Networking issues with Windows SBS Server 2003

I have 3 G5 running on a recently installed 10.4.8, they were all previously running 10.3.9. They all connect to a network drive with folders that have color labels on them (only 2 blue and green). In 10.3.9 the labels were fine, now when the machine connects to the server the labels do not refresh utill you have been throught them and selected them all. I have tried delabeling and then relabeling them in 10.4 but it does not help. I have also tried it on another site and it does exactly the same. It also does not seem to matter what protcol you use to connect to the server (AFP, SMB, TCP/IP).
Anyone come across this before and know any fixes?

I dont really have much to offer here except that we use afp with our SBS server and this hasnt come up... on any of our 10.4.x machines.

Similar Messages

  • SAP GUI Memory issues on Windows Terminal Server 2003!!

    Hi All
    We are currently experiencing serious issues with our terminal servers and SAP GUI. It appears that SAP GUI is consuming a large amount of memory inorder to run, which in term is causing our terminal servers to page more.
    I am not sure where to start with this issue so any help would be great!
    Thanks
    Phil
    Loads of points if someone helps me solve this!!!

    Citrix won´t help much, it´s "just" a different protocol between the client and the server, Citrix itself will use even more memory.
    Why are you sure, that the reason for this is the SAPGUI and not any other Office program?
    Let´s calculate:
    I´m writing this message on a TS too. My Outlook (2003) consumes ~ 32 MB memory (incl. virtual), I have 4 SAPGUI windows open which consume 64 MB and some telnet sessions (no Word, Excel etc.)
    Let say roughly 128 MB all in all.
    If you have 2000 users with 20 servers, means, 100 users on one server, that would be 12,8 GB memory - not caclulated other services running on that box (printserver etc.) including the operating system itself.
    If your users have Internet Explorer (or other browsers) open too, you will need to add that amount too. 128 MB per user is the minimum.
    If users use BEx (or other .NET based BI developer tools), that amount will doubled (at least).
    SAP recommends a PC with at least 256 MB memory to run a SAPGUI with acceptable performance, do you have that much per users? How big are your single servers?
    Markus

  • TouchSmart 610z CyberLink Media Library Service issue with Windows Home Server Connector

    After unboxing and configuring my TouchSmart 610z PC at one point I noticed that they TouchSmart "Photo" app stopped working.  Whenever I launched the app, I would get an error message stating that "Cyberlink MediaLibrary Service has stopped".  
    I called HP support and after trying several things, the rep advised me to do a full system recovery (Factory Defaults).   After the recovery, I started configuring (installing software and tweaking settings) and at some point the same thing happened again.  I tried to go back to various system restore points, but once the problem starts ocurring, it persists.
    After another fully system recovery, I started installing/configuring things 1-by-1 and testing the Photo app after each step (VERY time-consuming).  Finally I discovered that the "Windows Home Server Connector" software is what seems to cause the problem.  The connector itself works as intended, but there seems to be some conflict with the TouchSmart Photo app that causes the error message to appear/persist.   For what it's worth, my Home Server is an HP MediaSmart Server EX475.
    Anyone successfully connect their TouchSmart 610 to their home server and successfully run the TouchSmart Photo App?
    Seems like this might be a bug of some sorts.

    I see some message about a proxy. Have you checked that you can use the proxy from you network?
    If not you should turn the proxy off.
    Timo

  • Network issues with Windows Server 2008 and MacOS

    Hello there,
    I believe it is a long shot, but i am running out of options. I got a video streaming server software running on my windows server 2008. It has a client that runs on MacOS and Windows. The windows client works just fine, but the macos client cannot stream
    a few videos.
    I've tried installing the streaming server on windows 7 and my mac client worked just fine, so I believe that win server 2008 got some sort of configuration that is blocking the correct communication between software. 
    Since the software devs could not tell me what's wrong or how to fix it, I thought I might get some help here (kinda of a last hope thing). I have tried installing codecs, enabling desktop experience and nothing worked.
    So, here is my question: Is there anything that windows server has that windows 7 do not that might be causing this scenerio?
    Thanks,
    Lucas

    Hi,
    Have you disabled the firewall on the windows server? The firewall may block the traffic if it isn’t configured properly.
    If it still doesn’t work after disabling the firewall, please install the Network Monitor on the windows server and client. Then capture the traffic of the video when the server and windows7 runs your software.
    Try to compare the traffic of windows server and windows7. Find out the difference between them.
    To download Network Monitor, click the link below,
    Microsoft Network Monitor 3.4
    http://www.microsoft.com/en-hk/download/details.aspx?id=4865
    The following article is about how to use the Network Monitor,
    Network Monitor
    http://technet.microsoft.com/en-us/library/cc938655.aspx
    Hope this helps.
    Steven Lee
    TechNet Community Support

  • SL Server Permission Issues with Windows XP Clients

    I'm running into some permissions issues with Snow Leopard Server. I know it's specific to SL Server because I have two Leopard servers and neither one is affected. All servers are set up the same way.
    I'm using this SL server as a file server in the golden triangle approach: AD for Users, OD for Groups that supply AD User membership. I have one volume per OD group, and that group has read/write privileges to that volume via the default Server Admin read/write ACL. POSIX permissions are 770 on the top level directory, and ownership is set to the AD user who owns the volume, and the OD group the volume belongs to.
    The client is XP SP3. When the client accesses a share on the SL server, their access is correctly granted and they can browse the share and read any files inside the share. They can copy files to the share from wherever. They can open, edit, and save files. However, they cannot rename or delete files within the share. They cannot rename folders, but can delete them. This affects all AD users regardless of the OD group they're in.
    I have a few Windows 7 and Vista clients on the network, and these two OS's are not affected by this so the problem is limited to XP. If I create a user in OD, and auth to the sever from the XP client as that user, the problem goes away, so it's something to do with AD and SMB.
    I do have a ticket in with Apple support, which was escalated to Engineering. Still waiting on that.
    Things I have tried that have not worked/helped:
    -Modify the ACL to Full Privileges
    -Tried removing/re-adding user to OD group.
    -Remove darwin_streams from vfs_objects in smb.conf
    stream support = no
    ea support = yes/no (tried both ways)
    darwin_streams:brlm = no
    -Added nt acl support = no to smb.conf
    per http://bit.ly/6aYycW
    -Animal sacrifice..... ??
    Help?

    I need to do more testing, but I think the fix is to add "acl check permissions = no" to the bottom of /etc/smb.conf:
    ; Site-specific parameters can be added below this comment.
    [global]
    acl check permissions = no

  • Mac osx 10.6 with sbs server 2003

    Hi everyone
    i m using mac osx 10.6 on my imac . i want to connect it with sbs server 2003 , then i want to to make a map drive on it .I m trying it to cmd+k to connect with server but it not connecting , i m wondring do i need to configure any thing else to connect with windows server .
    cheers

    Hi John,
    thanks for your advice, I have actually been using the two links you provided,
    yet they both lack support for the home user, and all suggest that the users have a static ip address, but this is sadly not the case.
    has anyone used . http://www.dyndns.com/about/home_solutions.html
    Does anyone use this service at home for their server and which settings did they use ?
    This would at least let me think Im working along the right lines.
    Im getting stuck with the Primary DNS questions along the setup route from apple setup. : (
    thanks again
    Yaddle.

  • Weird issue with Windows Server 2008 R2 Print Server

    I have an issue with Windows 2008 R2 (VMWare Hosted) running Windows Print Server. 
    Prior to a small network change, the print server was working well, hosting about 80 different networked printers from various vendors. 
    We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers). The DNS servers never quite worked right and broke AD authentication to different servers, and was just a mess.
    After rolling back we are not able to keep the printers online. If we ping them from the print server, the printer(s) never wake up, when a print job is submitted. If we ping them from one of the access switches, they work fine (until they fall back asleep),
    to prevent this, if we start a ping on the server AFTER waking them up from the Switch Ping, they stay online and no problems. 
    If we stop the ping, they fall back asleep at some point, and again, won't wake up without intervention/switch side ping. 
    Has anyone experienced anything like this? Any tips on how I could possibly resolve it? 
    Thanks in advance.

    Hi,
    According to your description, the issue seems to be that the printers can't keep online. Sounds like a power managerment issue. Why these printers fall into sleep? Have you consulted this issue with the manufacturer of these printers? Do these printers
    fall into sleep if them lose the contact with printer server? Have you tried to reset the printers?
    >>We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers).
    DNS client will cache the recently queried records. If the DNS server has replied with a wrong records, communication issues will occur. To clear the DNS cache on a Windows device, please run the command below:
    ipconfig /flushdns
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Network issue with initial connections on Hyper-V

    This is the opposite of all the other networking issues I have seen with Hyper-V- anyone run into this?
    I am running Hyper-V on a Server Core installation, and have had the same issue when I used Server 2012R2 as when I used Server 2008R2 on the same server as a virtual host. The server is an HP ProLiant DL360 Gen8 with 2x 8-core processors, 32 GB RAM. The
    VM is sized and configured to stay within 1 NUMA node. It uses a single port of the 4-port HP/Broadcom 331 NIC, with all the TCP LSO settings disable at the switch, host, and guest, same with the power management settings. We have ProxyARP on the network,
    so I have set the ArpRetryCount key to 0.
    I have seen it happening with and without SR-IOV enabled. The guest OS is an RDS server, so for the sake of our CAL's it has to stay at Server 2008R2. I have set up a HOSTS file to mitigate this problem, as it seems to be a DNS issue- Here's what happens:
    The first time I visit a resource, the server will timeout. An example not in our HOSTS file does this consistently: If I go to https://mail.mydomain.com/OutlookWebAccess, it spins for a couple of minutes before timing out. I hit refresh and the page loads
    immediately. This server is colocated in-house, as is the mailserver. I'd say it is a DNS issue at some level, but I'd like to know what level it is- Is it just timing out trying to cache the DNS request, or is there a performance issue with a DNS server on
    the network? (All of our DNS is AD-integrated running on DC's).
    Here is where I'm seeing this:
    Internet Explorer- described above
    Salient Interactive Miner- at the login screen, it searches for a database and times out. If I go to the setup and enter the IP address, it still times out. It will not find the database server until I quit and restart the program. If this is the same issue,
    it would obviously not be a DNS problem.
    I DON'T see it in GP9 connecting to a datasource
    Prior to setting up the HOSTS file, I saw this in Windows Explorer connecting to network shares on the same LAN segment.
    This appears to only happen to the Hyper-V guest OS. As a best practice, whenever Windows Update runs, I update the Integration Components.
    I have the bindings properly ordered on the guest VM, with the network adapter the goes to the physical NIC first, and IPv4 ordered before IPv6.
    All updates are isntalled, and the firmware is at it's latest revision.
    Any ideas?

    Hi Daniel,
    " This appears to only happen to the Hyper-V guest OS. "
    Do you mean that any other hosts can access the network resource normally  except these VMs ?
    If yes , my suggestion is to disable the VMQ on the physical NIC  for the VMs , then try test again .
    Best Regards
    Elton Ji
    If it is not the answer please unmark it to continue
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Window SBS server 2008 and window server 2008 R2 on the same domain

    Hi all,
    I am a person only work for linux system. Recently i work for my company that using microsoft technologie. So i have a lot of trouble. Could you please help me and below are my big troble that i have met:
    In my system, i have the first window SBS server 2008 run on our domain. However my organization growth up and we have more than 150 users and mailbox of exchange server 2007. So i do not want to use my sbs server 2008 anymore.
    I am going to install a window server 2008 R2 64 bit and join it into the same domain with sbs server 2008. It will be replicate the username, dns, OU and group policy...After that i will tranfer FSMO role to new server and i will demote then remove the
    sbs server.
    My boss say that i should not use this solution because window server sbs can not run with any other kinds of window server 2008 (R2, standard, enterprise...) and it will automatically shutdown the main server after a couple of days.
    Someone have experience can help me. I am so confuse now

    Maybe this will also help to better understand the steps involved:
    Transition from Small Business Server to Standard Windows Server
    http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
    Migrating away from SBS 2011
    http://social.technet.microsoft.com/Forums/en-US/07c58cc4-7d6d-419a-b1a0-439c2cc0c48d/migrating-away-from-sbs-2011?forum=smallbusinessserver
    Migrating from SBS 2008 to Windows Server 2012 R2 (NOT Essentials and with NO Exchange)
    http://social.technet.microsoft.com/Forums/en-US/1276d2d3-a8f2-4786-82f3-4308a2affb11/migrating-from-sbs-2008-to-windows-server-2012-r2-not-essentials-and-with-no-exchange?forum=smallbusinessserver
    And remember, as long as you don't move the PDC to one of the new DCs, you can leave the SBS 2008 up indefinitely. But I would remove Exchange 2007 off it right away once I've migrated the mailboxes and public folders, otherwise
    you will get yourself into an Exchange coexistence scenario which is much more complex to configure and support because of the CAS differences, changing the URLs on the old one to "legacy.domain.com," getting a new UC/SAN cert with the correct
    names on it, and more. Believe me, you really don't want to coexist them. The only time I've coexisted Exchange versions is during large migrations, such as 500 or more. Otherwise, I just migrate the mailboxes over a weekend and get it done with.
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • Cannot run the big size exe file ( 900MB) on Windows Storage Server 2003 x86 SP2 OS(Hyper-V VM machine)

    When I run a big size exe file(>900 MB) on Windows Storage Server  2003 x86 SP2 OS VM mchine(which is managered by Hyper-V server), I got the following error message:
    Windows cannot open this program because the license enforcement system has been tampered with or become corrupted.
    This setup.exe should be a trusted source because of it run other OS(windows 2003, windows 2008, 2008 R2 etc.).  we use the same way to create the exe whose size < 700MB, it works fine on the same machine(Windows Storage
    Server 2003 x86 SP2 OS VM machine).  So I assume that the file size(>900MB) causes the problem, It seems that OS dont' support it.
    My questions:
    1. Is there the limitation of exe size to run on Windows
    Storage Server  2003 x86 SP2 OS VM machine?  If yes, what is the size of limitation?
    2. What reason is this error? Is it related with Hyper-V?
    Thanks,
    Recky

    Did you install the 2003 VM from scratch or did you create it via a P2V process?  In addition to what Shaon says about not all applications running properly in VMs, performing P2V to create VMs can also cause issues with a variety of things. 
    First thing to check would be Shaon's suggestion to try it in another VM.  If it works in another VM, and you P2V'ed this VM, try creating your Storage Server VM from scratch and try again.  Better yet, if the application can be run on a later version
    of the OS, create a 2012 Storage Server instead of the 2003 Storage Server as your VM and give it a try.
    .:|:.:|:. tim

  • Is BPC 7.0 compatible with Windows Terminal Server 2008?

    Is BPC 7.0 compatible with Windows Terminal Server 2008? We are having printing issues when on WTS 2003.

    BPC 7.0M SP08 was released on September 1st and now supports the client install on both Server 2008 and Windows 7 so yes, you should be able to use terminal server in Windows 2008 if you install SP08. It also has limited support for Office 2010, full support will come with SP09. SAP Note 1490544 is the central SP08 note, and 1504400 is the download note.
    -Brian

  • URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.

    Hello SAP community,
    I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
    When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
    But when I click than on NWA (example), I am getting "http 500 server error".
    I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
    But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
    Than it is working without problems with Windows 7 and Internet Explorer.
    I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
    We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
    Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
    Thanks for your help.
    Best regards
    Carlos

    Hi all,
    I think I found the solution.
    The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
    That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
    When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
    Internet Explorer Options => Settings for compatibility view => Add domain
    Best regards
    Carlos

  • Admin Commands issue on Windows Web Server 2008 R2 - 64Bit

    Hi,
    I have tried exactly same process on FMS3.5 Installed on Centos and it worked perfectly.
    But not working in case of Windows Web Server 2008 R2 - 64Bit.
    Here is what i am trying to do -
    Basically i want to extract live streams list and display them in HTML as ordered list on another server them FMS.
    What i did in the case of FMS on Centos server -
    I installed Apache and PHP on this server and created a PHP file with following text in it. -
    abc.php
       $xml = simplexml_load_file('http://<fms-server-ip>:1111/admin/getLiveStreams?auser=admin&apswd=password&appInst=live','Simple XMLElement', LIBXML_NOCDATA);
    foreach($xml->children() as $child)
       foreach($child->children() as $child2)
              echo $child2 . ",";
    and in hosting server where i want to display the list i entered following code in PHP file -
    $homepage = file_get_contents('http://<fms-server-ip>/abc.php');
    echo $homepage;
    i got comma seperated values easily and everything is loading fast without any issue.
    Now problem occured with Windows Web Server 2008 R2 - 64Bit.
    I installed FMS, Apache and PHP in this server also, did evrything in the same way like in centos.
    FMS, APache and PHP files are working fine in this.
    But only problem occured when in abc.php i use
    $xml =  simplexml_load_file('http://<fms-server-ip>:1111/admin/getLiveStreams?auser=admin&apswd=password&appInst=live','Simple XMLElement',  LIBXML_NOCDATA);
    After this file do not loads and takes longer time to load and after some time a blank page appears. It works fine with a local XML file.
    i am able to see the XML file by opening it directly in browser, but somehow this is not working with   simplexml_load_file. I dont think this is PHP issue because with local XML file it works fine. May be some port issue or something else. But i am able to view XML file directly in browser from another computers as well.
    Kindly help, is there some other configurations should be changed in case of windows version. I have allowed admin commands as usual before doing all this. Ports 1111,80,1935 are also opened.
    Please guide

    Hi,
    Yes in Browser, the response is perfect. The only issue is in Calling inside in any file, i even tried Javascript's XML dom to load it, but same result, the file is just loading and never loads completely. I also tried using an SWF file with AS3 code to load XML inside as3 and send the result to any JS function.
    The output comes using trace in as3, but when it comes to browser, the same loading happends and result never loads.

  • Tips to install Sap Gui On Windows Terminal Server 2003

    Does anybody know any method to install SapGui on Windows Terminal Server 2003 to share it to many users ?
    The problem is: when I try to install Sap Gui 6.40 via Control Panel-Add/Remove Programs it tells me that I must change the mode with "change user /install". I dont know the reason why it reports me that if I do it via Control Panel. And if I do that and then I launch the installation again it reports me the warning again.
    What should I do ?
    Thanks in advance for your help.

    We have SAP R3 4.6C.
    We want to optimize the bandwidth in a 802.11b radio. Because of that we dont want to run any application in the hand-held.
    We'll intend to launch a remote desktop on a dozen hand-helds connecting the Windows 2003 Terminal Services server. In this server we could run SAP GUI, WebSapconsole or the browser.
    Its important to note that the hand-held computers must only show the designed windows (sized to 16x20), removing title bars, transaction bar, menu bars, tool bars, status bars, etc. For this purpouse I think we can use WebSapconsole.
    With this method we have noticed that when a error or warning is displayed it hides some part of the screen instead of presenting in the status bar.
    I hope you all your doubts are clear now, if not just tell me.
    Thank you.
    PS. Sorry for my english.

  • Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

    Hi,
    I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
    In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
    During the process, I faced some issue with the output server in printing the labels.
    When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
    The file is move to the error folder and an error file is getting generated which contains the error message as given below:
    090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
    090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
    2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
    The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
    I also verified the license and it is a valid licence.
    Kindly help me out in solving this issue.
    Thanks
    Senthil

    I assume this is too late to help you, but other might need a hint.  I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
    It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
    Hope this helps anyone....
    Vegard

Maybe you are looking for