Networking a firewire hard drive from a Mac and access the drive from a PC

I'm trying to network a firewire hard drive from my Mac and access that hard drive from a Windows XP PC. I can see the main internal hard drive but I cannot see the firewire hard drive. Does anybody have a solution or work around?
Many thanks,
Roy

Thanks SO MUCH! Not only does it work, BUT IT IS FREE!!!!
See, I have two firewire (external) HDs, connected to a Mac, connected to a PC, connected to a USB external HD... now I can share files from the USB HD to the firewire HDs!
Gotta love technology!
Matthew

Similar Messages

Installing Mac OS X on an external firewire hard drive.

No matter what I try, I cannot get my Mac mini to boot from the SuperDrive, in order to install the Mac OS X operating system onto my external firewire hard drive...
The Mac mini always recognises the external firewire HD, each time the system boots-up which is good, however it also boots-up from the internal HD, automatically.
Any suggestions ?
I have also noticed that my external firewire HD does not appear as an option as a Startup Disk, under System Preferences...
Regards,
Howard Pew.

I have used Carbon Copy Cloner to copy the Mini's internal HD to the firewire external HD, and now it appers as a Startup Drive under System Preferences...
I have also noticed that I must first turn-on the ext. firewire HD and then after a few seconds turn-on the Mini.
And, yes, I was using the original DVD-ROM System Install Disk that came with the Mini, when I was trying to install Mac OS X onto the ext. firewire HD...
Now, I still cannot get my Mac Mini to boot from the ext. firewire HD, even with a clone copy of the internal HD. I keep selecting it as my Startup Disk under System Preferences and even lock-it, but this does not seem to work.
Now, I use the 'Alt' key (for Windows PC keyboards) which is the 'Option' key for Mac keyboards, when the Mini is booting up. This gives me a choice as to which HD I want to boot from... However, I cannot seem to change this from the default internal HD. It gives me a large arrow to use, in order to change the HD, but I cannot seem to use this large arrow from the keyboard. And the mouse just stays in the top left-hand corner of the screen. I know, if the mouse curser were free, I would be able to change the large arrow and boot from the ext. firewire HD...
Any suggestions ?
Regards,
Howard Pew.

Can PB boot from an External Firewire Hard Drive?

Can I set up an external firewire hard drive as an emergency boot drive, in case my internal drive goes south? Anyone have utility software recommendations for setting up boot drive or mirror drive, in addition to OS X's Disk Utility? Thanks.

Photon2:
Yes, you can set up your external firewire HDD as an emergency boot drive.
Here's what you need to do:
1. Your HDD must be formatted Mac OS Extended (Journaled)
2. (Optional) I suggest you partition your HDD so that the first partition is roughly equivalent to the size of your internal HDD. The rest can be partitioned for other uses. (See Dr. Smoke's FAQ Backup and Recovery) For step-by-step for formatting and partitioning please post back).
3. Use SuperDuper or Carbon Copy Cloner to make a bootable clone of your internal HDD to the external firewire HDD/partition.
Please post back with further questions or comments.
Cheers
cornelius

Accessing external firewire hard drive from Finder

I have a Lacie Porsche 250 GB firewire hard drive. The icon appears on the desktop but when I double click on it to view it's contents the finder 'blinks' and closes all open windows (including the momentarily opened hard drive window).
I can access the drive from within applications (using 'open' command, but never directly from the finder. I have visited the Lacie support site and updated the software, firmware, etc.
Very grateful for any advice on how i can get the hard drive to start behaving.

OK ...
Run MainMenu
And under "Other Tasks" select
"Remove all .DS_Store files" then re Boot

My power mac doesn't recognize my external firewire Hard Drives anymore

I was working with my Power mac as usual, it freeze, after rebooting, any of my firewire hard Drives apears

Hola Alfredo:
En primer lugar, nadie debe estar utilizando la versión 10.4.2 del Sistema Operativo. Actualízalo a 10.4.11 a la brevedad posible. Vas muy atrasado con esa versión tan obsoleta.
Intenta inicializar tu máquina después de haber apagado y encendido de nuevo las unidades de disco duro.
Si no las ve tu Mac en esas circunstancias, pueden haberse dañado, y eso requerirá otras medidas adicionales.
Si tienes DiskWarrior, pruébalo primero. Luego con Disk Utility de Apple.

I'm going to get the I Mac and since the new I Mac doesn't have DVD drive on it I was thinking to get the Samsung SE-506AB Slim Portable Blu-ray Writer in order to burn movies from I movie do I need a special software for that since the SE-506ab comes onl

I’m going to get the I Mac and since the new I Mac doesn’t have DVD drive on it I was thinking to get the Samsung SE-506AB Slim Portable Blu-ray Writer in order to burn movies from I movie do I need a special software for that since the SE-506ab comes only with windows software.. but I did check and it is compatible with apple. Can you please advise me and or let me know if I’m buying the right stuff or if there is any other blu ray that will work with the I mac as plug and play.
Thank you
Haim

This freezing reminds me of really old Macs, long ago, in the days of the old-school peripherals like SCSI drives, terminators, scanners and the like. If you had a SCSI conflict, like the wrong device ID's or something, you'd freeze up like that. Back in those days you'd call 800-SOS-APPLE (AAPL?) and they'd run you through disconnecting all your extra hardware - Jaz and Zip drives, CD burners, scanners etc and then eliminate them one by one by adding them incrementally and testing for the freeze/bomb dialog.
But, today we have Firewire and none of those ancient issues (no free lifetime tech support either). My iMac's ports are all full, and I only know which devices are connected when I have to remove something for another device. iSight, scanner, card reader, external hard drive, USB soundsticks, etc. You wouldn't happen to have any SCSI devices hooked up, would you?
Out of curiosity, have you tried a different USB/Firewire port for the hard drive? Or run the hardware test DVD that comes with your computer? This weird freezing seems to suggest a problem with the computer, RAM or network more than a device. Bad devices, in my experience, cause kernel panics, not freezing.

Large OS 8.6 Compatible Firewire Hard Drive?

I'm needing a larger firewire hard drive, which must able to back up my older Macs (running 9.1 and 8.6)
However the newest 500GB ones all seem to list OS 10.x as their minimum requirement. (Not sure whether this is the minimum for doing stuff like formatting and partitioning, or whether these drives will not mount at all under OS9)
Can anyone suggest a large firewire external drive which will mount and perform backups under OS 8.6 ?

It should look somewhat like this:
xxxx% sudo du -x -h -d 1 /
Password:
24K /.fseventsd
1,9G /.Spotlight-V100
0B /.TemporaryItems
0B /.Trashes
0B /.vol
17G /Applications
9,0M /bin
0B /cores
4,5K /dev
1,2G /Developer
14G /Library
1,0K /net
0B /Network
10,0G /opt
4,4G /private
6,8M /sbin
4,0G /System
157G /Users <------ in this example this folder contains the most GB's
1,7G /usr
4,0K /Volumes
xxxG / <------ xxx GB : this is the total for all folders above.
So the results are presented one folder at a time in alphabetical order (?) with the total at the end.

External Firewire Hard Drive is not recognized

Hello
I have a LaCie External Firewire Hard Drive (like this one (http://www.lacie.com/us/support/support_manifest.htm?id=10105). Since it uses a fireware 400 cable, I bought a FireWire 800-400 adapter, the one from moshi that is sold in the mac store.
I have tried connecting it to both ports in the external harddrive, connecting and disconnecting and still is not recognized. Any idea and suggestions?
I already tried in another computer, with windows xp, and the hard drive works.
Thanks.

Hi, oops, I have more than 1 mac & I apologize for assuming you are a multiple mac owner..
You could visit your local Apple Store or Local Apple Approved Service Agent.
You could try connecting via USB if your external HD has the capability, it could also be a bad cable.
You can check the Finder -> Preferences & the Show These Items..
You can reboot with the Ext HD connected & see if it shows up on your d/top...L

How do I start up an iMac G4 on an external Firewire hard drive using Tige?

How do I start up using Tiger from an external Firewire hard drive? I have a 1 GHz iMac G4 with 768 MB RAM. The hard drive failed last week. I don't want to buy and install a new hard drive for the iMac G4. I have access to an Intel based iBook and a brand new copy of OS X 10.5 (Tiger) which I can use to install the copy of Tiger on an external Firewire hard drive that I have that's not being used. What are the steps for installing Tiger on the external Firewire hard drive and then using that external drive as the startup disk for the iMac G4?

Hi
Attach the external firewire drive to the iBook, launch Disk Utility and erase the drive use Mac OS Extended as the format type. Insert the Installer Disk, restart the iBook and hold down the 'C' key. Progress through the usual setup assistant prompts until you get to the point where you select the destination disk. You should see the external firewire disk. Select this and carry on with the installation. When the install is done, restart the iBook and verify you can boot from the drive. You can proceed with the Setup Assistant and create the default User Admin account if you want, or you can quit, shut down the iBook and disconnect the drive.
Next attach the drive to your iMac, switch on your iMac. The mac should find for itself the first bootable system it 'senses'. It should boot thereafter. You could forego this and simply attach the drive, boot the iMac and hold down the alt key. This should bring up startup disk manager which should show any or all valid bootable systems. Select the one you want and click the right hand arrow.
Tony

Manual unmount Firewire hard drives before shutdown

I'm having shutdown problems again possibly due to my new firewire hard drive, the firewire driver supplied by OS X, or some combination thereof.
The issue is if I don't manually unmount my Firewire hard drive, the MacBook Pro does not ever properly shutdown and just spends its time doing the "spinning sun ray". If I manually unmount the firewire hard drives (by dragging to trash, for example) then there is no shutdown problem. Why should this be a problem at all? I don't understand. Why can't the shutdown command also unmount Firewire hard drives consistently?
My set up:
MacBook Pro <--> LaCie 120Gb firewire <--> Maxtor OneTouch 4 Plus 500GB
I also saw this article:
http://www.fcpworld.com/fcpworld/articles/E14514A0-F957-48E4-835A-81CE505C03D5.h tml
Any times on how to solve this problem so that I can go to the shutdown command without first having to manually unmount the Firewire hard drives? Thanks!

Frank Canzolino wrote:
Thanks for reporting back, the idea was just a theory that I had never tried before. I do know that Macs will have difficulty shutting down if the state of a network is changed during to shutdown, say pulling the ethernet cable. Firewire has been implemented as a network port (actually a while ago).
Yeah, I've known Firewire was implemented as a network port a long time ago. The strange thing is that I'm not using the Firewire port as a network device AND it has also been deactivated. It was deleting the port that seemed to have helped it.

Which external firewire hard drive for protools and imac?

hello group,
i see many posts about external firewire hard drive issues. i would like to purchase a drive of 7200rpm or faster, 200gb or larger for recording with protools into an imac intel duo 2.0. hopefully theres a brand that i can buy that will just work out of the box. i have no mac troubleshooting skills and wish to avoid any compatability complications. is there a general consensus on a no brainer drive for mac newbies? thanks for any advice.
jeff

I highly recommend that Mercury Elite Pro drives from OWC as well. They are very stable and reliable due to their use of the Oxford 911 chipset and not the more common - and more problematic - Prolific chipset. I also use SuperDuper to make fully bootable clones of my internal drive for backing up everything.
If their history for me and others continues with you, there should be absolutely no troubles for you using an OWC drive and Protools.

Eject Firewire Hard Drive, Won't Stop Running

I upgraded my Early 2009 Mac Pro OS to 10.9 today, but I found a problem about my external firewire hard drive.
If I eject firewire hard drive under 10.8, the hard drive will stop running/rotating. Then I unplug the firewire cable. After I upgrade to 10.9 OS, the firewire hard drive will not stop running/rotating after I eject it. I cannot see any external hard drive icon on desktop, but I can hear the hard drive running sound.
I'm not sure if it's safe to unplug cable under running condition after succeful eject. How's many people have the same problem with me?
Thank you!

I have a dozen OWC cases and they have all continued to work (but can't say about 10.9) and they are getting "dated."
Apple though often changes drivers, IOKIt and how external drives are treated, 10.5.0 thru 10.5.2 the rules changed and changed back and forth. Some drives had to be off during startup. Users have had trouble with 10.6 as well with their drives, often USB and/or FW from major vendors (WD etc) not working.
Do either of you get the "drive was not ejected properly" message on the next time you do connect and power it back on or after a restart?
One of the reasons I prefer waiting for the .2 or later releases.

Care and feeding of firewire hard drives

What are people doing to support their firewire hard drives?
Sure firewire is plug and play
but with hard drives if you do not shut down
its plug and pay.
In my case, my computer freezes once a month
for whatever reason
and I have to power it down.
This my firewire HD does not like.
I have not had much success with my HD
(it just got back from the shop)
So do people keep a diskwarrior cd in the slot
to resurrect the volume when it refuses to mount
and wants to be initialized?
How do you keep your firewire HD up and running?
and does diskwarrior cure all disk description ills?

Hi Pat:
Never thought of it as care and feeding.
I use Carbon Copy Cloner to back up my entire HDD to my LaCie FW HDD. It is set up as a boot drive in CCC so I can boot from it if I need to.
I also use Tech Tool Pro regularly. Actually, since I use CCC to do incremental backups TTP is on both HDDs, so I can boot from one HDD and work on the other and vice-versa. Quite a neat arrangement, actually.
I have my LaCie partitioned so that I have my internal HDD on one partition, Previous OS on another and I have my Pismo running Tiger on a third, and a large 4th partition which I recently used to backup my son-in-law's entire iBook HDD as I completely reformatted and re-installed Tiger.
When I am not actively using the LaCie, if I remember, I eject it from the Finder window, and shut it down, so it is not running continuously.
That's enough for now.
Post back with comments or questions.
cornelius
PB G3 Pismo400, 100 GB 5400 Toshiba internal, 1 GB RAM Mac OS X (10.3.9) Beige G3 OS 8.6

How to move iTunes Library/Media Files to external firewire Hard Drive and make it the master library, and then point iTunes to that when adding new content??

How to move iTunes Library/Media Files to external firewire Hard Drive and make it the master library, and then point iTunes to that when adding new content??

Copy your ENTIRE iTunes FOLDER to an External Drive...
Full Details Here > http://support.apple.com/kb/HT1751
To Operate iTunes from the External Drive...
Start iTunes with the Option key held down and guide it to the new location of the library.
Be Sure the drive is Formatted Mac OS Extended (journaled)
Also... have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

SCSI/IDE/Firewire hard drive?

Hi all,
I've got a Power Mac G4 Quicksilver 2002, which has, I think, an ATA/66 bus, Firewire 400 and 64bit PCI slots. How do I find out for sure that the controller can only support up to ATA/66?
I've got a Cheetah U320 SCSI hard drive lying around spare. The boot hard drive I have in the mac right now is an ATA/100 IDE drive connected to the on-board IDE bus. I have a firewire hard drive enclosure.
So, my question is, to speed up the computer in general, should I buy an U320 SCSI controller, which will be expensive, use the SCSI hard drive as boot drive; or put the ATA/100 IDE drive in the firewire enclosure and use that as boot drive; or just leave the current boot drive as it is now?
Thanks very much for your help in advance!
Regards - Piers

In general, Adaptec cards supported in Macs were different from the PC versions, and had "PowerDomain" in their names.
Adaptec has no further interest in the Macintosh market, and dropped most support for Mac SCSI cards in 2002:
"Adaptec is no longer developing SCSI drivers for the Mac OS. Technical support is available for those products still in their complimentary support period; however, there will be no new SCSI drivers, firmware, or patches available."
Adaptec’s Mac OS compliance page

Networking a firewire hard drive from a Mac and access the drive from a PC

Similar Messages

Maybe you are looking for