Networking staff is asking for infomation for FP install

Can someone provide me with the destination IP addresses and TCP/UDP ports that my networking team needs to open on the firewall to get installation to complete 11.8.800.94?
Thank You,
Description: cid:[email protected]
Bill Sprinkle
End User Analyst II
Systems and Technology Service Center
SCL Health System / Exempla Healthcare
[email protected]<mailto:[email protected]>
303.272.0928(4-0928)Office
303.357.6117 Cell

Hello chilondon,
Thanks for using Apple Support Communities.
The password your Mac is prompting you for is your administrator password for the computer.  If none of the attempts to enter it in worked, including leaving it blank, you can reset the password by following the directions in the link below.
Reset the user password in OS X Lion, Mountain ... | Apple Support Communities
Take care,
Alex H.

Similar Messages

  • Resetting my network settings is asking me for a four digit password... i dont know it.

    resetting my network settings is asking me for a four digit password... i dont know it

    Connect the iPod to its syncing computr and restore the iPod via iTunes.  If iTunes asks for the passcode and you can't enter the passcode, place the iPod in recovery mode and then restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • I just tried to use my iphone as modem for my laptop but once i select the iphone at my network connections it ask me for my password, does anybody knows if that information is either my iphone serial number, fcc id, IC, etc

    i just tried to use my iphone as modem for my laptop but once i select the iphone at my network connections it ask me for my password, does anybody knows if that information is either my iphone serial number, fcc id, IC, etc

    If you are trying to connect via wifi to our iPhone then the password should be displayed on your phone when you go into Personal Hotspot, by default it is a random password set by the phone but you can change it there.

  • HT1595 My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password

    My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password

    I just went through this last night. (Aug 15, 2013)
    What I did to get back up and running. This is not the first time I have lost the network connection with my Apple TV 3
    Products effected: Apple TV 3 and Home Sharing (My Apple TV 1 was not effected)
    Power down (unplug) the Apple TV and power down your router ( in my case, it is a FIOS router, flipping the on/off works fine).
    Power both items back up.
    At this point, I usually can reenter my Apple ID and PW. and reconnect Home Sharing.  But for some reason I was unable to reconnect last night but was able to get it reconnected in the morning. I was jut to tired to deal with it last night.
    A new issue that is was able to fix after a good nights sleep.
    I did figure out, (after trying to reenter my ID and PW many times and having it tell me that my ID and PW was wrong), that when using the Apple TV on screen keypad to type in the user ID. DO NOT use the ".com" keypad button. Instead type out each character for .com. ( or what ever ending you use for your ID account.)
    Once I typed out my full ID and PW. everything is back to 100%

  • Can't uninstall a network installation (Version: WebLogic 8.1 for Windows)

    Hi,
    As described in the above subject, I encountered an error when trying to uninstall
    WebLogic 8.1 for windows, which is installed from another computer (WINXP) thru
    network.
    The installation executes on the remote machine. When asking the location for
    BEA home, I specify a path on a network drive , something like z:\bea.
    (z: is the drive of the computer I want weblogic to be installed. I do this because
    it only has enough space for the final installation, but not together with the
    temporary files)
    It seems that everything goes well, although the links in "Program Files" are
    created on the remote machine only. However, when I want to uninstall it, I encounter
    problems.
    First, when using the "add/remove programs" way, it complained that it was not
    able to find the path to javaw.exe. I paste the full command Z:\bea\jdk141_03\bin\javaw.exe
    -Duninstall.dir="z:\bea\weblogic81\uninstall" -jar "z:\bea\weblogic81\common\lib\uninstall.jar"
    and then it went on. Splash screen and the first wizard screen appears afterwards.
    However, when I pressed "Next", a prompt appeared, with message ":[z:\bea]".
    The same message appeared in console mode uninstallation.
    Is there anyway to solve this problem? Thx!

    Hi,
    I tried to replace all "Z:" to "C:" in registry.xml and re-uninstall again, but
    that doesn't work.
    Actually the thing I want to happen is only to remove the current (and somehow
    faulty?) installation. Is it 100% ok to just remove all the files manually?
    David Chan
    "Wayne W. Scott" <[email protected]> wrote:
    >
    David:
    It sounds like the install was done on one machine and you are trying
    to uninstall from
    another. If that is true ...
    Check the contents of the registry.xml file and see if the environment
    variables match
    those of the machine you are working on. In particular, the items that
    specify host
    names and install directories.
    Wayne Scott
    David Chan wrote:
    Hi,
    As described in the above subject, I encountered an error when tryingto uninstall
    WebLogic 8.1 for windows, which is installed from another computer(WINXP) thru
    network.
    The installation executes on the remote machine. When asking the locationfor
    BEA home, I specify a path on a network drive , something like z:\bea.
    (z: is the drive of the computer I want weblogic to be installed. Ido this because
    it only has enough space for the final installation, but not togetherwith the
    temporary files)
    It seems that everything goes well, although the links in "ProgramFiles" are
    created on the remote machine only. However, when I want to uninstallit, I encounter
    problems.
    First, when using the "add/remove programs" way, it complained thatit was not
    able to find the path to javaw.exe. I paste the full command Z:\bea\jdk141_03\bin\javaw.exe
    -Duninstall.dir="z:\bea\weblogic81\uninstall" -jar "z:\bea\weblogic81\common\lib\uninstall.jar"
    and then it went on. Splash screen and the first wizard screen appearsafterwards.
    However, when I pressed "Next", a prompt appeared, with message ":[z:\bea]".
    The same message appeared in console mode uninstallation.
    Is there anyway to solve this problem? Thx!

  • I keep getting network connections error when downloading update for iPhone 4. Any suggestions?

    I keep getting network connections error when downloading update for iPhone 4. Any suggestions?

    I think I solved the problem by initiating the update in a different way, from the itunes panel where I can click to start the update, instead of saying yes when asked if I want to update when itunes launches in response to the iphone being plugged into the computer.

  • Can I turn off ask to purchase for children under 18

    My family wants to try family share but I don't need them to ask my permission to make purchases.  They are 11 and 13.  Is it possible to turn off Ask to Purchase for them?

    The Timed Access feature in AirPort Utility for the AirPort Extreme will allow you to set up individual rules for each wireless device that you want to control.
    For example, a simple way to do this would be to allow allow Internet access for the devices that you specify........
    Weekdays.......Between.....7 AM and 9 PM
    Saturday.........Between......7 AM and 11 PM, (or up to 11:59 PM)
    Sunday...........Between......7 AM and 9 PM
    The devices that you specify will only be able to connect to the network during the times that you set.  That won't keep them from using 3G though, if they have it on their iPhones or iPads.

  • How do i find which Apple ID is associated with music in my iTunes? When I sync with my iPad and iPhone it tells me I have music, apps etc from more than five IDs. I am asked for PW for a number of now extinct accounts.

    how do i find which Apple ID is associated with music in my iTunes? When I sync with my iPad and iPhone it tells me I have music, apps etc from more than five IDs. I am asked for PW for a number of now extinct accounts.

    Go to Settings/icloud. The Apple ID at the top of the screen is the only one you need to be concerned about. That one MUST be a working ID, and you must know the password for it, or you will be unable to use the phone if it ever crashes, you want to update it, or you want to sell it.

  • When I upgraded to ios 5, it asked me a for a new game center name.  How do I use my old game center name, since it makes me start some games over without it?

    When I upgraded to ios 5, it asked me a for a new game center name.  How do I use my old game center name, since it makes me start some games over without it?

    Carefully follow steps 1-9 outlined by wjosten in this post: https://discussions.apple.com/message/13356770#13356770.  This will not, however, avoid wiping any non-purchased media from your phone (ripped CDs, etc.) as this is only synced one way: from your computer to your phone.  You will have to either rebuild your iTunes library with this content and sync again to restore it to your phone, or purchase 3rd party software to copy it from your phone to iTunes prior to syncing (such as Touch Copy).

  • Help needed with Network UI (JNET) in WEB DYNPRO for JAVA

    Hi all,
      We are using Network UI element in our Web Dynpro Java. All is ok, but we have a problem with 'PRINT_PREVIEW' button. If you do click on this button, another window is open with a page preview, but always is shown the first XML loaded, in other words, if you load a XML and change it, print preview don´t show this changes.
      There are some information about Network UI in SDN but nothing about our problem.
      Can somebody help me?, we need show refresh data in print preview page.
    Thanks for all in advance.
    Gabriel Garcia.

    Hi Ayyapparaj,
      We are generating all XML (Type Repository, Data, etc...) and passing this new file to Network UI Datasource property.
    Thanks for your response.
    Gabriel Garcia.

  • When I try to open live hot mail I get this message:The Windows Live Network is unavailable from this site for one of the following reasons:

    When I try to open live hot mail I get this message: The Windows Live Network is unavailable from this site for one of the following reasons:
    * This site may be experiencing a problem
    * The site may not be a member of the Windows Live Network
    You can:
    * You can sign in or sign up at other sites on the Windows Live Network, or try again later at this site.
    However, when I open hot mail in IE it opens just fine. Tried changing the password as suggested but it did not help in Firefox.

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

  • How do I change my iPod onto my new apple account from my old account? It always ask's me for my old password, which I can't remember, and no longer have the email address. Thanks

    How do I change my daughter's  iPod onto my new apple account from my old account? It always ask's me for my old password, which I can't remember, and no longer have the email address. Thanks

    Purchases are locked to the account that purchased them. Thus first try to recovery use of the original account.
    Also, yo have obtain use of the original account to deactivae the Activation Lock
    Find My iPhone Activation Lock
    Is there a way to find my Apple ID Name if I can't remember it?
    Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. See Changing your Apple ID password if you'd like more information.
    The method includes if you do not have access to your original email account.
    The
    I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
    Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See Changing the name you use for your Apple ID if you'd like more information.
    CHANGE ID
    Apple ID: What to do after you change your Apple ID
    The ID is used in the following locations and you  have to change them.
    Settings>Messages>Send and Receive
    Settings>FaceTime
    Settings>GameCenter
    Settings>iCloud
    and Settings>iTunes and App store
    You  have to sign out of ID (for iCloud you delete the iCloud account from the iPod) and sign in with other ID.
    Note the following are resolved if you  use Family Sharing (iOS 8 and later):
    - Apps are locked to the account that purchased them.
    - To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

  • Ask to Buy for all family members.

    Hi,
    I'm the Organizer for my Family Sharing.  How can I ensure that all my family members have to "Ask to Buy", regardless if they are a child or not.

    I did a simple purchase on a family member, it did not ask the Organiser for approval.
    How can I tell Apple that the Organiser should have the option to approve purchases?

  • I have a MacBook Pro.  My mac can detect wifi.  But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest.

    I have a MacBook Pro.  My mac can detect wifi.  But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest. (Network settings, ISP, Internet and server.)

    Hello NotAppleSavy,
    Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • How can I keep lion from generating .DS_Store files on windows network partitions, but not disable it for all network partitions?

    How can I keep lion from generating .DS_Store files on windows network partitions, but not disable it for all network partitions?  I am fimilar with changing the setting for all network partitions(defaults write com.apple.desktopservices DSDontWriteNetworkStores true), but that is undesirable when I connect my laptop to my home network. A preferable solution would be where I could control the writing of these files based on disk format (NTFS vs HFS+).

    Go to MacUpdate or CNET Downloads and search for ds_store. There are numerous utilities for preventing them from being transferred to Windows systems.

Maybe you are looking for

  • Print parameters in Excel sheet

    Hi, I have a question regarding print parameters of an excelsheet. we have a report program which downloads the data into Excelsheet. The users run the program online, and once the excel is downloaded, they will take a print out. This excel has diffe

  • Transparency in CMYK color mode

    Windows XP Pro, Photoshop CS3 It seems  that one can only retain background transparency if image file is saved in PNG or GIF file format. It also seems that one cannot save to these file formats if graphic is in CMYK color mode - one must be in RBG

  • How to apply one animation to play 30 different images?

    I'm brand new to Edge Animate and I'm struggling to find the answer to this. I have an image that comes on to the screen from the left, then stops, then user clicks a button and the image exits stage right and next image needs to come on from stage l

  • Unable to see 2nd and 3rd pages on the report

    Hi - I am facing an issue while developing a simple report. This report is based on a table called PROD. DDL statement of PROD is: CREATE TABLE PROD    (PID VARCHAR2(6),     PNAME VARCHAR2(6),     PCOST NUMBER(4,2),     PPROFIT NUMBER(3,0),     CONST

  • Saving DOM to *.xml using JAXP only !

    There are tons of question regarding this topic in the forum already. But i'm willing to run thru the DOM to write back into the file , the problem is how do i acces the first to lines like dtd declaration etc .. any cues?