Networking MacBook Pro with eMac including firewire disks

Yep, basically that.
I just got a MacBook Pro, OS 10.7.4
Previously I've been able to connect Macs to my eMac PowerPC 10.4.11 with ethernet cable and the firewire drives connected to it, but now when I connect I just see the user names listed as volumes, and when I open those the sole folder available is a "Drop Box" that "can't be opened because you don't have permission to view its contents.
thanks in advance for your help!

First the scratch. Like you said, most everyone has a different take on scratch discs but I'd guess you're wasting one heck of a lot of hard drive space using all 500 GB for Scratch, did I read that right? If I did read it correctly YES, partition it and get some use out of it!!
I've got a unibody MBP 2.93GHz, OS 10.5.8, CS3 & PS 5 (running in 32bit mode), and 8 gigs of ram. I've partitioned the one 300 GB drive so 50GB is scratch, the other partition is for OS, & Apps, and documents (images).
I use LR 2 first than export to PS 5 to finish up. My photos get to be 300MB to 500MB in size and both versions of PS work on this setup just fine. Using PS 5 in 64 bit mode is faster opening files but NON of my plugin's are 64 bit yet, that's why I'm still stuck in 32 bit mode.
Not knowing what size or kind of files you work on makes giving advice a bit tough but try setting the status indicator (don't know the right name for it) in the bottom left corner of any PS open file to "Efficiency" and watch what happens when you process your files. I rarely see mine drop below 90%, I've got the usable RAM in PS Prefs set to it's max suggested, cut way back on History and Cache.
Can't wait for NIK and others to offer their plugin in 64 bit, later this year is what I was told.
There used to be an old "rule of thumb" with old version of PS about Scratch disc size. I don't remember exactly but it may have been 3 to 5 times the size of your biggest file??
Good luck, Alan

Similar Messages

MacBook Pro Boot Hangs when Firewire Disk Connected

I have a 13" Late 2011 MacBook Pro with SSD running Mountain Lion 10.8.1. I have a 1 TB WD Firewire disk attached. I boot from the internal SSD.
On a regular basis when I turn my computer on, it starts up but gets hung during the boot process. If I turn it back off, disconnect the FW and then turn it back on, it boots normally. I can then plug back in the FW and it runs fine.
This problem has started since I upgraded OSX, although I added the SSD around the same time. I have updated to the latest firmware on the external WD disk. All Mountain Lion updates have been loaded.
Any ideas how to fix this problem or where to look for further information.

I have a 13" Late 2011 MacBook Pro with SSD running Mountain Lion 10.8.1. I have a 1 TB WD Firewire disk attached. I boot from the internal SSD.
On a regular basis when I turn my computer on, it starts up but gets hung during the boot process. If I turn it back off, disconnect the FW and then turn it back on, it boots normally. I can then plug back in the FW and it runs fine.
This problem has started since I upgraded OSX, although I added the SSD around the same time. I have updated to the latest firmware on the external WD disk. All Mountain Lion updates have been loaded.
Any ideas how to fix this problem or where to look for further information.

Wirelessly networking Macbook Pro with Powerbook G4

I have a Macbook Pro, and a Powerbook G4. Both running Tiger. Both connected fine to the internet via Dlink wireless router. But when I click in Macintosh HD -> Network, neither of them show the other in the list. I want to be able to move files between the laptops but I'm a network dummy.
Anyone out there who can help?

Did you turn on file sharing? In the filesharing preference, the name of your computer is listed along with "Computers on your local network can access your computer at: xxxxxx.local"
In one computer, you can go to the other (filesharing = on) by finder > Connect to server yourcomputer.local
Don't feel bad about not seeing them in the "network"; I never saw my computers there either.
You can also go to the network pref pane and go to airport > tcp/ip and look at the number 192.... and enter that. The name should work though.

Can a MacBook Pro with Leopard be Target Disk mode to take my Snow Leopard iMac data?

I might be going about this wrong, but I wonder if it can be done: I have an older MacBook Pro that has a clean fresh install of Leopard on it. I would like to get my current account and data from my iMac (running Snow Leopard) on to the MBP by using Target Disk Mode. I tried to take saId data off the iMac by target disking it ( FROM iMac TO macbook ) but that gave me a warning about going from a newer operating system down to an older one. Soooo... can I go in the other direction and target disk the laptop? Somehow, I don't think that is really the best way to do it. I do not have the Snow Leopard install disk anymore, so I can't upgrade the laptop. But is that what I am really going to have to do, to do this right? Thanks!

You can't migrate a user account from a later OS to an earlier one.
You can use TDM to move your data by drag & drop, but you won't be able to retain all preferences.
Easiest way would be to put the MBP in TDM and use Disk Utility from the iMac to erase the Macintosh HD on the MBP and then use the Restore function to clone the whole system from the iMac to the MBP.
But there are caveats - If the OS on the iMac was installed originally from a retail SL disc (white with white cat on it) this should work fine.
But - if the OS on the iMac is the one it shipped with (installed from a grey disc), it won't have the battery management software required by the MBP.
In that case your choices are limited to manually moving your data from your home folder to the new account on the MBP, or buy a retail SL disc and upgrade the MBP then use setup assistant to transfer the user and applications.
As always, I would recommend backing up your data from the iMac to an external drive before starting any of this.

My w2207h HP Monitor is not working on my macbook pro with hdmi minidisplayport adapter. On Windows 7 via bootcamp it works. What can i do ?

As is said my HP w2207h monitor is not working with a minidisplayport to hdmi adapter and a hdmi cable which is working fine for my PS3. So the cable is not the problem. And on my TV i also have no problems at all activating a second monitor. Therefore the adapter isnt the problem either. When i plug it in the typical bluescreen appears. Then after a few seconds it appears again and there is no second monitor recognized. I also used the "recognize Monitor" button without success. Please help me, are there any special drivers or something like that ?
PS: bought a high end expensive adapter now because the old one was very cheap. But didnt help. Still stuck on the macbook not recognizing anything !

If you have an external drive you can hook up to the MacBook Pro I believe there *may* be a solution by getting an image to the MacBook Air.
On the MacBook Pro with the Windows install disk in the DVD drive fire up disk utility. Select the DVD and then hit the "New Image" button. Disk Utility should offer to create a disk image from the DVD. I would put that disk image on a USB drive connected to the Pro. You should be able to mount that image when you connect up to the Air. Hopefully BootCamp will be able to access that all through the process.
If that doesn't work (the drivers don't recognize the disk image once Windows gets underway for its install), you might try copying the installation files from the DVD to FAT32 formatted USB stick or drive and then using that to install Windows. I would expect Windows would be able to see the USB FAT32 drive and I don't believe any file on the drive is going to go beyond 4GB.
I haven't actually tried BootCamp on the Air, since I just use VMWare which has no issue installing from anything OSX can see. But BootCamp is going to eventually hand off operations to Windows and that's going to complicate matters--Windows has to be able to see the drive. While I believe there are drivers that let Windows connect to that drive, there's no way to authenticate (or even load the drivers I expect) before Windows itself is loaded--so it's a "chicken/egg" problem.

I am using a macbook pro with system 10.6.8. I just discovered that no recent files have been backed up to the external disk using Time Capsule. There is a long list of backups including most recent but no recent files, for some weeks, have been backed u

I am using a macbook pro with system 10.6.8. I just discovered that no recent files have been backed up to the external disk using Time Capsule. There is a long list of backups including most recent but no recent files, for some weeks, have been backed up. I did a full reset of Time Machine. I disconnected the external drive and reconnected it. It is not a matter of file types, no files and no folders have gotten backed up. Everything looks normal though unless one goes hunting for recent files on the back up.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

I need to repair a Macbook Pro with disk utility using target mode to another my iMac. Can I use ethernet cable or must it be firewire?

I need to repair a Macbook Pro with Disk Utility using target mode connected to my iMac. Can I use ethernet cable to connect them or must it be firewire?

Firewire

I am going to replace my 3 year old MacBook Pro with a new MacBook Pro Retina display machine. I have been told by Apple that I can use the Migration Assistant ON MY WIRELESS NETWORK (no cables) to transfer data... I've read this can take AGES.. True?

I am planning to replace my 3+ year old MacBook Pro with a new MacBook Pro, Retina display... I have been told by "chat" on the Apple site that I can transfer my data wirelessly... on my network.. Is is a good option? I don't want to invest in cables if I can help it... since the old machine has firewire and the new one has thunderbolt! Will the wireless transfer take forever... as in 30-50 hours??? I've been hearing these horror stories...

Ralph Landry1 wrote:
Recently did one MacBook Pro to another for my daughter...almost full 500 GB HD estimate wireless was 48 hours, wired took a little over an hour.
Wow, shocking in comparison. You have the patience of a Saint !

How do I install iWork disk on MacBook Pro with Retina Display?

I have recently purchased a MacBook Pro with Retina Display and would like to install iWork on it. I do not have the device needed to use disks on this laptop as it doesn't have an optical drive. Is there any way I could download some sort of software and use a key to identify my disk? Or something along those lines because I'm sure apple would have thought that this problem would occur.
Thanks

That's why Apple no longer sells disks. All its software is now available on the App Store. So you can either purchase/download the iWork components from there, or, if you have access to another Mac with an optical drive, share the DVD from that across the network (System Preferences - Sharing - turn CD/DVD sharing on) and install that way.
Matt

MacBook Pro with SSD that has a limited disk space (120GB). Rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.

I'm using MacBook Pro with 128GB SSD that has a limited disk space. As we know, when rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.
My question is, Is there any method to get the rendering Projects file saved into an external hard drive which is connected with USB/ Thunderbolt/ Firewire, with huge disk space (eg. 500GB HDD).
Now, new project created in my Mac is automatically saved in (User/Movies/Final Cut Projects) and my Mac has ran out of space to hold the files.
Thank you.

You have at least 3 different ways to show the project library:
1) Go to WIndow->Show Project Library
2) Click the button in bottom left of your window:
3) Hit the keyboard shortcut (Command-0)
The project library will be shown, occupying the area where the timeline usually is.
Your hard disks will be visible. Click the hard disk where you want the new project to reside and hit Cmd-N to create a new project.

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there.

Can't install HP Color LaserJet 2600n to my new macbook pro with Yosemite ? Message error : "Can't download the software because of a network problem."

Hello,
I'm trying to install my HP Color LaserJet 2600n (USB) to my new macbook pro with Yosemite ? It detects the printer but when I try to install it, I get the message error : "Can't download the software because of a network problem."
I tried to install the software via the HP website. It's not working.
Can someone help me with this one ?
Thanks,

HP Print Drivers

I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display.

I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
******A true apple fan********

Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
Bebers5

Hi. I have a MacBook Pro with OS10.6.8 and cannot get net pages to load on my network at home. I can connect to the internet in work and on other networks. However, some other networks are now starting to fail. Can anyone suggets how I can fix it??

Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??

Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??

How can i copy files from one external hard disk to another using macbook pro with retina display

How can i copy files from one external hard drive to another using macbook pro with retina display?

That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
Clinton

Networking MacBook Pro with eMac including firewire disks

Similar Messages

Maybe you are looking for