Networking issues with bridged connection

So in my network I have a netgear C6300 with a Motorola surfboard(modem/router also with dhcp turned off) connected via Ethernet to provide a separate wifi network on the other side of the house. I've been having frequent connection drops that last for about
10 seconds. I figured out my wireless adapter(netgear a6210) is bridged to the Motorola(see screenshot) and I'm wondering how to disable this bridge because I think it might be causing the connection issues. But when I try to remove the bridge is says gives
an error. If I disable the Network bridge my adapter stops working. Any ideas?
Note: before it was saying Motorola... under the enabled, bridged.
Edit:
This: I also noticed it switched from Motorola like the picture below to NETGEAR58-5G(like above)

Hi slycoder127,
If yo uare currently running Windows 10 build 10049, then you should take a look at the thread below:
No access to Internet Protocol (v4 or v6) in 10049
Which might cause some of the adapter function not working at the current build.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Network issue with initial connections on Hyper-V

This is the opposite of all the other networking issues I have seen with Hyper-V- anyone run into this?
I am running Hyper-V on a Server Core installation, and have had the same issue when I used Server 2012R2 as when I used Server 2008R2 on the same server as a virtual host. The server is an HP ProLiant DL360 Gen8 with 2x 8-core processors, 32 GB RAM. The
VM is sized and configured to stay within 1 NUMA node. It uses a single port of the 4-port HP/Broadcom 331 NIC, with all the TCP LSO settings disable at the switch, host, and guest, same with the power management settings. We have ProxyARP on the network,
so I have set the ArpRetryCount key to 0.
I have seen it happening with and without SR-IOV enabled. The guest OS is an RDS server, so for the sake of our CAL's it has to stay at Server 2008R2. I have set up a HOSTS file to mitigate this problem, as it seems to be a DNS issue- Here's what happens:
The first time I visit a resource, the server will timeout. An example not in our HOSTS file does this consistently: If I go to https://mail.mydomain.com/OutlookWebAccess, it spins for a couple of minutes before timing out. I hit refresh and the page loads
immediately. This server is colocated in-house, as is the mailserver. I'd say it is a DNS issue at some level, but I'd like to know what level it is- Is it just timing out trying to cache the DNS request, or is there a performance issue with a DNS server on
the network? (All of our DNS is AD-integrated running on DC's).
Here is where I'm seeing this:
Internet Explorer- described above
Salient Interactive Miner- at the login screen, it searches for a database and times out. If I go to the setup and enter the IP address, it still times out. It will not find the database server until I quit and restart the program. If this is the same issue,
it would obviously not be a DNS problem.
I DON'T see it in GP9 connecting to a datasource
Prior to setting up the HOSTS file, I saw this in Windows Explorer connecting to network shares on the same LAN segment.
This appears to only happen to the Hyper-V guest OS. As a best practice, whenever Windows Update runs, I update the Integration Components.
I have the bindings properly ordered on the guest VM, with the network adapter the goes to the physical NIC first, and IPv4 ordered before IPv6.
All updates are isntalled, and the firmware is at it's latest revision.
Any ideas?

Hi Daniel,
" This appears to only happen to the Hyper-V guest OS. "
Do you mean that any other hosts can access the network resource normally except these VMs ?
If yes , my suggestion is to disable the VMQ on the physical NIC for the VMs , then try test again .
Best Regards
Elton Ji
If it is not the answer please unmark it to continue
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this?

We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this? We're running two Macs wirelessly with no problems. And the Wii did connect before the switch.

Hello and thanks for the reply. I gave this a try, turned off Airport on one of the computers and tried the Wii again. Still no connection. I should say that we're also running an old G4 (wired) off the Airport as well, with no problems. I've tried many things to make the Wii to work, including power cycling the Airport, turning off the security settings in the Airport, resetting the Airport to it's default and redoing the network, resetting the network setting on the Wii (several times), moved the Airport closer to the Wii, all with no luck. The Wii "sees" the Airport but won't connect to it. I'm at a loss for anything else to try, so any help is appreciated.

Issues with WiFi connection to Deskjet 3545

Hi,
I have number of issues with WiFi connection to my new Deskjet 3545 AIO:
1. Printer is not able to get IP address automatically from home WiFi router (all other devices get IP with no problem). Using WPS allow printer to register in network but after switching off, WPS setting is not stored, so I have to do it again. This I was able to solve with manual entering of IP address, netwrok mask, DNS and gateway address.
2. Official HP software installed from HP site was able to find printer for 3dattempt, and it started to work. But after a while, "HP utility" program loose connection to printer, so I can not see any parameters, and I get "can not find printerä message when start to to print. After a some time (minutes to hours), whithout any action from my side, connection to printer seems to be restored, so I can see printer parameters in "HP utility" and printing is started.
3. Official HP software installed from HP site on PC (Windows 7) is not able to find printer on WiFi at all, works only with USB.
All this is disaponinting and unexpected, as my office HP LaserJet Pro 400 Color works perfect.

Hi @DmiBro,
Welcome to the HP Forums!
I see that you are having some wireless issues with your HP Deskjet 3545 to your Mac OS X 10.10 and Windows 7 computers. I am sorry to hear this, but I am happy to help!
I would recommend the following guides:
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute.... (The solutions for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks will work on Mac OS X 10.19 Yosemite.)
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
HP ENVY 4500 and HP Deskjet Ink Advantage 3540 e-All-in-One Printer Series - Printer Does Not Mainta....
Tips for troubleshooting wireless connection issues
The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
Hope this information is helpful, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Issues with my connection when gaming (Insurgency)

Hello,
I just bought the MSI GT72 2QE. I am very pleased with de specs like the Geforce GTX 980m and the i4710hq but there is an issue that is bothering me some days now. When i am playing my beloved game Insurgency, i get ping spikes all the time. So i followed up some instruction on uninstalling the Killer software suite and just installing the drivers when i encountered the next problem. My Killer Wireless-n/a/ac 1525 Wireless Network Adapter couldn't find the drivers in the 'drivers only' package. But i did my best to find other drivers and accomplished after 5 hours full of frustration. So that is done but still doesn't solve my problem.
I don't know what to do anymore and I'm starting to think that maybe my Killer Wireless-n/a/ac 1525 Wireless Network Adapter is the issue. Maybe this is a hardware issue. I contacted the store where i bought it and they will contact me in 48 hours with a possible solution but the guy said that after all my effort it seems like a hardware issue indeed. You guys are my last hope or my laptop will be gone for 3 weeks at the factory.
Video of ping:
nl.tinypic.com/r/ztisd1/8
I hope someone has the solution.
Excuse me for my incorrect English, it's not my native language.
Bye!

Thanks for your reply.
I'm glad (and I'm not glad for the others..) that I'm not the only one. But it's not because there are more devices connected to my router because I am the only one now and I'm still having this problem while my other laptop doesn't have any problems at all. I've tried everything so far now. Resetting my router, restarting my router, reinstalled windows, reinstalled drivers, got rid of the software suite, turned off firewalls, virusscanners etc. Everything.
I thought it was only with Insurgency but it's also bugging me with Battlefield 4.
So i have tried and done everything i could find on every forum on the internet. Still I don't get the download/upload/connection I am used to when using wireless. When i am in my room, which is 10m away from the wireless router, my download speed is max 1200 kb/s where I would easily get 2300 kb/s. Also when playing online games I am having big issues with my latency/ping. It goes from 60 to 200 to 400 and back every 15/20 seconds. I also own a Asus laptop and I don't have any issues at all with the wireless connection. When I am in my room there are no problems at all. I am starting to think that the Killer Wireless adapter is just a f*cked up thing. I bought a laptop (GT72 with 980m) for €2300 but I am having all these issues with the connection. It makes me really frustrated.
Longer vid of ingame netgraph:
nl.tinypic.com/r/97mjae/8
I am hoping that there is something that solves my issues. I'm starting to think that another wireless network adapter from another brand is the only option. Is there an option to change the wireless network adapter on my laptop because I will if I can. This piece of sh*t needs to be replaced.
Bye

TS1398 After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise. Thank you.

After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. I went through support page and done with "Reset Network settings" too but it doesn't help. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise.
It works fine in LTE network. The problem is with WIFI only.
Thank you.

Hey Siddh.s!
Here is an article that will help you troubleshoot this issue with your Wi-Fi connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Issues with ODI connection to Hyperion Financial Management

Hi,
I am having some issues with ODI connection to Hyperion Financial Management. ODI and Financial management are setup on different machines.
The ‘Cluster(Data Server)’ name in Topology is given as ‘hfm03cl’. On reverse-engineering a model it gives the following error:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 38, in ?
com.hyperion.odi.common.ODIHAppException: Error occurred in driver while connecting to Financial Management application [HFM1] on [hfm03cl] using user-name [admin].
at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
When HFM is installed on the same machine, it works fine. How does ODI identify a cluster on a different machine? Do I have to give the machine name along with the cluster name? If so, what is the format?
Thanks,
Su

You will need to have the HFM client installed on any machine that will be running ODI (i.e. Designer or Agent) that will be executing connections to an HFM server.
Once you have the HFM client installed, see if you can actually connect to HFM from that machine using the HFM client.
Couple of other thing, in the Physical Schema, have you set the Application Catalog and Work Catalog to the same HFM application?
Also, when you are reversing, are you using the local agent or one you have installed using agentservice?
geeo

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now?

Camera RAW update issue with Bridge CS6

Hi folks,
I recently installed a routine update for Camera RAW 8.4 and now have a bunch of issues with Bridge including -
- No previews or ratings showing
- Ratings filter not working
- Can't open images directly into Camera RAW without first opening Photoshop (ie - keyboard shortcut not working and File menu command "Open in Camera raw" not available)
- Can't access or open Camera RAW preferences
I've tried resetting Bridge to default settings but didn't help and ACR still works fine opening in PS. I've attached two screenshots to show the problem better.
Anyone else having these problems? Any solutions?

This should fix it: Camera Raw 8.4 | No metadata or Camera Raw edit

Issue with LDAP Connection becuase of Network issue

Hello All,
We have some network issues going on which is causing the NIC (Network interface card) to failover to another NIC. Due to this failover SUN access manager's LDAP connection pool fills up and we see errors in logs "Directory is down". We have to restart the Access manager to resolve this issue which refresh the connection pool of LDAP.
Now we have set the setting as recommended in admin guide/tuning guide. Like
1. Set event connection idle timeout to less that firewall or loadbalancer idle timeout value.
2. event connection retry count and interval on perticular error code.
Despite of above settings its not working out. Is there other way to get all the stale connections back to the LDAP pool without restarting the server?
Or something which handles the network failover or failback?
Regards
Chetan Kulshrestha

The user search name is the value you should be looking at in the LDAP attributes, that's the one that it will send to LDAP on a logon attempt. If you changed this value after mapping a group, I'm not sure but you may have to remap the group to get the change.
So on the LDAP side verify the user search attribute = the username you expect to login with (i.e. cn, samaccountname, uid, etc)
Regards,
Tim

Resolving issues with ios7 connecting to time capsule?

We upgraded our iPhone 4s and 5 to ios7. Now, they are having really random but frequent issues connecting to the wifi provided y a newish time capsule. A first generation iPad now has the most reliable connection! Although, frequently the speed is much less than was typical.
All was good before the OS upgrade and there have been no other changes in electronics in the house. We have only about three neighbors networks that infiltrate the house - at least visible ones.
I have tried taking the time capsule off auto channel select to no avail.
My best guess is our iPhone's are the cause of the network outages on the time capsule. Some form of interference or ??
Going to map my wifi coverage later this week .... But I am betting that will tell me the coverage is generally good.
Anyone with similar issues? Any thoughts on how to resolve? Can't downgrade the iPhone software.

Look around the forums here.. there are heaps and heaps of issues with iOS 7.. it has caused more problems for wireless networking than any of the earlier ones.
https://discussions.apple.com/message/23279758#23279758
Works better with the TC in router than bridge mode.
ll was good before the OS upgrade and there have been no other changes in electronics in the house. We have only about three neighbors networks that infiltrate the house - at least visible ones.
I would ring apple support.. after all, they caused the problem.

Issues with WIFI-connection in the Spotify app

I have a very annoying problem with my Nokia 5800 XM and the Spotify-app. I updated the app to v. 0.4.3.9 yesterday and it required that I uninstalled the old version first, i.e deleting all my cached tracks. Now today when I'm going to resync (on WLAN, since it's about 500 tracks) it just won't connect. I choose the correct WLAN from the list, but the app continues being blue (not green) and then the list pops up again. I read another discussion about almost the same thing a moment ago, so I tried to go to the menu and check the WLAN connection from its menu. So I did that, and it says my WLAN has full signal strength (I'm right next to the router) but then it loses the connection and asks me again which network I want to use. I have not had any issues with WLAN in any other app, and I have synced tracks with Spotify on my WLAN before, so I have no idea where the problem lies. Maybe something with the update and my WLAN? I don't know...
About the attachments: The list that shows several times and then the WLAN list where I'm connected to my network and it has full strength. "Marsvinsfarmen" is my network.
I'm thankful for answer, I use Spotify every day!
Solved!
Go to Solution.
Attachments:
Scr000012.jpg ‏51 KB
Scr000013.jpg ‏54 KB
Scr000014.jpg ‏50 KB

Okay everyone! I struggled with this problem for a long time, and I was just about to send a complaint to Spotify when it worked for me! See, I did a little different than before; this is the list I was going to file:
"1. I open Spotify from the application menu.
2. I choose "Online" mode.
3. My phone asks me how I want to connect to the Internet.
4. I pick "Easy WiFi".
5. I choose my WiFi network from the list.
6. Application seems to be signing me in.
7. My phone asks me again how I want to connect to the Internet.
8. I repeat the procedure. Spotify can't connect with WiFi.
-I have tried to connect using other WiFi networks, didn't work.
-Before I updated last time I could connect without problem.
-I can connect using 3G.
-I can connect using WiFi in other applications than Spotify, for example Opera Mobile and the native browser.
-I have reinstalled the application without difference."
However, I did it a little different, which made it work: instead of choosing "Easy WiFi", I choose my network directly from the list: see attachment. I never thought of that I could do so and I can't remember I did that before the update either. I have now synced my tracks and the app seems to be a little buggy, I still hope for an update, though it now works at least. Sometimes it crashes.
Please, tell me about if this worked for you and if you have other, better solutions. This isn't good enough, I still seek a better way.
/L
Attachments:
Scr000020.jpg ‏53 KB

IPhone 6/iOS 8 email issues with wifi connection

Hi
I have just upgraded from an iPhone 4 (iOS 7) to an iPhone 6 (iOS 8) and am having an issue with my pop email account. I used my iPhone 4 backup to set up new iPhone, so all the settings were as they were in my old phone. I have two email accounts, one is an IMAP account and the other is a POP account (which is my main email), I have no problems connecting to the server and downloading emails when connected via 4G (its super fast), but when I am connected via wifi, the POP account takes ages to connect to the server and check for emails (stuck on checking for email). I can speed up the process by closing mail app completely and reopening, then it checks and downloads really quickly (IMAP account has no problems), but this is frankly a pain.
I have spent ages on the phone with Apple support, who have got me to delete my POP email account twice, reset network settings, reset the phone using on/off button and home button, all to no avail. They are intent on telling me it's my email service providers fault, but as I pointed out there is no issue on 4G and my old iPhone (using iOS 7) on wifi has no issues, so can't be email provider. I have also tried using Apple's wifi in store to rule out router issue and the problem happened there too.
Have now run out of suggestions and options. I'm not sure if it's the phone itself, either a hardware or software issue (Apple support think not). Someone told me that it could be the wifi on my phone blocking the connection to the server. I have an appointment booked at the genius brand they have suggested wiping the phone and setting up as a new phone to see if the problem occurs, but this seems a bit drastic and I would lose all messages etc. Any help would be appreciated.

I have solved the issue! I tried my pop account on other devices with iOS 8 and the same thing happened, so I deduced that the issue is a glitch in iOS 8 with wifi and pop accounts. I managed to get hold of the IMAP settings for my email provider and all seems to be well. Happy days!

Iphone 4S issues with wifi connection related to 8.2?

I haven't had issues with this before and have had my phone for 4 months. Suddenly this morning I was alerted I am almost at my data limit and I still have 14 days to go! I noticed my phone wasn't connected to my home wifi! I tried to connect several times and it told me the password was wrong. I know it was right so I restarted my phone, router, and modem. I was able to connect but had to leave for work. When I got to work, I connected to the wifi as well in an attempt to not go over my data. My phone connects, then I look at it a while later, and it says 3G again. I googled the issue and found a lot of people talking about the same problem but it all seems to be from last year. Anyone else having this problem suddenly? I have Sprint.

Hello Elita One,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iPhone is dropping different Wi-Fi networks after being connected, I'd like you to please reset your network settings by following the directions outlined below.
Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
Have a good one,
Alex H.

Networking issues with bridged connection

Similar Messages

Maybe you are looking for