Networkmanager 3G connection failed due to lack of /var/locs directory

By far the packages that give me the most pain on upgrades is network-manager / modem-manager combo. This last time i was having it fail like this:
Jul 8 01:44:22 renata NetworkManager[1053]: <info> Activation (ttyACM0) Stage 3 of 5 (IP Configure Start) started...
Jul 8 01:44:22 renata NetworkManager[1053]: <info> (ttyACM0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jul 8 01:44:22 renata NetworkManager[1053]: <info> starting PPP connection
Jul 8 01:44:22 renata NetworkManager[1053]: <info> pppd started with pid 1328
Jul 8 01:44:22 renata NetworkManager[1053]: <info> Activation (ttyACM0) Stage 3 of 5 (IP Configure Start) complete.
Jul 8 01:44:22 renata pppd[1328]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
Jul 8 01:44:23 renata kernel: [ 154.870138] PPP generic driver version 2.4.2
Jul 8 01:44:23 renata kernel: [ 155.078468] NET: Registered protocol family 10
Jul 8 01:44:23 renata kernel: [ 155.085942] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jul 8 01:44:23 renata kernel: [ 155.088396] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jul 8 01:44:23 renata pppd[1328]: pppd 2.4.5 started by root, uid 0
Jul 8 01:44:23 renata pppd[1328]: Exit.
Jul 8 01:44:23 renata NetworkManager[1053]: <info> (ttyACM0): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5]
Jul 8 01:44:23 renata NetworkManager[1053]: <warn> Activation (ttyACM0) failed.
Jul 8 01:44:23 renata NetworkManager[1053]: <info> (ttyACM0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jul 8 01:44:23 renata NetworkManager[1053]: <info> (ttyACM0): deactivating device (reason: 0).
After a lot of head-scratching and a lot of searching this bbs for the failed (reason 'ip-config-unavailable') snippet that seemed to me to be the culprit, i ended up finding another log file telling me that:
Jul 8 01:44:22 renata pppd[1328]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
Jul 8 01:44:23 renata pppd[1328]: pppd 2.4.5 started by root, uid 0
Jul 8 01:44:23 renata pppd[1328]: Can't create lock file /var/lock/LCK..ttyACM0: No such file or directory
Jul 8 01:44:23 renata pppd[1328]: Exit.
Checked if i had a /var/lock dir, no. Created said dir, with write permission for users group, am writing this through the connection that just started working. I have absolutely no idea whether this is a liability, to have this dir with that write permission, of if i should do something different. Also, i have no idea why i didn't have such a normal-sounding dir... Anyway, i'm posting it just in case anyone bumps into the same criptic ip-config-unavailable message...
marcio

Hi Nat,
Thanks a lot for your response.
I am running this ETL task from DAC. This task is a part of Daily Full load ETL. As i mentioned earlier, this task fails sporadically and failing till now. After restarting the ETL, it gets completed.
Please let me know if you have any question.
Thanks,
Neeraj

Similar Messages

Import of a request failing : ERROR: connect failed due to DbSL load lib fa

Hi,
I am using ecc6, on hp-unix and oracle as database.
When i try to import a request from stms, i get this error.
DURING IMPORT ERROR:
    Transport control program tp ended with error code 0249
    Errors: connect failed due to DbSL load lib failure
TP ERROR:
Transport control program tp ended with error code 0249
    Message no. XT200
Diagnosis
    An error occurred when executing a tp command.
      Command:        IMPORT E07K901512 DEV client100 U01 pf=/usr/sap/tr
      Return code:    0249
      Error text:     connect failed due to DbSL load lib failure
      Request:        E08K901525
System Response
    The function terminates.
Procedure
    Correct the error and execute the command again if necessary.
THEN I TRIED TO IMPORT USING TP COMMAND:
WITH OUT DIR_LIBRARY
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "environment variable DIR_LIBRARY is not set."
./R3trans finished (0012).
% # export DIR_LIBRARY=/usr/sap/DEV/SYS/exe/run
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE                           --- ORACLE_SID =
'DEV'"
./R3trans finished (0012).
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
COULD SOMEONE GIVE ME A SOLUTION TO OVERCOME THIS.
YOUR SOLUTION AND GREATELY APPRITIATED.
REGARDS,
DHANANJAY

Hi Dhanajay,
Firstly check if R3trans -d is working fine.
If so, please chek if the following parameters are set properly.
DIR_LIBRARY=/usr/sap/<SID>/SYS/exe/run
TRANSDIR = ....\trans
<SID>/DBHOST = <HOSTNAME>
<SID>/DBNAME = <SID>
<SID>/DBTYPE = ora
Execute the below command and check the transport profile:
tp check all pf=/usr/sap/trans/bin/TP_DOMAIN_<SID>.PFL
Please confirm the permission of the /oracle/ directory
The permission of the /oracle should be 755.
Also check if the import queue is not locked.
Also please ensure the Kernel is of latest version, if not, please update the DBSL shared library.Please look at the note 19466.
Finally you can try once distributing and activating the transport routes once.
When you executed command R3trans -d logfile trans.log will be created.
Please check this file for exact error information.
Paste the log file here.
Let us know the outcome.
Regards,
Sujit.

Connect failed due to dbsl

Hi gurus,
We are upgrading the test server.we face a problem.the error message is "connect failed due to dbsl load lib failure".
"cannot find the dll dboraslib.dll in path"
But dboraslib.dll in the Dir_executable path.
Please provide the solution.
regards
gunamoorthy d

you must check the system path or user path, not dir_executable.
try this:
start -> Run
CMD
set
you will see a list of parameters, check the values for PATH. you must have an entry equivalent to your dir_executable. if not, do this:
right click on MY COMPUTER
choose PROPERTIES
click on ADVANCED tab
click on button ENVIRONMENT VARIABLE
change PATH to add the needed path.
once this is completed, you will need to restart SAP services and close down all command prompts... then try again.

TP error: connect failed due to DbSL load lib failure

Hi All,
I have prepared Quality system from Production system as System copy.I have upgarded Kernel from 620 to 640 in Quality system.
After Kernel upgrade , Server details are as below
Operating System : windows 2003 IA 64
Database : SQL server 2000 IA 64
Kernel :640 and compiled for 64 bit non unicode system ,
patch number is 43.
SAP : SAP R/3 4.7
Before kernel upgrade , server details are as below
Operating System : windows 2000 server
Database : SQL server 2000
Kernel :620 and compiled for Non unicode system ,patch number
is 1363
SAP : SAP R/3 4.7
I am able to transport request from Development to Quality . But when I try to import request from Quality I am getting error message "Connect failed due to DBSL Load lib failure"
Error message is " connect failed due to DBSL load lib failure
cannot find the DLL dbmssslib.dll in path( K:\usr\sap\NBQ\SYS\exe\run)
problem when loading DB-dependent DLLs."
I have set Environmnet variable ( DBMS_TYPE value as mss) for nbqadm user.
I have seen that dbmssslib.dll file is exist in exe/run path.
Does anyone having an Idea , how to resolve this issue.Pls help me
Thanks in advance
Regards
Venu

Hi ,
Thanks for all
Issue is resolved by myself.
Instead of update Kernel to 640 , I have downloaded latest 620 kernel patch on IA 64 .
Since my production server is running on x86 and 620 kernel , i have downloaded 620 kernel for IA 64 .
That resolved my issue.
Regards
Sai

Erro: connect failed due to DbSL load lib failure

Error when trying to transport request
Error Attach.
My database is SQL 2008
Version of the kernel source: 201
Version of the kernel target: 225
Can you help me?
Tks,
Renato

Hi,
I include the environment variables that were gone and rebooted the server, the error changed:
Erro: connect failed
Error code 0232
Tks,
Renato

Target fieldpoint connection failed due to version conflicts

I have set up a small network of fieldpoint (fp-2015) and laptop with Ethernet. Then, I have succesfully configured this fp with MAX and downloaded the iak file to it. Now, I want to target the labview RT of this fp. However, the the connection failed with following message "Version Conflicts between host labview and RT Engine". I'm using Labview 7.1 released in August.

It sounds like the FP-2015 that you have has an older version of software on it (probably LabVIEW 7.0). To upgrade the software on the FP-2015, first launch Measurement & Automation Explorer. Locate the FP-2015 under Remote Systems. Right click on the software item and select Install Software. This will allow you to install the new software image and upgrade the controller to LabVIEW 7.1. Note: You will need FieldPoint Explorer 4.1 which shipped with LabVIEW 7.1. If you have an older version of FieldPoint Explorer, it will not have the 7.1 image for the FieldPoint controller.
Regards,
Aaron

ITunes fails due to lack of Quicktime

A few weeks ago, I had been using iTunes 6 just fine, until I decided to download my first song in a while, and it prompted me to update to iTunes 7. No big deal, I thought. They design these things to be user-friendly. I'll have my song in a few hours.
I downloaded iTunes 7 and Quicktime, installed them as directed, but when I attempted to open iTunes, I got the infamous "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience" error message, which asks if I want to report the problem to Windows. Saying no, I tried to open iTunes again, to the same effect. I realized the problem was with Quicktime when a couple other programs I have that rely on it wouldn't open, with the same problem.
I've gone through Apple's support pages, and uninstalled iTunes. But when I go to uninstall Quicktime, it cannot complete the uninstallation due to a "fatal error." I also cannot reinstall, because apparently I have a "newer version" already installed. I've tried downloading the standalone version of Quicktime, but that got a similar "newer version" message.
(I cannot even do a system restore, because apparently while manually deleting files (as Apple instructs in its "uninstall iTunes" help bit), I've deleted something that cannot be restored with System Restore.)
How can I get Quicktime functional again?
Dell Inspiron 1100 Windows XP
Dell Inspiron 1100 Windows XP

I kept a handy little log of what I was doing as I followed your instructions:
I've downloaded the Windows Installer Cleanup Utility, found that there was a Quicktime listing, and removed it.
There are no iTunes listings in my add/remove programs list.
When I now try to uninstall Quicktime, I get the message, "Quicktime Streaming Authoring failed to load because the versions of Quicktime Streaming and Quicktime Streaming Authoring do not match," and then "Quicktime Streaming Extras failed to load because the versions of Quicktime Streaming and Quicktime Streaming Extras do not match."
Then the "Installer VISE uninstall application has encountered a problem and needs to close. We are sorry for the inconvenience." (The error report indicates a "ModName" of "quicktime.qts")
I freshly downloaded standalone QT and iTunes 7.0.2
I restarted my computer (trying to follow directions on the "Removing iTunes and QuickTime for Windows" page. (it's worth noting that the little QT shortcut icon has been replaced with a Windows default)
I deleted all the iTunes, iPod, and QT files and folders it wanted deleted.
While emptying the recycle bin I got "Cannot delete Dc25 file" (or something like that) "because it is being used by another program. Please close the program and try again." I closed all programs except for the explorer window showing the recycle bin, but I kept getting the same message, so I skipped the "empty recycle bin" step. ;(
I restarted my computer once more (as per instructions)
QT standalone has been successfully installed (w00t)
I restarted my computer.
iTunes successfully installed. (*major celebration*)
And ... cringes iTunes opened successfully and is currently compiling my Library!! THANK YOU!!
I seriously owe you my life or something. If this wasn't the internet, I would bake you cookies or some such similar pastry. THANK YOU SO MUCH! kowtows

CSCul50066 - Upgrade fails due to lack of disk space in the /common partition

I noticed this has only 1 and 2 star ratings after bumping into this issue myself, so I figured I would help out the original poster and others who are experiencing this issue.
Presumably, the original poster is intending to advise that we read the CUCM 10.0(1) Upgrade Guide, and view the Pre-Upgrade Tasks therein. These (the bullet points below) seem to be the salient options contained in that section. I used the "Free Common Space COP file" option to resolve my disk space issue and allow my upgrade. I found the .cop file in the following download area on CCO:
Downloads Home
Products
Unified Communications
Call Control
Unified Communications Manager (CallManager)
Unified Communications Manager Version 10.0
Unified Communications Manager / CallManager / Cisco Unity Connection Utilities-COP-Files
It is called: "VMware Disk Size Reallocation COP file: This COP file allows UCM VMs to increase the size of their vDisk(s) without requiring a system rebuild.
ciscocm.free_common_space_v1.1.cop.sgn "
• Use the Cisco Log Partition Monitoring Tool to adjust the low and high watermarks to reduce the traces
and remove unnecessary log files. Cisco recommends that you adjust the low watermark value to 30,
and the high watermark value to 40. After the upgrade, you must restore the high and low watermarks
to their original values in order to avoid premature purging of traces. The default value for the high
watermark is 85. The default value for the low watermark is 80. For more information about using the
Cisco Log Partition Monitoring Tool, see the Cisco Unified Real-Time Monitoring Tool Administration
Guide.
• Use the Disk Expansion COP file (ciscocm.vmware-disk-size-reallocation-<latest_version>.cop.sgn) to
expand the vDisk size if your virtual environment has additional available disk space. Ensure that you
review the Readme file that supports this COP file before you proceed.
• Use the Free Common Space COP file (ciscocm.free_common_space_v<latest_version>.cop.sgn). This
COP file removes the inactive side in the common partition to increase available disk space without
requiring a system rebuild. Ensure that you review the Readme file that supports this COP file before
you proceed.
• Manually remove outdated or unused firmware files from the TFTP directory. You can remove these
files using the TFTP File Management page in the OS Administration interface, or you can use the file
list tftp and file delete tftp commands from the command line interface.

I noticed this has only 1 and 2 star ratings after bumping into this issue myself, so I figured I would help out the original poster and others who are experiencing this issue.
Presumably, the original poster is intending to advise that we read the CUCM 10.0(1) Upgrade Guide, and view the Pre-Upgrade Tasks therein. These (the bullet points below) seem to be the salient options contained in that section. I used the "Free Common Space COP file" option to resolve my disk space issue and allow my upgrade. I found the .cop file in the following download area on CCO:
Downloads Home
Products
Unified Communications
Call Control
Unified Communications Manager (CallManager)
Unified Communications Manager Version 10.0
Unified Communications Manager / CallManager / Cisco Unity Connection Utilities-COP-Files
It is called: "VMware Disk Size Reallocation COP file: This COP file allows UCM VMs to increase the size of their vDisk(s) without requiring a system rebuild.
ciscocm.free_common_space_v1.1.cop.sgn "
• Use the Cisco Log Partition Monitoring Tool to adjust the low and high watermarks to reduce the traces
and remove unnecessary log files. Cisco recommends that you adjust the low watermark value to 30,
and the high watermark value to 40. After the upgrade, you must restore the high and low watermarks
to their original values in order to avoid premature purging of traces. The default value for the high
watermark is 85. The default value for the low watermark is 80. For more information about using the
Cisco Log Partition Monitoring Tool, see the Cisco Unified Real-Time Monitoring Tool Administration
Guide.
• Use the Disk Expansion COP file (ciscocm.vmware-disk-size-reallocation-<latest_version>.cop.sgn) to
expand the vDisk size if your virtual environment has additional available disk space. Ensure that you
review the Readme file that supports this COP file before you proceed.
• Use the Free Common Space COP file (ciscocm.free_common_space_v<latest_version>.cop.sgn). This
COP file removes the inactive side in the common partition to increase available disk space without
requiring a system rebuild. Ensure that you review the Readme file that supports this COP file before
you proceed.
• Manually remove outdated or unused firmware files from the TFTP directory. You can remove these
files using the TFTP File Management page in the OS Administration interface, or you can use the file
list tftp and file delete tftp commands from the command line interface.

T440s windows 10 upgrade failed due to lack of Lenovo driver for ac-7260

Anyone know when or where Lenovo will release / has released a windows 10 compatible driver for the Intel Wireless ac-7260 wifi adapter (mine is in my T440S)? Currently it's not possible to upgrade because the wifi adapter fails to operate correctly and I can find no update from Lenovo for my notebook and the ac-7260 adapter on the site that supports windows 10. I also tried the Intel "generic" drivers but that failed to resolve the problem. I tried many things and just could not get it to work for many different reasons that all boiled down to the adapter driver failing to work and giving errors or simply not working at all. Now that Windows 10 is released surely Lenovo has an adapter driver somewhere for it?

RESOLVED: Turns out I had an "Array networks" SSL VPN client installed as part of my Softlayer ISP's remote desktop package, not Cisco at all but caused the same exact problem. I had to uninstall it completely and have since found out it doesn't work at all with Windows 10 and there is no timeframe to have it updated and Array networks or maybe just Softlayer apparently haven't gone out of their way to inform the public. Thank you guys for your help and I hope others in future will benefit from this post.

Back Up Failed Due to lack of space on Time Capsule

I purchased a new mac...was able to recover the data off my time capsule just fine...then returned the mac after getting my old mac back from repair....and I haven't been able to back up to my time capsule since...I keep recieving the following error...
This backup is too large for the backup disk. The backup requires 224.69 GB but only 178.45 GB are available.
Time Machine needs work space on the backup disk, in addition to the space required to store backups. Open Time Machine preferences to select a larger backup disk or make the backup smaller by excluding files.
I have no problems removing data from my time capsule to make room for a back up, but I don't know how...I just don't understand why it's not removing the old backups automatically to create the new back as it did in the past before I switch b/w the new mac back to my old mac...
Please advise...Thank you

Download http://support.apple.com/kb/DL148
Earse the time capsule then do a back up..

Backup failed due to lack of space

Hi Folks - hoping this is an easy question, i have been a happy Time Capsule users for well over a year now - never really had to touch it - today its run out of space - I just now have to many files, movies, photo's etc - the TC is 500GB - can I simply add a 1GB external USB drive and use that as my TC backup drive in place of the 500GB internal?

mynameisearl wrote:
can I simply add a 1GB external USB drive and use that as my TC backup drive in place of the 500GB internal?
yes.
JGG

TM fails due to problem with Back Up directory

I have a story similar to several I have seen here. I have been using TM without difficulty for months. My external TM drive is a LaCie 1Tb drive. Recently, I started getting the error saying TM was "unable to complete backup. An error occurred while creating the backup directory.'
Going into the log, the full error is as follows:
Starting standard backup
Backing up to: /Volumes/LaCie 1 TB/Backups.backupdb
Error: (-50) Creating directory 2009-04-26-184805.inProgress
Failed to make snapshot container.
Backup failed with error: 2
I tried to run Disk Utility to check the drive, but as others have posted, I could not "unmount" the drive even after turning TM off. So I finally just turned it off and restarted it, which allowed DU to do its thing. It repaired a few items. I re-ran DU, and the disk was verified. However, attempting to run TM was met with the same errors.
Any ideas? The drive is otherwise acting normally. I have a few files backed up separately on the drive (eg, not by TM), and those applications can be opened/run fine. The drive isn't making any funny sounds or anything suggesting a bad power supply.
Thank you.

David Jones7 wrote:
Error: (-50) Creating directory 2009-04-26-184805.inProgress
Failed to make snapshot container.
Backup failed with error: 2
Sorry to say this, but if TM can't put a folder on the drive, it usually indicates a failing disk drive.
I tried to run Disk Utility to check the drive, but as others have posted, I could not "unmount" the drive even after turning TM off. So I finally just turned it off and restarted it, which allowed DU to do its thing. It repaired a few items. I re-ran DU, and the disk was verified. However, attempting to run TM was met with the same errors.
Obviously this doesn't necessarily mean the disk is ok. +Repair Disk+ repairs the +file system+ on the disk: it doesn't check parts of the disk where there is no data.
Any ideas? The drive is otherwise acting normally. I have a few files backed up separately on the drive (eg, not by TM),
Are they in the same partition? If so, that's not a good idea. TM works best with it's own, exclusive partition. If you're getting a new disk, partition it first. Instructions are in item 5 of the +Frequently Asked Questions+ post at the top of this forum.
You might try using Disk Utility to +Erase Free Space+ on the drive. If it fails, you have a new paperweight. If it succeeds, it doesn't necessarily mean it's ok, though.

CoPilot will not upgrade due to lack of space on iPhone

This issue is occuring on both a 3G and 3Gs phone that we own. I have read on forums outside of here that others are having the same issue. When I origally tried to install CoPilot it told me there was not enough free space to install the 1.3g app. My phone had 5gig free at that time. I uninstalled some videos to free up more space and got it to 11gig free. Still got the same message of not having enough free space. I unplugged the iphone, shut down iTunes and rebooted pc. CoPilot app then installed. After CoPilot installed I resynced movies and all was fine. Same exact thing happened on both phones. Then 2 days later CoPilot came out with an update. I ran into the same issue for the update. My 3g had 9 gig free and iTunes still said it could not install CoPilot for lack of free space. I have looked at the other forums and they say to look at the "other" section of storage on the iPhones, but both of these phones show little memory usage there. My theory is that in the code of CoPilot someone put in an extra digit in the memory requirements and instead of looking for 1.3 gig of free memory it is looking for 13gig of free memory. It is a real big hassle to delete things off of iPhone just to get an app to install.

I have this exact problem, but with slightly different figures. When I originally tried to install CoPilot (which is about 1.5 Gb) there was about 4 Gb free, but the install continually failed due to lack of space on the iPhone (16 Mb 3G). I had to remove a load of music to get enough space to install.
Now there's a CoPilot update and with even 3.5Gb available on the phone, I just get that same error and it won't install. I then deleted CoPilot so there was almost 5 Gb free and tried again and I think it is now OK (currently sync'ing, but very slow).
I don't think this is a CoPilot issue as many users seem to be experiencing similar problems with other apps. I think perhaps it's more likely with CoPilot because it is relatively large. But the fact remains that the iPhone seem to need more than 3 times the size of the app in order to even update it which is truly a PIA and takes a lot of messing about to get around the problem.
Anyone know of a fix to this? I guess it's really a bug and needs to be reported to iPhone feedback).

Itunes cannot sync due to lack of space on iphone, but itunes also indicates 8GB free?

So im trying to sync my phone to itunes, and it clearly says there's 7-8 gb free in the space bar on the itunes iphone window. However whenever i try and sync it tells me I need 500 mb of additional space.
Anyone come across this problem before?

I have this exact problem, but with slightly different figures. When I originally tried to install CoPilot (which is about 1.5 Gb) there was about 4 Gb free, but the install continually failed due to lack of space on the iPhone (16 Mb 3G). I had to remove a load of music to get enough space to install.
Now there's a CoPilot update and with even 3.5Gb available on the phone, I just get that same error and it won't install. I then deleted CoPilot so there was almost 5 Gb free and tried again and I think it is now OK (currently sync'ing, but very slow).
I don't think this is a CoPilot issue as many users seem to be experiencing similar problems with other apps. I think perhaps it's more likely with CoPilot because it is relatively large. But the fact remains that the iPhone seem to need more than 3 times the size of the app in order to even update it which is truly a PIA and takes a lot of messing about to get around the problem.
Anyone know of a fix to this? I guess it's really a bug and needs to be reported to iPhone feedback).

Error in ods activation due to lack of roles

Hi Experts,
When i am trying to actvate ods its failed due to lack of roles in my server so which role i need to create for this?
David

activate ods may cause to create new master data , so I think you may need to check sm37 and st22 to check which infoObject cause this error.
RL

Networkmanager 3G connection failed due to lack of /var/locs directory

Similar Messages

Maybe you are looking for