Networking two sites together

Hello,
Please i have a router series of 1700's. i have fixed the voice card.Please can you put me through with the configuration to connect the two site together,pleease help.All your is highly appreciated

Hi Will
Can you post out the output of the show version command taken out from both the routers ..
That will help us to understand the exact card model installed in the router and will be easy to suggest on configuring the same..
regds

Similar Messages

Join two sites together

Hi, i have two dynamic websites each connecting to two
separate databases via separate connections. I have tried merging
the two sites into one, but i get a problem because the database
connection for one of the sites dont work after i join them. Can
anyone please tell me the best way to join two dynamic sites
together, so that both their databases work.
thank you

the best way to do it is to create a DSN connection but you
have to make
sure that they are on the same server
if both the websites are on the same server that it can be
easily done using
DSN connection

Networking two mac pros together?

i just bought a 2012 and did a fresh install of yosemite and have a 2006 that is running lion.
i have migrated my data over to the 2012 and plan to wipe the 2006 of the data so i don't get confused. i expect to have a number of backups on the shelf and don't plan to get these into circulation again until i am confident the 2012 is running properly.
is it possible to network these two machines together in some way while i am working in yosemite so that i can periodically grab data from the HOME FOLDER in Lion?
can i run an ethernet into my TIME CAPSULE from both machines and see the 2006 from the 2012? i mean, presumably i would have to keep the 2006 running even if i can't see it on the monitor? or do i have to somehow get set up with a keyboard and monitor on the 2006 and boot into disk mode to do this??
for some reason i am thinking this would be a nice way to get myself running on yosemite and i am imagining i don't need to boot into LION (say by buying a KVM switch) at least for the time being.
will this work?

If you can connect each of them to the Internet without re-cabling, you have all the infrastructure needed for File Sharing and Screen Sharing.
Then all you have to do is use System Preferences > Sharing to turn on what you want. I suggest you enable File Sharing in both directions, because that is sometimes handy later when debugging. File Sharing allows you to mount the shared items from the remote Mac on your local Mac as if they were a drive on your local Mac.
The dialog box presented when initiating a File sharing connection is requesting credentials (username and password) to access files on the REMOTE Mac, even though that dialog box appears on the local Mac. Also, the number of bullets in the password field is arbitrary -- neither Mac knows the length of the password.
How to connect with File Sharing on your Mac - Apple Support

Linking Two Folders Together

Hi,
I have a 13" MacBook Air Mid 2013, 128GB, 4GB RAM, 1.3 GHz, OS X 10.10 Yosemite.
When I put a folder in iCloud Drive, the folder is in iCloud Drive and on my Desktop. What I want to do is link the two folders together so when I save a file in the folder on my desktop, it puts it in the folder that's in iCloud Drive too. I hope I have explained this good enough.
Please help.
Thanks

If you own both and have admin accounts on them, yes. On the "other" computer, go to System Preferences, Sharing, and turn on File Sharing.
When the two computers are on the same network, you should see the other computer appear in your sidebar in Finder. Click it, authenticate with your admin details (from the other computer), and you now have access to its files.
Matt

Linking two computers together

Can I link two macs together so I have access to both but the other computer doesn't have access to mine?

If you own both and have admin accounts on them, yes. On the "other" computer, go to System Preferences, Sharing, and turn on File Sharing.
When the two computers are on the same network, you should see the other computer appear in your sidebar in Finder. Click it, authenticate with your admin details (from the other computer), and you now have access to its files.
Matt

How to network two iMacs

What exactly do I need to do to network my two iMacs together?

iMac G4 800MHz & iMac G4 700MHz
They are in the same small room together, both wired.
The 800 has a Linksys broadband router and a Motorola cable modem hooked to it.
I guess I would need to get an airport card for the 700 to access the router hooked to the 800.
If I can't do that, I'd at least like to know how to connect the two iMacs together so I can put files from the 700 on the 800 so I can email them.
What do I need?

Connecting two sites

Hello,
I need to connect 2 sites together by using Wireless solution...
I'm thinking of using two wireless routers (1800 series) in order to isolate the LANs in both sites, and just allowing necessary bandwidth to pass through.
There is no need for any other services beside routing traffic between the 2 sites.
I'm confused in choosing the right model so please advice me...
Thanks

Take a look at the BR1310 or the BR1410. These are designed to be bridges.

Trying to network two home computers with RT31P2

Hey everyone. I'm having a maddening time trying to network two home computers together. As it stands there are three total computers in the household. Desktop A, Desktop B, and a Laptop. As it stands, the Laptop and Desktop A can interact with each other using the "Workgroups" function. However, I can't get Desktop B to interact with either of the others. It just so happens that Desktop B is running Vista, while the other two use XP.
So to recap:
Desktop A uses XP
Desktop B uses Vista
Laptop uses XP
Using a RT31P2 Broadband Router (which the two desktops are connected to)
And a WAP54G Wireless-G access point (for the laptop)
How can I get Desktop B to interact with the other two? My main goal is for Desktop A and the Laptop to be able to connect to Desktop B to share files and use it's printer.

The very first thing you need to be able to ping the ip address of individual pc from another one & also make sure that you disable the firewalls on all the pc's & you need to enable file & printer sharing on your pc & you should be able to interact each pc from another one.

How do I connect two lines together.

I have two lines at an angle but where the corner of the angle is supposed to be there is a little triangle missing. I tried joining the two lines together but when I hit join one line goes past the other.
Before Joining:
After Joining:

There is no need to lock one of the paths, because you do not have to tediously select endpoints just to join paths. Doing so was necessary in Illustrator for most of its history, but it finally (decades behind other drawing programs) gained the ability to join paths at their nearest endpoints by just selecting the paths.
Undo (or cut) the unwanted join.
Black pointer: Select the left and right paths.
Join.
Alternativley, when drawing line art, it is not uncommon to set your default Graphic Style to use rounded endcaps. That negates the problem of the "missing triangle" (as you call it) appearance of coincident straight end caps.
JET

How to network two macs wirelessly

Need simple instructions on how to network two macs wirelessly

Animal,
Please describe what you are trying to do and what the goal is, if you simply want to share files then turn on File Sharing on both computer. Apple explains this in their File sharing article.

Using iWeb to publish to two sites separately

Here's my situation: I purchased a Family Pack .mac so I get 5 sites. I will use one for my own use, my wife will use one, and my son will use one.
We would like to use one of the two remaining accounts primarily to put up a website for a friend of ours who is working as a missionary in Africa.
So on my wife's computer, we want to use iWeb to build two sites, publish one in one .mac account and publish the other in another .mac account.
So far iWeb keeps publishing them in the same account.
Any ideas?

The easiest thing for you to do would be to create a separate account on your wife's computer for this additional .Mac account that you wish to publish to. You can add this System account under System Preferences>Accounts. Then log into this account and add the additional .Mac information into the System Preferences there. Launch iWeb and create your page. When you publish, it will be published using the extra .Mac account.
This way...no juggling of Domain files. No switching back and forth of .Mac account information. Just log into the separate account to edit and publish this separate website on this .Mac account. Then your wife can log back into her own account to edit her own websites. Easy.

Want to have two sites on .Mac made with iWeb

I have two folders on my iDisk in the Sites folder with different names. How do I get two different URL's for each website.
So with two folders each titled different can I use the folder names like
http://web.mac.com/foldername/welcome.html
http://web.mac.com/foldername-1/welcome.html
Just got iWeb the other day, I've been using DreamWeaver so I'm new to this simplicity. I'm used to working on Linux webserver too. My old URLs used to be www.name.com/index.html and so forth now this .mac subdomain is tricking me out
Any help is appreciated.
Internet Wiz™

I think everyone will want to know how to do this. I am intested in working on more than two sites and publishing them not on a .Mac account.
What I have begun to do as a work-around is to label the sites by the domain name (xyz.com and abc.com) and then publish them to a separate iweb folder.
Of course the gotcha is that when you publish to an external folder you need to set the url - so each time you publish to a folder you need to set the url correctly for the domain you are working on.
Once published to the iweb folder you then upload the indvidiual files for the particular domain and you are set.
Too bad you can't work on mulitple sites, just highlight the site you want to publish to a folder and then have only that site published.
This is how I expected it to work.
hope this helps,
Dan

How do I "fuse" two photos together in elements?

I would like to "fuse" two photos together; how do I do this in elements?http://[email protected]

Please amplify what you are trying to do.
Do you wish to add an object from photo A to photo B, for example?

How to know whether a row is upto date in two site ?

Hi all,
My application need to check whether a record is same in two sites. I need to do this using a SQL query or a stored procedure. I saw the DBMS_RECTIFIER_DIFF package but it seems that it won't tell that whether that row is upto date.
Any help is appreciated.
rgds
Antony Paul

Hi,
If you want to check you can just go to the website
http://europa.eu/abc/european_countries/index_en.htm
and check .
Close the thread if it solves your purpose.
Award Points if it helps.
-Gaurang

Linking two switches together.

hi Guys ,
quick question in relation to joining two switches together,
can I link a 2950 switch with a 1000 BASE-SX with a 3560G with 4 SPF ports with fibre and what pitfalls should i look out for .
Thanks in advance
Kevin

Hello,
So you would like to connect GBIC to SFP, you need Multimode Duplex Fiber Optical cable with SC-LC connectors. If SFP to SFP you need the same cably type with LC-LC connectors.
http://www.cisco.com/en/US/products/hw/routers/ps341/prod_module_installation_guide09186a00801cc731.html
http://cisco.com/en/US/products/hw/modules/ps5455/products_data_sheet09186a008014cb5e.html
bye
FCS
Please rate me if I helped.

Networking two sites together

Similar Messages

Maybe you are looking for