for my e-mac running os9.2

Where can I find a print driver for my e-mac running os9.2

Actually the best place is the web site for the printer. You'll also need the model, but there are still some OS9 drivers out there.
You must supply the printer make and model for people here to help further.

HELP! Network printing and installing HPIJS on iBook running 10.3.9

Hi,
I have a home network built around Time Capsule. I have a secondary router which provides a wireless B/G network.
I have an old iBook running 10.3.9 which connects to the wireless B/G network.
I used to have an old HP PSC 750 connected via USB to the time capsule but it broke so I bought a new HP Photosmart C6380 which is connected via an ethernet cable to the time capsule.
I was able to use open printing drivers to allow the iBook to print to the old printer but I cannot get it to print to the new one.
Everything else on the network can print (including my iPhone).
I went back to open printing (http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs), downloaded what I had to and tried to install it. Everything installs ok on the iBook.
The trouble is I cannot follow the setup instructions - "Printer Setup Utility (Panther), hold down the Option key, and click the Add Printer button in the Print Center toolbar. Within the setup sheet, choose Advanced from the top popup menu; then in the "Device:" popup menu select your printer by name (it should be the last item in the menu list). Finally, select the correct PPD from the model browser and click Add."
The printer shows up when I select rendezvous in the add printer section, but it cannot find the drivers and will not let me select the drivers.
When I follow the above instructions, the printer is not listed.
I have tried using IP printing (no luck), bluetooth printing (nothing), in fact everything from the pull down list.
I am sure I am missing a step somewhere. Should I first install the printer connected directly to the iBook via USB?
If anyone can help, it would be much appreciated.
Thanks
Anthony

Hello Penny
The Leopard Installer DVD is Dual-Layered. For lack of any further information it's possible the original installed Optical Drive on your eMac can't read from Dual-Layered DVDs? Yours may be the Combo Drive instead? Although your model meets the minimum RAM requirements you would benefit greatly if you upgraded to at least 1GB - preferably more. Do you have another Mac or access to someone who has?
HTH?
Tony

Problems printing color on C4780 on Mac running 10.10.3 OS

I had a new C4780 sitting in our closet (unused since we got it free several years ago when buying an iMac) and just hooked it up to my Mac running 10.10.3. I am unable to print in color. It copies in color. When looking on System Preference/Printers and Scanners there are no options for color vs B&W. Similary, when viewing the Details in the dialogue box for printing there are no Color vs B&W options. Any clues?

Hi,Try resetting the printing system as following:*Be aware that resetting the printer system will remove any existing print queue and reset any customized driver settings.
Click the Apple menu, and then click System Preferences .
Select Printers & Scanners.
Right-click (or Ctrl + click) your product in the Printers list in the left panel, and then click Reset printing system .
Click OK to confirm the reset.
Type your user Name and Password .
Click OK . The printing system resets. Next update your system as following to ensure the latest drivers database persists:Ensure the printer is powered on and connected to your Mac or to the same network.
Click the Apple icon, then select About This Mac.
Click on Software Update, then click the top Store menu of the shown window and click on Reload Page.
Be sure to install any available update. Finally go to Printers & Scanners and click the plus sign.Select the listed printer, click the Use drop down menu and select the printer model instead the default AirPrint option. Confirm any prompt and now try printing using the newly created print queue. Please let me know of any problem,Shlomi

Network printer doesn't work any more...

I have a network printer at work (xerox workcentre 7232) , it is on 30.30.30.0 subnet and I am on 172 subnet in my company (and I can't change that). 172 is routed to the the 30 network and I can ping the ip address of the printer. The last time I printed something was at least a month ago or more and I had it setup and it worked just fine with the setup utility in cups (localhost:631). Today I go to print something and gnome 3 tells me it's not connected. I remove it and try to add it again with the same ppd and it just keeps telling me it's not connected. Is there a bug with the newest cups? This printer still works in a windows vm.
sudo cat /var/log/pacman.log | grep cups
[2010-10-17 22:44] installed libcups (1.4.4-1)
[2010-10-17 11:34] upgraded libcups (1.4.4-1 -> 1.4.4-3)
[2010-10-17 11:38] installed libgnomecups (0.2.3-7)
[2010-10-17 11:48] installed lib32-libcups (1.4.4-5)
[2010-10-18 23:26] Running 'pacman -S java-runtime libcups poppler libmythes libmspack libldap lucene sane'
[2010-10-18 23:27] Running 'pacman -S libcups poppler libmythes libmspack libldap lucene sane'
[2010-10-18 23:27] upgraded libcups (1.4.4-3 -> 1.4.4-3)
[2010-10-18 23:34] >>please run /usr/sbin/cups-genppdupdate
[2010-10-18 23:34] >>and restart cups deamon
[2010-10-18 23:35] Running 'pacman -S cups ghostscript'
[2010-10-18 23:35] installed cups (1.4.4-3)
[2010-10-26 16:51] Running 'pacman -S cups'
[2010-11-12 23:48] upgraded libcups (1.4.4-3 -> 1.4.5-1)
[2010-11-12 23:48] upgraded cups (1.4.4-3 -> 1.4.5-1)
[2010-11-12 23:48] upgraded lib32-libcups (1.4.4-5 -> 1.4.5-1)
[2010-12-10 14:13] upgraded libcups (1.4.5-1 -> 1.4.5-2)
[2010-12-10 14:13] upgraded cups (1.4.5-1 -> 1.4.5-2)
[2011-01-15 20:29] upgraded libcups (1.4.5-2 -> 1.4.6-1)
[2011-01-15 20:29] upgraded cups (1.4.5-2 -> 1.4.6-1)
[2011-01-24 09:24] Running 'pacman -S giflib lib32-giflib libpng lib32-libpng libldap lib32-libldap lcms lib32-lcms mpg123 lib32-mpg123 openal lib32-openal jack lib32-jack libcups lib32-libcups gnutls lib32-gnutls v4l-utils lib32-v4l-utils'
[2011-01-24 09:24] upgraded libcups (1.4.6-1 -> 1.4.6-1)
[2011-01-24 09:24] upgraded lib32-libcups (1.4.5-1 -> 1.4.5-1)
[2011-02-04 15:50] installed pycups (1.9.53-1)
[2011-03-02 08:23] upgraded pycups (1.9.53-1 -> 1.9.54-1)
[2011-04-09 16:12] upgraded pycups (1.9.54-1 -> 1.9.55-1)
[2011-05-23 09:08] upgraded libcups (1.4.6-1 -> 1.4.6-2)
[2011-05-23 09:08] upgraded cups (1.4.6-1 -> 1.4.6-2)
[2011-05-23 09:09] installed cups-pk-helper (0.1.2-1)
[2011-05-23 09:10] >>please run /usr/sbin/cups-genppdupdate
[2011-05-23 09:10] >>and restart cups deamon
[2011-05-23 09:13] upgraded libgnomecups (0.2.3-7 -> 0.2.3-8)
[2011-05-23 14:18] removed libgnomecups (0.2.3-8)
[2011-06-06 08:56] upgraded libcups (1.4.6-2 -> 1.4.6-3)
[2011-06-06 08:56] upgraded cups (1.4.6-2 -> 1.4.6-3)
[2011-06-17 19:43] upgraded pycups (1.9.55-1 -> 1.9.57-1)
[2011-06-18 18:59] upgraded libcups (1.4.6-3 -> 1.4.6-4)
[2011-06-18 18:59] upgraded cups (1.4.6-3 -> 1.4.6-4)
[2011-06-18 18:59] upgraded lib32-libcups (1.4.5-1 -> 1.4.5-2)
[2011-07-04 09:18] upgraded libcups (1.4.6-4 -> 1.4.7-1)
[2011-07-04 09:18] upgraded cups (1.4.6-4 -> 1.4.7-1)
[2011-07-12 10:57] Running 'pacman -S cups ghostscript gsfonts'
[2011-07-12 10:59] Running 'pacman -S gutenprint foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters hplip splix ufr2 cups-pdf'
[2011-07-12 10:59] Running 'pacman -S gutenprint foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters hplip splix cups-pdf'
[2011-07-12 11:00] >>please run /usr/sbin/cups-genppdupdate
[2011-07-12 11:00] >>and restart cups deamon
[2011-07-12 11:00] directory. Install this directory to "/usr/share/cups/model/$MANUFACTURER/cms".
[2011-07-12 11:00] To use cups-pdf, restart cups and visit the cups
[2011-07-12 11:00] Note that cups-pdf has a configuration
[2011-07-12 11:00] file in /etc/cups. The default location for
[2011-07-12 11:00] pdf output is /var/spool/cups-pdf/$username.
[2011-07-12 11:00] installed cups-pdf (2.5.1-1)
[2011-07-12 11:17] Running 'pacman -U /tmp/yaourt-tmp-rick/PKGDEST.rsU/cups-xerox-2008.01.21-1-any.pkg.tar.xz'
[2011-07-12 11:17] installed cups-xerox (2008.01.21-1)
[2011-07-12 11:57] Running 'pacman -Rns cups-xerox'
[2011-07-12 11:57] removed cups-xerox (2008.01.21-1)
D [12/Jul/2011:13:25:57 -0400] [Job 36] ATTR: marker-types=toner,toner,toner,toner,wasteToner,unknown,unknown,unknown,unknown,transferUnit,transferUnit,fuser,developer,developer,developer,developer,cleanerUnit,unknown,unknown,unknown,unknown,unknown,unknown,opc
D [12/Jul/2011:13:25:57 -0400] [Job 36] Backend returned status -8 (crashed)
D [12/Jul/2011:13:25:57 -0400] [Job 36] Printer stopped due to backend errors; please consult the error_log file for details.
D [12/Jul/2011:13:25:57 -0400] [Job 36] End of messages
D [12/Jul/2011:13:25:57 -0400] [Job 36] printer-state=5(stopped)
D [12/Jul/2011:13:25:57 -0400] [Job 36] printer-state-message="/usr/lib/cups/backend/lpd failed"
D [12/Jul/2011:13:25:57 -0400] [Job 36] printer-state-reasons=paused
E [12/Jul/2011:13:28:09 -0400] PID 7214 (/usr/lib/cups/backend/lpd) crashed on signal 8!
D [12/Jul/2011:13:28:09 -0400] [Job 37] The following messages were recorded from 13:27:48 to 13:28:09
D [12/Jul/2011:13:28:09 -0400] [Job 37] Adding start banner page "none".
D [12/Jul/2011:13:28:09 -0400] [Job 37] Queued on "Work_Printer" by "rick".
D [12/Jul/2011:13:28:09 -0400] [Job 37] Auto-typing file...
D [12/Jul/2011:13:28:09 -0400] [Job 37] Request file type is application/postscript.
D [12/Jul/2011:13:28:09 -0400] [Job 37] File of type application/postscript queued by "rick".
D [12/Jul/2011:13:28:09 -0400] [Job 37] Adding end banner page "none".
D [12/Jul/2011:13:28:09 -0400] [Job 37] job-sheets=none,none
D [12/Jul/2011:13:28:09 -0400] [Job 37] argv[0]="Work_Printer"
D [12/Jul/2011:13:28:09 -0400] [Job 37] argv[1]="37"
D [12/Jul/2011:13:28:09 -0400] [Job 37] argv[2]="rick"
D [12/Jul/2011:13:28:09 -0400] [Job 37] argv[3]="A9ROkP6wpj"
D [12/Jul/2011:13:28:09 -0400] [Job 37] argv[4]="1"
D [12/Jul/2011:13:28:09 -0400] [Job 37] argv[5]="noCollate Duplex=None finishings=3 InputSlot=Auto JCLBanner Jog=None MediaColor=Unspecified MediaType=SystemDefault number-up=1 OutputBin=Auto PageRegion=Letter PageSize=Letter StapleLocation=None XRBackCoverSheet=None XRCMYKColorSpace=Commercial XRColorCorrection=Auto XRColorMode=Grayscale XREconomode=None noXRFax XRFeedEdge=LongEdge XRFinisher=BClass XRFrontCoverSheet=None noXRHighCapacityFeeder XRImageQuality=Normal XROutputMode=HighSpeed XRPaperTrays=TwoTrays XRSlipSheetPrint=None XRSlipSheetSource=None job-uuid=urn:uuid:06f38ba9-ae47-35c7-6115-4baedd5261af job-originating-host-name=localhost time-at-creation=1310491668 time-at-processing=1310491689"
D [12/Jul/2011:13:28:09 -0400] [Job 37] argv[6]="/var/spool/cups/d00037-001"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[8]="HOME=/var/spool/cups/tmp"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[10]="SERVER_ADMIN=root@stupendousman"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[11]="SOFTWARE=CUPS/1.4.7"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[13]="USER=root"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[16]="IPP_PORT=631"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[17]="CHARSET=utf-8"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[18]="LANG=en_US.UTF-8"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[19]="PPD=/etc/cups/ppd/Work_Printer.ppd"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[20]="RIP_MAX_CACHE=8m"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[21]="CONTENT_TYPE=application/postscript"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[22]="DEVICE_URI=lpd://30.30.30.5/queue"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[23]="PRINTER_INFO=Xerox WorkCentre 7232"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[24]="PRINTER_LOCATION=Stationary room next to kitchen"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[25]="PRINTER=Work_Printer"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[26]="CUPS_FILETYPE=document"
D [12/Jul/2011:13:28:09 -0400] [Job 37] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-postscript"
D [12/Jul/2011:13:28:09 -0400] [Job 37] Started filter /usr/lib/cups/filter/pstops (PID 7213)
D [12/Jul/2011:13:28:09 -0400] [Job 37] Started backend /usr/lib/cups/backend/lpd (PID 7214)
D [12/Jul/2011:13:28:09 -0400] [Job 37] STATE: +connecting-to-device
D [12/Jul/2011:13:28:09 -0400] [Job 37] Looking up "30.30.30.5"...
D [12/Jul/2011:13:28:09 -0400] [Job 37] Copying print data...
D [12/Jul/2011:13:28:09 -0400] [Job 37] Set job-printer-state-message to "Copying print data...", current level=INFO
D [12/Jul/2011:13:28:09 -0400] [Job 37] backendRunLoop(print_fd=-1, device_fd=6, snmp_fd=5, addr=0x7f9dbf837108, use_bc=0, side_cb=0x7f9dbd755370)
D [12/Jul/2011:13:28:09 -0400] [Job 37] Page = 612x792; 12,12 to 600,780
D [12/Jul/2011:13:28:09 -0400] [Job 37] slow_collate=0, slow_duplex=0, slow_order=0
D [12/Jul/2011:13:28:09 -0400] [Job 37] Before copy_comments - %!PS-Adobe-3.1
D [12/Jul/2011:13:28:09 -0400] [Job 37] %!PS-Adobe-3.1
D [12/Jul/2011:13:28:09 -0400] [Job 37] %ADO_DSC_Encoding: MacOS Roman
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%Title: ISSAICPayment.pdf
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%Creator: Adobe Acrobat 9.4.2
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%For: rick
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%CreationDate: 07/12/2011, 01:27:48 PM
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%BoundingBox: 11 15 601 777
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%HiResBoundingBox: 11.6200 15.0376 600.3801 776.9624
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%CropBox: 11.6200 15.0376 600.3801 776.9624
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%LanguageLevel: 3
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%DocumentNeededResources: (atend)
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%DocumentSuppliedResources: (atend)
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%DocumentNeededFeatures: (atend)
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%DocumentSuppliedFeatures: (atend)
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%DocumentData: Clean7Bit
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%PageOrder: Ascend
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%TargetDevice: (Xerox WorkCentre 7232/7242) (3016.103) 6
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%Pages: (atend)
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%DocumentProcessColors: (atend)
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%DocumentCustomColors: (atend)
D [12/Jul/2011:13:28:09 -0400] [Job 37] %%EndComments
D [12/Jul/2011:13:28:09 -0400] [Job 37] Before copy_prolog - %%BeginDefaults
D [12/Jul/2011:13:28:09 -0400] [Job 37] Read 4096 bytes of print data...
D [12/Jul/2011:13:28:09 -0400] [Job 37] hrDeviceDesc="Xerox WorkCentre 7232 v 4. 7. 0 Multifunction System"
D [12/Jul/2011:13:28:09 -0400] [Job 37] prtMarkerColorantValue.1.1 = "black"
D [12/Jul/2011:13:28:09 -0400] [Job 37] prtMarkerColorantValue.1.2 = "yellow"
D [12/Jul/2011:13:28:09 -0400] [Job 37] prtMarkerColorantValue.1.3 = "magenta"
D [12/Jul/2011:13:28:09 -0400] [Job 37] prtMarkerColorantValue.1.4 = "cyan"
D [12/Jul/2011:13:28:09 -0400] [Job 37] ATTR: marker-colors=#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none,#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none
D [12/Jul/2011:13:28:09 -0400] [Job 37] ATTR: marker-names="Black Toner [K] Cartridge","Yellow Toner [Y] Cartridge","Magenta Toner [M] Cartridge","Cyan Toner [C] Cartridge","Waste Bottle","","","","","Bias Transfer Roll","Transfer Belt","Fuser Assembly","Black Developer","Yellow Developer","Magenta Developer","Cyan Developer","Transfer Belt Cleaner","","","","","","","Drum Cartridge"
D [12/Jul/2011:13:28:09 -0400] [Job 37] ATTR: marker-types=toner,toner,toner,toner,wasteToner,unknown,unknown,unknown,unknown,transferUnit,transferUnit,fuser,developer,developer,developer,developer,cleanerUnit,unknown,unknown,unknown,unknown,unknown,unknown,opc
D [12/Jul/2011:13:28:09 -0400] [Job 37] Backend returned status -8 (crashed)
D [12/Jul/2011:13:28:09 -0400] [Job 37] Printer stopped due to backend errors; please consult the error_log file for details.
D [12/Jul/2011:13:28:09 -0400] [Job 37] End of messages
D [12/Jul/2011:13:28:09 -0400] [Job 37] printer-state=5(stopped)
D [12/Jul/2011:13:28:09 -0400] [Job 37] printer-state-message="/usr/lib/cups/backend/lpd failed"
D [12/Jul/2011:13:28:09 -0400] [Job 37] printer-state-reasons=paused
E [12/Jul/2011:13:30:26 -0400] PID 7287 (/usr/lib/cups/backend/lpd) crashed on signal 8!
D [12/Jul/2011:13:30:26 -0400] [Job 37] The following messages were recorded from 13:30:26 to 13:30:26
D [12/Jul/2011:13:30:26 -0400] [Job 37] job-sheets=none,none
D [12/Jul/2011:13:30:26 -0400] [Job 37] argv[0]="Work_Printer"
D [12/Jul/2011:13:30:26 -0400] [Job 37] argv[1]="37"
D [12/Jul/2011:13:30:26 -0400] [Job 37] argv[2]="rick"
D [12/Jul/2011:13:30:26 -0400] [Job 37] argv[3]="A9ROkP6wpj"
D [12/Jul/2011:13:30:26 -0400] [Job 37] argv[4]="1"
D [12/Jul/2011:13:30:26 -0400] [Job 37] argv[5]="noCollate Duplex=None finishings=3 InputSlot=Auto JCLBanner Jog=None MediaColor=Unspecified MediaType=SystemDefault number-up=1 OutputBin=Auto PageRegion=Letter PageSize=Letter StapleLocation=None XRBackCoverSheet=None XRCMYKColorSpace=Commercial XRColorCorrection=Auto XRColorMode=Grayscale XREconomode=None noXRFax XRFeedEdge=LongEdge XRFinisher=BClass XRFrontCoverSheet=None noXRHighCapacityFeeder XRImageQuality=Normal XROutputMode=HighSpeed XRPaperTrays=TwoTrays XRSlipSheetPrint=None XRSlipSheetSource=None job-uuid=urn:uuid:06f38ba9-ae47-35c7-6115-4baedd5261af job-originating-host-name=localhost time-at-creation=1310491668 time-at-processing=1310491826"
D [12/Jul/2011:13:30:26 -0400] [Job 37] argv[6]="/var/spool/cups/d00037-001"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[8]="HOME=/var/spool/cups/tmp"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[10]="SERVER_ADMIN=root@stupendousman"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[11]="SOFTWARE=CUPS/1.4.7"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[13]="USER=root"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[16]="IPP_PORT=631"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[17]="CHARSET=utf-8"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[18]="LANG=en_US.UTF-8"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[19]="PPD=/etc/cups/ppd/Work_Printer.ppd"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[20]="RIP_MAX_CACHE=8m"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[21]="CONTENT_TYPE=application/postscript"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[22]="DEVICE_URI=lpd://30.30.30.5/queue"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[23]="PRINTER_INFO=Xerox WorkCentre 7232"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[24]="PRINTER_LOCATION=Stationary room next to kitchen"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[25]="PRINTER=Work_Printer"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[26]="CUPS_FILETYPE=document"
D [12/Jul/2011:13:30:26 -0400] [Job 37] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-postscript"
D [12/Jul/2011:13:30:26 -0400] [Job 37] Started filter /usr/lib/cups/filter/pstops (PID 7286)
D [12/Jul/2011:13:30:26 -0400] [Job 37] Started backend /usr/lib/cups/backend/lpd (PID 7287)
D [12/Jul/2011:13:30:26 -0400] [Job 37] STATE: +connecting-to-device
D [12/Jul/2011:13:30:26 -0400] [Job 37] Looking up "30.30.30.5"...
D [12/Jul/2011:13:30:26 -0400] [Job 37] Copying print data...
D [12/Jul/2011:13:30:26 -0400] [Job 37] Set job-printer-state-message to "Copying print data...", current level=INFO
D [12/Jul/2011:13:30:26 -0400] [Job 37] backendRunLoop(print_fd=-1, device_fd=6, snmp_fd=5, addr=0x7fb0d34ee108, use_bc=0, side_cb=0x7fb0d19e9370)
D [12/Jul/2011:13:30:26 -0400] [Job 37] Page = 612x792; 12,12 to 600,780
D [12/Jul/2011:13:30:26 -0400] [Job 37] slow_collate=0, slow_duplex=0, slow_order=0
D [12/Jul/2011:13:30:26 -0400] [Job 37] Before copy_comments - %!PS-Adobe-3.1
D [12/Jul/2011:13:30:26 -0400] [Job 37] %!PS-Adobe-3.1
D [12/Jul/2011:13:30:26 -0400] [Job 37] %ADO_DSC_Encoding: MacOS Roman
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%Title: ISSAICPayment.pdf
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%Creator: Adobe Acrobat 9.4.2
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%For: rick
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%CreationDate: 07/12/2011, 01:27:48 PM
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%BoundingBox: 11 15 601 777
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%HiResBoundingBox: 11.6200 15.0376 600.3801 776.9624
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%CropBox: 11.6200 15.0376 600.3801 776.9624
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%LanguageLevel: 3
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%DocumentNeededResources: (atend)
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%DocumentSuppliedResources: (atend)
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%DocumentNeededFeatures: (atend)
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%DocumentSuppliedFeatures: (atend)
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%DocumentData: Clean7Bit
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%PageOrder: Ascend
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%TargetDevice: (Xerox WorkCentre 7232/7242) (3016.103) 6
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%Pages: (atend)
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%DocumentProcessColors: (atend)
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%DocumentCustomColors: (atend)
D [12/Jul/2011:13:30:26 -0400] [Job 37] %%EndComments
D [12/Jul/2011:13:30:26 -0400] [Job 37] Before copy_prolog - %%BeginDefaults
D [12/Jul/2011:13:30:26 -0400] [Job 37] Read 8192 bytes of print data...
D [12/Jul/2011:13:30:26 -0400] [Job 37] hrDeviceDesc="Xerox WorkCentre 7232 v 4. 7. 0 Multifunction System"
D [12/Jul/2011:13:30:26 -0400] [Job 37] prtMarkerColorantValue.1.1 = "black"
D [12/Jul/2011:13:30:26 -0400] [Job 37] prtMarkerColorantValue.1.2 = "yellow"
D [12/Jul/2011:13:30:26 -0400] [Job 37] prtMarkerColorantValue.1.3 = "magenta"
D [12/Jul/2011:13:30:26 -0400] [Job 37] prtMarkerColorantValue.1.4 = "cyan"
D [12/Jul/2011:13:30:26 -0400] [Job 37] ATTR: marker-colors=#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none,#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none
D [12/Jul/2011:13:30:26 -0400] [Job 37] ATTR: marker-names="Black Toner [K] Cartridge","Yellow Toner [Y] Cartridge","Magenta Toner [M] Cartridge","Cyan Toner [C] Cartridge","Waste Bottle","","","","","Bias Transfer Roll","Transfer Belt","Fuser Assembly","Black Developer","Yellow Developer","Magenta Developer","Cyan Developer","Transfer Belt Cleaner","","","","","","","Drum Cartridge"
D [12/Jul/2011:13:30:26 -0400] [Job 37] ATTR: marker-types=toner,toner,toner,toner,wasteToner,unknown,unknown,unknown,unknown,transferUnit,transferUnit,fuser,developer,developer,developer,developer,cleanerUnit,unknown,unknown,unknown,unknown,unknown,unknown,opc
D [12/Jul/2011:13:30:26 -0400] [Job 37] Backend returned status -8 (crashed)
D [12/Jul/2011:13:30:26 -0400] [Job 37] Printer stopped due to backend errors; please consult the error_log file for details.
D [12/Jul/2011:13:30:26 -0400] [Job 37] End of messages
D [12/Jul/2011:13:30:26 -0400] [Job 37] printer-state=5(stopped)
D [12/Jul/2011:13:30:26 -0400] [Job 37] printer-state-message="/usr/lib/cups/backend/lpd failed"
D [12/Jul/2011:13:30:26 -0400] [Job 37] printer-state-reasons=paused
E [12/Jul/2011:16:11:45 -0400] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [12/Jul/2011:16:12:09 -0400] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [12/Jul/2011:16:12:40 -0400] PID 3377 (/usr/lib/cups/backend/lpd) crashed on signal 8!
D [12/Jul/2011:16:12:40 -0400] [Job 38] The following messages were recorded from 16:12:40 to 16:12:40
D [12/Jul/2011:16:12:40 -0400] [Job 38] Adding start banner page "none".
D [12/Jul/2011:16:12:40 -0400] [Job 38] Queued on "Work_Printer" by "root".
D [12/Jul/2011:16:12:40 -0400] [Job 38] File of type application/vnd.cups-command queued by "root".
D [12/Jul/2011:16:12:40 -0400] [Job 38] Adding end banner page "none".
D [12/Jul/2011:16:12:40 -0400] [Job 38] job-sheets=none,none
D [12/Jul/2011:16:12:40 -0400] [Job 38] argv[0]="Work_Printer"
D [12/Jul/2011:16:12:40 -0400] [Job 38] argv[1]="38"
D [12/Jul/2011:16:12:40 -0400] [Job 38] argv[2]="root"
D [12/Jul/2011:16:12:40 -0400] [Job 38] argv[3]="Set Default Options"
D [12/Jul/2011:16:12:40 -0400] [Job 38] argv[4]="1"
D [12/Jul/2011:16:12:40 -0400] [Job 38] argv[5]="job-uuid=urn:uuid:13f3341b-ff43-384c-74aa-ef0166af5d27 job-originating-host-name=localhost time-at-creation=1310501560 time-at-processing=1310501560 AP_D_InputSlot="
D [12/Jul/2011:16:12:40 -0400] [Job 38] argv[6]="/var/spool/cups/d00038-001"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[8]="HOME=/var/spool/cups/tmp"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[10]="SERVER_ADMIN=root@stupendousman"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[11]="SOFTWARE=CUPS/1.4.7"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[13]="USER=root"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[16]="IPP_PORT=631"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[17]="CHARSET=utf-8"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[18]="LANG=en_US.UTF-8"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[19]="PPD=/etc/cups/ppd/Work_Printer.ppd"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[20]="RIP_MAX_CACHE=8m"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[21]="CONTENT_TYPE=application/vnd.cups-command"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[22]="DEVICE_URI=lpd://30.30.30.5/PASSTHRU"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[23]="PRINTER_INFO=Xerox 7232"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[24]="PRINTER_LOCATION=Stationary room next to kitchen"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[25]="PRINTER=Work_Printer"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[26]="CUPS_FILETYPE=document"
D [12/Jul/2011:16:12:40 -0400] [Job 38] envp[27]="FINAL_CONTENT_TYPE=printer/Work_Printer"
D [12/Jul/2011:16:12:40 -0400] [Job 38] Started filter /usr/lib/cups/filter/commandtops (PID 3376)
D [12/Jul/2011:16:12:40 -0400] [Job 38] Started backend /usr/lib/cups/backend/lpd (PID 3377)
D [12/Jul/2011:16:12:40 -0400] [Job 38] STATE: +connecting-to-device
D [12/Jul/2011:16:12:40 -0400] [Job 38] Looking up "30.30.30.5"...
D [12/Jul/2011:16:12:40 -0400] [Job 38] Copying print data...
D [12/Jul/2011:16:12:40 -0400] [Job 38] Set job-printer-state-message to "Copying print data...", current level=INFO
D [12/Jul/2011:16:12:40 -0400] [Job 38] backendRunLoop(print_fd=-1, device_fd=6, snmp_fd=5, addr=0x7f00a4f86108, use_bc=0, side_cb=0x7f00a3ed9370)
D [12/Jul/2011:16:12:40 -0400] [Job 38] Unable to auto-configure PostScript Printer - no bidirectional I/O available!
D [12/Jul/2011:16:12:40 -0400] [Job 38] STATE: +connecting-to-device
D [12/Jul/2011:16:12:40 -0400] [Job 38] Looking up "30.30.30.5"...
D [12/Jul/2011:16:12:40 -0400] [Job 38] Connecting to 30.30.30.5:515 for printer PASSTHRU
D [12/Jul/2011:16:12:40 -0400] [Job 38] Connecting to printer...
D [12/Jul/2011:16:12:40 -0400] [Job 38] Set job-printer-state-message to "Connecting to printer...", current level=INFO
D [12/Jul/2011:16:12:40 -0400] [Job 38] STATE: -connecting-to-device
D [12/Jul/2011:16:12:40 -0400] [Job 38] Connected to printer...
D [12/Jul/2011:16:12:40 -0400] [Job 38] Set job-printer-state-message to "Connected to printer...", current level=INFO
D [12/Jul/2011:16:12:40 -0400] [Job 38] Connected to 30.30.30.5:515 (IPv4) (local port 1023)...
D [12/Jul/2011:16:12:40 -0400] [Job 38] hrDeviceDesc="Xerox WorkCentre 7232 v 4. 7. 0 Multifunction System"
D [12/Jul/2011:16:12:40 -0400] [Job 38] prtMarkerColorantValue.1.1 = "black"
D [12/Jul/2011:16:12:40 -0400] [Job 38] prtMarkerColorantValue.1.2 = "yellow"
D [12/Jul/2011:16:12:40 -0400] [Job 38] prtMarkerColorantValue.1.3 = "magenta"
D [12/Jul/2011:16:12:40 -0400] [Job 38] prtMarkerColorantValue.1.4 = "cyan"
D [12/Jul/2011:16:12:40 -0400] [Job 38] ATTR: marker-colors=#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none,#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none
D [12/Jul/2011:16:12:40 -0400] [Job 38] ATTR: marker-names="Black Toner [K] Cartridge","Yellow Toner [Y] Cartridge","Magenta Toner [M] Cartridge","Cyan Toner [C] Cartridge","Waste Bottle","","","","","Bias Transfer Roll","Transfer Belt","Fuser Assembly","Black Developer","Yellow Developer","Magenta Developer","Cyan Developer","Transfer Belt Cleaner","","","","","","","Drum Cartridge"
D [12/Jul/2011:16:12:40 -0400] [Job 38] ATTR: marker-types=toner,toner,toner,toner,wasteToner,unknown,unknown,unknown,unknown,transferUnit,transferUnit,fuser,developer,developer,developer,developer,cleanerUnit,unknown,unknown,unknown,unknown,unknown,unknown,opc
D [12/Jul/2011:16:12:40 -0400] [Job 38] Backend returned status -8 (crashed)
D [12/Jul/2011:16:12:40 -0400] [Job 38] Printer stopped due to backend errors; please consult the error_log file for details.
D [12/Jul/2011:16:12:40 -0400] [Job 38] End of messages
D [12/Jul/2011:16:12:40 -0400] [Job 38] printer-state=5(stopped)
D [12/Jul/2011:16:12:40 -0400] [Job 38] printer-state-message="/usr/lib/cups/backend/lpd failed"
D [12/Jul/2011:16:12:40 -0400] [Job 38] printer-state-reasons=paused
E [12/Jul/2011:16:12:54 -0400] PID 3381 (/usr/lib/cups/backend/lpd) crashed on signal 8!
D [12/Jul/2011:16:12:54 -0400] [Job 38] The following messages were recorded from 16:12:54 to 16:12:54
D [12/Jul/2011:16:12:54 -0400] [Job 38] job-sheets=none,none
D [12/Jul/2011:16:12:54 -0400] [Job 38] argv[0]="Work_Printer"
D [12/Jul/2011:16:12:54 -0400] [Job 38] argv[1]="38"
D [12/Jul/2011:16:12:54 -0400] [Job 38] argv[2]="root"
D [12/Jul/2011:16:12:54 -0400] [Job 38] argv[3]="Set Default Options"
D [12/Jul/2011:16:12:54 -0400] [Job 38] argv[4]="1"
D [12/Jul/2011:16:12:54 -0400] [Job 38] argv[5]="job-uuid=urn:uuid:13f3341b-ff43-384c-74aa-ef0166af5d27 job-originating-host-name=localhost time-at-creation=1310501560 time-at-processing=1310501574 AP_D_InputSlot="
D [12/Jul/2011:16:12:54 -0400] [Job 38] argv[6]="/var/spool/cups/d00038-001"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[8]="HOME=/var/spool/cups/tmp"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[10]="SERVER_ADMIN=root@stupendousman"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[11]="SOFTWARE=CUPS/1.4.7"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[13]="USER=root"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[16]="IPP_PORT=631"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[17]="CHARSET=utf-8"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[18]="LANG=en_US.UTF-8"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[19]="PPD=/etc/cups/ppd/Work_Printer.ppd"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[20]="RIP_MAX_CACHE=8m"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[21]="CONTENT_TYPE=application/vnd.cups-command"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[22]="DEVICE_URI=lpd://30.30.30.5/PASSTHRU"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[23]="PRINTER_INFO=Xerox 7232"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[24]="PRINTER_LOCATION=Stationary room next to kitchen"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[25]="PRINTER=Work_Printer"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[26]="CUPS_FILETYPE=document"
D [12/Jul/2011:16:12:54 -0400] [Job 38] envp[27]="FINAL_CONTENT_TYPE=printer/Work_Printer"
D [12/Jul/2011:16:12:54 -0400] [Job 38] Started filter /usr/lib/cups/filter/commandtops (PID 3380)
D [12/Jul/2011:16:12:54 -0400] [Job 38] Started backend /usr/lib/cups/backend/lpd (PID 3381)
D [12/Jul/2011:16:12:54 -0400] [Job 38] STATE: +connecting-to-device
D [12/Jul/2011:16:12:54 -0400] [Job 38] Looking up "30.30.30.5"...
D [12/Jul/2011:16:12:54 -0400] [Job 38] Copying print data...
D [12/Jul/2011:16:12:54 -0400] [Job 38] Set job-printer-state-message to "Copying print data...", current level=INFO
D [12/Jul/2011:16:12:54 -0400] [Job 38] backendRunLoop(print_fd=-1, device_fd=6, snmp_fd=5, addr=0x7f1d60aa5108, use_bc=0, side_cb=0x7f1d5f17c370)
D [12/Jul/2011:16:12:54 -0400] [Job 38] Unable to auto-configure PostScript Printer - no bidirectional I/O available!
D [12/Jul/2011:16:12:54 -0400] [Job 38] STATE: +connecting-to-device
D [12/Jul/2011:16:12:54 -0400] [Job 38] Looking up "30.30.30.5"...
D [12/Jul/2011:16:12:54 -0400] [Job 38] Connecting to 30.30.30.5:515 for printer PASSTHRU
D [12/Jul/2011:16:12:54 -0400] [Job 38] Connecting to printer...
D [12/Jul/2011:16:12:54 -0400] [Job 38] Set job-printer-state-message to "Connecting to printer...", current level=INFO
D [12/Jul/2011:16:12:54 -0400] [Job 38] STATE: -connecting-to-device
D [12/Jul/2011:16:12:54 -0400] [Job 38] Connected to printer...
D [12/Jul/2011:16:12:54 -0400] [Job 38] Set job-printer-state-message to "Connected to printer...", current level=INFO
D [12/Jul/2011:16:12:54 -0400] [Job 38] Connected to 30.30.30.5:515 (IPv4) (local port 1022)...
D [12/Jul/2011:16:12:54 -0400] [Job 38] hrDeviceDesc="Xerox WorkCentre 7232 v 4. 7. 0 Multifunction System"
D [12/Jul/2011:16:12:54 -0400] [Job 38] prtMarkerColorantValue.1.1 = "black"
D [12/Jul/2011:16:12:54 -0400] [Job 38] prtMarkerColorantValue.1.2 = "yellow"
D [12/Jul/2011:16:12:54 -0400] [Job 38] prtMarkerColorantValue.1.3 = "magenta"
D [12/Jul/2011:16:12:54 -0400] [Job 38] prtMarkerColorantValue.1.4 = "cyan"
D [12/Jul/2011:16:12:54 -0400] [Job 38] ATTR: marker-colors=#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none,#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none
D [12/Jul/2011:16:12:54 -0400] [Job 38] ATTR: marker-names="Black Toner [K] Cartridge","Yellow Toner [Y] Cartridge","Magenta Toner [M] Cartridge","Cyan Toner [C] Cartridge","Waste Bottle","","","","","Bias Transfer Roll","Transfer Belt","Fuser Assembly","Black Developer","Yellow Developer","Magenta Developer","Cyan Developer","Transfer Belt Cleaner","","","","","","","Drum Cartridge"
D [12/Jul/2011:16:12:54 -0400] [Job 38] ATTR: marker-types=toner,toner,toner,toner,wasteToner,unknown,unknown,unknown,unknown,transferUnit,transferUnit,fuser,developer,developer,developer,developer,cleanerUnit,unknown,unknown,unknown,unknown,unknown,unknown,opc
D [12/Jul/2011:16:12:54 -0400] [Job 38] Backend returned status -8 (crashed)
D [12/Jul/2011:16:12:54 -0400] [Job 38] Printer stopped due to backend errors; please consult the error_log file for details.
D [12/Jul/2011:16:12:54 -0400] [Job 38] End of messages
D [12/Jul/2011:16:12:54 -0400] [Job 38] printer-state=5(stopped)
D [12/Jul/2011:16:12:54 -0400] [Job 38] printer-state-message="/usr/lib/cups/backend/lpd failed"
D [12/Jul/2011:16:12:54 -0400] [Job 38] printer-state-reasons=paused
E [12/Jul/2011:16:13:09 -0400] PID 3385 (/usr/lib/cups/backend/lpd) crashed on signal 8!
D [12/Jul/2011:16:13:09 -0400] [Job 38] The following messages were recorded from 16:13:09 to 16:13:09
D [12/Jul/2011:16:13:09 -0400] [Job 38] job-sheets=none,none
D [12/Jul/2011:16:13:09 -0400] [Job 38] argv[0]="Work_Printer"
D [12/Jul/2011:16:13:09 -0400] [Job 38] argv[1]="38"
D [12/Jul/2011:16:13:09 -0400] [Job 38] argv[2]="root"
D [12/Jul/2011:16:13:09 -0400] [Job 38] argv[3]="Set Default Options"
D [12/Jul/2011:16:13:09 -0400] [Job 38] argv[4]="1"
D [12/Jul/2011:16:13:09 -0400] [Job 38] argv[5]="job-uuid=urn:uuid:13f3341b-ff43-384c-74aa-ef0166af5d27 job-originating-host-name=localhost time-at-creation=1310501560 time-at-processing=1310501589 AP_D_InputSlot="
D [12/Jul/2011:16:13:09 -0400] [Job 38] argv[6]="/var/spool/cups/d00038-001"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[8]="HOME=/var/spool/cups/tmp"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[10]="SERVER_ADMIN=root@stupendousman"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[11]="SOFTWARE=CUPS/1.4.7"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[13]="USER=root"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[16]="IPP_PORT=631"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[17]="CHARSET=utf-8"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[18]="LANG=en_US.UTF-8"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[19]="PPD=/etc/cups/ppd/Work_Printer.ppd"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[20]="RIP_MAX_CACHE=8m"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[21]="CONTENT_TYPE=application/vnd.cups-command"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[22]="DEVICE_URI=lpd://30.30.30.5/PASSTHRU"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[23]="PRINTER_INFO=Xerox 7232"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[24]="PRINTER_LOCATION=Stationary room next to kitchen"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[25]="PRINTER=Work_Printer"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[26]="CUPS_FILETYPE=document"
D [12/Jul/2011:16:13:09 -0400] [Job 38] envp[27]="FINAL_CONTENT_TYPE=printer/Work_Printer"
D [12/Jul/2011:16:13:09 -0400] [Job 38] Started filter /usr/lib/cups/filter/commandtops (PID 3384)
D [12/Jul/2011:16:13:09 -0400] [Job 38] Started backend /usr/lib/cups/backend/lpd (PID 3385)
D [12/Jul/2011:16:13:09 -0400] [Job 38] STATE: +connecting-to-device
D [12/Jul/2011:16:13:09 -0400] [Job 38] Looking up "30.30.30.5"...
D [12/Jul/2011:16:13:09 -0400] [Job 38] Copying print data...
D [12/Jul/2011:16:13:09 -0400] [Job 38] Set job-printer-state-message to "Copying print data...", current level=INFO
D [12/Jul/2011:16:13:09 -0400] [Job 38] backendRunLoop(print_fd=-1, device_fd=6, snmp_fd=5, addr=0x7f77b4cea108, use_bc=0, side_cb=0x7f77b2edc370)
D [12/Jul/2011:16:13:09 -0400] [Job 38] Unable to auto-configure PostScript Printer - no bidirectional I/O available!
D [12/Jul/2011:16:13:09 -0400] [Job 38] STATE: +connecting-to-device
D [12/Jul/2011:16:13:09 -0400] [Job 38] Looking up "30.30.30.5"...
D [12/Jul/2011:16:13:09 -0400] [Job 38] Connecting to 30.30.30.5:515 for printer PASSTHRU
D [12/Jul/2011:16:13:09 -0400] [Job 38] Connecting to printer...
D [12/Jul/2011:16:13:09 -0400] [Job 38] Set job-printer-state-message to "Connecting to printer...", current level=INFO
D [12/Jul/2011:16:13:09 -0400] [Job 38] STATE: -connecting-to-device
D [12/Jul/2011:16:13:09 -0400] [Job 38] Connected to printer...
D [12/Jul/2011:16:13:09 -0400] [Job 38] Set job-printer-state-message to "Connected to printer...", current level=INFO
D [12/Jul/2011:16:13:09 -0400] [Job 38] Connected to 30.30.30.5:515 (IPv4) (local port 1021)...
D [12/Jul/2011:16:13:09 -0400] [Job 38] hrDeviceDesc="Xerox WorkCentre 7232 v 4. 7. 0 Multifunction System"
D [12/Jul/2011:16:13:09 -0400] [Job 38] prtMarkerColorantValue.1.1 = "black"
D [12/Jul/2011:16:13:09 -0400] [Job 38] prtMarkerColorantValue.1.2 = "yellow"
D [12/Jul/2011:16:13:09 -0400] [Job 38] prtMarkerColorantValue.1.3 = "magenta"
D [12/Jul/2011:16:13:09 -0400] [Job 38] prtMarkerColorantValue.1.4 = "cyan"
D [12/Jul/2011:16:13:09 -0400] [Job 38] ATTR: marker-colors=#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none,#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none
D [12/Jul/2011:16:13:09 -0400] [Job 38] ATTR: marker-names="Black Toner [K] Cartridge","Yellow Toner [Y] Cartridge","Magenta Toner [M] Cartridge","Cyan Toner [C] Cartridge","Waste Bottle","","","","","Bias Transfer Roll","Transfer Belt","Fuser Assembly","Black Developer","Yellow Developer","Magenta Developer","Cyan Developer","Transfer Belt Cleaner","","","","","","","Drum Cartridge"
D [12/Jul/2011:16:13:09 -0400] [Job 38] ATTR: marker-types=toner,toner,toner,toner,wasteToner,unknown,unknown,unknown,unknown,transferUnit,transferUnit,fuser,developer,developer,developer,developer,cleanerUnit,unknown,unknown,unknown,unknown,unknown,unknown,opc
D [12/Jul/2011:16:13:09 -0400] [Job 38] Backend returned status -8 (crashed)
D [12/Jul/2011:16:13:09 -0400] [Job 38] Printer stopped due to backend errors; please consult the error_log file for details.
D [12/Jul/2011:16:13:09 -0400] [Job 38] End of messages
D [12/Jul/2011:16:13:09 -0400] [Job 38] printer-state=5(stopped)
D [12/Jul/2011:16:13:09 -0400] [Job 38] printer-state-message="/usr/lib/cups/backend/lpd failed"
D [12/Jul/2011:16:13:09 -0400] [Job 38] printer-state-reasons=paused
sudo cat /etc/cups/printers.conf
# Printer configuration file for CUPS v1.4.7
# Written by cupsd on 2011-07-12 16:52
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer Work_Printer>
Info Xerox 7232
Location Stationary room next to kitchen
MakeModel Xerox WorkCentre 7232/7242
DeviceURI lpd://30.30.30.5/PASSTHRU
State Stopped
StateMessage /usr/lib/cups/backend/lpd failed
StateTime 1310503937
Reason paused
Type 8433916
Filter application/vnd.cups-raw 0 -
Filter application/vnd.cups-command 0 commandtops
Filter application/vnd.cups-postscript 0 -
Accepting Yes
Shared No
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
Attribute marker-colors \#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none,#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none,none,none,none,none,none
Attribute marker-names Black Toner [K] Cartridge,Yellow Toner [Y] Cartridge,Magenta Toner [M] Cartridge,Cyan Toner [C] Cartridge,Waste Bottle,,,,,Bias Transfer Roll,Transfer Belt,Fuser Assembly,Black Developer,Yellow Developer,Magenta Developer,Cyan Developer,Transfer Belt Cleaner,,,,,,,Drum Cartridge
Attribute marker-types toner,toner,toner,toner,wasteToner,unknown,unknown,unknown,unknown,transferUnit,transferUnit,fuser,developer,developer,developer,developer,cleanerUnit,unknown,unknown,unknown,unknown,unknown,unknown,opc
Attribute marker-change-time 1310503937
</Printer>

Hi !
Looking at the patch included upstream (http://www.cups.org/str.php?L3875), it seems like a SNMP issue regarding supplies levels.
As a temporary workaround, you can disable SNMP supplies levels get in your printer PPD file in /etc/cups/ppd/ adding the directive:
*cupsSNMPSupplies: False
Then restart cups, and remember to resume your printer (cups stops it after an error occurr). You can do it from the web interface (http://localhost:631)
Tested on a Debian box with an office network printer. More info on CUPS PPD directives here: http://www.cups.org/documentation.php/spec-ppd.html
Last edited by jackdroido (2011-07-26 14:06:21)

Time Machine doesn't see other macs on network

I'm just setting up Time Machine and the "Choose Backup Disk" doesn't show any options. I can see a clean hard drive through Finder, which I've set up on a Leopard G4 just for this purpose, but it doesn't appear. Do I need to set up anything on the G4 hard drive? Any suggestions, please?

Homeplugs as in Powerline? Yes, it can ABSOLUTELY affect the backup. I believe that many powerline protocols are better at one way transfer than bidirectional. Since I had a powerline set lying around, I attempted to see if I could improve on the wireless access. With the powerline adapters, I could not. I ended up reverting back to a direct ethernet connection to the Time Capsule. Can't beat 1000 Base-T.

Error saving Project 2010 files to network drive - doesn't see network drive

ANSWERED (11 April 2014):
So it seems the resolution to this is to simply create a new share with a different name. I used the existing folder (to retain NTFS permissions) and just select to Add a new Share (applying the same Share permissions as the non working Shares).
Deploying this new Share via Group Policy as a test resulted in staff being able to open files from Windows Search, save files through MS Project and the Share being accessible through browsing SMB.
All problems resolved by using a new share name for the existing folder. Seems to be a corruption in the namespace.
Note: I had previously deleted the share and recreated it. I had removed all NTFS permissions and readded (through both the GUI and icacls). This didn't make a difference.
Only changing the name of the share fixed the problem.
Original Question
Already
posted here... but Microsoft Support has not responded.
It seems some staff on some computers are having problems saving MS Project files to the network. This is only since an upgrade to SBS2011 (from SBS2003). The only difference now, is that network drives are mapped via group policy rather than a 'net
use' script.
This is affecting users on Windows 7 and Windows Server 2008 R2, with either MS Project 2007 or 2010. The users have full change access to the folders and can create new files and modifying existing files, just not a MS Project file. Other file tyes, e.g
Word .docx, Excel .xlsx, Adobe .pdf files, all work fine. These files can be opened, edited and saved normally without problem.
To replicate this:
The user opens an existing file or creates a new file on the network folder (either through Windows Explorer or MS Project). They then click File > Save in MS Project and receive the following error (see pic below):
An interesting symptom of this is that if you select File > Save As in MS Project, the Sae As dialog box doesn't remeber the path location of the network drive. MS Project instead prompts to save the file in the local users documents folder (see pic below):
If they browse back to the original folder where the file was saved and choose to save it there, they are of course, prompted to overwrite the existing file and they can save the file. But the same thing happens every time they open the file.
It seems the problem is that Project isn't seeing the path of the file or that the network drive is attached.
If a user closes the file without saving it, they are prompted to save the file and the prompt shows the drive path:
Do you want to save changes to "N:\... Projects\Active Projects\CC...\F4 Project Plan File\004 Programme\test project file.mpp"?
But choosing to save the file gives them the same result as Save As, they are prompted for a new location as if the original file location doesn't exist.
I have disconnected the mapped drive and connected it again using net use but get the same error.
I have reinstalled MS Project 201, installed Project 2010 SP2 and installed Windows updates and it does the same thing, exactly the same symptoms.
Further, if the user opens a file from the network drive, the file shows in the Project recent files list. If they try to open the file from the recent files list in project they get the following error:
"Project cannot open the file.
-Check that the file name and path are correct.
-Check that the file format is recognized by Project.
Project files saved in a version earlier than Microsoft Project 98 can't be opened...."
This is a test file that I created on the user's computer and network drive, This is being opened with the same version it was created in. If I browse to the folder in Windows Explorer I can open the file. Of course, I then can't save the file (I still get
the original error). I'm logged on with Domain Admin privileges.
I've checked these links from other threads (neither apply to my scenario):
http://support.microsoft.com/kb/983458/en-us|
http://social.technet.microsoft.com/Forums/en-US/excel/thread/2eeea140-7e6c-4cb9-a89b-06d2102bd9f7/
I've downloaded my TechNet version of he software and installed it with Sp2 and Windows updates and it does the same thing. This also happens on the Remote Desktop server (Server 2008 R2) using MS Project 2007.

Case 1
This error message appears when the document is open on two or more computers that are running different operating platforms. For example,
if the document is open on a Macintosh computer and you open it on a second computer running Windows or Windows NT, the error occurs when either user tries to save the document.
This problem stems from a difference between the ways Macintosh OLE and Windows OLE open files. As a result, you cannot save a file on two different operating platforms at the same time.
Case 2
This error occurs in Word 97 for Windows if you save to a MAPROOT type network drive connection on a NetWare server where spaces exist in
the file or folder name.
Case 3
This problem may occur if an anti-virus program running on a network has the ability to scan for macro viruses in documents in shared network
folders.
For example, if you have the following:
a shared folder on a network server
-and-
an anti-virus program is running on the network server that is set to monitor the shared folder,
when you attempt to save a document (across the network) to the shared folder, the anti-virus checker may cause the error to occur.
Case 4
This problem may occur on Novell networks when the AutoRecover files path is either blank or set to a network drive.
According each, please try the following workaround:
WORKAROUND
To work around this problem, use one of the following methods appropriate to your situation.
Case 1
Method 1:
Move the document to your local hard disk for editing. Move it back to the server after you finish.
Method 2:
Save a copy of the
file with a different
file name, and work on the copy, either on your hard disk or on the server.
Case 3
Method 1:
Move the document to your local hard disk for editing. Move it back to the server after you finish.
Method 2:
Do not use spaces in the directory or document names.
Method 3:
Do not use MAPROOT-drive connections. Map your drive connections to the volume-level only.
Case 4
Turn off the anti-virus protection on the network server and then try to
save the document. Contact your anti-virus protection software company for additional details and/or updates to their programs.
Case 5
Set the AutoRecover files path to your local drive. To change the AutoRecover path, use the following steps:
1.
On the Tools menu, click Options.
2.
On the File Locations tab, select AutoRecover files and then click Modify.
3.
Change the Modify Location dialog box to a
folder on your local drive and then click OK.
4.
Click OK to close the Options dialog box.
Hope that helps.
Smith

Can anyone out there, wherever there is, help me with an HP 8620 printer hooking up to a Mac running 10.5.8, can it be done?inter hook up to a Mac running 10.5inter connecting to

I need help connecting an HP Office jet 8620 printer to my MacOS X running 10.5.8, can it be done?

Hello, hp only has drivers for 10.6 & up, about the only thing you can do is see if an earlier OfficeJet driver works.

Elements 10 doesn't see scanner Mac OS 10.9

Photoshop Elements 10 on Mac OS 10.9 doesn't find scanner (no option to get photos from Scanner).
EPSON 4870 Photo
Scanner works fine in other apps (Adobe)
TWAIN plug-in installed
Epson driver (re-)installed / up to date
Any suggestions?
Thanks

Some scanners are not compatible with the 64-bit PSE 12. Epsons have the most problems, unfortunately. There are lots of Epson customers with this problem, but so far I'm not aware of an easy solution.

How can check ip of network printer? how can check MAC address?

hello,
my printer name is,
HP Laserjet 1022n
product no. Q5913A
serial no. VNRT79T074
give me a details of the issue
mittal sagar

Hi,
You may locate both the Mac Address and the IP Address by prinitng a Configuration Page.
You may fnd the steps to print the report listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01125585
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can't print on new epson R3000 printer from PE 11 on Mac running 10.10.1. Spent hour with Epson tech support. worked fine last week with Epson R2880 and same OS.

All drivers were updated. Printing works fine with other software.

Still not printing.
In the meantime have done the following: --
1. Launched terminal, typed sudo chmod a+x /usr/libexec/cups/backend/*, followed with pw when prompted, then quit terminal.
Tested printer: no go. Printer setting shows "In use, last used". Printer dialog says "waiting for printer to become available".
2. Launched terminal, typed ls -l /usr/libexec/cups/backend.
This is the list:
total 2992
lrwxr-xr-x 1 root admin       69 Jan 2 2013 HP-Fax -> /Library/Printers/hp/Fax/HPFaxBackend.app/Contents/MacOS/HPFaxBackend
-rwxr-xr-x 1 root wheel   122384 Jun 8 2011 bluetooth
lrwxr-xr-x 1 root wheel      109 Jan 2 2013 canonijnetwork -> ../../../../Library/Printers/Canon/BJPrinter/Plugins/BJNP/canonijnetwork.bundle /Contents/MacOS/canonijnetwork
-rwx--x--x 1 root wheel    57344 Jul 13 2011 dnssd
-rwxr-xr-x 1 root wheel    63296 Jun 12 19:47 epsonfirewire
lrwxr-xr-x 1 root wheel       68 Jan 2 2013 fax -> ../../../../System/Library/Printers/Libraries/Fax/Contents/MacOS/Fax
lrwxr-xr-x 1 root wheel        3 Jan 2 2013 http -> ipp
-rwx--x--x 1 root wheel   106096 Jul 13 2011 ipp
-rwx--x--x 1 root wheel    93024 Jul 13 2011 lpd
lrwxr-xr-x 1 root wheel        5 Jan 2 2013 mdns -> dnssd
-rwxr-xr-x 1 root wheel    73812 May 6 2008 pdf800
-rwxr-xr-x 1 root wheel    61008 Oct 26 2010 riousbprint
-r-x--x--x 1 root wheel 2796752 Apr 13 2012 smb
-r-xr-xr-x 1 root wheel    66576 Jul 13 2011 snmp
-r-xr-xr-x 1 root wheel    79328 Jul 13 2011 socket
-r-xr-xr-x 1 root wheel    91792 Jul 13 2011 usb
3. Reset printing system.
Tested printer: no go.
In the meantime, the iMac is printing to HP Laserjet 6MP (appletalk connected to iMac's USB).

Mac Doesn't See External Drives on WinPC, PC Doesn't See Mac

I'm trying to transfer some files that are on an external drive connected to a Windows PC to my new Mac Pro.
On the Mac, in Finder, I can see the PC, but I can only see it's internal Hard Drive; the external drive don't show up in Finder.
On the PC, I'm not seeing the Mac Pro at all. In Tiger, it seems to me, there was check box under the "sharing" preferences for "Windows sharing," but I can't find that in Leopard. So, the PC doesn't see the Mac at all.
It does suddenly dawn on me that I could just detach the external drive that I'm trying to copy from the PC and plug it into the Mac, but... that would be too easy. I would still like, at least, to be able to see the Mac from the PC.
Any suggestions?
Thanks,
--PS

My recommendation is to format the drive as FAT32 via OSX's Disk Utility, this will allow you to read/write from both the Mac and PC environment.
Like I said, I don't think that's the issue, because my MacBook shares everything with the PC just fine (except the externals on the PC). And of course, I don't want to reformat the external drives until I've got the data off of them.
I just checked, and Tiger has a "Windows sharing" checkbox under the "Sharing Preferences" that allows the MacBook to show up in "My Network Places" on the PC. The problem I'm having is getting the MacPro to show up on the PC; the Pro has Leopard, and there's no "Windows Sharing" in Leopard that I can see.
Thanks again,
--PS

WES610N Doesn't See 5ghz Network

Hello,
I have two WES610Ns running Firmware Version: 1.0.06 (latest) and they only see 2.4ghz networks. Performing a Wireless Network Site Survey or configuring the network manually doesn't see the 5ghz network. (Other devices are connecting to the router on 5ghz)
The router in question is an Asus RT-N56U running OpenWrt Barrier Breaker 14.07.
I have found a few posts with the same issues, but no solutions. Can anyone point me in the right direction?
Thanks,
John

Hi there, john_p_lynch! It's odd that you have experienced it with the two wireless bridges. Have you tried adjusting your router's wireless channel? I would suggest that you try reflashing the firmware of the wireless brigdes. After that, do a factory reset and reconfigure it. This is to make sure that it doesn't have a corrupted firmware.
It would also help connecting it with another dual band wireless router for further isolation.
Help, learn and share

I can't see other Macs on my network.

I cannot see other Macs running OS X 10.7 (Lion) on my network in the sidebar of the finder. When I had Snow Leopard my friend could see me but I could not see him. I have tried enabling file sharing, but still nothing, and this was not enabled on Snow Leopard anyway. This is really confusing me.
Thank you.

There's a strange Finder bug that is causing things to go invisible, usually it is drives, but occasionally it happens to folders (one guy had his applications folder become invisible). Take a look at this article I wrote on the problem:
http://www.pinkmutant.com/articles/invisible.html
Scroll down to the bottom section for the explanation (and solution) for folders.
Francine
Francine
Schwieder

Best networked printer for a MAC based network?

I may regret asking this :"), but what is the best network printer to use on a MAC based network? I have been the victim on the bloatware HP drivers for years, and am really sick of them. But what do I purge this nightmare for? Canon (like the MX860) looks interesting and is multifunction (a requirement). Lexmark seems to making a comeback, and Brother as well. Epson has seemed to do OK as well. Who has the most reliable drivers for the OSX platform, updates them the most regularly, and seems to actually care about Apple (as opposed to pandering to the Windows crowd almost exclusively).?
Comments?
Dan O

I did my homework for network printer/scanner/fax and came up with the Brother Color Laser MFC-9840 CDW. It's got every button and whistle, and they all work on a Mac or PC network. You can scan from the machine and pick which Mac to send the scan to, or scan from a Mac. Sheet feeder works for fax and scan, real duplex printing. All works on Leopard. They have lower models which will also work, but without the Color, or Wireless (which we don't use).
I've seen great on-going driver development with the latest operating systems...

Networked Printer doesn't see my Mac, Running OS 10.8.2

Similar Messages

Maybe you are looking for