Networking to a PC cont...
I've connected my Macbook Pro to my Dell M90 PC (see below). How do I now see the drives and exchange files from either computer to the other?
(Previous Post)
Mshort
Posts: 2
From: US
Registered: Feb 26, 2009
Connecting Mac to PC wireless
Posted: Feb 26, 2009 7:01 AM Reply Email
How do I connect my new Macbook Pro to my Dell M90 laptop (Windows XP SP3)via wireless cards in the laptops while keeping my internet connection (ethernet) on the PC? I have no internet connection on the Mac (nor do I need one in this environment). I just want to be able to exchange files between the two without using my thumb drive. Thanks.
Macbook Pro Mac OS X (10.5.6)
Matt Wolanski
Posts: 382
From: Ohio
Registered: Aug 4, 2000
Re: Connecting Mac to PC wireless
Posted: Feb 26, 2009 8:13 AM in response to: Mshort Reply Email
You can create an ad-hoc wireless network on the PC - but then you cannot use the wireless card on the PC for connecting to the internet.
assuming you have a wired ethernet connection for the PC - or that you do not need to keep internet connectivity on the PC during the file transfer - open the properties on the wireless card on the PC and on the wireless networks tab - click the Advanced button - the choose Computer to Computer (ad-hoc) networks only. That is the main part of the setup - if you do turn on internet connection sharing on the wired port you will automatically get DHCP and such on the wireless - not sure if I have tried the ad-hoc without having another live connection.
or you could start the other way and turn on internet sharing on the mac side and make the mac a wireless access point - even though it does not have a wired connection - then add that wireless network to the PC's list of networks.
MacBook Pro 2.33GHz 17" with lots of extras Mac OS X (10.5.6) iPod Video 30GB iPhone 8GB
Mshort
Posts: 2
From: US
Registered: Feb 26, 2009
Re: Connecting Mac to PC wireless
Posted: Feb 26, 2009 1:01 PM in response to: Matt Wolanski Reply Email
OK I got it to work going from the Mac to the PC. I'm connected wirelessly and still have my ethernet connection to the internet active on the PC. Just what I wanted. Now, where can I see the Mac on the PC or vice versa? How do I access the drives on either machine?
Macbook Pro Mac OS X (10.5.6)
Much more likely no one knows the answer.
I have not seen that error.
I did a Google search and came up with no real information.
The only thing I can recommend is if everything works fine on the G4 then maybe you need to re-install OS X on the problem machine.
iFelix
Similar Messages
-
Strange network problem!!! Please Help!!!!
I'm trying to copy some files from my PC to my MBP on my wired home network, the problem is that it is very slow. So then I looked at the activity monitor and saw that the network flow is not contant, it keeps dropping all the time, like I have 100% peaks and then 0%. This is also happening on my wireless network. My using MacOSX 10.4.8 and Windows Vista RC1 on the PC. When I try to ping the PC verything is fine 0% of packet loss. What could be wrong???
Vista RC1 is only one notch up from beta.
I think they're up to RC3...which is a huge difference.
I would personally not put too many important files on a PC running RC1. Also, that vista-version may or may not have something to do with network anomalies. -
I am looking for some advise on how to mirror my Mac Book Pro to my TV. I have purchased an Apple TV
I would disagree to the extent that it is dependent upon the network. If the network is reliable then airplay won't be an issue.
I used to think the same thing, but even with an all wired network I run into contant problems with mirroring and AirPlay. Audio drops out, or randomly starts to become garbled. Video just freezes. I can run loaded ping tests while it is happening and get 1.0 - 3.0 mil second response times the enitre time with no packet loss and AirPlay will still drop out or hang, lag. -
Second network cont. has error. Any ideas?
Upgraded my motherboard and proccesor from K7N 420D to
K8N Neo2 with 3000 winchester last night.
I decided to see if it would boot with installed drivers (unified drivers for all nforces) and it did. Reinstalled Nforce drivers, video drivers, gigabit driver and AMD 64bit driver.
Now in device manager it shows the Realtek Gigabit NIC as fine but
Ethernet Network Controller above it is yellow with a Code 28
I cant remove it and updating drivers doenst work
Windows update sees the need for new driver buy fails on install.
I am working fine eith the Gig NIC so I wont rebuild windows just for one small problem but if you can help I would be grateful.
Biorn
Ireland
K8N Neo2 bios 1.3
3000 Winchester, 2x 512mb crucial 266ddr
Msi Ti4200 with 6600gt on the way.I think I've got exactly the same problem, though I have a completely new computer. When I boot, I get this message:
"For realtek RTL8110S/8169S Gigabit Ethernet Controller Beta v1.00(030811)
PXE-E61: Media test failure, check cable
PXE-M0F:Exiting PXE ROM"
Is there any way I can do anything about this?? -
I have erased all contant and settings and now my ipod wont choose the network
i have erased all content and settings and now when it says select network i do.. type password and it wont let me choose the network help me
Unplug ur router and wait 15 secs.
Plug it back in and wait 10-15 secs.
Try again. -
Can I import contants from social networking website?
This is my first smartphone and I want to know more about it. I heard my friends said I can import contact from any social networking website, but I cannot nor find out how from Internet.
I just ask my friend again and she said I need anroid (I am not sure is that how you spell it). I can't find that in the app store. Where can I get it?
-
Issues configuring network-ups-tools with Powerware 5110
Been using Arch for about 24hrs now (It replaced RHEL5 which was running for 18mths) and I'm very impressed. Have found it very good for a new user, the extensive wiki's have been a huge help to get things going. Under RHEL I really needed to do a lot of google searching to get things working but have only had to do it twice for the same build under Arch. I was able to fix the first issue (wTorrent wiki missed install of php-sqlite) and now network-ups-tools.
I had it working 100% under RHEL so its not a device/hardware issue that I can see. But under Arch I keep getting connection lost messages after starting the ups daemon.
System can see a USB device
[root@fiorano ~]# lsusb
Bus 005 Device 002: ID 0592:0002 Powerware Corp. UPS (X-Slot)
[root@fiorano ~]# ls -l /dev/bus/usb/005/002
crw-rw-r-- 1 root nut 189, 513 Jan 3 16:44 /dev/bus/usb/005/002
Config files:
# nut.conf
MODE = standalone
# ups.conf
[myups]
driver = bcmxcp_usb
port = auto
desc = "Powerwave 5110"
# upsd.conf
no changes
# upsd.users
[monmaster]
password = 1
allowfrom = localhost
upsmon master
instcmds = ALL
# upsmon.conf
DEADTIME 15
FINALDELAY 5
HOSTSYNC 15
MINSUPPLIES 1
MONITOR myups@localhost 1 monmaster 1 master
NOCOMMWARNTIME 300
POLLFREQ 5
POLLFREQALERT 5
POWERDOWNFLAG /etc/killpower
RBWARNTIME 43200
SHUTDOWNCMD "/sbin/shutdown -h +0"
# upssched.conf
CMDSCRIPT /usr/local/ups/bin/upssched-cmd
# /etc/udev/rules.d/52-nut-usbups.rules
# various models - bcmxcp_usb
SYSFS{idVendor}=="0592", SYSFS{idProduct}=="0002", MODE="664", GROUP="nut"
I can communicate with the UPS and the process is being performed by the nut user so udev rules file is ok
[root@fiorano ups]# bcmxcp_usb -D -a myups
Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1)
USB communication subdriver 0.17
debug level is '1'
Shutdown delay longer than battery capacity when Low Battery warning is given. (max 60 seconds)
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
nut 1608 0.0 0.0 1800 788 pts/0 S+ 17:09 0:00 bcmxcp_usb -D -a myups
This time with more debug data....
[root@fiorano ups]# bcmxcp_usb -DDDDD -a myups
Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1)
USB communication subdriver 0.17
send_to_all: SETINFO driver.parameter.port "auto"
debug level is '5'
send_to_all: SETINFO ups.firmware "Cont:00.50 Inve:01.50"
send_to_all: SETINFO ups.power.nominal "700"
send_to_all: SETINFO output.phases "1"
send_to_all: SETINFO ups.model "POWERWARE UPS 700VA"
Length of meter map: 92
Index Offset Format NUT
0027 0000 51 output.frequency
0028 0004 51 input.frequency
0033 0008 51 battery.voltage
0041 0012 f0 None
0043 0016 f0 battery.charge.low
0047 0020 f0 None
0056 0024 f0 input.voltage
0065 0028 51 output.current
0068 0032 51 output.current.nominal
0078 0036 f0 output.voltage
Length of alarm map: 24
Index Alarm Supported
-001 INVERTER_AC_OVER_VOLTAGE No
-001 INVERTER_AC_UNDER_VOLTAGE No
-001 INVERTER_OVER_OR_UNDER_FREQ No
-001 BYPASS_AC_OVER_VOLTAGE No
-001 BYPASS_AC_UNDER_VOLTAGE No
-001 BYPASS_OVER_OR_UNDER_FREQ No
0000 INPUT_AC_OVER_VOLTAGE Yes
0001 INPUT_AC_UNDER_VOLTAGE Yes
0002 INPUT_UNDER_OR_OVER_FREQ Yes
-001 OUTPUT_OVER_VOLTAGE No
-001 OUTPUT_UNDER_VOLTAGE No
-001 OUTPUT_UNDER_OR_OVER_FREQ No
-001 REMOTE_EMERGENCY_PWR_OFF No
-001 REMOTE_GO_TO_BYPASS No
-001 BUILDING_ALARM_6 No
-001 BUILDING_ALARM_5 No
-001 BUILDING_ALARM_4 No
-001 BUILDING_ALARM_3 No
-001 BUILDING_ALARM_2 No
-001 BUILDING_ALARM_1 No
-001 STATIC_SWITCH_OVER_TEMP No
-001 CHARGER_OVER_TEMP No
-001 CHARGER_LOGIC_PWR_FAIL No
-001 CHARGER_OVER_VOLTAGE_OR_CURRENT No
-001 INVERTER_OVER_TEMP No
0003 OUTPUT_OVERLOAD Yes
-001 RECTIFIER_INPUT_OVER_CURRENT No
-001 INVERTER_OUTPUT_OVER_CURRENT No
-001 DC_LINK_OVER_VOLTAGE No
-001 DC_LINK_UNDER_VOLTAGE No
-001 RECTIFIER_FAILED No
-001 INVERTER_FAULT No
-001 BATTERY_CONNECTOR_FAIL No
-001 BYPASS_BREAKER_FAIL No
-001 CHARGER_FAIL No
-001 RAMP_UP_FAILED No
-001 STATIC_SWITCH_FAILED No
-001 ANALOG_AD_REF_FAIL No
-001 BYPASS_UNCALIBRATED No
-001 RECTIFIER_UNCALIBRATED No
-001 OUTPUT_UNCALIBRATED No
-001 INVERTER_UNCALIBRATED No
-001 DC_VOLT_UNCALIBRATED No
-001 OUTPUT_CURRENT_UNCALIBRATED No
-001 RECTIFIER_CURRENT_UNCALIBRATED No
-001 BATTERY_CURRENT_UNCALIBRATED No
-001 INVERTER_ON_OFF_STAT_FAIL No
-001 BATTERY_CURRENT_LIMIT No
-001 INVERTER_STARTUP_FAIL No
-001 ANALOG_BOARD_AD_STAT_FAIL No
-001 OUTPUT_CURRENT_OVER_100 No
-001 BATTERY_GROUND_FAULT No
-001 WAITING_FOR_CHARGER_SYNC No
-001 NV_RAM_FAIL No
-001 ANALOG_BOARD_AD_TIMEOUT No
0004 SHUTDOWN_IMMINENT Yes
0005 BATTERY_LOW Yes
0006 UTILITY_FAIL Yes
0007 OUTPUT_SHORT_CIRCUIT Yes
0008 UTILITY_NOT_PRESENT Yes
-001 FULL_TIME_CHARGING No
-001 FAST_BYPASS_COMMAND No
-001 AD_ERROR No
-001 INTERNAL_COM_FAIL No
-001 RECTIFIER_SELFTEST_FAIL No
-001 RECTIFIER_EEPROM_FAIL No
-001 RECTIFIER_EPROM_FAIL No
-001 INPUT_LINE_VOLTAGE_LOSS No
-001 BATTERY_DC_OVER_VOLTAGE No
-001 POWER_SUPPLY_OVER_TEMP No
-001 POWER_SUPPLY_FAIL No
-001 POWER_SUPPLY_5V_FAIL No
-001 POWER_SUPPLY_12V_FAIL No
-001 HEATSINK_OVER_TEMP No
-001 HEATSINK_TEMP_SENSOR_FAIL No
-001 RECTIFIER_CURRENT_OVER_125 No
-001 RECTIFIER_FAULT_INTERRUPT_FAIL No
-001 RECTIFIER_POWER_CAPASITOR_FAIL No
-001 INVERTER_PROGRAM_STACK_ERROR No
-001 INVERTER_BOARD_SELFTEST_FAIL No
-001 INVERTER_AD_SELFTEST_FAIL No
-001 INVERTER_RAM_SELFTEST_FAIL No
-001 NV_MEMORY_CHECKSUM_FAIL No
-001 PROGRAM_CHECKSUM_FAIL No
-001 INVERTER_CPU_SELFTEST_FAIL No
-001 NETWORK_NOT_RESPONDING No
-001 FRONT_PANEL_SELFTEST_FAIL No
-001 NODE_EEPROM_VERIFICATION_ERROR No
-001 OUTPUT_AC_OVER_VOLT_TEST_FAIL No
-001 OUTPUT_DC_OVER_VOLTAGE No
-001 INPUT_PHASE_ROTATION_ERROR No
-001 INVERTER_RAMP_UP_TEST_FAILED No
-001 INVERTER_OFF_COMMAND No
-001 INVERTER_ON_COMMAND No
-001 TO_BYPASS_COMMAND No
-001 FROM_BYPASS_COMMAND No
-001 AUTO_MODE_COMMAND No
-001 EMERGENCY_SHUTDOWN_COMMAND No
-001 SETUP_SWITCH_OPEN No
-001 INVERTER_OVER_VOLT_INT No
-001 INVERTER_UNDER_VOLT_INT No
-001 ABSOLUTE_DCOV_ACOV No
-001 PHASE_A_CURRENT_LIMIT No
-001 PHASE_B_CURRENT_LIMIT No
-001 PHASE_C_CURRENT_LIMIT No
-001 BYPASS_NOT_AVAILABLE No
-001 RECTIFIER_BREAKER_OPEN No
-001 BATTERY_CONTACTOR_OPEN No
-001 INVERTER_CONTACTOR_OPEN No
-001 BYPASS_BREAKER_OPEN No
-001 INV_BOARD_ACOV_INT_TEST_FAIL No
-001 INVERTER_OVER_TEMP_TRIP No
-001 INV_BOARD_ACUV_INT_TEST_FAIL No
-001 INVERTER_VOLTAGE_FEEDBACK_ERROR No
-001 DC_UNDER_VOLTAGE_TIMEOUT No
-001 AC_UNDER_VOLTAGE_TIMEOUT No
-001 DC_UNDER_VOLTAGE_WHILE_CHARGE No
-001 INVERTER_VOLTAGE_BIAS_ERROR No
-001 RECTIFIER_PHASE_ROTATION No
-001 BYPASS_PHASER_ROTATION No
-001 SYSTEM_INTERFACE_BOARD_FAIL No
-001 PARALLEL_BOARD_FAIL No
-001 LOST_LOAD_SHARING_PHASE_A No
-001 LOST_LOAD_SHARING_PHASE_B No
-001 LOST_LOAD_SHARING_PHASE_C No
-001 DC_OVER_VOLTAGE_TIMEOUT No
-001 BATTERY_TOTALLY_DISCHARGED No
-001 INVERTER_PHASE_BIAS_ERROR No
-001 INVERTER_VOLTAGE_BIAS_ERROR_2 No
-001 DC_LINK_BLEED_COMPLETE No
-001 LARGE_CHARGER_INPUT_CURRENT No
-001 INV_VOLT_TOO_LOW_FOR_RAMP_LEVEL No
-001 LOSS_OF_REDUNDANCY No
-001 LOSS_OF_SYNC_BUS No
-001 RECTIFIER_BREAKER_SHUNT_TRIP No
-001 LOSS_OF_CHARGER_SYNC No
-001 INVERTER_LOW_LEVEL_TEST_TIMEOUT No
-001 OUTPUT_BREAKER_OPEN No
-001 CONTROL_POWER_ON No
-001 INVERTER_ON No
-001 CHARGER_ON No
-001 BYPASS_ON No
-001 BYPASS_POWER_LOSS No
-001 ON_MANUAL_BYPASS No
-001 BYPASS_MANUAL_TURN_OFF No
-001 INVERTER_BLEEDING_DC_LINK_VOLT No
-001 CPU_ISR_ERROR No
-001 SYSTEM_ISR_RESTART No
-001 PARALLEL_DC No
-001 BATTERY_NEEDS_SERVICE No
-001 BATTERY_CHARGING No
-001 BATTERY_NOT_CHARGED No
-001 DISABLED_BATTERY_TIME No
-001 SERIES_7000_ENABLE No
-001 OTHER_UPS_ON No
-001 PARALLEL_INVERTER No
-001 UPS_IN_PARALLEL No
-001 OUTPUT_BREAKER_REALY_FAIL No
-001 CONTROL_POWER_OFF No
-001 LEVEL_2_OVERLOAD_PHASE_A No
-001 LEVEL_2_OVERLOAD_PHASE_B No
-001 LEVEL_2_OVERLOAD_PHASE_C No
-001 LEVEL_3_OVERLOAD_PHASE_A No
-001 LEVEL_3_OVERLOAD_PHASE_B No
-001 LEVEL_3_OVERLOAD_PHASE_C No
-001 LEVEL_4_OVERLOAD_PHASE_A No
-001 LEVEL_4_OVERLOAD_PHASE_B No
-001 LEVEL_4_OVERLOAD_PHASE_C No
0009 UPS_ON_BATTERY Yes
-001 UPS_ON_BYPASS No
-001 LOAD_DUMPED No
-001 LOAD_ON_INVERTER No
-001 UPS_ON_COMMAND No
-001 UPS_OFF_COMMAND No
-001 LOW_BATTERY_SHUTDOWN No
-001 AUTO_ON_ENABLED No
-001 SOFTWARE_INCOMPABILITY_DETECTED No
-001 INVERTER_TEMP_SENSOR_FAILED No
-001 DC_START_OCCURED No
-001 IN_PARALLEL_OPERATION No
-001 SYNCING_TO_BYPASS No
-001 RAMPING_UPS_UP No
-001 INVERTER_ON_DELAY No
-001 CHARGER_ON_DELAY No
-001 WAITING_FOR_UTIL_INPUT No
-001 CLOSE_BYPASS_BREAKER No
-001 TEMPORARY_BYPASS_OPERATION No
-001 SYNCING_TO_OUTPUT No
-001 BYPASS_FAILURE No
-001 AUTO_OFF_COMMAND_EXECUTED No
-001 AUTO_ON_COMMAND_EXECUTED No
0010 BATTERY_TEST_FAILED Yes
Lengt of Config_block: 64
Length of statistics map: 0
Lengt of command list: 22
Lengt of outlet_block: 0
Lengt of alarm_block: 11
send_to_all: SETINFO output.voltage.nominal "240"
send_to_all: SETINFO ups.serial ""
send_to_all: SETINFO input.voltage.nominal "240"
send_to_all: SETINFO input.frequency.nominal "50"
send_to_all: SETINFO input.frequency.low "45"
send_to_all: SETINFO input.frequency.high "55"
send_to_all: SETINFO input.transfer.boost.high "216"
send_to_all: SETINFO input.transfer.trim.low "260"
Shutdown delay longer than battery capacity when Low Battery warning is given. (max 60 seconds)
send_to_all: SETINFO ups.beeper.status "enabled"
send_to_all: SETINFO input.transfer.low "186"
send_to_all: SETINFO input.transfer.high "280"
send_to_all: SETINFO ambient.temperature.high "1"
send_to_all: ADDCMD shutdown.return
send_to_all: ADDCMD shutdown.stayoff
send_to_all: ADDCMD test.battery.start
send_to_all: SETINFO output.frequency " 49.9"
send_to_all: SETINFO input.frequency " 49.9"
send_to_all: SETINFO battery.voltage " 13.5"
send_to_all: SETINFO battery.charge.low "11"
send_to_all: SETINFO input.voltage "234"
send_to_all: SETINFO output.current " 0.3"
send_to_all: SETINFO output.current.nominal " 1.8"
send_to_all: SETINFO output.voltage "234"
send_to_all: SETINFO ups.load " 16.7"
send_to_all: SETINFO ups.status "OL"
send_to_all: DATAOK
dstate_init: sock /var/state/ups/bcmxcp_usb-myups open on fd 5
send_to_all: SETINFO driver.version "2.4.1"
send_to_all: SETINFO driver.version.internal "0.21"
send_to_all: SETINFO driver.name "bcmxcp_usb"
send_to_all: SETINFO driver.parameter.pollinterval "2"
send_to_all: SETINFO input.voltage "236"
send_to_all: SETINFO output.voltage "236"
send_to_all: SETINFO battery.voltage " 13.7"
send_to_all: SETINFO input.voltage "234"
send_to_all: SETINFO output.voltage "234"
send_to_all: SETINFO input.voltage "236"
send_to_all: SETINFO output.voltage "236"
^CSignal 2: exiting
But starting the daemon and things fail...
:: Starting UPSd Daemon [DONE]
[root@fiorano ups]#
Broadcast message from nut (Sun Jan 3 17:24:55 2010):
Communications with UPS myups@localhost lost
Broadcast message from nut (Sun Jan 3 17:25:00 2010):
UPS myups@localhost is unavailable
Here are my daemon and message logs, showing a comms issue with the UPS but I am using the exact same settings as my previous OS build?
[root@fiorano ~]# tail -f /var/log/messages.log
Jan 3 17:24:55 fiorano bcmxcp_usb[1730]: Startup successful
Jan 3 17:24:55 fiorano upsd[1731]: listening on 127.0.0.1 port 3493
Jan 3 17:24:55 fiorano upsmon[1735]: Startup successful
Jan 3 17:24:55 fiorano upsmon[1737]: Communications with UPS myups@localhost lost
Jan 3 17:24:55 fiorano wall[1739]: wall: user nut broadcasted 1 lines (46 chars)
Jan 3 17:25:00 fiorano upsmon[1737]: UPS myups@localhost is unavailable
Jan 3 17:25:00 fiorano wall[1742]: wall: user nut broadcasted 1 lines (36 chars)
[root@fiorano ~]# tail -f /var/log/daemon.log
Jan 3 17:24:55 fiorano bcmxcp_usb[1730]: Startup successful
Jan 3 17:24:55 fiorano upsd[1731]: listening on 127.0.0.1 port 3493
Jan 3 17:24:55 fiorano upsd[1731]: not listening on ::1 port 3493
Jan 3 17:24:55 fiorano upsmon[1735]: Startup successful
Jan 3 17:24:55 fiorano upsmon[1737]: UPS [myups@localhost]: connect failed: Connection failure: Connection refused
Jan 3 17:24:55 fiorano upsmon[1737]: Communications with UPS myups@localhost lost
Jan 3 17:25:00 fiorano upsmon[1737]: UPS [myups@localhost]: connect failed: Connection failure: Connection refused
Jan 3 17:25:00 fiorano upsmon[1737]: UPS myups@localhost is unavailable
Jan 3 17:25:05 fiorano upsmon[1737]: UPS [myups@localhost]: connect failed: Connection failure: Connection refused
Jan 3 17:25:10 fiorano upsmon[1737]: UPS [myups@localhost]: connect failed: Connection failure: Connection refused
Jan 3 17:25:15 fiorano upsmon[1737]: UPS [myups@localhost]: connect failed: Connection failure: Connection refused
Hopefully someone can point me in the right direction to get this fixed. I did not install any packages manually, everything has been done via pacman (system is fully up to date as per the time of this post.)R00KIE wrote:I think you should make it 775
Didn't help.
R00KIE wrote:Can you post the script you call in /etc/rc.d to start/stop/restart the service? Maybe someone can spot a problem there.
Sure, it was put there by the package retrieved from the default repo by pacman as was everything else. All I did was modify a few files in /etc/ups so all user/permissions etc should be setup correctly by the package?
[root@fiorano ~]# less /etc/rc.d/upsd
#!/bin/bash
. /etc/rc.conf
. /etc/rc.d/functions
PID=`pidof -o %PPID /usr/sbin/upsd`
case "$1" in
start)
stat_busy "Starting UPSd Daemon"
/usr/bin/upsdrvctl start &> /dev/null
[ -z "$PID" ] && /usr/sbin/upsd &>/dev/null
/usr/sbin/upsmon &>/dev/null
if [ $? -gt 0 ]; then
stat_fail
else
add_daemon upsd
stat_done
fi
stop)
stat_busy "Stopping UPSd Daemon"
/usr/bin/upsdrvctl stop &> /dev/null
/usr/sbin/upsmon -c stop &> /dev/null
[ ! -z "$PID" ] && kill $PID &> /dev/null
if [ $? -gt 0 ]; then
stat_fail
else
rm_daemon upsd
stat_done
fi
restart)
$0 stop
sleep 3
$0 start
echo "usage: $0 {start|stop|restart}"
esac
exit 0
R00KIE wrote:Maybe someone more experienced in debugging these kind of problems can help, I'm all out of ideas now.
Hopefully someone else stops by, but really appreciate your help. I'm sure its something small that I'm overlooking!
R00KIE wrote:forget about your config files for a moment and try something different and check if it works
Things is, NUT is fairly simple to begin with, there is really only 3 items you need to get it to work that I can see. The UPS driver, upsd user and monitor line. -
HI!
I'm starting a project in which I have a low rate stream of data to read in a real time environment. I should store these data on a network hard disk without any PC with standard OS, I just have CompactRIO RTOS. How can I send this data to the network drive? Is it possible to just “write” data like I do for a standard file in LabView?
Thanks for any help!!
Il Conte
dr. Valentino TontodonatoIl Conte,
you have to keep in mind that normally the RT OS does not map drives other than the Compact Flash that it has onboard (C:\). There are exceptions such as
-cFP-20xx which may have additional Flash Drives which can be addressed as D:\ Drive
-CVS systems with IEEE-1394 interface can write/read to Firewire external Harddrives
-PXI Controllers booted from a Floppy disk may map the floppy drive as A:\
One solution to your needings may be to write data to files locally on your onboard CompactFlash and then transfer these files to a network location using FTP, provided the network drive you are pointing to supports FTP.
Let us know if you need any more help with this,
AlessioD
National Instruments -
Copy any kind of file from content server to network directory
Helli All
The question:
I nee to copy any kind of file from content server to any network directory.
Explanation
1. transaction CV02N
2. There is attached file for a document in tab "Document data/Original"
3. This file stored in content server
4. I wrote program code that creates path of the stored file that finally looks like
http://cont:8888/ContentServer.dll?get&Version=.....*...&compid=app1.doc
where app1.doc is file's name and I have to copy this file into network directory.
The problem is that this URL open the file instead of just pointing to him
so that no function or method can't see this file and as the result I got message that
the file doesn\t exist.
Please, advice.
Regards,
Daniel.many many thanks for ur help. i really did not check the URLClassLoader properly.
but i would like to hear a little more from u. i have another question. here in this code (provided earlier), i searched for attribute values in the manifest file, then again i load the required class file from the very url. is it not good to retrieve the whole jar file first, and then check attribute values inside manifest file and load the required class files from that jar file that is already downloaded without going to that url again? how can i do this? -
Problem setting up Solaris 10 Networking / Internet
Hello,
This is my first time ever setting up a linux and havent spent more than a few hours ever using one.
Im looking for a step by step guide to start fresh and set up a network on a cable line running a dlink router and router ip is 192.168.0.1 like a normal dlink.
Any help, advice, or basic knowledge would also be apprciated.
I have already searched as much as possible of this and other forums with no luck.
Help would be wonderful.
Thanks.Let start from 1st...
Log in as root & Open terminal & then type
# sys-unconfig
then it will ask : Y/n' & then write ' y" & press enter...
after that you will not see any display in your monitor for a moment.. & then your screen is lock & enter root password for unlock.. Then your system will reboot..
After that ,
1.enter host name
2. then it will ask " Network " & there is two option " Yes/no"
select yes & press F2.
3. Then it will ask for netwok interfence..
It depends How many NIC card you have in your system...
then select any one. & continue..
after that.. Give your system ip , (e.g: 192.168.1.1)
then select its a part of subnet..
Then when it shows " Specify Router add" then you will enter ur router i.p.
192.168.0.1
then In the field of Name service select
: DNS " & enter nameserver ip of ur isp...(eg. 61.1.1.96.69)
then cont..
After finishing this configartion , you will need to configure your modem...
open browser & enter http://192.168.0.1
then config ur modem/router from there........
then it will be done.......
Do this way, If you have any problem please let me know.....
Thanks
Partha -
Setting Up Mailserver to received and Send Mail for external Network
I have a G5 currenty running 10.3.9 Server with Mail services run and working fine, we are upgrading to 10.4 Server and would like our Sales Reps the ability to send and Receive mail from outside the office. How do I configure my server, Router, ISP and/or Mail clients to do this??? we are currently able to recieve mail from outside just not send.
I cannot find the Line #submission inet n - n -- smtpd in the Main.CF file...here is what I get when I open it
# Global Postfix configuration file. This file lists only a subset
# of all 250+ parameters. See the sample-xxx.cf files for a full list.
# The general format is lines with parameter = value pairs. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.
# SOFT BOUNCE
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#soft_bounce = no
# LOCAL PATHNAME INFORMATION
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
queue_directory = /private/var/spool/postfix
# The command_directory parameter specifies the location of all
# postXXX commands.
command_directory = /usr/sbin
# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
daemon_directory = /usr/libexec/postfix
# QUEUE AND PROCESS OWNERSHIP
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
mail_owner = postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#default_privs = nobody
# INTERNET HOST AND DOMAIN NAMES
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#mydomain = domain.tld
# SENDING MAIL
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# [email protected].
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#myorigin = $myhostname
#myorigin = $mydomain
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
# Note: you need to stop/start Postfix when this parameter changes.
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4
# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain.
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see sample-virtual.cf).
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# sample-smtpd.cf).
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#mydestination = $myhostname, localhost.$mydomain
#mydestination = $myhostname, localhost.$mydomain $mydomain
#mydestination = $myhostname, localhost.$mydomain, $mydomain,
# mail.$mydomain, www.$mydomain, ftp.$mydomain
# REJECTING MAIL FOR UNKNOWN LOCAL USERS
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination and $inet_interfaces.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
# - You define $mydestination domain recipients in files other than
# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
# For example, you define $mydestination domain recipients in
# the $virtual_mailbox_maps files.
# - You redefine the local delivery agent in master.cf.
# - You redefine the "local_transport" setting in main.cf.
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
# feature of the Postfix local delivery agent (see sample-local.cf).
# Details are described in the LOCAL_RECIPIENT_README file.
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a [email protected] address.
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =
# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# $inet_interfaces, while $local_recipient_maps is non-empty and the
# recipient address or address local-part is not found.
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#unknown_local_recipient_reject_code = 550
unknown_local_recipient_reject_code = 450
# TRUST AND RELAY CONTROL
# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in file sample-smtpd.cf.
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host
# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table
# The relay_domains parameter restricts what destinations this system will
# relay mail to. See the smtpd_recipient_restrictions restriction in the
# file sample-smtpd.cf for detailed information.
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
# subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction in the file sample-smtpd.cf.
#relay_domains = $mydestination
# INTERNET OR INTRANET
# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
# If you're connected via UUCP, see also the default_transport parameter.
#relayhost = $mydomain
#relayhost = gateway.my.domain
#relayhost = uucphost
#relayhost = [an.ip.add.ress]
# REJECTING UNKNOWN RELAY USERS
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a [email protected] address.
#relay_recipient_maps = hash:/etc/postfix/relay_recipients
# INPUT RATE CONTROL
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 50 SMTP server process
# limit, this limits the mail inflow to 50 messages a second more
# than the number of messages delivered per second.
# Specify 0 to disable the feature. Valid delays are 0..10.
#in_flow_delay = 1s
# ADDRESS REWRITING
# Insert text from sample-rewrite.cf if you need to do address
# masquerading.
# Insert text from sample-canonical.cf if you need to do address
# rewriting, or if you need username->Firstname.Lastname mapping.
# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
# Insert text from sample-virtual.cf if you need virtual domain support.
# "USER HAS MOVED" BOUNCE MESSAGES
# Insert text from sample-relocated.cf if you need "user has moved"
# style bounce messages. Alternatively, you can bounce recipients
# with an SMTP server access table. See sample-smtpd.cf.
# TRANSPORT MAP
# Insert text from sample-transport.cf if you need explicit routing.
# ALIAS DATABASE
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases
# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
# ADDRESS EXTENSIONS (e.g., user+foo)
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#recipient_delimiter = +
# DELIVERY TO MAILBOX
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
# "Maildir/" for qmail-style delivery (the / is required).
#home_mailbox = Mailbox
#home_mailbox = Maildir/
# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail
# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception: delivery for root is done as $default_user.
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"
# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#mailbox_transport = lmtp:unix:/file/name
#mailbox_transport = cyrus
# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =
# The luser_relay parameter specifies an optional destination address
# for unknown recipients. By default, mail for unknown@$mydestination
# and unknown@[$inet_interfaces] is returned as undeliverable.
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
# luser_relay works only for the default Postfix local delivery agent.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#luser_relay = [email protected]
#luser_relay = [email protected]
#luser_relay = admin+$local
# JUNK MAIL CONTROLS
# The controls listed here are only a very small subset. See the file
# sample-smtpd.cf for an elaborate list of anti-UCE controls.
# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
# For details, see the sample-filter.cf file.
#header_checks = regexp:/etc/postfix/header_checks
# FAST ETRN SERVICE
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# By default, Postfix maintains deferred mail logfile information
# only for destinations that Postfix is willing to relay to (as
# specified in the relay_domains parameter). For other destinations,
# Postfix attempts to deliver ALL queued mail after receiving the
# SMTP "ETRN domain.tld" command, or after execution of "sendmail
# -qRdomain.tld". This can be slow when a lot of mail is queued.
# The fast_flush_domains parameter controls what destinations are
# eligible for this "fast ETRN/sendmail -qR" service.
#fast_flush_domains = $relay_domains
#fast_flush_domains =
# SHOW SOFTWARE VERSION OR NOT
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
# PARALLEL DELIVERY TO THE SAME DESTINATION
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter. The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.
#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 10
# DEBUGGING CONTROL
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
debug_peer_level = 2
# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain
# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
debugger_command =
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
xxgdb $daemon_directory/$process_name $process_id & sleep 5
# If you don't have X installed on the Postfix machine, try:
# debugger_command =
# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
# >$config_directory/$process_name.$process_id.log & sleep 5
# INSTALL-TIME CONFIGURATION INFORMATION
# The following parameters are used when installing a new Postfix version.
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
sendmail_path = /usr/sbin/sendmail
# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
newaliases_path = /usr/bin/newaliases
# mailq_path: The full pathname of the Postfix mailq command. This
# is the Sendmail-compatible mail queue listing command.
mailq_path = /usr/bin/mailq
# setgid_group: The group for mail submission and queue management
# commands. This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
setgid_group = postdrop
# manpage_directory: The location of the Postfix on-line manual pages.
manpage_directory = /usr/share/man
# sample_directory: The location of the Postfix sample configuration files.
sample_directory = /usr/share/doc/postfix/examples
# readme_directory: The location of the Postfix README files.
readme_directory = /usr/share/doc/postfix
# THE FOLLOWING DEFAULTS ARE SET BY APPLE
# bind to localhost only
inet_interfaces = all
# turn off relaying for local subnet
mynetworks_style = host
# mydomain_fallback: optional domain to use if mydomain is not set and
# myhostname is not fully qualified. It is ignored if neither are true.
mydomain_fallback = localhost
myhostname = jamestownpress.com
mailbox_transport = cyrus
enable_server_options = yes
luser_relay =
maps_rbl_domains = dun.dnsrbl.net
message_size_limit = 0
mydestination = $myhostname,localhost.$mydomain
smtpd_use_tls = no
smtpd_enforce_tls = no
smtpd_tls_loglevel = 0
smtpd_sasl_auth_enable = yes
smtpd_use_pw_server = yes
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination,permit
smtpd_pw_server_security_options = plain
server_enabled = 1
relayhost =
smtpd_client_restrictions = permit_mynetworks reject_rbl_client dun.dnsrbl.net permit
always_bcc =
mynetworks = 127.0.0.1/32,192.168.0.0/16,192.168.1.98,192.168.1.3,192.168.1.13,192.168.1.5,1 92.168.1.22,192.168.1.18,192.168.1.41
content_filter = smtp-amavis:[127.0.0.1]:10024
so what do I need to change -
DBACOCKPIT job error when running backup job to LAN network folder
Hello all
I have set up a network location through MSSQL Server Management Studio from
Server Objects -> Backup devices
and using SQL Server Managemnt Studio i can backup Full or Log to that network locaion.
When in SAP using DBACOCKPIT i can see the backup device which i defined in the SQL but when i run a job to backup FULL or LOG then i get the following error :
SQL Job information ******************************
Jobname: SAP CCMS Full DB Backup of master,msdb,GDW [20110725095438-1-095438]
Type: TSQL
DB-Name: GDW
For Run: 20110725 09:54:38
Job history information *****************************
Stepname: CCMS-step 1
Command: declare @exeStmt nvarchar(2000) exec gdw.sap_backup_databases @dbList=
"master,msdb,GDW",@r3Db="GDW",@bDev="@FisticFULL",@expDays= 27,@jobNam
e= "SAP CCMS Full DB Backup of master,msdb,GDW [20110725095438-1-09543
8]",@bkupChecksum="N",@bkupCompress="N",@bkupType="F",@nativeBkup="N",
@exeDate = "20110725095438",@bkupSim = "N",@format = 0,@init = 0,@bkup
Db = "master",@unload = 0,@exeStmt = @exeStmt OUTPUT
Status: (failure)
Message: 2528
Severity: 15
Duration: 0 hours(s) 0 min(s) 0 sec(s)
Last msg: Executed as user: NT AUTHORITY\SYSTEM. Must declare the scalar variabl
e "@FisticFULL". [SQLSTATE 42000] (Error 137) Incorrect syntax near t
he keyword 'with'. If this statement is a common table expression, an
xmlnamespaces clause or a change tracking context clause, the previous
statement must be terminated with a semicolon. [SQLSTATE 42000] (Erro
r 319) DBCC execution completed. If DBCC printed error messages, cont
act your system administrator. [SQLSTATE 01000] (Error 2528). The ste
p failed.
<----
End of Job Step History -
>
Job history information *****************************
any ideas?
thx in advanceHello Marcus
I went to the link which you mentioned and there is nothing mentioned about hot to give rights to the user NTAUTHORITY\SYSTEM in order to do network backup.
I have done the following:
at server A which i my backup server i have a folder which i have it shared with full permissions for everyone.
At the SECURITY there is also full rights for everyone and for local admins.
From Server B i went to services and i stoped the SQL SERVER service and i set it up to log on with a user which has Administrator rights in the DOMAIN.
From server B i logged on with administrator and i defined at the SQL Server Management Studio at Server Objects -> Backup devices a new backup device with the network path.
The thing is that i have to go with windows explorer to the network location of where i want to do backup in order to put my domain username and password and after i can run the backup by the SQL Server Management Studio.
Do you know where do i need to give authority to NTAUTHORITY\SYSTEM in order for my backup to work from the SAP - DBACOCKPIT?
thx in advance. -
Is there anyway to make a PC look like a PLC on a Profibus network?
We currently have a PC based data acquisition system. A customer has asked us to integrate the PC into their PLC (Profibus) network and make it appear as though it (the PC) is a slave on the profibus.
I have found some interfaces that convert profibus to ethernet but haven't found anything, short of the NI Applicon boards (and others), that allow me to go the other way. As I only want to be a relatively stupid slave on the profibus, I was wondering if there isn't a more economical solution.
Any comments, suggestions, directions, etc. would be helpful as I'm starting from scratch and am not sure where to go with this...
Kind Regards,
EricHi, Del Conte
I've looked at: http://www.sea.siemens.com/machine/products/cnc/prod_810d.html#1523 and have seen that this CNC consist of Numerical processor, power units and has integrated PLC S7. And there is possibility to connect this PLC to PC through Profibus. I didn't remeber if inside of Softnet exist OPC Server. You can check it in Simatic NET Configuration Console. Siemens doesn't provide any drivers for LV to their CP5611 card. Comunnication idea relay on using OPC Server. OPC Server establish and continue data exchange between PLC and PC. Labview has OPC Client features by means of DataSocked or DSC module to get/put the data. If you give me your PLC configuration (series numbers of all PLC modules on the rack from left to right ,e.g. - 6ES7315-2AG10-0AB0) I can prepare to you connection configuration PLC - PC. Moreover you have to have STEP7 Programming Software and Simatic NET Software to download PLC configuration into PLC.
Regards. Rumcajs -
when i try to sign on to to I message I get the error message. IMESsage activation, could not sign in. Please check your network connection and try again. I have a network connection and can access the internet. what do i need to do?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Having a problem setting up face time and iMessage o iPad. . Keep getting message "could not sign in. Please check your network connection and try again". Please help
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom
Maybe you are looking for
-
Creating webi/crystal report on BEx and retrieving data, an error ocured?
Hi Experts, I have a problem which many couldnt able to provide a better solution and solve it. Need your expert solutions. Installed SAP BI with BO(R/3) integration kit SP3. Created WEBI report on BEx report via Universe. While trying to load/ refre
-
How do I get a movie clip to follow the cursor?
Hi guys, What I want: Is a simple action where I have my company logo in the middle of the screen and it follows the cursor (not over the whole screen but within invisible borders). What I use: I have Flash Pro CS5, code is Actionscript 3.0 and my co
-
Did any one come accrossed with the bug no 1328999 in oracle 8.1.6.0.0 on solaries. If any one please reply me. Actually my problem is i am getting too many deadlocks in my application i am using MTS (Microsoft Transaction server as application serve
-
I am new to Apple products and I am trying to transfer my contacts to my iphone from a Casio G'zOne phone but I keep getting Connection Unsuccessful. How do I transfer the contacts?
-
Hi everyone, actually I make an intership in a society and it's my last week. And durinf more than 4 weeks, I hardly tried to print a Jpanel in A3 format. So I explain more : my JPanel has 3 parts : one with textarea, JLabel, JTextfield... and the tw