Networking using mac osx to pc
How do i set up a networking system where i can view what is on my mac osx computer on my pc labtop? Another words my mac computer will be on and running but i will be doing all the command from my labtop (pc)
IS IT POSSIBLE TO DO THIS? PLEASE LET ME KNOW HOW AND WHAT I NEED TO DO TO GET THIS JOB DONE
http://joelshoemaker.com/computer/mac/macfilesharing.html
http://joelshoemaker.com/computer/mac/pcfilesharing.html
http://www.ifelix.co.uk/tech/3001.html
These should help. Don
Similar Messages
-
I'm using mac OSX 10.9.5 to write to NAS, I need to decrease the SMB max MTU size used by the OSX
I'm using mac OSX 10.9.5 to write to NAS, I need to decrease the SMB max MTU size used by the OSX
By default, OS X Mavericks 10.9.5 Network MTU is set to 1500. If you perform the following at your SMB server, with an MTU of 1500, you will likely receive Message too long, and the SMB share takes a very long while to mount. This might be the contributing factor that has you believe it is an SMB MTU configuration issue.
ping -c 1 -D -s 1500 smbserver
If you dial the Network MTU down in a custom setting, the ping is immediate, and the SMB share mounts briskly. I tried values in small decrements until the message too long ceased.
ping -c 1 -D -s 1472 smbserver
I have done some searching and I do not see how, in Apple's current SMB implementation, that one can configure /etc/nsmb.conf to reduce SMB MTU size. See man nsmb.conf.
More on this subject. -
I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?
It is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This might be of some interest to you at this time: Life After MobileMe.
OT -
Hello,
I'm having trouble setting up a VPN using MAC OSX 10.4.11 Server. I have and XSAN system and one of my volumes has been down for quite a while now. There is a very kind MAC IT professional that is willing to help be troubleshoot my system but he needs to be able to access my system remotely. I am able to connect the MDC to DSL but I haven't been able to set up the VPN. Please help, this is an emergency. Thanks!
Marcohave you forwared the ports on your router? Why not let him in via teamviewer? its free and mac compatable
-
Setting up a small business network using mac and windows pcs
Setting up a small business network using mac and windows??
Ok that sounds great. What is your actual question as it relates to AirPort networking? Is it: Can I set up a wired/wireless network with an AirPort base station that support multiple Mac & PC clients? If so the answer is yes.
If, instead, it is how to I configure an AirPort network to support a small business you will have to provide more details on both your networking & computing equipment in order for any of us to help you. -
I have a iMac (Not under warranty) its Bluetooth is not working. Blue tooth Hardware is failed and Replacement is huge cost,I need a Bluetooth Adapter for it. I am using Mac OSX 10.9
Apple used to recommend this but now say it's not compatible.
OWC have IOGear GBU421W6 Bluetooth 2.1 USB Micro Adapter and IOGear GBU321 Bluetooth USB Adapter, & should be able to confirm whether or not they'll work for you. -
I wonder if somebody can help me. I am not able to use my internet bank anymore, since Java launched their latest update (7.51) a few days ago. Appearently this one is not compatible with my hardware. I am using Mac OSX version 10.6.8, and Java version 17.0, which seems to be the newest one for my op sys. Anybody know how I can solve this? In advance thank you!
Apple support article to enable Java 6.
Java 6 Enable -
Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections such as options. Does anyone know their way around this obstacle? Am I doing anything wrong? Thanks
Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
Thanks for your helpfulness, anyway.
And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable. -
I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection. The two macs cannot find each other. any suggestions
Try this article - http://support.apple.com/kb/HT4889.
If it doesn't help, post back in this thread.
Best of luck,
Clinton -
Hi, I'm using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Have cleared space, checked Window - Doctor and server has green light. Mail Activity shows 47 emails waiting to download, iPad and iPhone download them all OK - no extra big files stopping the download either. In the past, quitting mail has worked, but not today... Any suggestions?
Hi, I'm using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Have cleared space, checked Window - Doctor and server has green light. Mail Activity shows 47 emails waiting to download, iPad and iPhone download them all OK - no extra big files stopping the download either. In the past, quitting mail has worked, but not today... Any suggestions?
-
I have a Fuji X-Pro1 camera. I use Mac OSX Lion 10.7.5 I have Photoshop CS5. How do I open its RAW files?
Since photoshop cs5 can't use past the camera raw 6.7 plugin and that camera requires at least the camera raw 7.1 plugin, you could use the 8.7.1 dng converter
to convert the files to dng copies, which then photoshop cs5 should be able to open.
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
how to use the dng converter
Camera Raw: How to use Adobe DNG Converter - YouTube -
The application can't be updated due to the presence of Mac Osx 10.7.5. I updated the software of my mac to the latest update and still the application can't be updated. I'm using Mac osx lion (10.7.4)!?
Regards,
MharekyOS X Lion Update 10.7.5 (Client Combo).
-
I am using MAC OSX 10.9.4 and LR5 Ver 5.6. I can't drag LR to my second screen. It's always worked before. All of my other apps drag to the second screen with no issues. I've re-booted my computer and it did't help. Any ideas???
Make sure you are not in one of the full screen modes.
Window > Screen Mode > Normal
Can you see the "Traffic Lights" at the top left of the Lightroom window? -
is it free to upgrade to iPhoto 11, if it automatically appears on my updates, and if I'm using Mac OSX version 10.7.5, pre installed iphoto when i got my Mac.
Yes. Don't worry, Apple won't let you download something that requires a purchase before actually paying.
-
Using Mac OSX 10.7.1: recently replaced our DSL modum and wireless router, suddenly I can't get some web sites to load. Many do, but Twitter and others often do not. I've reset the browsing history, forms, cookies and cache but it continues to happen.
Ok, first thing, why are you doing anything with WAMP or XAMPP when you're running a Mac? MAMP should be what you want unless you're not explaining part of what you are trying to do.
2nd thing, I haven't used MAMP in a while, but there are two possibilities for not seeing what you want to see once you have MAMP turned on. One possibility is that you already have "Web Sharing" turned on in your Sharing Preference Pane. If that is the case, port 80 will already be taken and you'll be seeing the default Apache install (files are stored at /Library/WebServer/Documents/). This would push MAMP to either not turn on it's web serving capabilities, or to push it to another port. The other possibility is that MAMP defaults to another port anyway. So instead of localhost, you might have to type in localhost:8080 or something similar. I believe the control panel that gets installed can take you to the currently MAMP-served page, and it can also help you change which port your serving on.
80 is the default port for web serving and the ONLY port that will let you get straight to the server without having to type in webaddress.com:port# instead of just webaddress.com.
Maybe you are looking for
-
Errors while stopping Application 11.5.9
Dear Experts, I am facing errors while trying to stop Application services. I am using : adstpall.sh apps/pwd to stop the services and here is the log for the same. Kindly help ASAP as I need to take cold backup this weekend. Thanks in advance. Oracl
-
Hello All, In MRP List a schedule line is created with exception message 30. what does it mean? (MRP type is P1 for the material). There are requirements (for ex in 03.04.2008), but it is planned only on 05.05.2008 with rescheduling date 31.03.20008
-
Diagnostic-code: smtp;550 message was blocked by server (GWAVA blocked
I am having problems sending emails diagnostic-code: smtp;550 Message was blocked by server (GWAVA blocked: ipreputation, reference ID: , The message is as follows: Reporting-MTA: dns;BLU004-OMC4S31.hotmail.com Received-From-MTA: dns;BLU436-SMTP7 Arr
-
Merging Multiple Creative Cloud Accounts
If I purchase multiple creative cloud accounts using multiple IDs, will I be able to merge them or transfer them to a Team account or volume licensing account? Really excited about CS6, dont want to wait till the Fall...
-
Where can I download older versions of PSE?
You can download PSE 7, 8 (windows only), 9, 10, and 11 here: https://helpx.adobe.com/download-install.html You will need your serial number to license the download. If you registered PSE with Adobe, you can go to http://adobe.com and look for My Ado