Networking? More like Notworking (Wicd and Network Manager Broken?)

Wicd won't run for me and NetworkManager never seems to be able to connect because of some errror.
$ sudo systemctl start wicd
Failed to issue method call: Unit wicd.service failed to load: No such file or directory. See system logs and 'systemctl status wicd.service' for details.
I see that systemctl doesn't see wicd yet, so I'll reboot in a second and try to start wicd again.
Here's what nm-applet prints out when I try to connect to my local network.
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
** (nm-applet:31344): WARNING **: Failed to register as an agent: (32) Session not found
** (nm-applet:31344): WARNING **: async_got_type: could not read properties for /org/freedesktop/NetworkManager/ActiveConnection/1: Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
** (nm-applet:31344): WARNING **: async_got_type: could not read properties for /org/freedesktop/NetworkManager/ActiveConnection/1: Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
** (nm-applet:31344): WARNING **: Connection activation failed: (1) Creating object for path '/org/freedesktop/NetworkManager/ActiveConnection/1' failed in libnm-glib.
** (nm-applet:31344): WARNING **: async_got_type: could not read properties for /org/freedesktop/NetworkManager/ActiveConnection/1: Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
and a little error window pops up with the following message
(1) Creating object for path '/org/freedesktop/NetworkManager/ActiveConnection/1' failed in libnm-glib
Any ideas? So far I can only connect using netcfg, and even then I lose my connection every so often, and I can't connect to anything if the NetworkManager.service is running.

10PinkPanther wrote:Disabling or remowing netcfg worked for me with disconnecting problem.Once it was disabled network manager or wicd worked fine.
Netcfg isn't enabled, though. Nor have I been able to ever start netcfg successfully.
Here's what happens when I try to start it.
$ sudo systemctl start netcfg
Job for netcfg.service failed. See 'systemctl status netcfg.service' and 'journalctl -xn' for details.
Here's what systemctl status returns on netcfg.
$ sudo systemctl status netcfg
netcfg.service - Netcfg multi-profile daemon
Loaded: loaded (/usr/lib/systemd/system/netcfg.service; disabled)
Active: inactive (dead)
CGroup: name=systemd:/system/netcfg.service
Dec 01 15:48:11 Beleriand systemd[1]: Unit netcfg.service entered failed state
Dec 01 15:48:26 Beleriand systemd[1]: Starting Netcfg multi-profile daemon...
Dec 01 15:48:26 Beleriand netcfg-daemon[7446]: No recorded netcfg state to restore
Dec 01 15:48:26 Beleriand systemd[1]: netcfg.service: main process exited, code=exited, status=1/FAILURE
Dec 01 15:48:26 Beleriand systemd[1]: Failed to start Netcfg multi-profile daemon.
Dec 01 15:48:26 Beleriand systemd[1]: Unit netcfg.service entered failed state
Dec 01 19:08:35 Beleriand systemd[1]: Starting Netcfg multi-profile daemon...
Dec 01 19:08:35 Beleriand netcfg-daemon[4884]: No recorded netcfg state to restore
Dec 01 19:08:35 Beleriand systemd[1]: netcfg.service: main process exited, code=exited, status=1/FAILURE
Dec 01 19:08:35 Beleriand systemd[1]: Failed to start Netcfg multi-profile daemon.
Dec 01 19:08:35 Beleriand systemd[1]: Unit netcfg.service entered failed state
Here's what journalctl -xn returns
$ sudo journalctl -xn
-- Logs begin at Mon, 2012-11-26 12:49:07 EST, end at Fri, 2012-12-07 10:41:30 EST. --
Dec 07 10:06:17 Beleriand dbus-daemon[389]: dbus[389]: [system] Rejected send message, 11 matched rules; type="error", sender=":1.97" (uid=1000 pid=13824 comm="
Dec 07 10:06:17 Beleriand systemd[1]: Stopped Network Manager.
-- Subject: Unit NetworkManager.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/9d1aaa27d60140bd96365438aad20286
-- Unit NetworkManager.service has finished shutting down.
Dec 07 10:06:28 Beleriand metalog[384]: fo> (eth0): device state change: unavailable -> unmanaged (reason 'removed') [20 10 36]<14>Dec 7 10:06:16 NetworkManage
Dec 07 10:07:19 Beleriand metalog[384]: dhcpcd -qL -t 10 eth1<86>Dec 7 10:06:28 sudo: pam_unix(sudo:session): session closed for user root<30>Dec 7 10:06:31 d
Dec 07 10:41:01 Beleriand systemd[1]: Starting Netcfg multi-profile daemon...
-- Subject: Unit netcfg.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/7d4958e842da4a758f6c1cdc7b36dcc5
-- Unit netcfg.service has begun starting up.
Dec 07 10:41:01 Beleriand netcfg-daemon[421]: No recorded netcfg state to restore
Dec 07 10:41:01 Beleriand systemd[1]: netcfg.service: main process exited, code=exited, status=1/FAILURE
Dec 07 10:41:01 Beleriand systemd[1]: Failed to start Netcfg multi-profile daemon.
-- Subject: Unit netcfg.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d
-- Unit netcfg.service has failed.
-- The result is failed.
Dec 07 10:41:01 Beleriand systemd[1]: Unit netcfg.service entered failed state
Dec 07 10:41:30 Beleriand metalog[384]: oot<37>Dec 7 10:24:42 sudo: palantir : TTY=pts/6 ; PWD=/home/palantir/repos/core/pkgbuilds/wine-starcraft-optimized/2i/

Similar Messages

Hi there can anyone help. I am connected to the internet by ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no internet connection. the other wireless laptop in my flat works well.

Hi there can anyone help. I am connected to the Internet by Ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no Internet connection. the other wireless laptop in my flat works well. Could the other wireless laptops being used in my flat be affecting my connection. what can I do to get connected, keep connected. Thanks for any ideas out there.

My network connected for a few hours then went back to timing out. I have not changed anything. However there four additional laptop users in my family who do not seem to be having any problems using their wireless connection. Could their film and music downloads be causing the timing out of my connection and if so is there a way I could prioritizes my computer or limit their use?

I spilled a little bit of soda on my keyboard ( more like big drops) and my computer won't turn on but it will still charge. After i spilled it it kept trying to turn on and off by itself until i finally just shut it down

I spilled a little bit of soda on my keyboard ( more like big drops) and my computer won't turn on but it will still charge. After i spilled it it kept trying to turn on and off by itself until i finally just shut it down. Today i tried to turn it back on ( i spilled it last night) and now it won't turn on but when i plug it in the orange light comes on so it still charges.

TBF: You may have been lucky enough not to cripple your MBP immediately with your spill, but a spill such as you describe will have left obvious traces if you ever need to take your machine in for a repair of any kind. And as soon as evidence of the spill is found, any chance of the necessary repairs being performed under warranty will be gone.
Taking the machine in now to be cleaned and have the greasy parts replaced will be expensive, but doing so may save whatever remains of your warranty. For a price, Apple will restore the machine to like-new condition, and at the very least, you will then have a 90-day repair warranty on it. If you have significantly more time than that remaining on your original one-year warranty, and especially if you've bought the extended AppleCare Protection Plan, it would probably be worth taking the machine in to a Genius Bar for a look-over. Ask whether, if you have Apple clean and repair the machine now, your new-computer warranty and AppleCare plan will be reinstated afterward or whether all you'll have is the short repair warranty from now on. If the spill will negate your warranty and AppleCare even if you have Apple clean it, then the cleaning probably isn't worth paying for. But if paying for the cleaning will get your warranty and AppleCare reinstated, it may be worth doing.

I just updated my iPhone 5 and Siri sounds more like a robot and I don't know what's wrong. My iPad Siri and my moms iPhone Siri sound like real people. Why doesn't my phone Siri sound like it should???

Siri sounds more robotic on my iphone for the iOS 7 update..... Help????

Hello smartbud,
The following article provides steps for changing the way Siri sounds.
Can I change how Siri sounds?
New female and male voices will be available initially in U.S. English, French, and German. You can change the gender by going to Settings > General > Siri > Voice Gender. Your iOS device initially uses a compact voice for Siri. iOS will automatically download and install a more natural-sounding voice when you first connect to power and a Wi-Fi network.
iOS: About Siri
http://support.apple.com/kb/HT4992
Cheers,
Allen

My up and down arrows as well as page up and page down no longer work properly only when using firefox. Page up and down function more like the "home" and "end" keys as do the arrow keys.

Honestly I'm not sure if these began just after I updated FF to the current release, but it's been happening for at least 2 weeks. The arrow keys and page up and page down keys all work as if I'm pressing the 'home' and 'end' keys on my keyboard. This is only when using FF. Please contact me if you need more clarification. Thanks in advance!

Sounds that you have switched on caret browsing.
* http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* http://kb.mozillazine.org/Accessibility_features_of_Firefox

Hp Laser Jet 1020 network printing fail over win7 and Vista

Printer prints fine when is connected to computer trough USB but when shared over the network between Vista or 7 and another PC tries to print. Jobs stays in the queue labelled 'Printing' but nothing happens.
Printing over the network only works when 'Print Spooler' is manually stopped and then restarted on the PC the printer is connected to for each job!
Printer used to work fine under XP with network sharing.
On local and networked PC, the printer use port "USB001"
Searching trough many forums i found this problem sill remains unsolved for 1020 and some other printers.
I have to admit that i had test all available versions of a driver.

Have you tried to setup the Local Port using, \\Win7Computername\Printername on the other computer?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Building blocks for incentive and commission management

Hi Gurus,
I am in need of building blocks for Incentive and commission management, I appreciate if anyone can provide me this above... .
thanks
chandra

hi
see ICM never goes independently,so you wonnt have any help on ICM alone,it works in collabvoration with different transactional data,like opportun ity and channel management.
try these links
http://help.sap.com/saphelp_crm60/helpdata/en/8d/ed100ab6ff425a92458921a551efcd/frameset.htm
http://help.sap.com/saphelp_crm60/helpdata/en/c6/b42d824113469aa04bf695e743c8f4/frameset.htm
best regards
ashish

Xrdp and Network Manager

Hi all.
I'm fairly new to Arch, been running Debian for a few years before.
I have a problem with Network Manager in KDE when connecting through xrdp to my VPN client machine (running in KVM). The applet is visible, but when I click it it's empty so I can't start/end a VPN session.
If I connect using X2Go, Network Manager displays my connections and I can start/end a VPN session.
If I first connect and logon using X2Go and then connect and logon to a new session with xrdp, I can use Network Manager within the xrdp session.
X2Go does something during logon (Xsession?) that xrdp doesn't. Does anyone know what might be the problem?
I've already updated org.freedesktop.NetworkManager.conf to allow "at_console = false" sessions to use Network Manager.

I've done some more troubleshooting and it looks like it's related to systemd. Logging on with xrdp does not seem to register with systemd, if I run "loginctl list-sessions" there are no sessions.
If I logon with SSH there is a session created and Network Manager works in any xrdp session started after the SSH session.
Unfortunately I'm not getting any further, I've fiddled around with PAM files to try to fix this but have failed so far. There's been a lot of trial and error with dbus, polkit, PAM, systemd and xrdp settings and I'm pretty much lost.
Unless someone with more knowledge than me can point me in the right direction I'm giving up, if anyone else has the same problem I have a simple workaround, just log in with SSH before connecting to xrdp and Network Manager will work (org.freedesktop.NetworkManager.conf has to be edited, see above).
Cheers,
Daniel

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and back

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and backing up data wirelessly via time machine.
I have a Mac Pro, iPhone 6, iPad, Apple TV and Time Capsule. No home Internet.
Is is possible to have my iPhone 6's wifi hotspot used to provide Internet to my wifi network on time capsule? Has anyone else had success doing this? I'm not a tech head and really know very little about things like this. Thanks. Jen

You can have a go using a wireless bridge.. eg the airport express will do this.. you can join it to the iphone wireless running as a hotspot.. and then plugged into the TC wan port.. the TC has to be setup in router mode.. so this is going to give you double NAT errors.. and of course errors for all the time the hotspot is turned off.. but it can work. However you might find it requires you to manually connect up each time.. If you are really going to try and do this you will manage it.. but how fiddly it becomes might put you off after a week.
You will chew up your 5GB very fast using any streaming media even radio. So be very careful to track the usage.
Apple should have built in the TC the ability to plug in a wireless 3G modem.. via the USB but Apple have ceased to do adventurous stuff.
If you give up the TC as main router there are plenty of better products on the market that will handle multiple wan connections.. !!

I'd like to debug and iPad problem joining a wireless network. Is there anyway to debug the network / system calls made while access an SSID?

We have multiple 802.1x networks, where iPads on occasion are unable to connect. There is no apparent contact by the 802.1x supplicant to join the network, and the usually the network settings both on the iPad and in the wireless systems works. So it doesn't appear to be configuration related. I'd like to debug the network protocol stack on the client, or look at iPad system logs to determine what is going on when an iPad refuses to join a network. Thanks

Yes they are centrally managed via cap/wap using PEAP/WPA1. The problem is that when this problem occurs none of that protocol is executed as far as I can tell. Hence digging into a debug log might provide a clue.

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you hel

Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.

Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.

1. Is your service multi-tenant? Can an enterprise manage their users and data independent of other enterprises using their service or is your service more like a consumer service Do you support any sort of enterprise identity? If so, do you support SAM

1. Is your service multi-tenant? Can an enterprise manage their users and data independent of other enterprises using their service is your service more like a consumer service ?
2. Do you support any sort of enterprise identity? If so, do you support SAML, openID or user provisioning APIs?
3. What level of audit logging do you perform? All read/write of data? Do you support ability for customers to view only their activity logs?
4. What level of penetration testing do you perform? Is it done by 3rd parties? How often are these tests performed?

1. Is your service multi-tenant? Can an enterprise manage their users and data independent of other enterprises using their service is your service more like a consumer service ?
2. Do you support any sort of enterprise identity? If so, do you support SAML, openID or user provisioning APIs?
3. What level of audit logging do you perform? All read/write of data? Do you support ability for customers to view only their activity logs?
4. What level of penetration testing do you perform? Is it done by 3rd parties? How often are these tests performed?

LRS and network analysis like shortest path

Does Spatial support/has function for network analysis, like fe. Shortest path?
Maybe via the LRS?
tx
Luc VAN LINDEN

Hi,
This feature is not supported using any Oracle Spatial primitives. It is possible to manipulate geometries and get this information, but you would need to write your own functions.

Networking? More like Notworking (Wicd and Network Manager Broken?)

Similar Messages

Maybe you are looking for