Networking problem while roaming
Hi all,
We have successfully loaded the app to the Rogers Motorola Mobilecomm phone. The service is not Sprint/ Nextel but Rogers in Western Canada. We are testing the phone here in So CA based on "roaming". We are having a problem where the network drops frequently despite having a very strong signal. Is this related to the roaming issue.
Bharani
Hi all,
We have successfully loaded the app to the Rogers Motorola Mobilecomm phone. The service is not Sprint/ Nextel but Rogers in Western Canada. We are testing the phone here in So CA based on "roaming". We are having a problem where the network drops frequently despite having a very strong signal. Is this related to the roaming issue.
Bharani
Similar Messages
-
Problems while roaming since last update of an iPhone 5
Since last update the phone loses signal intermittently while a regular phone in the same network/account has a steady, strong signal. I've reset network settings and since it didn't work I did a hard reset, erasing and restoring the phone. The problem persists
Hey Manuel Flores-Arce,
Thanks for the question. Based on what you stated, it seems like the iPhone is having a service issue while roaming. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
iPhone and iPad: Using cellular networks while in another country - Apple Support
iPhone cellular data connection issues - Apple Support
If you see No Service in the status bar of your iPhone or iPad - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario -
Help with Boot Camp Assistant network problem while downloading windows support system!
I need to download Windows support software, but just keep encountering a problem which says "Can't download Windows Support Software because of a network problem." What should I do? I'm currently using Boot Camp Assistant v5.0.0, and OS X 10.8.2. Help! What can I do to solve this network problem? Please and thank you (:
I have the same problem. Anyone out there? Hello?
-
Ipad in WDS network: problems with roaming
We have a WIFI-network with several remote wifi-stations. Using an iPad, we have problems when moving within the network to pick up the stronger signal from a close-by station. Instead, the iPad keeps the previous station till it gets so week it drops the connection.
It looks, we had a problem with 3.0, then it seemed to become much better in iOS 3.2, now with 3.3. it got bad again.
Any experience or better idea how to get a reliable connection when moving within the wifi-network-area?you did not say what router you are using. i am asuming you have 2 apple airport base stations, one named lab1 and the other is lab2.
if you want your ipad to steer to the nearest base station you need to run an ethernet cable between lab1 and lab2 on lab1 you set airport utility to "allow this network to be extended" and on lab2 yoiu run airport utillity and set it to "join an existing network", there should be a setting there"connect with ethernet".. once this is properly setup, the ipad should automatically steer to the access point that has the strongest signal
also on lab2, you want to set it to ""allow wireless clients". if that is not checked, then the ipad cannot join it.
if you are not using apple airport extremes or apple airport expresses in your network, then your probably posting on the wrong forum. and you would need to go to that manufactures website to see how to setup their wireless routers to wds. -
Software upgrade while roaming
I couldn't find any reference to this, and while at first the answer seems intuitive, the more I think it about it the more uncertain I become: can I upgrade my iPhone 3G to 3.0 while roaming? I have upgraded to iTunes 8.2 and would be using an Internet-enabled computer so I think that it should be OK and that any (re)registration of my iPhone 3G will be fine, but on the other hand.....
Anyone offer some certainty on this please? Many thanks!gordiasUK wrote:
Wifi from my own internet home network. My premise is that the cellular network is incidental to registration rather than a requirement - it's iTunes that activates it, after all. Plus even when roaming the iPhone is "known" to the home network, O2 in this case.
Of course, theory and practice can differ, and I am far from keen to be a guinea pig in this - at least if there do turn out to be issues with 3.0 I will be one of many, rather than in a painfully small minority if I have reactivation problems while roaming!
If you are using O2 to connect to your cpu and create an internet connection that will be expensive to do. I would wait til you get back to the UK. -
im facing problem while trying to update my iphone 4 from version 4.3.1 to iOS 5. While processing the downloaded 774mb file, it comes with the statement that the network connection timed out. why???
i have been dealing with this same issue, tried to turn off firewall and even turn of antivirud but still it gave me the same error.
-
I use iPhone 4S .earlier with ios 6 and now ios 6.while I connect the charger for charging my phone network lost while midway in charging.that problem always while 3G connection is active.but this problem not arise while 3G mode off.please help me.
reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if issue persists back up and restore as new via iTunes
Peace, Clyde -
I have both iPhone 3G and 3Gs, and everytime I took them traveling outside the country, the phone works normally using international roaming.
Unfortunately both 3G and 3Gs got "No Network" everytime I got back to my own country. I tried switching them off and on again repeatedly, but still got "No Network" messages. I had to reset to previous setting to make them get signal again. One time after coming back from Japan, one of my iPhone worked but still have "DoCoMo" instead of my country own network.
Does anyone have similar problem?Yes , I live in SG and travel frequently to Malaysia and i face this issue EVERYTIME whenever there is a switch in network while roaming. I have to manually switch network when in another country and when I'm back to my home country. I see this problem on OS3 and now after upgrading to OS4 am STILL seeing this issue.
Have some experience in GSM Protocol and my suspicion is that Apple needs to work with their GSM/WCDMA protocol stack provided to iron this out.
Apple..comments?? -
Activesync - long delays in email delivery while roaming / local activesync log on BB10-device?
Hi,
A couple of our users are experiencing serious delays in email delivery on their BDS-controlled Z10s while roaming. With "serious" I mean delays in the magnitude of hours. This is something however that purely relates to Z10 and the way message sync is done (activesync)
Since we've got both legacy (OS7) devices and BB10-devices on our network I can confirm that email delivery on the legacy devices happens instantly while BB10-devices experience the above mentioned delays when roaming.
So here are my questions:
Anybody else experiencing this problem (I saw a post under BB10 automatic sync not working while roaming in US mentioning US roaming problems, but in our case it's Europe and travelling between European countries)
Is there a way to get an activesync-log from the Z10s itself showing dates/times of activesync and error-messages respectively? (Afaik the phone has an end-to-end-connection to the activesync/exchange server) - on other platforms (IOS, Androids) you can find a local activesync log on the smartphone so I'm positive that something like this must be present on BB10 too.
Any known cure - or at least an idea how to track this down?
Thanks much in advance for any clue
-bblacksheepI don't know if my situation is related or not, but I have (since Friday) been experiencing delays with Gmail on my Z10. However, it's not universal. I have 9 Gmail accounts, and only a subset are affected by delays, while others receive everything immediately. They are all integrated via ActiveSync, and delivery elsewhere (e.g., Outlook client, Gmail webmail inteface) is not affected.
If the problem affected all of my Gmail accounts the same, I might believe that the problem is with BB or my carrier services. But, since it's only affecting a subset, I instead believe my issues to be rooted at Google. Given all they have recently done to alienate the BB platform, I'm actually not terribly surprised either.
Note that no roaming is involved...this is on home network carrier and also almost completely on WiFi. No changes have been made to the configuration...but this behavior started suddenly on Friday. Eventually, everything gets delivered and reconciled...but on some accounts, the delay is quite large.
If your issues can be narrowed down so as to truly know a root cause, and that root cause results in being something in the BB device, OS, or infrastructure, then you need to contact your mobile service provider for formal support and potential escalation up to BlackBerry for enhanced support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Severe problem while starting Lenovo 3000 N200
Dear friends & experts,
I am using Lenovo 3000N200 0769BDG laptop. I have following problems while starting the system.
Recently my system was hacked against which I installed an Anti-Malware software. It showed that the system was free from any Malware.(But believe me, it is true that the system was hacked.). But each time on starting the system, a black and white window is being displayed which contains the following message:
We apologize for the inconvenience, but Windows didnot start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed , or if you aren't sure what caused the problem, choose Start Windows Normally.
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration (your most recent settings that worked)
Start Windows Normally
Use the up and down arrow keys to move the highlight to your choice.
Seconds until Windows starts:30.....1
After 30 seconds, the Windows logo is displayed immediately followed by a Blue screen which lasts for 1 second and the system restarts. I tried all the options listed above-- from Safe Mode to Start Windows Normally but the same problem recurrs. And the system doesn't shutdown until I press the power button.
I have a licensed version of Windows Xp SP3 as OS. I tried to repair the system using WinXP CD but I found the following message:
Setup did not find any hard disk drives installed in your computer.
Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.
Setup cannot continue. To quit Setup, press F3.
A point to be noted is that earlier, I removed the Rescue & Recovery from my system thinking that it might not be of much use and now, I lament for it.
When I press F3 the same window appeared and the same problem recurred.
I tried to access the files in my hard disk using Ubuntu CD and it was successful. I used Lenovo hardware quick test to check for any hardware faults, and my system passed all the tests.
I request you to help me in solving this problem so that I can continue my studies peacefully.
Thanking you,
With regards,
T.I. KiranFirst off, being "hacked" and having viruses/malware are two different things. Someone hacking your computer doesn't really mean you have a virus/malware, it means an actual person gained access to your computer remotely and did something to it.
More than likely you got a virus that corrupt your Windows System directory and/or registry. Anti-malware software won't necescarily detect all viruses, especially executable that run commands to simply delete files.
The blue screen you're seeing is what us technicians call the BSOD (blue screen of death), it's an indication that there is a direct corruption with the core files that Windows requires to function properly.
As an IT Technician, if this were one of my laptops or one of my end-users, I would simply reload it with a fresh copy of Windows XP. There's a possiblity that all data you had on the laptop is gone because if the Windows core files are corrupt/missing, then that could very well mean your system was wiped completely but the boot table is in tact, hence the fact that you even have the option to boot Windows XP.
One other option I would suggest is try to reinstall Windows XP. Sometimes if you have the right copy of the install, it will let you reinstall the Windows XP core files, leaving your programs, files and directories in tact.
Good luck. -
Network problem with one particular iMac in a home network
I want to report a problem involving one particular iMac (2008 Al 24").
On my home network (Apple Airport Extreme and Express extensions, about five Macs and couple of iDevices), all other Macs can see and connect to each other as well as printing to the networked Brother printer without problem.
However, on one particular iMac, I can see all other Macs, can set Brother printer as default with green dot next to it in Print Preference Pane, but I can not connect to other macs, nor print to the printer. Meanwhile, the iMac can get on the internet without any problem. I checked Share Preference Pane and all settings are same as other macs.
The iMac used to work flawlessly until recently, and I first noticed the problem because I could not print, getting a message the printer can not be found (and the dots turn yellow for a while then went back to normal green). Then, I found neither the iMac, nor other macs on the network can connect to each other, even though I can see all of them in Finder.
I opened Apple Remote Network on my own mac, and I can see and connect all other shared macs, but this iMac's status showed not online, even though the IP adress is valid. As a results, no other macs can connect to the iMac, either. It seems to be a problem with the intranet only, not internet.
One more thing, about a month ago, the iMac popped out a warning about network name, saying the old name was in use (conflict) in the network, so I have to change it in Share Pane. Not sure if this is related to the intranet problem.
Reboot and repaired permission several times, no change. Hate to reinstall everything. Any help would be greatly appreciated.Another update:
For unknown reason, my iMac was suddenly back onto the home "intranet". It can be accessed by my MacBook Air through Finder Connect, and can also be seen by Apple Remote Desktop.
However, printing is still a problem while other macs have no problem printing to the same printer. Whenever I send a print task, either Word document, or other programs such as GraphicConverter image, the iMac tried to connect to the default printer, but failed, and wanted to try again in 30 seconds 9and continued to fail). Meanwhile, the green dot next to the printer selection turned to yellow in Preference Pane. But as soon as I cancel the print job, the printer status went back to normal green.
The printer is a Brother color laser HL-4070CDW, connected through wireless (g only), with it own DHCP but specific IP address. I printed out a setting for the printer and all looks normal, and all other macs can print to it without problem. Other macs can also get access to the printer profile, and check inks copy counts, etc, but the iMac cannot.
Only thing changed since last post was a new update for Apple Airport firmware (to 7.5.2 I think). So my problem is still half solved: can connect to other macs on the same network, but still not be able to print. -
Time Machine and Time Capsule - Failing with Network Problem
My problems with TM/TC have been ongoing for a couple of months now and I am going round in circles - need help.
This is the second post I have made, the first got lost in people suggesting the obvious - so I will try to be a little more specific if I can.
I will detail the current state first - i.e. where I am now - after I will list what I have done so far to get to this point.
Currently, my iMac (intel) is directly connected by Ethernet 1GB to the Time Capsule. The TC is then connected to a Netgear router which in turn is connected to Internet.
I have no network problems at all - internet connection is fine. the Netgear Router has the latest firmware version and is working fine. The porblems i have are nothing to do with this.
The time Capsule is in Bridge mode and getting a reserved dhcp IP address from the Netgear router.
The Time Capsule has been fully reset - i.e. power cable out, hold the reset button, plug in power cable (spark, spark), hold reset button, fast blink for 20 seconds or so, light goes out, release button.
I have re-applied the latest Time Capsule firmware.
I have renamed the disk on the Time Capsule.
I have renamed my iMac and deleted all the time capsule entries from Keychain.
I have re-installed Mac OSX and re-updated to the latest 10.5.6 release.
At the moment I have kicked off a backup with a lot of large files - like music folder, video folder etc excluded. I also have parallels and have excluded the disk image. I have 1 other 50GB disk image which is also excluded.
I am expecting the first initial backup will complete successfully.
I will then remove music and video from exclusions and allow them to backup. I am expecting this will complete no problem. (I do this because the upcoming problem will happen if I move away from the machine - and I dont want to sit there for 2 days).
So up to this point TM and TC have performed flawlessly. The issue that follows started happening before the 10.5.6 update after backing up with no issues for months. At this point I will be able to use TM to browse the backup and restore files. I will be able to mount the sparse bundle and browse files. Spotlight reports no issues and indexes quickly.
If I leave my machine after a successful backup and the hourly update kicks in it will fail with 'A Network problem' basically saying the backup has filed because of a network problem, but is not any more specific, logs show far too much to put the whole thing here, but the following is an excerpt
Dec 23 05:19:49 MickMac /System/Library/CoreServices/backupd[1499]: Backup destination mounted at path: /Volumes/Backup
Dec 23 05:19:50 MickMac hdiejectd[1519]: running
Dec 23 05:19:51 MickMac kernel[0]: jnl: disk1s2: replay_journal: from: 28864512 to: 30084096 (joffset 0x1d0f000)
Dec 23 05:21:49 MickMac kernel[0]: jnl: disk1s2: journal replay done.
Dec 23 05:21:49 MickMac /System/Library/CoreServices/backupd[1499]: Disk image /Volumes/Backup/MickMac_001ec215ce76.sparsebundle mounted at: /Volumes/Backup of MickMac
Dec 23 05:21:49 MickMac /System/Library/CoreServices/backupd[1499]: Backing up to: /Volumes/Backup of MickMac/Backups.backupdb
Dec 23 05:21:49 MickMac com.apple.launchd[1] (com.apple.netauth.sysagent[1500]): Stray process with PGID equal to this dead job: PID 1503 PPID 1 check_afp
Dec 23 05:21:55 MickMac fseventsd[38]: event logs in /Volumes/Backup of MickMac/.fseventsd out of sync with volume. destroying old logs. (3627 125 5482)
Dec 23 05:27:33 MickMac /usr/sbin/ocspd[1539]: starting
Dec 23 05:30:27 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 5 reqID 5400 flags 0x9 afpCmd 34 so 0x7e78cc0
Dec 23 05:30:27 MickMac kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x7e78cc0
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Backup prevTrigger 0 currTrigger 1
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot -1 error 89 reqID 1 flags 0x9 afpCmd 0 so 0x7e78cc0
Dec 23 05:31:26 MickMac KernelEventAgent[34]: tid 00000000 received VQ_DEAD event (32)
Dec 23 05:31:26 MickMac KernelEventAgent[34]: tid 00000000 type 'afpfs', mounted on '/Volumes/Backup', from 'afp_0V1fqC1mgalO00mE1H0Pyetl-1.2d00000a', dead
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Open Session failed 57 /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: max reconnect time reached 60 > 30 /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: posting to KEAType IO] [ErrNo 5] [IOType Read] [PBlkNum 1248] [LBlkNum 155] [FSLogMsgID 501572642] [FSLogMsgOrder First]
Dec 23 05:31:26 MickMac kernel[0]:
Dec 23 05:31:26 MickMac fseventsd[38]: failed to unlink old log file /Volumes/Backup of MickMac/.fseventsd/0000000000ccb02b (Input/output error)
Dec 23 05:31:26 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED)."
It goes on and on and is repeated every hour. For each one I get an error message on screen saying backup failed due to a network error. However I have tried a manual download over the same period set at an extremely slow rate so that it was downloading during this time and it showed no errors. I.e. the network connection from imac, through TC to netgear and out to internet - and monitored this while time machine showed these errors (i.e. at the same time) and this showed no connection problems at all and completed succesfully.
I know TM uses an internal address to do backups, but uses the same cable and network card to get the job done. I am simply removing the cable as a source of issue although I have also replaced this making no difference.
Applecare are involved and have so far been sent 2 sets of logs and so far have not been able to find the cause. New TC is on its way to try that, although they think it is something on the imac that is causing this.
Sleep mode is turned off although screen sleep is on. The tick is not in the box for putting hard drives to sleep whenever possible.
Now, after this has happened, and back at the machine. I restart both imac and TC. Try running a backup, spotlight starts to re-index - i.e. will mount the backup volume and start the index process, gets to about 90% then fails - again excerpts from log
"Dec 23 09:18:50 MickMac /System/Library/CoreServices/backupd[161]: Backing up to: /Volumes/Backup of MickMac/Backups.backupdb
Dec 23 09:18:50 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexCI in ContentIndexOpenBulk:Unclean shutdown of /Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/li ve.0.; needs recovery
Dec 23 09:18:57 MickMac com.apple.launchd[67] (com.apple.netauth.useragent[147]): Stray process with PGID equal to this dead job: PID 152 PPID 1 check_afp
Dec 23 09:19:48 MickMac mds[32]: (Error) Server: machmsgdispatch: (ipc/send) invalid destination port [msgh_id 14016]
Dec 23 09:29:35 MickMac /usr/sbin/ocspd[197]: starting
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 11 reqID 3204 flags 0x9 afpCmd 60 so 0x8051b28
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 12 reqID 3205 flags 0x9 afpCmd 34 so 0x8051b28
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x8051b28
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Backup prevTrigger 0 currTrigger 1
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Logging in with uam 10 /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Restoring session /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot 11 error 35 reqID 3204 flags 0x19 afpCmd 60 so 0x8051b28
Dec 23 09:42:49 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot 12 error 35 reqID 3205 flags 0x19 afpCmd 34 so 0x8051b28"
And later....
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x39 (UNDEFINED).
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 received VQ_DEAD event (32)
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: hfs_clonefile: cluster_read failed - 5
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 type 'afpfs', mounted on '/Volumes/Backup', from 'afp_0V1fqC1mgalO00mE1H0Pyetl-1.2d000005', dead
Dec 23 09:45:49 MickMac kernel[0]: HFS resolvelink: can't find iNode791959
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x39 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]: ore-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431/store.db] [FSLogMsgID 1580919258] [FSLogMsgOrder Last]
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 found 1 filesystem(s) with problem(s)
Dec 23 09:45:49 MickMac kernel[0]: jnl: disk1s2: dojnlio: strategy err 0x5
Dec 23 09:45:49 MickMac kernel[0]: jnl: disk1s2: end_transaction: only wrote 0 of 49664 bytes to the journal!
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexSDB in dbcheckdatastore:store.db : dbgetdatastore: ERR: could not read 4096 bytes
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexCI in CIMetaInfoSync:write err: 5
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexSDB in adddirtychunk:/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/st ore.db : ERR: Can't write DST header (Input/output error)
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexSDB in dbflushdatastore:/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/st ore.db : dbsyncdatastore: write-errors flushing cache/writing map.
Am I the only one having these problems? any help from anybody please...Got the same problem with a 3 months old TC.
The replacement TC, does it work now flawless? -
Time Machine couldn't complete the backup due to a network problem
Firstly apologies for the long post, I've been bottling these problems up and could now use some expert advice.
I have a MacPro (10.6.3) with four internal drives (320GB system/apps. + 3x 750GB data, images etc) and a MacBook Pro (10.6.6) with a 320GB internal. With so much accumulated data (Mac user since SE FDHD) I wanted a reliable means to backup all my projects, books, papers, research, images etc. I had several bad experiences using Iomega drives (Ultramax and Storcentre) which were not very Mac compatible and shifted over to a 10TB LaCie 5Big Network 2 which is promoted as Time Machine compatible. Set up Time Machine (with a few hiccups) in Sept 2010 and it ran perfectly, backing up both main computers until March 2011. I have now experienced a string of problems backing up the MacPro, some of which have been resolved speaking to people, some by checking forums and some by using my own noddle to figure it out. The latest error message I am getting is "Time Machine couldn't complete the backup due to a network problem. Make sure your computer and the backup disc are on the same network, and that the backup disc is turned on. Then try again to back up."
The circumstances of this are as follows: TM seems to be trying to completely back up everything already backed up from previous months so I am using the "exclude" option to do this in manageable chunks (5.54TB of 7.99TB is available so there is a lot of stuff on there, hence my reticence to erase and start again). I started a backup last night which said it was 242GB and when I came back hours later (I estimate 30GB and hour or 500MB a minute) it has failed with the error message above. I asked it to back up again and it said it now had 191GB to backup, at the next failure it was 142GB, dropping by approx 50GB a time (if there a maximum it can manage in one go?), the next time it was starting again with 242GB.
I checked the disc it was backing up to, discovered it was now selecting Public-1, re-selected Public which houses the macpro.sparsebundle, dropped the backup size (Options) to 73GB and set it off again and it is backing up as I write. I am hoping it will complete and permit another chunk to be backup but the fact it looses network connection (seemingly) or has a maximum backup in one go, is annoying because it means you cannot leave it overnight and trust it to do the backups.
The other problem seems to be a shut down by LaCie 5Big because several times (and once this morning) I have had this message "The file server "LaCie 5Big" has closed down, followed by a complete Lacie shut down and auto-reboot with all lights and whistles. Lacie think this could be a power supply problem and say they are sending me another power brick. They also say they do not support Time Machine (they should check their own literature) and suggest I use LaCie 5Big for 'drag and drop' backup. If I wanted to do that I could pick up a cheap and nasty HD from PCWorld, not this high end 10TB drive which cost over £1,000 !
For a while y'day I could not even find the Lacie on the network but after changing the ethernet cable from Lacie to router (Linksys) it miraculously re-appeared so that problem may have been the original Lacie blue ethernet cable had developed a fault. Checking cables is an oft-overlooked option.
A catalogue of errors, some solved, others still all pervading, so any words from the wise would be gratefully accepted.I verified the macpro.sparsebundle and Time Machine backups in Disk Utility and it said both appeared to be Okay in green type. So that did not solve the issue. I did a Disk Utility repair a day or so again (despite Verify saying everything was fine) and said there was nothing to repair. I suspect two problems, the power brick may be faulty producing intermittent power and maybe causing the drive to close down (hopefully Lacie will send me a replacement to try) and second, I am thinking the network connection is getting dropped causing crashed backups without the Lacie shutdown/reboot sequence. The 73GB back up failed, I started it again at 54GB and it failed again, just started it again at 45GB - this is no way to progress!
Perhaps the relatively new (last year) Linksys router is the problem, I find my MBP says AirPort is active but it fails to appear in Go>Server unless I switch it off and on again and perhaps a similar problem drops the connnection to the Lacie. -
Facing Problem while Installaing SAP NW PI 7.0 on Oracle Database
Hello Friend,
Ultimately I come here to take the global help.
We are trying to Install SAP NW PI 7.0 on Windows 2003 Server Enterprise Edition x64, with Oracle 10.2 - 64bit Edition.
On this host, we already have installed SAP NW CE 7.1 with the same Oracle 10.2
SAP NW CE 7.1 is working fine on this Host.
First, we tried to install SAP NW PI 7.0 with jdk 1.4.2.16(32 bit), which was giving the error, while installation using SAPInst. So We installed jdk 1.5.0.15 (64 bit), at own risk. But, the Installation was interrupted due to some unknown error something like "SDM failed to deploy some components...etc....etc.". So, we installed jdk 1.6.0.6( which is perfect for Windows x64). With this , jdk 1.6.0.6 the last problem did not come and we reached at 9th step (of total 98th step of SAP NW PI 7.0 Installation), and was at "Prepare to install minimal Configuration", and controling START and STOP of System. Bu We found that, the System was not able to even start, at that 95th Phase.
After that, we did lot of R&Ds to come out from the trouble.
I am attaching the requied TRACE files, they are as followed.
dev_disp.
%%%%%%%%%%%%%START of dev_disp%%%%%%%%%
trc file: "dev_disp", trc level: 1, release: "700"
sysno 02
sid PI1
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3132
Thu May 08 16:50:32 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (02 3132) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3902
Thu May 08 16:50:36 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >vcerp99_PI1_02 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE70050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000EE70050
DpShMCreate: allocated wp_adm at 000000000EE72150
DpShMCreate: allocated tm_adm_list at 000000000EE783A0
DpShMCreate: allocated tm_adm at 000000000EE78400
DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
DpShMCreate: allocated comm_adm at 000000000F3E3FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
DpShMCreate: allocated gw_adm at 000000000F46ACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F46ACE0
DpShMCreate: allocated wall_adm at 000000000F46ACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 3966MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 3968MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 991 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 704
argv[0] = D:\usr\sap\PI1\DVEBMGS02\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PI1\DVEBMGS02\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PI1\SYS\profile\PI1_DVEBMGS02_vcerp99
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=02
argv[6] = -DSAPSYSTEMNAME=PI1
argv[7] = -DSAPMYNAME=vcerp99_PI1_02
argv[8] = -DSAPPROFILE=D:\usr\sap\PI1\SYS\profile\PI1_DVEBMGS02_vcerp99
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( vcerp99) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >vcerp99_PI1_02 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Thu May 08 16:50:37 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 144
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Thu May 08 16:50:39 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 184
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3822) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=704)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu May 08 16:51:16 2008
ERROR => DpHdlDeadWp: W0 (pid 4316) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 1536) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 3388) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 3980) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 2980) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 4164) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 4656) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 4516) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W8 (pid 2576) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W9 (pid 960) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W10 (pid 3764) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W11 (pid 636) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W12 (pid 3896) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 4696) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W14 (pid 4072) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W15 (pid 4808) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W16 (pid 2832) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:26 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu May 08 11:21:26 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4316 Ended no 1 0 0
1 DIA 1536 Ended no 1 0 0
2 DIA 3388 Ended no 1 0 0
3 DIA 3980 Ended no 1 0 0
4 DIA 2980 Ended no 1 0 0
5 DIA 4164 Ended no 1 0 0
6 DIA 4656 Ended no 1 0 0
7 DIA 4516 Ended no 1 0 0
8 DIA 2576 Ended no 1 0 0
9 DIA 960 Ended no 1 0 0
10 UPD 3764 Ended no 1 0 0
11 ENQ 636 Ended no 1 0 0
12 BTC 3896 Ended no 1 0 0
13 BTC 4696 Ended no 1 0 0
14 BTC 4072 Ended no 1 0 0
15 SPO 4808 Ended no 1 0 0
16 UP2 2832 Ended no 1 0 0
Dispatcher Queue Statistics Thu May 08 11:21:26 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Thu May 08 11:21:26 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu May 08 11:21:26 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:31 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >vcerp99_PI1_02 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (5080) (SOFT_KILL)
Stop icman
killing process (1036) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:5080 HANDLE:304)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:32 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:5080 HANDLE:304)
wait for end of icman
[DpProcDied] Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:33 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:34 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:35 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:37 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:38 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:39 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:40 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:41 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:42 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:43 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1036 HANDLE:312)
[DpProcDied] Process died (PID:704 HANDLE:288)
DpStartStopMsg: send stop message (myname is >vcerp99_PI1_02 <)
NiIMyHostName: hostname = 'vcerp99'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu May 08 16:51:44 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 212 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 212 (pos=3)
SiSelNRemove: removed sock 212
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 212
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3132) [dpxxdisp.c 10421]
Good Bye .....
%%%%%%%%%%%%%%END of dev_disp%%%%%%%%%
dev_w0
%%%%%%%%%%%%%%START of dev_w0 trace file%%%%
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu May 08 16:50:37 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\PI1\DVEBMGS02\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\PI1\DVEBMGS02\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\PI1\DVEBMGS02\exe\dboraslib.dll' is "700.08", patchlevel (0.144)
B New connection 0 created
M sysno 02
M sid PI1
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 4316
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4316) [dpxxdisp.c 1305]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 25168 (1480)
M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010E70050, size: 6348592)
M DpShMCreate: allocated sys_adm at 0000000010E70050
M DpShMCreate: allocated wp_adm at 0000000010E72150
M DpShMCreate: allocated tm_adm_list at 0000000010E783A0
M DpShMCreate: allocated tm_adm at 0000000010E78400
M DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
M DpShMCreate: allocated appc_ca_adm at 00000000113E2060
M DpShMCreate: allocated comm_adm at 00000000113E3FA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001146AC30
M DpShMCreate: allocated gw_adm at 000000001146ACB0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000001146ACE0
M DpShMCreate: allocated wall_adm at 000000001146ACF0
M
M Thu May 08 16:50:38 2008
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host vcerp99
M
M Thu May 08 16:50:39 2008
M calling db_connect ...
C Prepending D:\usr\sap\PI1\DVEBMGS02\exe to Path.
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 00000000138E8FA0 00000000138F11D0 000000001390D9F8
C Attaching to DB Server PI1 (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
C Starting user session (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8,usrhp=00000000138F19E8)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
[dboci.c 4532]
C Detaching from DB Server (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 11044]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 00000000138E8FA0 00000000138F11D0 000000001390D9F8
C Attaching to DB Server PI1 (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
C Starting user session (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8,usrhp=00000000138F19E8)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
[dboci.c 4532]
C Detaching from DB Server (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 11044]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#5 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#5 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10468]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server vcerp99_PI1_02 on host vcerp99 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu May 08 16:50:39 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10688
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4316) [dpnttool.c 327]
%%%%%%%%%%END of dev_w0 file %%%%%%%%%%%%
trans.log
%%%%%%%%%%%%START of trans.log %%%%%%%%%
4 ETW000 r3trans version 6.14 (release 700 - 14.02.08 - 14:55:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 08.05.2008 - 17:07:15
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Thu May 08 17:07:17 2008 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 79007 0.079007
4 ETW000 [dev trc ,00000] using "D:\usr\sap\PI1\SYS\exe\uc\NTAMD64\dboraslib.dll"
4 ETW000 25 0.079032
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 11 0.079043
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 254 0.079297
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.144)
4 ETW000 27697 0.106994
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 21 0.107015
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 24 0.107039
4 ETW000 [dev trc ,00000] New connection 0 created 18 0.107057
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.107089
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 14 0.107103
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 13 0.107116
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 17 0.107133
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 7122 0.114255
4 ETW000 [dev trc ,00000] Thu May 08 17:07:18 2008 252994 0.367249
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.2.0' 21 0.367270
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 12 0.367282
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 191178 0.558460
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 22 0.558482
4 ETW000 [dev trc ,00000] Connecting as /@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 20 0.558502
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 7651 0.566153
4 ETW000 [dev trc ,00000] 0 UTF8 1 0000000007534090 000000000030DF10 00000000003136D8
4 ETW000 77 0.566230
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 9578 0.575808
4 ETW000 [dev trc ,00000] Allocating server context handle 29 0.575837
4 ETW000 [dev trc ,00000] Attaching to DB Server PI1 (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
4 ETW000 48 0.575885
4 ETW000 [dev trc ,00000] Assigning server context 00000000075530E8 to service context 0000000000313598
4 ETW000 161629 0.737514
4 ETW000 [dev trc ,00000] Allocating user session handle 6490 0.744004
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8,usrhp=000000000030E728)
4 ETW000 39 0.744043
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
4 ETW000 130057 0.874100
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=00000000075530E8)
4 ETW000 16 0.874116
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
4 ETW000 16 0.874132
4 ETW000 [dev trc ,00000] Deallocating server context handle 00000000075530E8
4 ETW000 313 0.874445
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1033'
4 ETW000 9357 0.883802
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1033 13 0.883815
4 ETW000 [dev trc ,00000] Try to connect with default password 48 0.883863
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 15 0.883878
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 16 0.883894
4 ETW000 [dev trc ,00000] 0 UTF8 1 0000000007534090 000000000030DF10 00000000003136D8
4 ETW000 19 0.883913
4 ETW000 [dev trc ,00000] Allocating server context handle 9 0.883922
4 ETW000 [dev trc ,00000] Attaching to DB Server PI1 (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
4 ETW000 26 0.883948
4 ETW000 [dev trc ,00000] Assigning server context 00000000075530E8 to service context 0000000000313598
4 ETW000 7460 0.891408
4 ETW000 [dev trc ,00000] Assigning username to user session 000000000030E728
4 ETW000 19 0.891427
4 ETW000 [dev trc ,00000] Assigning password to user session 000000000030E728
4 ETW000 27 0.891454
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8,usrhp=000000000030E728)
4 ETW000 72 0.891526
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
4 ETW000 37125 0.928651
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=00000000075530E8)
4 ETW000 16 0.928667
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
4 ETW000 16 0.928683
4 ETW000 [dev trc ,00000] Deallocating server context handle 00000000075530E8
4 ETW000 313 0.928996
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1033'
4 ETW000 18 0.929014
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1033 9 0.929023
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 1033 performing CON [dblink#5 @ 431]
4 ETW000 14700 0.943723
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-01033: ORACLE initialization or shutdown in progress [dblink#5 @ 431]
4 ETW000 15 0.943738
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'PI1'"
%%%%%%%%%%%END of trans.log %%%%%%%%%%%%%
alert_pi1.log
%%%%%%%% START of alert_pi1.log %%%%%%%%%%%
Dump file d:\oracle\pi1\saptrace\background\alert_pi1.log
Wed May 07 14:36:54 2008
ORACLE V10.2.0.2.0 - 64bit Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 2 - type 8664, 1 Physical Cores
Process Affinity : 0x0000000000000000
Memory (Avail/Total): Ph:2774M/3966M, Ph+PgF:17617M/18761M
Wed May 07 14:36:54 2008
Starting ORACLE instance (normal)
Wed May 07 14:36:55 2008
Specified value of sga_max_size is too small, bumping to 662700032
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 80
sessions = 96
event = 10191 trace name context forever, level 1
sga_max_size = 662700032
shared_pool_size = 314572800
shared_pool_reserved_size= 31189893
filesystemio_options = setall
control_files = F:\ORACLE\PI1\ORIGLOGA\CNTRL\CNTRLPI1.DBF, F:\ORACLE\PI1\ORIGLOGB\CNTRL\CNTRLPI1.DBF, D:\ORACLE\PI1\SAPDATA1\CNTRL\CNTRLPI1.DBF
control_file_record_keep_time= 30
db_block_size = 8192
db_cache_size = 314572800
compatible = 10.2.0
log_archive_dest = G:\oracle\PI1\oraarch\PI1arch
log_buffer = 6139904
log_checkpoint_interval = 0
db_files = 254
log_checkpoints_to_alert = TRUE
dml_locks = 4000
replication_dependency_tracking= FALSE
undo_management = AUTO
undo_tablespace = PSAPUNDO
inmemory_undo = FALSE
undo_retention = 43200
recyclebin = off
remote_os_authent = TRUE
remote_login_passwordfile= EXCLUSIVE
job_queue_processes = 1
parallel_execution_message_size= 16384
tablelookup_prefetch_size= 0
background_dump_dest = D:\ORACLE\PI1\SAPTRACE\BACKGROUND
user_dump_dest = D:\ORACLE\PI1\SAPTRACE\USERTRACE
core_dump_dest = D:\ORACLE\PI1\SAPTRACE\BACKGROUND
sort_area_size = 2097152
sort_area_retained_size = 0
db_name = PI1
open_cursors = 800
sortelimination_cost_ratio= 10
btree_bitmap_plans = FALSE
star_transformation_enabled= true
query_rewrite_enabled = false
indexjoin_enabled = FALSE
optimpeek_user_binds = FALSE
pga_aggregate_target = 415865241
optimizermjc_enabled = FALSE
MMAN started with pid=4, OS id=2608
DBW0 started with pid=5, OS id=1656
LGWR started with pid=6, OS id=1728
CKPT started with pid=7, OS id=1536
SMON started with pid=8, OS id=2772
RECO started with pid=9, OS id=2196
CJQ0 started with pid=10, OS id=2184
MMON started with pid=11, OS id=2688
MMNL started with pid=12, OS id=2188
PMON started with pid=2, OS id=1400
Wed May 07 14:36:58 2008
CREATE DATABASE PI1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE 'D:\oracle\PI1\sapdata1\system_1\system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE 'D:\oracle\PI1\sapdata1\temp_1\temp.data1' SIZE 300M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE 'D:\oracle\PI1\sapdata1\undo_1\undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE 'D:\oracle\PI1\sapdata1\sysaux_1\sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('F:\oracle\PI1/origlogA/log_g11m1.dbf',
'C:\oracle\PI1/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('F:\oracle\PI1/origlogB/log_g12m1.dbf',
'C:\oracle\PI1/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('F:\oracle\PI1/origlogA/log_g13m1.dbf',
'C:\oracle\PI1/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('F:\oracle\PI1/origlogB/log_g14m1.dbf',
'C:\oracle\PI1/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
PSP0 started with pid=3, OS id=2992
Wed May 07 14:36:59 2008
Database mounted in Exclusive Mode
Wed May 07 14:37:05 2008
Successful mount of redo thread 1, with mount id 1611568586
Assigning activation ID 1611568586 (0x600e95ca)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: F:\ORACLE\PI1\ORIGLOGA\LOG_G11M1.DBF
Current log# 1 seq# 1 mem# 1: C:\ORACLE\PI1\MIRRLOGA\LOG_G11M2.DBF
Successful open of redo thread 1
Wed May 07 14:37:05 2008
MTTR advisory is disabled bcan you also post 28,000 more lines? I'm sure this will be helpful....
-
Time Machine spends hours partially backing up and then fails with "Time Machine couldn't complete the backup due to a network problem." I've tried various suggestions I've seen on the forum but nothing has worked. TIme Machine worked fine for the last two years and just suddenly started having this problem every time. The only thing that was a little different is that the computer was off for a week while on vacation and then I added a large amount (20 GB) of photos. Now the requested backup size is 82GB, which is large, and process proceeds very slowly for 2-3 hours before failing with the message mentioned. I have more than enough available backup storage space for it. Before failing, Time Machine has backed up no more than 12GB or so of the backup. It fails during different files each time.
I've turned off the computer sleep feature, and I've checked that the NAS is set to never automatically power down. I normally backup over Wi-Fi, but I've also tried connecting to Ethernet and it still has the same problem. It's odd because I also have a MacBook Pro that is still backing up fine to the same NAS using the MacBook's Time Machine.
I am using an iMac with OS X 10.6.8 and an Iomega StorCenter ix2-200 NAS.
I have system logs that I can share if helpful. The logged messages vary a bit from run to run, but here are some messages that I've been seeing:
I always get this message near the beginning of the backup:
Event store UUIDs don't match for volume: Macintosh HD
I've gotten this messsage a number of times:
Bulk setting Spotlight attributes failed.
One Day
Stopping backupd to allow ejection of backup destination disk!
Another day
1/7/12 10:44:20 AM
mDNSResponder[18]
PenaltyTimeForServer: PenaltyTime negative -112916, (server penaltyTime -1132397006, timenow -1132284090) resetting the penalty
1/7/12 10:46:37 AM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x1106be94
1/7/12 10:46:37 AM
kernel
AFP_VFS afpfs_DoReconnect started /Volumes/TimeMachine prevTrigger 0 currTrigger 1
Another Day
1/6/12 8:03:22 AM
Google Chrome[164]
Cannot find function pointer CMPluginInFactory for factory 3487BB5A-3E66-11D5-A64E-003065B300BC in CFBundle/CFPlugIn 0x16f99e20 </Users/smarmer/Library/Contextual Menu Items/Google Notifier Quick Add CM Plugin.plugin> (not loaded)
1/6/12 8:04:02 AM
com.apple.backupd[193]
Copied 7.5 GB of 67.0 GB, 8866 of 8866 items
1/6/12 8:06:58 AM
/System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[1013]
No valid tickets, timing out
1/6/12 8:29:44 AM
mDNSResponder[19]
PenaltyTimeForServer: PenaltyTime negative -148702, (server penaltyTime 2056822773, timenow 2056971475) resetting the penalty
1/6/12 8:59:22 AM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xa5ac380
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect started /Volumes/TimeMachine prevTrigger 0 currTrigger 1
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
ASP_TCP asp_SetTCPQoS: sock_settclassopt got error 57
Another day
1/5/12 3:48:55 PM
mdworker[2128]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
1/5/12 4:24:54 PM
mDNSResponder[19]
PenaltyTimeForServer: PenaltyTime negative -42698, (server penaltyTime 1148718961, timenow 1148761659) resetting the penalty
1/5/12 4:29:58 PM
com.apple.backupd[2074]
Copied 586.4 MB of 67.0 GB, 9891 of 9891 items
1/5/12 4:39:00 PM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xa1c0380bokon0n wrote:
1/11/12 8:53:30 AM
com.apple.backupd[1169]
Warning: Destination /Volumes/TimeMachine does not support TM Lock Stealing
1/11/12 8:53:30 AM
com.apple.backupd[1169]
Warning: Destination /Volumes/TimeMachine does not support Server Reply Cache
Those indicate that your NAS is not fully compatible with Snow Leopard.
1/11/12 8:53:35 AM
kernel
jnl: disk2s2: replay_journal: from: 67182592 to: 78680064 (joffset 0xa7b8000)
1/11/12 8:53:39 AM
kernel
jnl: disk2s2: examining extra transactions starting @ 78680064 / 0x4b09000
1/11/12 8:53:39 AM
kernel
jnl: disk2s2: Extra txn replay stopped @ 79056896 / 0x4b65000
1/11/12 8:53:49 AM
kernel
jnl: disk2s2: journal replay done.
1/11/12 8:53:49 AM
fseventsd[41]
event logs in /Volumes/Time Machine/.fseventsd out of sync with volume. destroying old logs. (253512 14 253512)
1/11/12 8:53:50 AM
kernel
hfs: Removed 1 orphaned / unlinked files and 0 directories
That looks like a problem was found with the file system (data) on the TM disk. I don't know the details, but OSX tried to recover it from the journal, and found extra data on the drive. Likely a result of the incompatibility mentioned above.
1/11/12 9:47:40 AM
com.apple.backupd[1169]
Bulk setting Spotlight attributes failed.
That's a problem writing to the NAS drive.
But the backup continued after all this.
1/11/12 1:25:07 PM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x9d00b44
Something caused a disconnect. Can't tell from the log what it was.
I doubt it's a problem with something in OSX being damaged or corrupted, but reinstalling OSX isn't a major hassle, so might be worth a try.
To be incompatible with Snow Leopard, this NAS must be at least a couple of years old. It may be beginning to fail.
Contact the maker. See if there's an update to make it compatible with Snow Leopard. If so, that might fix it.
If not, or if that doesn't fix it, see if they have any diagnostics that will shed any light.
Maybe you are looking for
-
Unable to refresh SQL Server data source through Data Management Gateway
I just installed the version 1.1.5226.8 of Data Management Gateway and tried to refresh a simple query on a table connected to SQL Server, with no transformations in Power Query. This is the error I obtain: Errors in the high-level relational engine.
-
Auto Assign Tasks while on Vocation in BPM 11.1.1.5
Hi, Any idea how to assign tasks automatically in BPM 11.1.1.5. Lets say there are tasks assigned to me and I am in the middle of working on those and I go on vocation how can do I get all those tasks to be automatically reassigned to some other user
-
Itunes show we are experiencing a problem activating your iphone
itunes show we are experiencing a problem activating your iphone after update to 4.2.1 from 4.0 iphone 3gs
-
I'm very sorry if this has been asked a million times before but so far I haven't found anyone with quite the same requirements as me. So currently I am looking at getting a macbook mainly for graphics (Photoshop/Illustrator) but I will be doing a lo
-
Production against sales order
Hi all experts, I am creating a report for Linewise width wise handover summary(OK production against sales order) I am taking Date from MKPF and QTY from MSEG I need to show Work Center [ CRHD-ARBPL ] but dont know how to link tables can any one sen