NetworkManager daemon not starting since systemd 208-2 upgrade

Hi, Since i updated my system to systemd 208-2 NetworkManager fails to start at boot.
I haver this behaviour both with the LTS kernel and the 3.7.9.2 kernel.
I use only a wifi card, Atheros Ar9271. However even when the card is not connected Network Manager fails to start.
I have downgraded to 208-1 as a workaround for the moment.
has anyone similar behaviour?
Should i repor a bug ??
Here are some logs :
systemctl status Network.Manager.service :
NetworkManager.service - Network Manager
Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled)
Active: failed (Result: exit-code) since lun 2013-10-28 01:02:34 CST; 1min 0s ago
Process: 291 ExecStart=/usr/bin/NetworkManager --no-daemon (code=exited, status=127)
Main PID: 291 (code=exited, status=127)
CGroup: /system.slice/NetworkManager.service
journalctl:
oct 28 01:02:46 archlinux systemd[333]: Failed to open private bus conne...y
oct 28 01:02:46 archlinux systemd[333]: Mounted /sys/kernel/config.
oct 28 01:02:46 archlinux systemd[333]: Stopped target Sound Card.
oct 28 01:02:46 archlinux systemd[333]: Starting Default.
oct 28 01:02:46 archlinux systemd[333]: Reached target Default.
oct 28 01:02:46 archlinux systemd[333]: Startup finished in 222ms.
Edit: added logs
Last edited by hydrosIII (2013-10-28 07:09:03)

Hmm, I still seem to have this issue. For me, it's random. Most of the time I start my computer and I have no internet. At boot it tries to start internet on eth0 all the time.
Every boot I run "ifconfig" to see if I got internet or not. Most often I do not have any, and running "dhcpcd eth0" will not do anything, at this time I am required to run "dhcpcd eth1".
Rarely, I boot my computer, run "ifconfig", and see that I got a local IP address. But that happens rarely. I am using 208-3.

Similar Messages

My macbook will not start since I asked to upgrade??

yesterday, updated my macbook through software updates, ending today would restart and still can not start, stays at the gray screen with apple logo and spinning circle

* [/questions/777886]
Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false

Grid on a standalone server Cluster daemons not starting during server boot

Hi!I have installed Oracle Grid on a standalone server and setup Oracle db 11.2.0.2 on Oracle Linux 6.2 64 bit server.When I reoot the server and run crs_stat -t,several daemons havent started thus the ASM and db instances are also down as below
Name Type Target State Host
ora.DATA.dg ora....up.type OFFLINE OFFLINE
ora.FRADG.dg ora....up.type OFFLINE OFFLINE
ora....ER.lsnr ora....er.type ONLINE ONLINE amldb01dc
ora.amldb.db ora....se.type OFFLINE OFFLINE
ora.asm ora.asm.type OFFLINE OFFLINE
ora.cssd ora.cssd.type ONLINE OFFLINE
ora.diskmon ora....on.type ONLINE OFFLINE
ora.evmd ora.evm.type ONLINE ONLINE amldb01dc
ora.ons ora.ons.type OFFLINE OFFLINE
I am forced to manually start the daemons via command crsctl start resource -all then I manually start the ASM and db instances.
Yet when I run the commands
crsctl config has
CRS-4622: Oracle High Availability Services autostart is enabled.
crsctl check has
CRS-4638: Oracle High Availability Services is online.
Thus I would assume the daemons would start automatically during boot.
How can I resolve this?

crstcl check crs seems not to be applicable to single instance but for RAC,since I have a single instance db,the output of the command is as below
crsctl check crs
Parse error:
'crs' is an invalid argument
Brief usage:
crsctl check has
Check status of OHAS.
There is no crsd.log in path /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/crsd.The output of crs_stat -t is already posted in initial post and output of entire alert log is as below
2012-07-03 16:18:35.975
[client(8182)]CRS-2101:The OLR was formatted using version 3.
2012-07-03 16:18:36.471
[client(8218)]CRS-1001:The OCR was formatted using version 3.
[client(8293)]CRS-10001:CRS-6021: No msg for has:crs-6021 [l][unlimited]
[client(8294)]CRS-10001:CRS-6021: No msg for has:crs-6021 [n][65536]
2012-07-03 16:18:42.528
[ohasd(8291)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-03 16:18:42.538
[ohasd(8291)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-03 16:18:51.271
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(8465)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:18:52.299
[evmd(8479)]CRS-1401:EVMD started on node amldb01dc.
[client(8520)]CRS-10001:03-Jul-12 16:18 ACFS-9459: ADVM/ACFS is not supported on this OS version: 'error: file /etc/SuSE-release: No such file or directory
[client(8889)]CRS-10001:03-Jul-12 16:19 ACFS-9459: ADVM/ACFS is not supported on this OS version: 'error: file /etc/SuSE-release: No such file or directory
2012-07-03 16:19:22.600
[cssd(9014)]CRS-1713:CSSD daemon is started in local-only mode
2012-07-03 16:19:31.128
[cssd(9014)]CRS-1601:CSSD Reconfiguration complete. Active nodes are amldb01dc .
[client(10038)]CRS-10001:03-Jul-12 16:25 ACFS-9459: ADVM/ACFS is not supported on this OS version: 'error: file /etc/SuSE-release: No such file or directory
2012-07-03 16:34:13.791
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(8465)]CRS-5010:Update of configuration file "/u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/oratab.bak.amldb01dc" failed: details at "(:CLSN00011:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-03 16:37:39.674
[ohasd(8291)]CRS-2765:Resource 'ora.DATA.dg' has failed on server 'amldb01dc'.
2012-07-03 16:37:43.636
[ohasd(8291)]CRS-2767:Resource state recovery not attempted for 'ora.asm' as its target state is OFFLINE
2012-07-03 16:38:06.905
[cssd(9014)]CRS-1603:CSSD on node amldb01dc shutdown by user.
2012-07-03 16:38:07.006
[cssd(9014)]CRS-1660:The CSS daemon shutdown has completed
2012-07-03 16:38:10.118
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(8465)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-03 16:42:09.578
[ohasd(4827)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-03 16:42:09.649
[ohasd(4827)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-03 16:42:10.437
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:2:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:10.667
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-03 16:42:40.463
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:40.464
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:54.641
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5046)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:55.675
[evmd(5060)]CRS-1401:EVMD started on node amldb01dc.
2012-07-03 16:54:35.840
[cssd(5256)]CRS-1713:CSSD daemon is started in local-only mode
2012-07-03 16:54:44.396
[cssd(5256)]CRS-1601:CSSD Reconfiguration complete. Active nodes are amldb01dc .
2012-07-03 16:54:56.832
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5046)]CRS-5010:Update of configuration file "/u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/oratab.bak.amldb01dc" failed: details at "(:CLSN00011:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:03:53.530
[ohasd(4827)]CRS-2767:Resource state recovery not attempted for 'ora.asm' as its target state is OFFLINE
2012-07-04 10:04:02.701
[cssd(5256)]CRS-1603:CSSD on node amldb01dc shutdown by user.
2012-07-04 10:04:02.809
[cssd(5256)]CRS-1660:The CSS daemon shutdown has completed
2012-07-04 10:04:03.008
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5046)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:07:48.492
[ohasd(4698)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-04 10:07:48.534
[ohasd(4698)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-04 10:07:49.059
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:07:49.192
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:08:19.085
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:08:19.093
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:08:33.278
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5053)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:08:34.319
[evmd(5069)]CRS-1401:EVMD started on node amldb01dc.
2012-07-04 10:27:13.716
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5053)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:30:57.260
[ohasd(4619)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-04 10:30:57.280
[ohasd(4619)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-04 10:30:57.660
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:30:57.784
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:31:27.685
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:31:27.685
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:31:41.868
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5168)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:31:42.916
[evmd(5184)]CRS-1401:EVMD started on node amldb01dc.
2012-07-04 10:39:17.166
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5168)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:43:01.219
[ohasd(4575)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-04 10:43:01.240
[ohasd(4575)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-04 10:43:01.643
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:01.781
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:43:31.680
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:31.680
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:45.864
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5120)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:46.915
[evmd(5136)]CRS-1401:EVMD started on node amldb01dc.

[SOLVED] (gnome) NetworkManager does not start on login

Hello!
Like the title says, the NetworkManager utility does not start with gnome on login. Every time I log in I have to start it manually by going into the terminal and running su, then running NetworkManager. I have googled and searched in the wiki, but did not find a good answer. Some threads talk about doing something with the gnome-session but it did not work for me.
So, which conf file do I need to edit to have it start on startup?
I hope I provided enough information.
Thanks in advance for the answers.
Last edited by Persuadatron (2011-02-26 16:03:54)

oTarUX wrote:
Persuadatron wrote:
Yes, and yes. The network-manager-applet is installed (v 0.8.2-2) and my rc.conf looks like this:
DAEMONS=(syslog-ng dbus network netfs crond gdm)
You have to deactivate network daemon and add network manager instead, somethig like this:
DAEMONS=(syslog-ng dbus !network networkmanager netfs crond gdm)
Read the wiki as RaisedFist said.
Thanks! This solved it.

Bluetooth daemon not starting

Hi,
Not so much of a problem but, bluetooth daemon does not start on boot up.... sure I have it in daemons [no @!] but when you run hcitool scan you get no device found..
Is there a better place to start /etc/rc.d/bluetooth? ir rc.local maybe ?
thanks
MrG

we havent resolved the issues we have with RDA.
First when we opened a msg with SAP they asked to apply these notes:
1048864 - RDA daemon does not close empty requests
1042790 - P14: Real-time: QM action for real-time PSA request
Which fixed most of issues and but the delta queue wasnt being deleted in source system even after the data is loaded and request closed. Now they asked us to apply other note 1089041 - RDA InfoPackage does not delete delta queue which is supposed to be part of SP16. And guess what we patched our system with SP16 and Now the RDA doesnt work at all :). The RDA is active but the daemon never wakes up - So opened anyother note with SAP. And pretty soon I hope I will be making good friends with the SAP consultant I'm working with all the messages going back and forth.
Let us know if you found a magical way to make ur RDA work. I guess we decided to hold on RDA till starts behaving stable (may be SP53- you never know). And I would personally like to be able to close the request in 30mins and not 1hr default it has. I tried playing around with the FM's - no luck.

[SOLVED] cups not started under systemd

Under systemd cupsd is not started automatically; but manually run
systemctl start cups
start it. In trying to figure out what happens I see that the install section of cups.service contains the following:
WantedBy=printer.target
But nothing seems to depends on printer target. I have just changed that by
WantedBy=multi-user.target
and everything works. Anyway, either there is a bug that I have corrected, either I have missed something. The original printer.target seems to have nothing that depends on it. Could someone tell me what's the proper way to configure printing under systemd.
Last edited by olive (2012-12-14 06:51:27)

Now cups start properly and everything is fine. I do not know if is due to an upgrade or so, but I put solved now. Thanks for the explanation of the printer target.

Daemon not starting

a) Created DTP for RDA..
b) Created infopackage by clicking RDA and assigned ..
c) Created Daemon
d) asssigned Damon to the package and atttached DTP..
e) when said Start all infopackages from the Daemon.... it is not starting and the request is going to Red.
Inititally it was green after some time., it has become red and now it is inactive. Can anyone tell me the reason.. I deleted everything and tried to created once again DTP and infopackage and Daemon.. but no use...
Eagerly waiting for reply

we havent resolved the issues we have with RDA.
First when we opened a msg with SAP they asked to apply these notes:
1048864 - RDA daemon does not close empty requests
1042790 - P14: Real-time: QM action for real-time PSA request
Which fixed most of issues and but the delta queue wasnt being deleted in source system even after the data is loaded and request closed. Now they asked us to apply other note 1089041 - RDA InfoPackage does not delete delta queue which is supposed to be part of SP16. And guess what we patched our system with SP16 and Now the RDA doesnt work at all :). The RDA is active but the daemon never wakes up - So opened anyother note with SAP. And pretty soon I hope I will be making good friends with the SAP consultant I'm working with all the messages going back and forth.
Let us know if you found a magical way to make ur RDA work. I guess we decided to hold on RDA till starts behaving stable (may be SP53- you never know). And I would personally like to be able to close the request in 30mins and not 1hr default it has. I tried playing around with the FM's - no luck.

[Resolved] DAEMONS not starting

No daemons are starting even though my rc.conf is configured correctly. I am also in runlevel 3.
Anybody know what the problem is?
[root@pollux etc]# cat rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# See 'man 5 rc.conf' for more details
# LOCALIZATION
HARDWARECLOCK="UTC"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="yes"
USECOLOR="yes"
# HARDWARE
MODULES=()
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
# NETWORKING
HOSTNAME="pollux"
interface=
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
# DAEMONS
Daemons=(syslog-ng dbus crond alsa !network net-profiles netfs sshd ntpd !hwclock)
[root@pollux etc]# runlevel
N 3
[root@pollux etc]# rc.d list
[STOPPED][ ] adsl
[STOPPED][ ] alsa
[STOPPED][ ] avahi-daemon
[STOPPED][ ] avahi-dnsconfd
[STOPPED][ ] crond
[STOPPED][ ] dbus
[STOPPED][ ] derby-network-server
[STOPPED][ ] fam
[STOPPED][ ] fluidsynth
[STOPPED][ ] ftpd
[STOPPED][ ] git-daemon
[STOPPED][ ] gpm
[STOPPED][ ] heimdal-kdc
[STOPPED][ ] hwclock
[STOPPED][ ] irexecd
[STOPPED][ ] kadmind
[STOPPED][ ] kpasswd
[STOPPED][ ] krb5-kadmind
[STOPPED][ ] krb5-kdc
[STOPPED][ ] krb5-kpropd
[STOPPED][ ] lircd
[STOPPED][ ] lircmd
[STOPPED][ ] mdadm
[STOPPED][ ] net-auto-wired
[STOPPED][ ] net-auto-wireless
[STOPPED][ ] netfs
[STOPPED][ ] net-profiles
[STOPPED][ ] net-rename
[STOPPED][ ] network
[STOPPED][ ] nscd
[STOPPED][ ] ntpd
[STOPPED][ ] ntpdate
[STOPPED][ ] ppp
[STOPPED][ ] redis
[STOPPED][ ] rpcbind
[STOPPED][ ] snmpd
[STOPPED][ ] sshd
[STOPPED][ ] syslog-ng
[STOPPED][ ] tftpd
Last edited by ecallen (2012-07-31 02:03:46)

Please mark your thread a solved and, while you are editing your original post, enclose your code in the correct tags:
https://wiki.archlinux.org/index.php/Fo … s_and_Code

POP3 and IMAP daemons not starting?

Ahoy, my mail server's been running fine for months now, but this morning it wasn't working.
On closer inspection, Server Admin says that POP and IMAP are disabled. In the settings they are definatly enabled.
I tried restarting the server, and I also updated to 10.4.8, but still nothing.
Does anyone know how I can get an error log or something that might tell me why they're not starting?
thanks!

Fixed it.
Apologies for the false alarm. I looked at the logs and config and thought 'This looks messy. I need to look cool in front of these guys, I should clear this up.'
So I restored the default main.cf file and reconfigured my mail server from scratch, and now it's working...
Thanks anyway!

MSExchangeSA and IS is not starting automatic at reboot after upgrading the server from SP1 to SP2

I am running a 2 node DAG with separate Hub & CAS servers
I have already upgraded the Hub CAS server and they are fine
Exchange running on Windows 2008 R2 SP1
All are in VM-Ware ESXi 5.0
After I upgrade the mailbox server to SP2 the SA and IS service not starting automatic after reboot
If I run "net time /set" command and then restart ADtopology server, the IS and SA starts fine
But again after reboot they do not start
Also I get the below event in the app log when the IS & SA fails to start
Log Name: Application
Source: MSExchangeIS
Date: 05/22/2012 5:15:03 AM
Event ID: 5003
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: server.domain.com
Description:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either on the client or on the server, and may require a restart of that computer. Verify that your domain is correctly
configured and is currently online.
If I check the Registry for time resource it is taking from the DC
I manually compared the time between DC and Exchange and it is fine
Since the Exchange mailbox is virtual, I checked the time sync on VM-Ware tools and it is "unchecked"
Checked for group policy and do not find any specific to time sync.
Confirmed that Windows Time service is running
Suspecting a Operating system issue, tried to upgrade the other DAG
Even that node is displaying the same symptom and Issues
Tried to install RU1 on both nodes and that too did not fix the issue.
Checked with VM-Ware engineer and he said that every thing from VM-Ware end is fine
Is Anyone have come across the issue before ?

Exchange 2010: Unable to initialize the Information Store
Problem:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either in the client or the server, and may require a reboot of that computer. Verify that
your domain is properly configured and is currently online.
Solution:
Open a cmd prompt from the Exchange Server as administrator (right mouse click on the command prompt shortcut and select “Run as Administrator”)
Run this command
Net time \\ADServerName /Set
Restart the Microsoft Exchange Active Directory Topology Service
*Important!! You have to restart the Microsoft Exchange Active Directory Topology Service or this fix will not work.. I tried just starting the Information Store service after running the command it it still failed..
This worked for me and all is well on my exchange server.
- See more at: http://www.mountainvistatech.com/2012/06/04/exchange-2010-unable-to-initialize-the-information-store/#sthash.SwQpgQEM.dpuf

Dialogue instance not starting up after performing stack upgrade.

Dear Experts,
We have performed stack upgrade on ERP 6.0 EHP5 system. In configuration phase we have not got the option to update dialog instances.
We proceeded without that option and completed the upgrade successfully but the dialog instance is not getting started.
Kernel level got upgraded in all instance with the same level. Below is the work process log content of dialog instance.
Loading DB library '/usr/sap/MMD/D10/exe/dboraslib.so' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/MMD/D10/exe/dborasli
b.so") FAILED
"I/O error mapping in '/usr/sap/MMD/D10/exe/dboraslib.so'." [dlux.c 445
B *** ERROR => Couldn't load library '/usr/sap/MMD/D10/exe/dboraslib.so'
[dbcon.c 5768]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c 1519]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thx
xhead.c 11532]
As per SUM guide we need to uninstall the dialog instances before downtime and re-install the dialog instances after upgrade but we didn't uninstalled dialog instances before downtime.
Kindly let me know if there is any other process start up the dialog instance with out going for re-installing it.
Also suggest on re-installing the dialog instance since we didn't uninstalled dialog instances before downtime.
Thanks,
Bharath.

Dear Divyanshu,
Please find the work process log of dialog instance.
trc file: "dev_w0", trc level: 1, release: "721"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 04
M sid MMD
M systemid 274 (HP (IA-64) with HP-UX)
M relno 7210
M patchlevel 0
M patchno 300
M intno 20020600
M make single threaded, Unicode, 64 bit, optimized
M profile /sapmnt/MMD/profile/MMD_D10_msdprd
M pid 266
M
M
M Fri Oct 3 02:46:33 2014
M kernel runs with dp version 139000(ext=121000) (@(#) DPLIB-INT-VERSION-139000-UC)
M length of sys_adm_ext is 592 bytes
M ThStart: taskhandler started
M ThTHPInit: thp initialized
M ThInit: initializing DIA work process W0
M ***LOG Q01=> ThInit, WPStart (Workp. 0 1 266) [thxxhead.c 1349]
M ThInit: running on host msdprd
M calling db_connect ...
B Loading DB library '/usr/sap/MMD/D10/exe/dboraslib.so' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/MMD/D10/exe/dboraslib.so") FAILED
"I/O error mapping in '/usr/sap/MMD/D10/exe/dboraslib.so'." [dlux.c 445]
B *** ERROR => Couldn't load library '/usr/sap/MMD/D10/exe/dboraslib.so'
[dbcon.c 5768]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c 1519]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 11532]
M
M Info for wp 0
M
M pid = 266
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = 0
M req.rq_id = 65535
M req.rq_source =
M last_tid = 0
M last_uid = 0
M last_mode = 0
M locked semaphores (), locking ()
M act_cs_count = 1
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len 0 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 867]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 302]
sapcpe.log of dialog instance
2014/10/03 02:45:39
sapcpe version UC: @(#) $Id: //bas/721_REL/src/ccm/sapstart/sapxxcpe.c#21 $ SAP
Command line:
0: /usr/sap/MMD/SYS/exe/run/sapcpe
1: pf=/sapmnt/MMD/profile/MMD_D10_msdprd
Trace level (profile): 1
** INFO: Try to find file table sapcpeft (default:sapcpeft)
** INFO: Try to find file table in the central directory /usr/sap/MMD/SYS/exe/run/sapcpeft
** INFO: Found file table: /usr/sap/MMD/SYS/exe/run/sapcpeft
source: /usr/sap/MMD/SYS/exe/run
target: /usr/sap/MMD/D10/exe
Checking the files in the file table for copy type
** INFO: file /usr/sap/MMD/SYS/exe/run/db4cncl is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/dbdb2slib.so is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/dbdb2slib9.so is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/dbdb2slibx.so is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/dbdb4slib.so is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/dbinfslib.so is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/dbsldb4ccm.so is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/libsecude.so is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/setdb4pwd is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/xdnxdaapi.so is not existing and status -copy when file exists- is set
** INFO: no extern File-List defined. Look for the default File-List(s).
Checking File-List(s).
** INFO: File-List "/usr/sap/MMD/SYS/exe/run/instance.lst" exists.
** INFO: File-List "/usr/sap/MMD/SYS/exe/run/instancedb.lst" exists.
** INFO: File-List "/usr/sap/MMD/SYS/exe/run/tools.lst" does not exist.
** INFO: File-List "/usr/sap/MMD/SYS/exe/run/inhouse.lst" does not exist.
** INFO: File-List "/usr/sap/MMD/SYS/exe/run/dbclient.lst" does not exist.
** INFO: File-List "/usr/sap/MMD/SYS/exe/run/igsexe.lst" exists.
** INFO: File-List "/usr/sap/MMD/SYS/exe/run/sapcrypto.lst" does not exist.
Current list file: see table below
ActualizeLocalFileOrDir: instance.lst (FPM:0x0)
ActualizeLocalFile: instance.lst
ActualizeLocalFileOrDir: sapmanifest.mf (FPM:0x0)
ActualizeLocalFile: sapmanifest.mf
ActualizeLocalFileOrDir: saproot.sh (FPM:0x0)
ActualizeLocalFile: saproot.sh
ActualizeLocalFileOrDir: scsclient.lst (FPM:0x0)
ActualizeLocalFile: scsclient.lst
ActualizeLocalFileOrDir: j2eeinst.lst (FPM:0x0)
ActualizeLocalFile: j2eeinst.lst
ActualizeLocalFileOrDir: sapmanifestj2ee.mf (FPM:0x0)
ActualizeLocalFile: sapmanifestj2ee.mf
ActualizeLocalFileOrDir: scs.lst (FPM:0x0)
ActualizeLocalFile: scs.lst
ActualizeLocalFileOrDir: webdispinst.lst (FPM:0x0)
ActualizeLocalFile: webdispinst.lst
ActualizeLocalFileOrDir: gateway.lst (FPM:0x0)
ActualizeLocalFile: gateway.lst
ActualizeLocalFileOrDir: disp+work (FPM:0x1)
ActualizeLocalFile: disp+work
*** ERROR: CopyFile: write <dst> failed: -1 <> 1048576, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/disp+work -> /usr/sap/MMD/D10/exe/disp+work (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: rsyn.bin (FPM:0x1)
ActualizeLocalFile: rsyn.bin
ActualizeLocalFileOrDir: ABAP.pad (FPM:0x1)
ActualizeLocalFile: ABAP.pad
ActualizeLocalFileOrDir: aci_ABAP.pad (FPM:0x1)
ActualizeLocalFile: aci_ABAP.pad
ActualizeLocalFileOrDir: aci_ABAP.gram (FPM:0x1)
ActualizeLocalFile: aci_ABAP.gram
ActualizeLocalFileOrDir: R3trans (FPM:0x1)
ActualizeLocalFile: R3trans
*** ERROR: CopyFile: write <dst> failed: -1 <> 1030984, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/R3trans -> /usr/sap/MMD/D10/exe/R3trans (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: R3ta (FPM:0x0)
ActualizeLocalFile: R3ta
*** ERROR: CopyFile: write <dst> failed: -1 <> 1048576, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/R3ta -> /usr/sap/MMD/D10/exe/R3ta (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: R3check (FPM:0x0)
ActualizeLocalFile: R3check
*** ERROR: CopyFile: write <dst> failed: -1 <> 704256, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/R3check -> /usr/sap/MMD/D10/exe/R3check (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: tp (FPM:0x0)
ActualizeLocalFile: tp
ActualizeLocalFileOrDir: dipgntab (FPM:0x0)
ActualizeLocalFile: dipgntab
*** ERROR: CopyFile: write <dst> failed: -1 <> 1048576, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/dipgntab -> /usr/sap/MMD/D10/exe/dipgntab (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: saplicense (FPM:0x1)
ActualizeLocalFile: saplicense
*** ERROR: CopyFile: write <dst> failed: -1 <> 1048576, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/saplicense -> /usr/sap/MMD/D10/exe/saplicense (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: saplikey (FPM:0x1)
ActualizeLocalFile: saplikey
*** ERROR: CopyFile: write <dst> failed: -1 <> 620472, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/saplikey -> /usr/sap/MMD/D10/exe/saplikey (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: sapcpeft (FPM:0x0)
ActualizeLocalFile: sapcpeft
ActualizeLocalFileOrDir: startsap (FPM:0x0)
ActualizeLocalFile: startsap
*** ERROR: CopyFile: write <dst> failed: -1 <> 92600, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/startsap -> /usr/sap/MMD/D10/exe/startsap (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: stopsap (FPM:0x0)
ActualizeLocalFile: stopsap
*** ERROR: CopyFile: write <dst> failed: -1 <> 92600, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/stopsap -> /usr/sap/MMD/D10/exe/stopsap (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: jdbcconnect.jar (FPM:0x0)
ActualizeLocalFile: jdbcconnect.jar
ActualizeLocalFileOrDir: SAPCAR (FPM:0x0)
ActualizeLocalFile: SAPCAR
*** ERROR: CopyFile: write <dst> failed: -1 <> 1048576, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/SAPCAR -> /usr/sap/MMD/D10/exe/SAPCAR (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: rslgsend (FPM:0x1)
ActualizeLocalFile: rslgsend
*** ERROR: CopyFile: write <dst> failed: -1 <> 249984, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/rslgsend -> /usr/sap/MMD/D10/exe/rslgsend (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: rslgcoll (FPM:0x1)
ActualizeLocalFile: rslgcoll
*** ERROR: CopyFile: write <dst> failed: -1 <> 324120, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/rslgcoll -> /usr/sap/MMD/D10/exe/rslgcoll (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: gwrd (FPM:0x1)
Kindly suggest.
Thanks,
Bharath.

Hola not working Since 10.10.2 Upgrade?

Hello,
Hola App in Firefox not working since 10.10.2?
Anyone else?
Work arounds?
How to downgrade back to 10.10?
Any help greatly app reciated
Thanks
J.

The only way to 10.10.1 or earlier is if you have a TM backup from that point in time.

Adsl daemon not starting

I have pppoe connection, in the past worked very well, I 've recently replaced an antique motherboard 10 years old with a 775 socket Asrock, chipset G41 that has Realtek 8102E/8103E on-board lan and I have since then always had to manually do sudo /etc/rc.d/adsl start
That's when I have adsl backgrounded in rc.conf. I mention that pppoe is configured correctly like always did for some years now. It's a real pain starting system and when someone in the family wants to surf the web I have to come and put a daemon to work.
Can anybody help me?
Last edited by innn (2011-07-23 19:27:52)

ok, this is from /var/log/daemon.log
Jul 26 18:41:46 localhost [ 1.090100] udevd[48]: starting version 171
Jul 26 18:41:46 localhost [ 3.435828] udevd[235]: starting version 171
Jul 26 18:41:48 localhost pppd[679]: pppd 2.4.5 started by root, uid 0
Jul 26 18:41:48 localhost pppd[679]: Using interface ppp0
Jul 26 18:41:48 localhost pppd[679]: Connect: ppp0 <--> /dev/pts/0
Jul 26 18:41:49 localhost dbus[630]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
Jul 26 18:41:50 localhost dbus[630]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Jul 26 18:41:50 localhost polkitd[798]: started daemon version 0.101 using authority implementation `local' version `0.101'
Jul 26 18:41:50 localhost dbus[630]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Jul 26 18:41:50 localhost dbus[630]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Jul 26 18:42:19 localhost pppd[679]: LCP: timeout sending Config-Requests
Jul 26 18:42:19 localhost pppd[679]: Connection terminated.
Jul 26 18:42:19 localhost pppd[679]: Modem hangup
Jul 26 18:42:21 localhost pppd[1184]: pppd 2.4.5 started by root, uid 0
Jul 26 18:42:21 localhost pppd[1184]: Using interface ppp0
Jul 26 18:42:21 localhost pppd[1184]: Connect: ppp0 <--> /dev/pts/2
Jul 26 18:42:21 localhost pppoe[1187]: PADS: Service-Name: 'ftth'
Jul 26 18:42:21 localhost pppoe[1187]: PPP session is 115 (0x73)
Jul 26 18:42:21 localhost pppd[1184]: PAP authentication succeeded
Jul 26 18:42:21 localhost pppd[1184]: Cannot determine ethernet address for proxy ARP
Jul 26 18:42:21 localhost pppd[1184]: local IP address 79.114.206.165
Jul 26 18:42:21 localhost pppd[1184]: remote IP address 10.0.0.1
Jul 26 18:42:21 localhost pppd[1184]: primary DNS address 213.154.124.1
Jul 26 18:42:21 localhost pppd[1184]: secondary DNS address 193.231.252.1
Jul 26 18:42:23 localhost pppoe[689]: Timeout waiting for PADO packets
Jul 26 18:42:23 localhost pppd[679]: Exit.
messages.log
Jul 26 18:41:47 localhost kernel: [ 10.999453] r8101: eth0: link up
Jul 26 18:41:47 localhost kernel: [ 11.065529] PPP generic driver version 2.4.2
Jul 26 18:41:48 localhost pppd[679]: pppd 2.4.5 started by root, uid 0
Jul 26 18:41:48 localhost pppd[679]: Using interface ppp0
Jul 26 18:41:48 localhost pppd[679]: Connect: ppp0 <--> /dev/pts/0
Jul 26 18:41:49 localhost dbus[630]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
Jul 26 18:41:50 localhost dbus[630]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Jul 26 18:41:50 localhost polkitd[798]: started daemon version 0.101 using authority implementation `local' version `0.101'
Jul 26 18:41:50 localhost dbus[630]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Jul 26 18:41:50 localhost dbus[630]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Jul 26 18:41:58 localhost kernel: [ 21.941423] chromium-sandbo (894): /proc/892/oom_adj is deprecated, please use /proc/892/oom_score_adj instead.
Jul 26 18:42:19 localhost pppd[679]: LCP: timeout sending Config-Requests
Jul 26 18:42:19 localhost pppd[679]: Connection terminated.
Jul 26 18:42:19 localhost pppd[679]: Modem hangup
Jul 26 18:42:21 localhost pppd[1184]: pppd 2.4.5 started by root, uid 0
Jul 26 18:42:21 localhost pppd[1184]: Using interface ppp0
Jul 26 18:42:21 localhost pppd[1184]: Connect: ppp0 <--> /dev/pts/2
Jul 26 18:42:21 localhost pppoe[1187]: PPP session is 115 (0x73)
Jul 26 18:42:21 localhost pppd[1184]: PAP authentication succeeded
Jul 26 18:42:21 localhost kernel: [ 44.479616] PPP BSD Compression module registered
Jul 26 18:42:21 localhost pppd[1184]: local IP address 79.114.206.165
Jul 26 18:42:21 localhost pppd[1184]: remote IP address 10.0.0.1
Jul 26 18:42:21 localhost pppd[1184]: primary DNS address 213.154.124.1
Jul 26 18:42:21 localhost pppd[1184]: secondary DNS address 193.231.252.1
Jul 26 18:42:23 localhost pppd[679]: Exit.
errors.log
Jul 26 18:42:21 localhost pppd[1184]: Cannot determine ethernet address for proxy ARP
Jul 26 18:42:23 localhost pppoe[689]: Timeout waiting for PADO packets
kernel.log
Jul 26 18:41:47 localhost kernel: [ 10.999443] r8101 0000:01:00.0: Not Support EEE
Jul 26 18:41:47 localhost kernel: [ 10.999453] r8101: eth0: link up
Jul 26 18:41:47 localhost kernel: [ 11.065529] PPP generic driver version 2.4.2
Jul 26 18:41:58 localhost kernel: [ 21.941423] chromium-sandbo (894): /proc/892/oom_adj is deprecated, please use /proc/892/oom_score_adj instead.
Jul 26 18:42:21 localhost kernel: [ 44.479616] PPP BSD Compression module registered
basically these 3 or 4 lines I found in dmesg also

[SOLVED] Netcfg.service not starting with systemd

I have net-auto-wireless.service enabled and working, but when I try to start netcfg.service, it gives the error:
Job for netcfg.service failed. See 'systemctl status netcfg.service' and 'journalctl' for details.
"systemctl status netcfg.service" gives me:
netcfg.service - Netcfg multi-profile daemon
Loaded: loaded (/usr/lib/systemd/system/netcfg.service; enabled)
Active: failed (Result: exit-code) since Thu, 04 Oct 2012 13:43:05 -0400; 5min ago
Main PID: 1510 (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/netcfg.service
Oct 04 13:43:05 arch systemd[1]: Starting Netcfg multi-profile daemon...
Oct 04 13:43:05 arch netcfg-daemon[1510]: No recorded netcfg state to restore
Oct 04 13:43:05 arch systemd[1]: Failed to start Netcfg multi-profile daemon.
And the output of "journalctl" is:
Oct 04 13:43:05 arch netcfg-daemon[1510]: No recorded netcfg state to restore
Oct 04 13:43:05 arch systemd[1]: netcfg.service: main process exited, code=...=1
Oct 04 13:43:05 arch systemd[1]: Unit netcfg.service entered failed state.
Am I missing something in setting it up? I followed the netcfg wiki as closely as I could.
Last edited by mellowmaroon (2012-10-04 18:46:16)

Good call, I changed it from "last", to the profile I use in /etc/network.d that net-auto-wireless autoconnects to. It failed for a different reason after changing the NETWORKS in /etc/conf.d/netcfg, because net-auto-wireless was still running.
But it works now, thanks for the help!
I wanted to use netcfg instead of net-auto-wireless because I was unable to find a suitable way to connect to available networks that is non-graphical, and I felt like giving netcfg a try and seeing if it's any easier than running "systemctl restart net-auto-wireless.service" every time I want to reconnect.
Although my question for this thread is solved, is there any way to have netcfg autoconnect to profiles once I am within range?

Launchd daemon not starting correctly on launch

Hi All,
I have a script that I like to have run anytime my wireless network changes. The script needs to be run under sudo, so I created a daemon inside of /Library/LaunchDaemons .
My plist file looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
 <key>Disabled</key>
 <false/>
 <key>Label</key>
 <string>my.plist.name</string>
 <key>ProgramArguments</key>
 <array>
 <string>/path/to/script/to/run.sh</string>
 </array>
 <key>WatchPaths</key>
 <array>
 <string>/Library/Preferences/SystemConfiguration/com.apple.airport.pr eferences.plist</string>
 </array>
</dict>
</plist>
So here's where the oddness starts happening. When I start up my computer, launchctl tells me that this daemon is loaded. (I run sudo launchctl list and it's there). However, the script does not run when it should.
However, if I manually unload and then load the plist using the launchctl command then everything works completely fine.
So the question is, why does it work when I load it manually, but not work when the system loads it on startup?
Thanks,
Q

No suspicious message in the console. When I sudo launchctl list it shows up with a 0 in the second field.
The only thing I can find in doing some google-ing is this:
https://managingosx.wordpress.com/2006/05/10/launchd-gotcha/
Which seems to imply that a launch daemon that is watching a file will fail to work if that file doesn't exist at all times. However, I would think that /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist should always exist. So I'm still perplexed.
Right now I have a seomwhat convoluted system set up as the following:
My launch daemon (that needs to run as root) is set to watch a folder ~/random/
Then I have a launch agent which successfully watches for changes in /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist and when it sees them touches a file in ~/random/.
The launch daemon then deletes that file and successfully runs the script I want it to run.
It seems weird/odd/annoying to have to set up a this double-headed process just to do something simple like this, so I'm open to suggestions as to what is going on.

NetworkManager daemon not starting since systemd 208-2 upgrade

Similar Messages

Maybe you are looking for