Networking Roku Box to internal Airport Extreme Card

Anyone? The Roku box recognized my iMac's wireless network, but it won't connect to my shared internet signal being broadcast by the iMac. Roku's forums are real hard to search in regards apple issues, as they just lump all networking together.
THanks

I had tried that to no avail. The issue as I now understand it is the assignation of individual IP addresses, which an Airport Extreme card either does not do, or I could not figure out how to make it do.
I just bought router, connected Roku to it by wire and made a wireless network for my computer: $40.
Thanks LB

Similar Messages

Where are the settings for the internal Airport Extreme Card?

Here is my problem.
I have a Xbox Slim. It was connected wirelessly to my old Mac computer which had a external Airport Extreme b/g. Connection worked perfectly and had no issues.
I bought a new computer a iMac with OS X 10.6.7. It comes with a built in Airport Extreme Card that has wireless connection for b/g/n.
I set up my wireless connection on my new computer. We have two iphones and they both connect to the new wireless network with no problems.
When I go to connect my xbox slim it asks me for WEP, which I enter, but when I go to test connection I get a error message. The connection fails between the xbox and my network. Says unable to connect and then gives me a bunch of troubleshooting messages which none seem to work.
Under the IP Settings is says Automatic and has a IP address listed and a Subnet Listed. The Gateway is all zeros.
When I go into the Airport settings the DHCP is turned on.
Now I know my next option is enter the numbers manually which I have tried several times. I don't really know if I'm getting the right numbers or not because its a new iMac and everywhere I search people are getting the IP addresses, router numbers, etc. from PC's or from external routers. I need to get mine from the internal Airport Extreme Card.
I have also read posts for setting your options for Mac Filtering. But I don't know where to adjust these. I don't see any options for configuration for a internal Airport Card.
Where do I adjust the settings for Mac Filtering, Signal Strength, b/g/n, etc?
I know my Xbox's connection is fine because I plug in my old Airport Extreme and it connects just fine. But I don't want to use my old wireless router. I would like to just use the connection that is built into my iMac because it has the 'n' network. Is that even possible?
Any help would be greatly appreciated. Thanks in advance.

ImperialStout wrote:
I don't see any options for configuration for a internal Airport Card.
there aren't any.
check out [this|http://discussions.info.apple.com/message.jspa?messageID=3797169] discussion. it is rather old but the facts remain unchanged.
you might want to have another look @ your airport extreme or get a newer, [refurbished_|http://store.apple.com/us/browse/home/specialdeals/mac/macaccessories?mco=MjEwNzM3NjE] extreme (there currently aren't any) or time capsule. these base station are *simultaneous dual-band* capable, meaning they broadcast on both the 2.4 and 5 GHz bands @ the same time.

IMac G5 Airport Extreme Card WEP/WPA Security connection Problem

I have an iMac G5 (non Intel) and a wireless Belkin 801.g MIMO router. When I have no security setup on the router (ie straight out of the box)then the Airport Express card connects to the network without problems. As soon as I set either WEP or WPA or WPA2 security on the router and input the correct settings in the Airport configuration in system preferences the card sees the Network but will not connect. I simply get the message "error connecting to network". I have a Windows based laptop with built in wireless card and this has no problems at all connecting to the secured network, whether it is WEP or WPA or WPA2. Does anyone have any thoughts or ideas please?

I have the same problem with my new black MacBook and a Netgear router. I can connect to the 'free' networks all around me, my Airport Extreme card sees the wi-fi network in my home that I want to connect to, and my old iBook with its lowly Airport card connected (and still does) with no problem using the '40-bit hex' option when entering the password. But now all of a sudden there are just 'errors' when I try to connect (having tried all the various options, and two different types of passwords or keys as provided by the network administrator). Oh yeah, and of course Apple Support won't help because they don't want to know about problems relating to third-party technology... We can't be the only ones with this problem!
MacBook Mac OS X (10.4.9)
MacBook Mac OS X (10.4.9)

Factory default Internal Airport Extreme

Is there a factory reset for an internal airport extreme card on a mac mini? I am not able to set up a wireless linksys router. It was working last week by the way, then I bought and installed the software drivers for a linksys wireless n but it didn't work as the airport is for g only. So i am trying to go back to my wrt54g I was using last week but the airport card keeps saying it failed?

Also, what would be the absolute minimum settings for the wireless part of the linksys router, ie security settings, network mode, security mode, channel, etc. Here are the settings I have right now
1. Basic wireless settings, Network Mode (mixed), Network name (linksys), Channel(6), SSID (enabled)
2. Wireless Security settings, Security mode (WPA Personal), Algorithms (TKIP), Shared Key (six letters and 2 numbers), Key Renewal (3600 seconds),
3. Wireless MAC Filter (disabled)
4. Advanced wireless settings, I haven't touched any of them. Authentication type is (Auto). Secure easy setup (enabled)

Airport Extreme Cards for Powerbook Ti

So, why noy make an internal airport extreme card for the Ti Powerbooks? It's not like theyre that old of a model. and if other companys can make em for external use why cant Apple do this?
Hopefully someone at Apple reads this. Ive been an avid supporter of Apple comps and its not like customers such as myself wouldnt actually buy these if they were to release them. Think about it....every titanium power book user would prolly run out and re-buy the already installed cards all over again. Makes sense to me.
WM

It may make sense to you, Wil, but not many people nowadays are investing in hardware enhancements for their three-and-four-year-old Tibooks. And with other manufacturers producing cards that can be installed in a Tibook and moved on to the next laptop without ever opening up the Tibook, and offering (in many cases) far better wireless range than the built-in Airport antenna can offer, Apple would face tough competition for the few customers who might be interested in such a product.

Airport Extreme Card for Mac Pro (bought in 2006)

In or around 2006 I bought a Mac Pro (it was right when the starting coming with Intel Chips) and didn't upgrade to have it come with a Airport Extreme Card inside. A week later I ordered one, but it wasn't the right one. I have been looking online and found one, the MA688Z/B on amazon.com. I have looked at websites showing how to install this, however, I don't see the place on the motherboard where it goes. Is this the right internal Airport Extreme card for my Mac Pro from 2006 or is there a different one? Also, is the Airport Express that is external better and should I just go that route?
Please help! Thanks!

Here's a picture of the 802.11n module installed in a Mac Pro.
It's small and fits near drive bay 2. It's not designed to be fitted by customers, so you cannot buy the card on the Apple Website. Fitting involves plugging in the card. A small brass screw - and two antenna cables, which clip onto the corners.
Unless you have tiny fingers, I'd pay to have it fitted in an Apple Store.
Warning. The Mac Pro is heavy. Do not attempt to carry it to the mall if you have a heart condition or are pregnant.

Airport Extreme card does not see any networks...help!

I have a home network that is working fine - 2 linksys routers with WDS set up... it all works great - an Ibook g4 running 10.3 and has an Airport Extreme card connects flawlessly everyday. As does an old G4 powerbook with an old airport card.
however, I have this dual g4 with 10.4.3 running, and a recently-installed airport extreme card.
When I turn airport "on" it never sees our network. And it doesn't see my neighbors' networks, either, which are also always visible.
I can, howevr, connect via ethernet to the router that is somewhat nearby. that networking is fine...I can get on wired, but not wirelessly.
I've installed the 2005-1 update, and have run Software Update as well to see if there are any other patches/updates necesary. so as far as I can tell, I am up to date.
system profiler says:
Wireless Card Type: AirPort Extreme
Wireless Card Locale: USA
Wireless Card Firmware Version: 404.2 (3.90.34.0.p16)
Current Wireless Network: wireless network not available
and in the extensions section for the airport, it says:
Version: 4.0.4
Last Modified: 11/20/05 9:55 AM
Get Info String: 4.0.4, Copyright © 2002 - 2005 Apple Computer, Inc., All Rights Reserved
Location: /System/Library/Extensions/AppleAirPort2.kext
kext Version: 404.2
Load Address: 0x39738000
Valid: Yes
Authentic: Yes
Dependencies: Satisfied
Integrity: Correct
I am at a loss. Is there anything else I can do before writing off the card as a bad card - or perhaps the logic board is faulty?
I hope there is a simple solution to this. I appreciate your expert help.

Go back and recheck the Airport Extreme card installation. Make sure you plugged the connector for the internal Airport antenna into its socket on the Airport Extreme card itself - and make sure the plug is fully seated into its socket (none of the metal sleave should be showing).

How to setup a network setup with an airport extreme card in a mac pro

I have installled an airport extreme card in my mac pro. Restarted the mac. The AP black triangle appears on right top of the screen. If I activate the AP than the a light grey triangle appears, with grey bars. I can create a network, than the triangle becomes dark grey with an kind of black computer icon in the grey area. The signal strength shows all blue bars.
I have two other wireless networks (linksys and another for streaming music) both are working and detected by my imac. But the mac pro does not detect these networks.
I would have thought that the two networks would be detected automatically.
Please some advice to solve this problem
Imac G5; Mac pro Mac OS X (10.4.4)

You won't believe this, but the card is a crock. Mine was installed by an Apple tech at an Apple store. He obviously did not check out reception.
At home, I tried setting this up right next to a Netgear wireless router (2 feet away!), and got no signal bars. Yet I pull the cover off the machine and I get 4 bars and can connect to an 802.11g network. This stinks. What idiot at Apple designed a card where the antenna is a 1" square piece of metal? Could this be an emi cage? Where did they hide the so-called "built-in" antenna. Who knows?
See if you can aim the back of the machine toward the wireless router. There is a back door into this mother, through the fan(ny) opening.

I have a Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it. The card is recognized but will not see the in-house network. This is a pre-intel computer. Do I need an antennae?

I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it. The card is recognized but will not see the in-house network. This is a pre-intel computer. Do I need an additional antennae? If so, which one because my research is confusing me about what is supposed to work with this computer.

Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.

Airport Extreme Card (will not automatically connect to home network)

Running OSX (10.4.7) on a G5 2.0 DualCore. I just had an Airport Extreme Card installed by Apple a week ago. Everything was working fine with WiFi ( I use a Lynksys Router. But oddly now when I cold boot up, the Airport Extreme will not automatically connect to my home network. The little Airport icon on the upper right is always greyed out ( even though clicking on the icon... says that Airport is "On" ). So I now have to manually select my home network everytime I boot up. The first week or so though, I didn't have to do this...it just automtically connected to my home network. I made no changes to the router settings, nor the Network prefs.

I have been able to get my home network running with simultaneous access to the internet with the MacMini and the PB G4 via a WL router (Netgear WGR614v4 with four ethernet ports).
This was the process:
1a) Turned off airport on both computers.
1b) Turned off both compters and
1c) disconnected the router from the cable modem.
a) Disconnected ethernet cable from WL router to Macmini.
2b) Powered down the router for 10 seconds.
3a) Keeping both computers unpowered,repowered router and pressed the reset button (behind an unmarked tiny hole in the back of the router) then re-connected it to cable modem. Waited 30 - 40 seconds until internet service lights flickered green.
3b) Reconnected ethernet cable to MacMini and turned on power for MacMini. No Airport running. With administrator privilege I configured in Syst. Prefs. "Sharing" folder Internet access using "Built in Ethernet" port for computers running "Airport".
4) Turned Airport network on in MacMini and started browser.
Result: Internet connection established.
5a) Powered up PB G4 and then turned Airport on.
5b) In Syst. Prefs. in "Sharing" folder turned Internet Sharing off. But set "Share your connection from Airport" to computers using: Airport with check-mark. (No Built-in Ethernet and no Built-in FireWire!)
5c)Started browser. Result: Internet connection established.
6a) In the Finder window of both computers I clicked on "Go" in toolbar and looked for the name of the other computer, which were listed as alias besides the "Library" and "Servers" aliases. Clicking on the computer alias brought up the 'Networked Globe' and a control button "Connect".
6b) Clicking on "Connect" brought up the mounted drive of the other computer.
Result: Wireless network operational.
PS: I don't dare yet using encryption for the airport network. That's for another day.
Power Book G4, MacMini Mac OS X (10.4.7)

Airport Extreme Card can't connect to wireless network

Hello All,
I recently installed an Airport Extreme Card into my PowerMac G5, but am having difficulty connecting to the existing wireless network. The card appears to be installed correctly, and Airport comes up and says it's running, but doesn't see any available wireless networks. An iMac 5 feet away (and no closer to the airport extreme base station) connects perfectly. With all the info about the antenna, i've triple checked to make sure the antenna is completely installed in the card so I don't think that is the issue. It's part no. M8881LL/A Model No. A1028 and it's installed in a PowerMac Dual 2Ghz PowerPC G5. I'm wondering if there is a compatibility issue? Any comments?
Thanks for the help.
PowerMac G5 Mac OS X (10.4.8)

Hi Duane,
Thanks for the welcome and the reply. The PowerMac is an older one so I don't have the external antenna, and have looked around for one with no luck. I just ordered one and it will be here tomorrow so I'm hoping you saved the day and that's the ticket. Thanks so much for the help! I'll update this again if that solves my problem, but just wanted to say thanks... i'll know more on Monday.
Slater

AirPort Extreme Card recognizes networks but won't connect - HELP!

hello forumites,
firstly, if this post is similar to one that has already been well-read and widely responded to, i apologize and ask that you respond with the link to said thread.
my issue pertains to an iBook G4 (circa 2004 i believe) running OS X 10.4.11 with an apple-installed AirPort Extreme card (firmware version 405.1). i have never had any problems with the card previously, but in the last week it has quite suddenly ceased to connect to any wireless network i attempt to log on to (both password protected and non). despite the card's sudden inability to connect, it still is able to recognize all the wireless networks in my location (i know this as the networks are still listed in the AirPort status pull-down menu).
in an effort to fix the issue i have:
restarted the card (turned it off and on)
restarted the computer (many, many times)
used the network diagnostics program
used the network setup assistant program
attempted to connect through the system preferences (network)
attempted to connect through internet connect
did a complete erase and install
still nothing.
anyone had a similar problem? anyone find a way to fix it?
thanking you in advance for your brilliance and time,
brad

firstly, tesserax, a tremendous thank you for your help. unfortunately, i tried each step you suggested, but the problem continues.
step 1: i have tried and failed to connect to several different networks in a handful of locations (home, work, friend's house, local coffee shop, etc.).
step 2: i have disabled my own wireless encryption as well as the wireless encryption at a friends house, however, to do so i had to use their ibook, as my own either didn't list the base station in the AirPort utility (although it did list the base station in the AirPort status pull down), or it asked for a password even though the base station wasn't password protected (maybe this may add some insight into the issue?).
step 3: i have connected the computer directly to the modem using an ethernet cable and was able to go online - perhaps this means the problem is related solely to the card.
step 4: i moved the the com.apple.networkConfig.plist file and and the SystemConfiguration folder to the desktop and restarted. unfortunately, OS did NOT rebuild the files. instead, i had to go through the network diagnostics to rebuild them manually. while the files were replaced, the problem was not solved.
step 5: i reset the PRAM, but the problem still exists.
step 6: i reset the PMU, but the problem still exists.
i then tried various combinations of your suggestions, including moving the files out of the preferences folder and then reseting the PRAM and the PMU, but still nothing.
after having attempted every fix i could think of (and that was before posting to this forum) i did a full erase and install of the OS. since that's usually the cure all to whatever ails the computer, it's my assumption that the issue is a physical (hardware) one. that said, if you have any other suggestions i will be more than happy to give them a shot.
thanks again,
brad

20-in Intel iMac (early 2006) Tiger -- configuring Airport Extreme Card

Hi -- I come from a mostly "not mac" background and am having difficulty diagnosing a slow internet connection -- and can't tell if I'm trying to use the right tool for the job. (I am using MAC OS X 10.4.11)
My home network uses a Linksys WRT54G wireless router and I've got 3 computers that connect using the router (including the iMac) -- the other two are Windows-based machines. We've got a 2-story house and I've been moving the router and computers around the house a bit trying to come up with the best configuration for a good wireless connection (I'm going to be ordering a supplemental antenna, but don't have it yet).
The two Windows machines (one using a relatively old PCI wireless card) get strong signals. I'm not even sure how strong a signal the iMac gets as I am not sure which utility allows me to see this. I do know that it has a painfully slow connection speed (at least web pages load at a crawl...).
I've got an Airport Extreme Card (0x14E4, 0x89). Firmware: Broadcom BCM43xx 1.0 (4.170.46.9).
I went to Apple's support downloads, and attempted to install firmware updates, but I am getting a message that indicates that these updates are not applicable to my card. I updated the Airport Utility software, but as far as I can tell that utility is looking for an Airport Extreme base that I don't have. Other than that I haven't seen any applicable information using that utility.
I was hoping to reach a configuration area that would allow me to specify 802.11b or g, and allow me to specify the channel -- but other than in the internet sharing section I don't see a place that allows me to do this. (I've currently got our home network on a 802.11g network on channel 8.) We're using WPA personal encryption -- which does appear to be recognized by the Airport Extreme card.
Am I missing something? I've got 3 "Airport" utilities but none of them seem to allow me to specifically configure the internal card. I've gone to "network" under System Preferences, and although I can see a "configure" button when I click on "Airport," it's pretty basic and doesn't allow me to set the channel or anything other than encryption & a password.
I would appreciate any help you can give me. Is this card so outdated that I should invest in a newer one? Am I limited by my outdated OS? (I hesistate to upgrade OS's when things are working -- in the Windows environment at least newer isn't always better...) Thanks. mcaren

Thank you Duane for your response.
I have only noticed a huge difference in the connection speeds of my iMac and our other computers in the last 6 mos. to a year. I did notice an improvement in speed when using a Rosewill USB wireless adapter -- I had a good wireless signal but would intermittently lose connectivity (and their user support was basically nil...).
I can't tell if I'm actually seeing an improvement in our other machines' connection (perhaps from the tweaking I'm able to do) or if in fact the iMac is slowing significantly. I think it's the latter. I've actually swapped out machines in the same position to see if location is at fault -- and I get no improvement in connection speed. I've had the iMac connected with ethernet to our router when possible because it has had such a slow wireless connection, but I needed to move the router recently and would like the iMac to stay in another room.
I've also read a lot about connection speed issues with Airport, but these reports are usually blamed on Leopard updates (there might be similar Tiger issues, but I don't read about them...).
Oh well. I'm hoping someone out there has some tricks up their sleeve as to how I can improve my wireless connection speed. Thanks for the help! mcaren

Airport Extreme Card missing after Leopard and Login & Keychain Update

After these updates the network prefs showed no Airport card installed, even though it had been there seconds earlier. This was buried at the bottom of a posting for a similar problem. Just wanted to make it easier for others to find.
"I'm having the same issue with an iBook G4 1.2Mz model. Having successfully installed Leopard (5 user license version) on my Macbook, I installed it on the G4. At first this worked until software update installed Login & keychain update 1.0 and Remote desktop client 3.2.1. When the iBook reset the airport extreme card wasn't there. The icon in the menu bar states No Airport card installed."
"Some users have determined that an artifact left over from Mac OS X 10.4.x interferes with wireless connections after Mac OS X 10.5 is installed. The issue can be dealt with by finding and removing the AppleAirPort2.kext file from your Extensions folder, located here:
Macintosh HD:System:Library:Extensions"
That fixed it for me.

Ezz wrote:
Ok, I just installed the Login & Keychain update 1.0 from the software update and after rebooting my Airpot card does not get recognized anymore. This really ***** Apple!
Anyone else encountered this problem? Any known solution yet?!
Message was edited by: Ezz
Judging by the amount of posts it must be isolated. Mine works fine. Did you repair permissions ?
" Keychain-Administration or Privilege Issues after Upgrading to Leopard:
If after installing Leopard as an upgrade or archive and install you experience any issues with not getting mail, can't run Disk Utility, can't login as administrator, can't print or anything that entering existing User name and/or passwords requires, you are not alone and Apple is working on it now.
The fastest method of determining if you have been bitten by this, open System Preferences, click on Accounts and verify that you are the Administrator as opposed to Standard, and that the checkbox asking if you want this user to be an Administrator is checked. If you are Standard, and the box is unchecked and/or greyed out, you have a situation most likely, whether you know it or not, yet.
Further verification can be done in the Accounts window by clicking the lock to make changes, entering your name and password and being denied access.
Apple says the best thing to do right now is not to try too much voodoo and wait until later today for a solution, hopefully. I was told to close the lid and walk away until Apple calls me back.
The good news as I write this on my old reliable Pismo, is that I have a bootable Carbon Copy Cloned 10.4.10 complete back up on an OWC external FW disc. Thanks Mr. Bombich! I just hope I don't have to use it.
Post from xlr8yourmac.com
William

Airport Extreme card problems

I just installed an Airport Extreme card in my daughter's out-of-warranty 1.07 GHz G4 (12 inch) i-Book, running OS 10.3.9, which never had a wi-fi card in it before. System profiler recognizes the new card OK, and I also ran the latest software update which changed the firmware to 400.17 (3.90.34.0.p11).
At first I couldn't get it to find the signal from my Linksys router, on which three or other Macs are currently running, two of them with wireless connections, the others with ethernet. No problems ever with any of them or with the ISP (Comcast broadband through a cable modem).
However, when I brought the i-book to within a foot or less of the router, the AirPort signal would come up OK and the internet would work normally. But with anymore distance than that, no success, and the signal would fade out. I tried re-installing the card several times, being particularly careful that the antenna cable was properly plugged into the card. No change.
Then I removed the new Airport Extreme card from the i-Mac and installed it instead into my main computer, a dual processor G5 also running 10.3.9 (having of course unplugged the Ethernet cable). This time the Airport card worked perfectly at the ordinary distance from the router. (I had actually managed to find the original little T-shaped external antenna from the box of never-before-installed G5 parts, and plugged it into the correct hole.)
Then to doublecheck, I ran the "hardware test" CD-ROM twice on the big G5 machine (once slow, once fast) and both times it showed the Airport Extreme card as "passed".
So I pulled the card out again and reinstalled it into the i-Book. Same same as before... works OK only a few inches from the Linksys router's antenna, but not further away than that.
Obviously it would appear that there is an internal antenna problem on the i-Book. So looking for a shorted cable, using a digital VOM I measured the resistance between the little aluminum outer block on the i-Book antenna wire connector and the interior of the pin extending from it and it showed only 0.8 ohms or so, which I would have thought indicated a short circuit. But then I took the same measurements on the big G5's internal antenna connector and it showed the same!
Hmmm.
The supplier of the Airport Extreme card gave me an RMA at my request but I told their tech dep't on the phone that I was quite sure the card itself was fine. Any ideas on any this? I'm stymied.
Thanks out there for any feedback.
AP

Hi jeyl,
Welcome to the Discussions.
There's no need to return the card nor is there a problem with the iBook. It's most likely the antenna isn't fully inserted into the card. It takes much more force than you'd think necessary to insert it. This article illustrates a properly attached antenna.
John

Networking Roku Box to internal Airport Extreme Card

Similar Messages

Maybe you are looking for