Networking OS 10.4.3 with OS 9.2

I'm trying to network my OS 10.4.3 computer with an OS 9.2 computer.
I have 3 computers on a routers. I have no problem networking with a computer with 10.3.9 but can't seem to get them to see the computer with OS 9.2. On the OS 9 computer I have Apple Talk turned on and enabled File Sharing.
I type in the OS 9 computer's IP address in the computer when using Go/Connect to server but I keep getting the Connection Failed message.
Anybody have any ideas what else I need to on the OS 9.2 computer?

Rick,
Great! Thanks! At first the specific checkbox was grayed out but after activating what I thought were some relevant extension and rebooting it worked.
My next step was to disable a shared folder and enable sharing for the entire hard drive. That worked too.
The only thing is I can't seek to access the desktop of that computer. Any tip on how to do that?
G4Dual800 OS10.3.9,1.25GB - - G5Dual2.3 OS10.4.3, 1.5GB   Mac OS X (10.4.3)  

Similar Messages

  • Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go?

    Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE

    http://support.apple.com/kb/TS3281

  • HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    hi
    could you tell us what the other app is please

  • ITunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

    I have my iTunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

    You can't connect directly to the external drive, but should be able to use iTunes Home Sharing via the laptop.
    http://support.apple.com/kb/PH1453

  • How do I network my Mac book pro with my Mac air?

    Hi - new at this Mac stuff: how do I network my Mac book pro with my Mac air? I am really looking to just share my photos from one to the other.

    Connect them both to the same router.
    They should show up in the left column of Finder under Shared.

  • Can you share photos between computers on a local time machine network.  I have iMac with lots of pictures I would like to view on my MacBook Air.  Does anyone know how to do this?

    Can you share photos between computers on a local time machine network?  I have iMac with lots of pictures I would like to view on my MacBook Air.  Does anyone know how to do this?

    Can you share photos between computers on a local time machine network?  I have iMac with lots of pictures I would like to view on my MacBook Air.  Does anyone know how to do this?

  • BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network

    I'm trying to create an "ExtraLarge" VM with multiple NICs.  The New-AzureVM returns the following error:
    BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network
    interfaces are not supported in the same deployment, also a virtual machine having no secondary network interfaces
    cannot be updated to have secondary network interfaces and vice-versa.
    But I have no other VMs.  Or at least I did and then deleted them and all their disks.  The service has no deployments (either staging or production).
    Why is New-AzureVM complaining about a mismatch of VMs with and without secondary network interfaces when no other VMs exist?
    I have tried many things to fix this, including the deletion of ALL of my resources.  I have deleted and created the service many times, both with an affinity group and without.  I have a screen print of the -debug output if your interested.
    Thanks for the outstanding help.

    Hi Ron,
    IMPORTANT NOTE: Please do not post the CONFIDENTIAL DETAILS ever on the public forums, this is HIGH RISK action.
    Please send an email with your contact details to my email
    [email protected] so that I guide you on steps which help you come out of the current scenario. Thank you for understanding.
    I suggest you to create a new VNET and new VM with cloud services. Create Multiple NIC VM. Let us know the results.
    Ref:
    http://azure.microsoft.com/blog/2014/10/30/multiple-vm-nics-and-network-virtual-appliances-in-azure/
    http://blogs.technet.com/b/canitpro/archive/2014/11/04/step-by-step-create-a-vm-with-multiple-nics-in-azure.aspx
    If you are unable to create a VM with multiple NIC, please open a support case as it requires more confidential information which is out of scope of FORUM support offerings.
    Regards,
    Girish

  • HT5439 Has anyone had the Network time and date error with Apple TV when traveling?

    Has anyone had the Network time and date error with Apple TV when traveling?

    Jasion,
    Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
    In addition to the (far greater) risk of file corruption, some issues are mentioned here:
    http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

  • Networking two NI lookout servers with different windows OS

    Can I networking two NI lookout servers with 50
    I/O, one with windows98 SE and one with Withows XP pro.?

    What's your lookout version on two computers? You need first to make two lookouts run, and then try to networking them. For example, if you run lookout 6.2 on windows 98, I'm not sure if it will work.
    Ryan Shi
    National Instruments

  • I have attempted to update my software over 10 times but I get a network connection error. Anyone with the same problem? Got it on the wireless and wired network.

    I have attempted to update my software over 10 times but I get a network connection error. Anyone with the same problem? Got it on the wireless and wired network.

    Disable all Firewalls & Anti-Virus software...try again.

  • I have an iPad 2 v6.1.3 that has a problem with connecting to wi-fi.  My other I macs have no problem with connecting.  The pad keeps coming up with unable to join the network. Nothing has changed with passwords--it just refuses to join my secure network.

    My other Imacs and my wife's Ipad 3 have no problem with conneccting.  My Ipad keeps coming up with unable to join the network.  Nothing has changed with passwords--it just refuses to join my secure network.  A couple minutes ago, it connected for 10 seconds, then dropped the connection.  Is there a way to reconfigure the Ipad to fix this major problem, as we dropped our carrier (saved a bunch of money) and just went wifi.
    Thanks so much for any help with resolving my connection problem.
    Gary

    Hello jaxgaryj,
    The following article provides a number of potential resolutions for your WiFi issues.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Cheers,
    Allen

  • I get no wireless signal in my home, so need a network extender for the Lumia 2520.  Specs indicate LTE FDD network:Band 20 (800MHz), Band 3 (1800 MHz), Band 7 (2600 MHz). Does Verizon offer a network extender that will work with the Lumia?

    I get no wireless signal inside my home, only outside, so I need a network extender that will work for the Lumia 2520, Specs indicate it uses LTE FDD netork Band 20 (800MHz), Band 3 (1800MHz), Band 7 (2600 MHz).  Does Verizon offer a network extender that will work with the Lumia 2520?

    We want to make sure you get service in your home Astromandata! I can check your area to see if you qualify for the network extender. What's your zip code? If it does qualify than you will be able to use it for your Lumia to support your voice services. Find out more information here: http://spr.ly/6585fNlt Is anyone else having this issue?
    AmberF_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • I am new to mac.  Do I need to store photos on the hard drive to use iPhoto or can I store pics on a network drive and still edit with iPhoto?

    I am new to mac.  Do I need to store photos on the hard drive to use iPhoto or can I store pics on a network drive and still edit with iPhoto?

    iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, exporting, saving edits and sharing the photos.
    See this article
    http://support.apple.com/kb/TS5168
    for more. Note also the comment:
    “Additionally, storing the iPhoto library on a network rather than locally on your computer can also lead to poor performance or data loss.”

  • Network is not the issue with 8.1.3 Update issue...

    Apple TV issues since 8.1.3 supposedly fixed connectivity issues and I was "told to trouble shoot network issues" as they appear from time to Time" been with AppLE since 1989 and believe me I tested all know issues in our totally AppLE network, even ran download test with Comcast.  Best we can tell 8.1.3 and the subsequent updates to Apple TV killed the streaming internally and makes the old 8.5 hrs (or some other ramdom number, usually in hours) to download issue to reappear.  We had no issues prior to this upgrade and now basically have limited access and as previously stated when you start a movie rental, it takes a bit but if it starts and crashes midway through the movie, if and when you can get it to restart it won't go back to the stopped point on Resume Play and if you can't get it restarted you are hosed in 24 hrs when the time expires.
    8.1.3 has a problem and like it or not it seems not to be widespread.  unfortunately there is no revert to previous version on Apple TV.... And no we are not using old equipment but products that are less than 3 months old and an Apple wireless hub.
    JUst want to call attention to this issue in case there might be an actual Apple developer or tech support guru listening.  Don't need some "did you troubleshoot your network" BS....

    If you have synced with iTunes before, I would download the update via iTunes in a first step and install it in a second step. That way you can be sure that the update data is complete and not corrupted during the download. The update size via iTunes is bigger, because you'll get the whole iOS downloaded and not just those parts that needed to be changed, as you get, when you download over Wi-Fi onto your phone.

  • I can not pair my I hphone 6 with my iPad bot are op to date with soft wear and I have tried to reset the network of both of them with no success

    i can not pair my I phone 6 with my iPad bot are op to date with soft wear and I have tried to reset the network of both of them with no success

    Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.

  • How do install the network adaptor for windows 7 with boot camp?

    How do I install the network adaptor for windows 7 with boot camp?

    boot camp forum: https://discussions.apple.com/community/windows_software/boot_camp 

Maybe you are looking for

  • Printing Suddenly Stopped

    My Canon i9900 just suddenly stopped printing from any computer in my home network. My MBP just started displaying all prior print jobs in the print queue, even those completed going back almost a full year. There was no way to clear the queue, so I

  • No X11 DISPLAY variable was set

    Hi, UCM 11g is installed in the unix server. I connected to the server thru putty and run the batch loader (/.BatchLoader.sh), im getting the below error. No X11 DISPLAY variable was set, but this program performed an operation which r equires it. at

  • How to execute entire result set of multiple sql statements via sp_executesql?

    I have a query that generates multiple insert statements (dynamic sql).  So when I execute this my result set is a table of sql insert statements (one insert statment per row in my source data table).  Like so:              Select 'INSERT INTO [dbo].

  • I can not update OS X mavericks, my macbook OS X lion 10.7.5

    i can not update OS X mavericks, my macbook OS X lion 10.7.5, when i install that show me This copy of the Install OS X Mavericks application can't be verified. It may have been corrupted or tampered with during downloading. i did that againt many ti

  • Address translation

    It seems like this would come up with any web server and also with just apache using rewrite rules. The question is, can I teach DW that the page I'm editing is at a particular web address? I'm trying to move from prototype.js and scriptaculous that